Listing system component information

I'd like to be able to get (and then display) the system component information in my .NET program using the .NET connector.
(The information contained within System->Status...->Component Information)
Any idea on how to get this info?
(More generally, I find that I often run into the problem of "how do I do xyz"-- and I wonder if there is an RFC to do this somewhere-- and then I spend forever looking for one, sometimes finding what I'm looking for and sometimes not. Is there a "recommended" way of "finding stuff"?)

Hello Tom,
the fm is also available in our 4.6C system. Could you provide some more informations regarding your release.
Think that the rfc is part of the solution manager installation (as the development class is named "Solution manager").
I didn't find another rfc delivering the data. There are only some function modules (w/o rfc flag). Perhaps you can have a look at these fm's (starting with OCS* or SPAM*, e.g. SPAM_READ_PAT03). If one of these delivers the required data, you can modify the fm by setting the rfc flag, or copy it.
Nevertheless, it should be no problem to develop an own rfc, providing the information from database tables UVERS and PAT03.
Best regards
Stephan
Edited by: Stephan Theis on Feb 26, 2008 8:35 AM

Similar Messages

RFM to get System:Component information?

In SAP GUI, under 'System | Status | Components', you see information on the components installed in your system, including Software Component, Release, Level, Highest Support Package, and a Description.
What RFM (RFC) can I call to get that information?
Thanks.
Tim

Hello Tom,
the fm is also available in our 4.6C system. Could you provide some more informations regarding your release.
Think that the rfc is part of the solution manager installation (as the development class is named "Solution manager").
I didn't find another rfc delivering the data. There are only some function modules (w/o rfc flag). Perhaps you can have a look at these fm's (starting with OCS* or SPAM*, e.g. SPAM_READ_PAT03). If one of these delivers the required data, you can modify the fm by setting the rfc flag, or copy it.
Nevertheless, it should be no problem to develop an own rfc, providing the information from database tables UVERS and PAT03.
Best regards
Stephan
Edited by: Stephan Theis on Feb 26, 2008 8:35 AM

Support Pack Status not updated in System Component Information

Hi Experts,
We have installed ECC 6.0 with Ehp3 and AFS 603 on AIX 6.1 and db6 V 9.1. We recently added the Vistex Incentive and Payback Module and Vistex Global Functions Add Ons. After the base install the Support pack 1-4 were applied for both Vistex components. For IRMGLB the status screen (System/Status) shows the SP highest Level = 03, while in SPAM screen it shows that Support Pack for for the Component IRMGLB is imported successfully.Because of this we can not apply the remaining Support Packs. For the other component (IRMIPM) Support Pack level 04 is correctly displayed.
Any idea what are we missing? Any help is greatly appreciated.
Thanks
Suhail

For future referers, Vistex says its a known issue.
Hello,
It is a known issue but it would not impact any of the functionality.
It can only be fixed in the subsequent release with conjunction with
SAP.
Thanks,
Vistex Support

Accessing Component Information for systems connected to Solution Manager

We currently aggregate system component information for our ABAP systems through the following manual (and tedious) process:
Log into each ABAP system
Menu: System -> Status
Click Component Information button (magnifying glass icon)
Retrieve the information: Component, Release, Level, Support Package Name, Description.
Recently, we were drilling through Solution Manager Root Cause analysis -> Change reporting and noticed that this information is available for each system. In the ABAP-Software data store. This led us to consider if this information is contained within the Solution Manager BW cubes.
However when we looked at the SMD Change Analysis (thinking this would map to what we saw in the Change Analysis reporting), we didn't see this information.
So, the question is, does anyone have any thoughts were the Component information for systems is stored in Solution Manager? Ideally, we would like to tap into this source for our own custom report as opposed to retrieving it manually from each system as I described.
Thanks,
Jeff Henke

Hi Jeff,
the information about software components (and this is I think what you are looking for) is stored in the LMDB of Solution Manager. Each satellite system sends its component info into SLD (either in an external system or in Solution Manger itself). From there it is redirected to LMDB.
Try transaction LMDB in Solution Manager. There you have (depending on your SP-Stack) access to several reports to evaluate your landscape.
Best regards, Alexander

Gather the "System status component information" via database table

Hello!
Which SAP/maxdb-table contains the "System status component information" data ?
(i.e all components installed in the Abap-part).
What does a sql statement (via dbmcli) look like to extract this information from that table?
Version of the ABAP AS is NW2004s, maxdb is on 7.6.01.12
Regards,
Fredrik
Message was edited by:
Fredrik Rosengren
Message was edited by:
Fredrik Rosengren

Hello Frederik,
I think you mean table CVERS.
dbmcli -d xxx -u xxx,xxx sql_execute select * from cvers
Something like that.
Regards, Michael

Windows Server 2012 - Hyper-V - Cluster Sharded Storage - VHDX unexpectedly gets copied to System Volume Information by "System", Virtual Machines stops respondig

We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM. This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM. This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched off.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, VMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation:
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with two 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair.
Our Problem:
Our problem is that for some reason a random VHDX gets copied to System Volume Information by "System" of the Clusterd Shared Storage (i.e. C:\ClusterStorage\Volume1\System Volume Information).
All VMs stops responding or responds very slowly during this copy process and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
This happens at random and not every day and different VHDX files from different VMs gets copied each time. Some time it happens during daytime wich causes a lot of problems, especially when a 200 GB file gets copied (which take a lot of time).
What it is not:
We thought that this was connected to the backup, but the backup had finished 3 hours before the last time this happended and the backup never uses any of the files in System Volume Information so it is not the backup.
An observation:
When this happend today I switched on ShadowCopy (previous files) and set it to only to use 320 MB of storage and then the Copy Process stopped and the virtual Machines started responding again. This could be unrelated since there is no way to see
how much of the VHDX that is left to be copied, so it might have been finished at the same time as I enabled ShadowCopy (previos files).
Our question:
Why is a VHDX copied to System Volume Information when scheduled ShadowCopy (previous version of files) is switched off? As far as I know, nothing should be copied to this folder when this functionis switched off?
List of VSS Writers:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Writer name: 'Task Scheduler Writer'
   Writer Id: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
   Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
   State: [1] Stable
   Last error: No error
Writer name: 'VSS Metadata Store Writer'
   Writer Id: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
   Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
   State: [1] Stable
   Last error: No error
Writer name: 'Performance Counters Writer'
   Writer Id: {0bada1de-01a9-4625-8278-69e735f39dd2}
   Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
   State: [1] Stable
   Last error: No error
Writer name: 'System Writer'
   Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
   Writer Instance Id: {7848396d-00b1-47cd-8ba9-769b7ce402d2}
   State: [1] Stable
   Last error: No error
Writer name: 'Microsoft Hyper-V VSS Writer'
   Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
   Writer Instance Id: {8b6c534a-18dd-4fff-b14e-1d4aebd1db74}
   State: [5] Waiting for completion
   Last error: No error
Writer name: 'Cluster Shared Volume VSS Writer'
   Writer Id: {1072ae1c-e5a7-4ea1-9e4a-6f7964656570}
   Writer Instance Id: {d46c6a69-8b4a-4307-afcf-ca3611c7f680}
   State: [1] Stable
   Last error: No error
Writer name: 'ASR Writer'
   Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Instance Id: {fc530484-71db-48c3-af5f-ef398070373e}
   State: [1] Stable
   Last error: No error
Writer name: 'WMI Writer'
   Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
   Writer Instance Id: {3792e26e-c0d0-4901-b799-2e8d9ffe2085}
   State: [1] Stable
   Last error: No error
Writer name: 'Registry Writer'
   Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
   Writer Instance Id: {6ea65f92-e3fd-4a23-9e5f-b23de43bc756}
   State: [1] Stable
   Last error: No error
Writer name: 'BITS Writer'
   Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
   Writer Instance Id: {71dc7876-2089-472c-8fed-4b8862037528}
   State: [1] Stable
   Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
   Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
   Writer Instance Id: {cb0c7fd8-1f5c-41bb-b2cc-82fabbdc466e}
   State: [1] Stable
   Last error: No error
Writer name: 'Cluster Database'
   Writer Id: {41e12264-35d8-479b-8e5c-9b23d1dad37e}
   Writer Instance Id: {23320f7e-f165-409d-8456-5d7d8fbaefed}
   State: [1] Stable
   Last error: No error
Writer name: 'COM+ REGDB Writer'
   Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
   Writer Instance Id: {f23d0208-e569-48b0-ad30-1addb1a044af}
   State: [1] Stable
   Last error: No error
Please note:
Please only answer our question and do not offer any general optimization tips that do not directly adress the issue! We want the problem to go away, not to finish a bit faster!

Hallo Lawrence!
Thankyou for youre reply, some comments to help you and others who read this thread:
First of all, we use Windows Server 2012 and the VHDX as I wrote in the headline and in the text in my post. We have not had this problem in similar setups with Windows Server 2008 R2, so the problem seem to be introduced in Windows Server 2012.
These posts that you refer to seem to be outdated and/or do not apply to our configuration:
The post about Dynamic Disks:
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx is only a recommendation for Windows Server 2008 R2 and the VHD format. Dynamic VHDX is indeed recommended by Microsoft when using Windows Server 2012 (please look in the optimization guide
for Windows Server 2012).
Infact, if we use fixed VHDX then we would have a bigger problem since fixed VHDX are generaly larger then Dynamic Disks, i.e. more data would be copied and that would take longer time = the VMs would be unresponsive for a longer time.
The post "What's the deal with the System Volume Information folder"
http://blogs.msdn.com/b/oldnewthing/archive/2003/11/20/55764.aspx is for Windows XP / Windows Server 2003 and some things has changed since then. for instance In Windows Server 2012, Shadow Copies cannot be controlled by going to Control panel -> System.
Instead you right-click on a Drive (i.e. a Volume, for instance the C drive/Volume) in Computer and then click "Configure Shadow Copies".
Windows Server 2008 R2 Backup problem
http://social.technet.microsoft.com/Forums/en/windowsbackup/thread/0fc53adb-477d-425b-8c99-ad006e132336 - This post is about the Antivirus software trying to scan files used during backup that exists in the System Volume Information folder and we do not
have any antivirus software installed on our hosts as I stated in my post.
Comment that might help us:
So according to “System Volume Information” definition, the operation you mentioned is Volume Shadow Copy. Check event viewer to find Volume Shadow Copy related event logs and post them.
Why?
Furhter investigation suggests that a volume shadow copy is somehow created even though the Schedule for Shadows Copies is turned off for all drives. This happens at random and we have not found any pattern. Yesterday this operation took almost all available
disk space (over 200 GB), but all the disk space was released when I turned on scheduled Shadow Copies for the CSV.
I therefore draw these conclusions:
The CSV Volume has about 600 GB of disk space and since Volume Shadows Copy used 200 GB, or about 33% of the disk space, and the default limit is 10% then I conclude that for some reason the unscheduled Volume Shadow Copy did not have any limit (or ignored
the limit).
When I turned on the Schedule I also change the limit to the minimum amount which is 320 MB and this is probably what released the disk space. That is, the unscheduled Volume Shadow Copy operation was aborted and it adhered to the limit and deleted the
Volume Shadow Copy it had taken.
I have also set the limit for Volume Shadow Copies for all other volumes to 320 MB by using the "Configure Shadow Copies" Window that you open by right clicking on a drive (volume) in Computer and then selecting "Configure Shadow Copies...".
It is important to note that setting a limit for Shadow Copy Storage, and disabaling the Schedule are two different things! It is possible to have unlimited storage for Shadow Copies when the Schedule is disabled, however I do not know if this was the case
Before I enabled Shadow Copies on the CSV since I did not look for this.
I now have defined a limit for Shadow Copy Storage to 320 MB on all drives and then no VHDX should be copied to System Volume Information since they are all larger than 320 MB.
Does this sound about right or am I drawing the wrong conclusions?
Limits for Shadow Copies:
Below we list the limits for our two hosts:
"Primary Host":
C:\>vssadmin list shadowstorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Shadow Copy Storage association
   For volume: (\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\)\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\)\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 320 MB (91%)
Shadow Copy Storage association
   For volume: (E:)\\?\Volume{dc0a177b-ab03-44c2-8ff6-499b29c3d5cc}\
   Shadow Copy Storage volume: (E:)\\?\Volume{dc0a177b-ab03-44c2-8ff6-499b29c3d5cc}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 320 MB (0%)
Shadow Copy Storage association
   For volume: (G:)\\?\Volume{f58dc334-17be-11e2-93ee-9c8e991b7c20}\
   Shadow Copy Storage volume: (G:)\\?\Volume{f58dc334-17be-11e2-93ee-9c8e991b7c20}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 320 MB (3%)
Shadow Copy Storage association
   For volume: (C:)\\?\Volume{e3ad7fec-178b-11e2-93e8-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{e3ad7fec-178b-11e2-93e8-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 320 MB (0%)
C:\>cd \ClusterStorage\Volume1
Secondary host:
C:\>vssadmin list shadowstorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Shadow Copy Storage association
   For volume: (\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\)\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\)\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 35,0 MB (10%)
Shadow Copy Storage association
   For volume: (D:)\\?\Volume{5228437e-9a01-4690-bc40-1df85a0e6736}\
   Shadow Copy Storage volume: (D:)\\?\Volume{5228437e-9a01-4690-bc40-1df85a0e6736}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 27,3 GB (10%)
Shadow Copy Storage association
   For volume: (C:)\\?\Volume{b2951139-f01e-11e1-93e8-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{b2951139-f01e-11e1-93e8-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 6,80 GB (10%)
C:\>
There is something strange about the limits on the Secondary host!
I have not in any way changed the settings on the Secondary host and as you can see, the Secondary host has a maximum limit of only 35 MB storage on the CSV, but it also shows that this is 10% of the Volume. This is clearly not the case since 10% if 600
GB = 60 GB!
The question is, why does it by default set a too small limit (i.e. < 320 MB) on the CSV and is this the cause of the problem? I.e. is the limit ignored since it is smaller than the smallest amount you can provide using the GUI?
Is the default 35 MB maximum Shadow Copy limit a bug, or is there any logical reason for setting a limit that according to the GUI is too small?

How to get the list of component?

    How to get the list of component through java API in Adobe CQ5?

There are probably more than a few ways, but here is a little component .jsp code that uses the jcr query api to pull out all the components and list them on a page. If I know CQ, there might be a way to ask for a list of components another way though, maybe through another API, or possibly a .json url, I might remember reading something about that, somewhere, lol, but this at least gets you the list in a somewhat simple way.
Code Example:
<%@include file="/apps/psul/components/global.jsp"%>
<%@ page import="javax.jcr.*,
                   javax.jcr.query.*"
%>
<%
   // Login to create an anonymous session on the default workspace
   Session session = resourceResolver.adaptTo(Session.class);
       //Declare a query for all the components in the system
       String SQL = "select * from cq:Component";
//side note: if you want just the components in your site area, then make the query more like below...
// SQL = "select * from cq:Component where jcr:path like '/apps/yoursitename/%'";
       QueryManager qm = session.getWorkspace().getQueryManager();
       Query query = qm.createQuery(SQL, Query.SQL);
       QueryResult result = query.execute();
       NodeIterator nodes = result.getNodes();
       while (nodes.hasNext()) {
           Node node = (Node)nodes.next();
           %>
                <p><%=node.getName() %> (<b><%=node.getPath() %></b>)</p>
<%     } %>

Tables for Project System Component

Hi,
I hve the list of standard DS from Project System component. Currently these DS are not active in our ECC system. Now I need to find the Source table for all these DS. Can any one please provide the table name if you have. I searched in sdn/help.sap but I couldn't find any.
Master Data DS:
0ACTIVITY_ATTR
0ACTIVITY_CUST_ATTR
0ACTIVITY_TEXT
0ACTIVITY_USR_ATTR
0ACTY_ELEMT_ATTR
0ACTY_ELEMT_CUST_ATTR
0ACTY_ELEMT_TEXT
0ACTY_ELEMT_USR_ATTR
0CASHDETAIL_TEXT
0CASHTYPE_TEXT
0CLAIM_ATTR
0CLAIM_TEXT
0DATE_EVENT_TEXT
0DATE_SRCE_TEXT
0MILESTONE_ATTR
0MILESTONE_TEXT
0MLST_USE_TEXT
0NAE_INH_ATTR
0NETWORK_ATTR
0NETWORK_CUST_ATTR
0NETWORK_TEXT
0NTW_INH_ATTR
0NWA_INH_ATTR
0ORD_INH_ATTR
0PROJECT_ATTR
0PROJECT_CUST_ATTR
0PROJECT_TEXT
0PS_APPLNO_TEXT
0PS_CHANCE_TEXT
0PS_COMPONT_ATTR
0PS_COMPONT_TEXT
0PS_HERKZ_TEXT
0PS_OBJ_TEXT
0PS_OPPNT_TEXT
0PS_PRJTYPE_TEXT
0PS_RESPNO_TEXT
0SCOPE_TEXT
0STATUSCLM1_TEXT
0STATUSCLM2_TEXT
0STATUSSYS0_TEXT
0WBS_ELEMT_ATTR
0WBS_ELEMT_CUST_ATTR
0WBS_ELEMT_TEXT
0WBS_ELEMT_USR_ATTR
0WBS_ELEMT_WBSH_HIER
0WBS_INH_ATTR
Transactional DS
0PS_CLM_CST
0PS_CLM_ECP
0PS_CSH_NTW
0PS_CSH_NWA
0PS_CSH_ORD
0PS_CSH_WBS
0PS_DAT_MLS
0PS_DAT_NAE
0PS_DAT_NTW
0PS_DAT_NWA
0PS_DAT_PRJ
0PS_DAT_WBS
0PS_KAP_NAE
0PS_KAP_NWA
0PS_NAE_ECP
0PS_NAE_EVA
0PS_NTW_EVA
0PS_NWA_ECP
0PS_NWA_EVA
0PS_ORD_EVA
0PS_WBS_ECP
0PS_WBS_EVA
Regards,
Jackie.

Try to search it at Help.sap.com web page (use search for BI content)
For example for your first extracotr:
http://help.sap.com/saphelp_nw70/helpdata/en/4f/4bc739e033417ae10000000a114084/frameset.htm
Regards,
DL

System Locale Information in AIR application

Hello,
I am building a Adobe AIR application which will have UI in different languages. To change the language in the UI we are setting resourceManager.localeChain property to the locale.
How can I get the system locale information at runtime so that the language can be set at runtime.
I am using Flex SDK 4.0.
Regards,
Karthik

It looks like if you do
var defaultLocaleID = new LocaleID(LocaleID.DEFAULT)
then you can get the language with defaultLocaleID.getLanguage() and the region with defaultLocaleID.getRegion(). But it doesn't give you a list of preferred locales.
Gordon Smith
Adobe Flex SDK Team

BI Patches list and complete information badly in need

Dear Experts
Thanks for opening my Thread. i want to know all the different patches that has to be applied to BI Server.like SAP_OCS, SAP_ABA, SAP BASIS, PIBASIS, SAP_BW,BI_CONT, and what are the kernal patches and ADDONS etc, and how to check the levels applied,plzzzzzzzzzzzzzzzzzz thanks in advance.

Hi,
open an SAP window and select menu 'System' and select 'Status' from that menu.
in the window under SAP system data click on Component information.
This will give all the patches info.
To get info about Kernel,
in the 'Status' menu, in the bottom of the window click on Other Kernel Info.
REDDY
Edited by: Narendra Reddy C on Sep 1, 2008 8:51 AM

Having issues with System Volume Information

Hi All.
I hjave a Ps script that I use to wipe off data from SQL servers as aprt of a decom process.
The script is as follows.
get-childitem F:\ -include *.ldf,*.mdf,*.ndf,*.bak,*.trc,*.txt,*error*,*sqlagent*,*system_heal*,*xel*,*bak*,*logs*,*.mdmp*,*cer* -exclude *System* -recurse | foreach ($_) {remove-item $_.fullname -Force }
At the moment, it runs into issues with a folder. I would either like to delete the folder as well or actually exclude it. Also as an improcement to the script, I would want it to display the list of files it has deleted.
The error that I get is as follows.
remove-item : Access to the path 'F:\System Volume Information' is denied.
At line:1 char:155
+ ... foreach ($_) {remove-item $_.fullname -Force   }
+                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : PermissionDenied: (F:\:String) [Remove-Item], UnauthorizedAccessException
    + FullyQualifiedErrorId : RemoveItemUnauthorizedAccessError,Microsoft.PowerShell.Commands.RemoveItemCommand
Confirm
The item at F:\ has children and the Recurse parameter was not specified. If you continue, all children
will be removed with the item. Are you sure you want to continue?
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"):
Thanks in advance.

Hi MrFlinstone,
I’m writing to just check in to see if the suggestions were helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

SBS2011 huge system volume information

I have a server with a 1TB hd and over 600GB in System Volume Information. Shadow copies not issue. It is growing every day. How can I access and it and what is safe to delete and how do you prevent it from growing?

Hi Wardo, this seems to be shadow copy related files. You can check if the following command is helpful:
1. To see the space allocated and used for SVI:
- Open Command Prompt with “Run as Administrator” option
- Type in: vssadmin list shadowstorage
- You will see Used Space, Allocated Space and Maximum Space for SVI
2. To see the restore information stored therein:
- Use in the same console command: vssadmin list shadows
3. To resize the maximum allocated space:
- Type in command: vssadmin resize shadowstorage /on=[here add the drive letter]: /For=[here add the drive letter]: /Maxsize=[here add the maximum size]
E.g., vssadmin resize shadowstorage /on=C: /For=C: /Maxsize=4GB
- You will see a prompt confirming resize done
- You can check the status again using the command discussed in point 1 above
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Coding the "List" Flash Component

Hello,
I’m designing a simple list creation\editing
application I was wondering where I can get information on coding
the “List” Flash Component in Director MX 2004.
I’ve got as far as finding out how change what is on the list
using “.data” and “.labels”, but I want to
be able to tell what the user selects from the list.
Thanks for your time

You can use an on change function in a behavior attached to
the flash
sprite.
property thisSprite
on beginSprite me
thisSprite = me.spriteNum
sprite(thisSprite).labels = ["one","two","three"]
on change me
put sprite(thisSprite).selectedItem.label
end
-- "one"
Rob
Rob Dillon
Adobe Community Expert
http://www.ddg-designs.com
412-243-9119
http://www.macromedia.com/software/trial/

Error while reading the PO in the Backend system. Inform system admin

Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
Teja

I am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna

List view component not being ordered

I am using the list view component to represent my table data. for creating a new row, i use a popup which has a separate taskflow in which i create a new row. Now i need to refresh the list view component after this new row is created. I am doing that using contextual events. I just re execute the query of the vo based on which the list view component is made. But in order to get the in memory rows, i set the view objects query mode to scan view rows as well as entity based rows. This however makes the vo query's order by clause to not work. I am not sure why but the list view data is no longer ordered.
Also if anyone has any idea how to refresh the entire list view component, that is load data again, it would be of great help.
Thanks in advance,
Jithesh

Hey,
I'm new at this so i'm going to try to help (although it problably won't work or do what you want).
You said you want to refresh the entire list view component, well, normally i have my views/data controls connected to a binding variable in my bean class and if i want to update something (lets say a selection) i use this code:
AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance();
adfFacesContext.addPartialTarget(dimFactSales);
dimFactSales = variable binded to one of my views.
Hope that helps,
Frederico.

Listing system component information

Similar Messages

Maybe you are looking for