Listner is not starting up !!!!

Hi All,
I am not able to start the listner. It gives following error:-
[oracle@ebs ~]$ lsnrctl status VIS
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 24-NOV-2012 16:38:20
Copyright (c) 1991, 2008, Oracle. All rights reserved.
TNS-01101: Could not find service name VIS
[oracle@ebs ~]$ lsnrctl start VIS
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 24-NOV-2012 16:38:31
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting /u01/oraR12/db/tech_st/11.1.0//bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
Log messages written to /u01/oraR12/db/tech_st/11.1.0/log/diag/tnslsnr/ebs/vis/alert/log.xml
TNS-01151: Missing listener name, VIS, in LISTENER.ORA
Listener failed to start. See the error message(s) above...
[oracle@ebs ~]$
tnsping gives following error:-
[oracle@ebs ~]$ tnsping VIS
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 24-NOV-2012 16:44:21
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
TNS-03505: Failed to resolve name
[oracle@ebs ~]$
Entries in the LISTNER.ORA file is as below :-
VIS =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ebs.mydomain.com)(PORT = 1521))
SID_LIST_VIS =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME= /u01/oraR12/db/tech_st/11.1.0)
(SID_NAME = VIS)
STARTUP_WAIT_TIME_VIS = 0
CONNECT_TIMEOUT_VIS = 10
TRACE_LEVEL_VIS = OFF
LOG_DIRECTORY_VIS = /u01/oraR12/db/tech_st/11.1.0/network/admin
LOG_FILE_VIS = VIS
TRACE_DIRECTORY_VIS = /u01/oraR12/db/tech_st/11.1.0/network/admin
TRACE_FILE_VIS = VIS
ADMIN_RESTRICTIONS_VIS = OFF
SUBSCRIBE_FOR_NODE_DOWN_EVENT_VIS = OFF
"listener.ora" 46L, 1160C
Please help.
Thanks in advance.
Edited by: 963696 on 24-Nov-2012 08:36

Please post the details of the application release and OS.
I am not able to start the listner. It gives following error:-
[oracle@ebs ~]$ lsnrctl status VIS
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 24-NOV-2012 16:38:20
Copyright (c) 1991, 2008, Oracle. All rights reserved.
TNS-01101: Could not find service name VIS
[oracle@ebs ~]$ lsnrctl start VIS
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 24-NOV-2012 16:38:31
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting /u01/oraR12/db/tech_st/11.1.0//bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
Log messages written to /u01/oraR12/db/tech_st/11.1.0/log/diag/tnslsnr/ebs/vis/alert/log.xml
TNS-01151: Missing listener name, VIS, in LISTENER.ORA
Listener failed to start. See the error message(s) above...
[oracle@ebs ~]$
Entries in the LISTNER.ORA file is as below :-
VIS =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ebs.mydomain.com)(PORT = 1521))
SID_LIST_VIS =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME= /u01/oraR12/db/tech_st/11.1.0)
(SID_NAME = VIS)
STARTUP_WAIT_TIME_VIS = 0
CONNECT_TIMEOUT_VIS = 10
TRACE_LEVEL_VIS = OFF
LOG_DIRECTORY_VIS = /u01/oraR12/db/tech_st/11.1.0/network/admin
LOG_FILE_VIS = VIS
TRACE_DIRECTORY_VIS = /u01/oraR12/db/tech_st/11.1.0/network/admin
TRACE_FILE_VIS = VIS
ADMIN_RESTRICTIONS_VIS = OFF
SUBSCRIBE_FOR_NODE_DOWN_EVENT_VIS = OFF
"listener.ora" 46L, 1160C What does "echo $TNS_ADMIN return?
What is the location of the listener.ora file you posted above?
Does the listener.ora file exist under $ORACLE_HOME/network/admin/$CONTEXT_NAME directory?
Please post the contents of /etc/hosts file here.
Thanks,
Hussein

Similar Messages

Listner is not start-multiple instace

hi,
I have created two oracle home , one is on D:\ and other is on C:\ . D drive instance is running fine .C dirve instance its not running.
oracle services is pointing to C dirve executiable path, and while i tried to start the listner its not start. both are running different ports.
while i try to stat listner
LSNRCTL> start listner_hrdw
Starting tnslsnr: please wait...
Failed to start service, error 0.
TNS-12560: TNS:protocol adapter error
what is the problem?
Thanks.

yeah their is one reason, every week end one instance will down .
So at that time other isntance have to up.
I am using same oracle version.
thanks,

Listner is not starting

Hi
I get error as
ORA-12514: TNS:listener doesnot currecntly know of service requested in connect discptritor
I checked on server listner is up as
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dummy2069)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 10.2.0.1.0 - Production
Start Date 17-NOV-2006 17:35:35
Uptime 0 days 0 hr. 6 min. 4 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
Listener Log File C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dummy2069)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Services Summary...
Service "ORCL2069." has 1 instance(s).
Instance "orcl2069", status READY, has 1 handler(s) for this service...
Service "ORCL2069." has 1 instance(s).
Instance "orcl2069", status READY, has 1 handler(s) for this service...
Service "ORCL2069XDB." has 1 instance(s).
Instance "orcl2069", status READY, has 1 handler(s) for this service...
Service "ORCL2069_XPT." has 1 instance(s).
Instance "orcl2069", status READY, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "test123" has 1 instance(s).
Instance "test123", status READY, has 1 handler(s) for this service...
Service "test123XDB" has 1 instance(s).
Instance "test123", status READY, has 1 handler(s) for this service...
Service "test123_XPT" has 1 instance(s).
Instance "test123", status READY, has 1 handler(s) for this service...
The command completed successfully
My tns entry is also correct
as
ORCL2069 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.122)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL2069)
how to resolve it ?

Had a similar problem then added the following:
(SERVICE_NAME = ORCL2069.your domain)
SQL> show parameter db_domain
$ lsnrctl reload
$ tnsping ORCL2069.domain
Cheers
Justin Miles

TNS Listner not starting on W2K

I am trying to install Oracle 8.0.3 on W2K system.Oracle server is working fine.But When
I am trying to install server side SQL* net,
I am getting an error like 'Cannot delete V2
listner for Windows NT'. And then it fails.
And the listner is not starting when I am tring to start it up from windows services.
I need expert advice for this.
Thanks in advance.
winnie philip

I think that you would like to try running oracle Net8 Assistant and remove any unnecessary protocols that the listener is listening to.

OracleOraDb10g_home1TNSListener service does not start

I am using Win XP. I have installed Oracle 10g.
OracleOraDb10g_home1TNSListener service does not start. If started manually, it automatically gets stopped.
As result, if I connect to Orcale 10 database through Java, I get Network Adapter error.
what I need to do for OracleOraDb10g_home1TNSListener service to start after clicking 'Start' on it through Services in Control Panel/Admin Tools
Thanks

Oracle installation was successful.
after lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-MAR-2006 23:03
:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=uc-52b3c4f41f58.er
c-wireless.uc.edu)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
Listener failed to start. See the error message(s) above...
After correcting Host in listner.ora, listner started. However before making this change, this service was getting started though listener.ora had wrong host name.
Thanks.

Getting this error when running a form. HTTP Listner is not available

I am using windows XP Professional. I have the 9i database running fine. I can launch form developer and connect to my database (which is on the same machine but in different homes.) I get a Http listner error no available when I go to run the form. I looked at my administrative settings for the HTTP listner service but I do not see it I only see the TNS lister.
Does any one know what I need to do run a form successfuly with getting the HTTP listner error

Hi,
to start OC4J you go to start--> programs --> Oracle9i Developer Suite --> Forms Developer --> Start OC4J Instance
Frank

OAM: Deny On Not Protected, oc4j_soa is not starting correctly

Hi,
I have protected our soa suite with Oracle Access Manager, the webgate is protecting everything because "Deny On Not Protected" is enabled. I made an policy for all the default resources in the application server:
/em,/BPELConsole,/BPELAdmin,/ccore,/esb,/coreman,/policymanager,/gateway,/esb-dt,/deploy_service,/esb-rt,/hw_services,/orabpel,/ruleauthor,/rulehelp,/event,/integration,/bpel,/orainfra,/IdentityService,/javasso,/ascontrol,/datatags,/j2ee,/dms0.
Authentication Scheme Anonymous Authentication
But when we try to start the oc4j_soa container the BPEL processes are not shown in the BPELConsole. When we disable the
<LocationMatch "/*">
AuthType Oblix
require valid-user
</LocationMatch>
in the httpd.conf the oc4j_soa container is starting without any problems.
Is there any way to see what is blocked by the webgate? I put the access server logging on debug but I cannot find the problem.
I hope anyone can help me!
Kind regards,
Arjan

Problem solved, this was because of my DB listner was not properly UP.
Thanks
Satendra Pare

Listener not starting up

oracle database 8i
OS windows 2000 server
listener not starting
following is the error message from udump
network error encountered setting up listening port
listening address for dispatcher is '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'
NS Primary Error: TNS-12532: TNS:invalid argument
NS Secondary Error: TNS-12560: TNS:protocol adapter error
NT Generic Error: TNS-00502: Invalid argument
32-bit Windows Error: 22: Invalid argument

Arun,
Check your listener.ora file whether the entries are proper or not, if not using oracle net configuration assistant configure listner,servicename.

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Error "can not start the configuration in parallel does not correct"

Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!

Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

Can not start data Collection service

I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
I also could not stop it. I rebooted the server and the status for this service is in starting.
Thanks,

Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server. Have you considered using a newer version of FM Server?

I can not start secion in creative cloud from a macbook

I can not start secion in creative cloud from a macbook, always comes CERRO secion, and never I log in I can not start secion indesign folio builder fails me in muse could not enter if you remove it to install again, now I can not download, I tried / Library / Application Support / Adobe / OOBE rename the folder to OOBE_old setup Guide, and simply does not work, if we are paying the membership of adobe creative cloud, at least ask for is a solution, timely responses because we are losing time and therefore money, if they are solving a problem is better than what we say and if more users seek solutions and only wait.
En español.
No puedo iniciar secion en creative cloud desde una macbook, siempre sale CERRO SECION, y nunca me conecto, en indesign no puedo iniciar secion de folio builder me da error, en muse tampoco podia entrar a si que lo elimine para poder instalar nuevamente, ahora no puedo descargar, he intentado / Library / Application Support / Adobe / OOBE cambiar el nombre de la configuración rápida carpeta para OOBE_old, y simplemente no funciona, si nosotros estamos pagando la membresia de adobe creative cloud, lo menos que pedimos es una solucion, respuestas oportunas porque estamos perdiendo tiempo y consecuencia dinero, si estan resolviendo algun problema es mejor que lo digan y a si nosotros los usuarios no buscamos mas soluciones y solamente esperaremos.
we want a valid and positive response

Hello, could you please try the steps posted here: http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
Please let me know if you are successful or not.

Can not start Enterprise Manager web page

I can not start Enterprise Manager web page.
Here is my steps:
1. Start enterprise manager
emctl start
Waiting for EM to initialize ...Started
2. Check status:
emctl status
EMD is up and running : 200 OK
3. Start the web page
http://myhost:1810/
4. get following error
"There was no response. The server could be down or is not responding"
System info:
Database: 8.1.7.2
OAS: 9.2.0.2
JDK: 1.3.0_02
Server OS: SunOS 5.8
My question is where is the log file of enterprise manager and what the problem is.
Thanks in advance
Don

diego,
Thank you for your help. when I try your command I get following error:
emctl start iasconsole
Unknown command option
Usage::
emctl start|stop|status
emctl reload | upload
emctl set credentials [<Target_name>[:<Target_Type>]]
emctl gencertrequest
emctl installcert [-ca|-cert] <certificate base64 text file>
emctl set ssl test|on|off|password [<old password> <new password>]
emctl set password <new pwd>
emctl authenticate <pwd>
emctl switch home [-silent <new_home>]
emctl config <options>
emctl config options can be listed by typing "emctl config"

"can not start a job" issue in AWM

Hi ALL,
I am maintaining my cube from PLSQL with following options
1. buildtype = "BACKGROUND"
2. trackstatus = "true"
3. maxjobqueues = 3
i get following error when i see the "olapsys.xml_load_log" table
***Error Occured: Failed to Build(Refresh) DB_OWNER.MY_ANALYTICAL_WORKSPACE Analytic Workspace. Can not start a job.
Can anybody explain when and why this error occurs? I have wasted a lot of time searching for this issue, but have found no person facing such issue.
Hi Keith, it will be great if you can answer this one.
My database version is 10.2.0.4.0 and AWM version is also 10.2.0.3.0
Kind Regards,
QQ
Message was edited by:
dwh_10g

Applies to:
Oracle OLAP - Version: 10.1 to 11.1
This problem can occur on any platform.
Symptoms
- We have an AW maintenance / refresh script or procedure that contains BuildType="BACKGROUND", so that the AW maintenance task will be sent to the Oracle Job queue.
- When we execute the AW maintenance / refresh script or procedure, we do not get any errors in the foreground, the script/procedure has been executed successfully.
- However when we look into the build/refresh log (see <Note 351688.1> for details) we see that the maintenance/refresh task failed with:
13:29:39 Failed to Submit a Job to Build(Refresh) Analytic Workspace <schema>.<AW Name>.
13:29:39 ***Error Occured in BUILD_DRIVER
- In the generated SQL trace for the session of the user who launches the AW build/refresh script or procedure, we see that ORA-27486 insufficient privileges error occurred at creation of the job.
We see from the relevant bit of the SQL trace that err=27486 occured while executing the #20 statement which is 'begin DBMS_SCHEDULER.CREATE_JOB ...', and the statement is parsed and tried to be executed as user having uid=91:
PARSING IN CURSOR #20 len=118 dep=2 uid=91 oct=47 lid=91 tim=1176987702199571
hv=1976722458 ad='76dd8bcc'
begin
DBMS_SCHEDULER.CREATE_JOB(:1, 'plsql_block', :2, 0, null, null, null,
'DEFAULT_JOB_CLASS', true, true, :3); end;
END OF STMT
PARSE
#20:c=1000,e=1100,p=0,cr=0,cu=0,mis=1,r=0,dep=2,og=1,tim=1176987702199561
EXEC #20:c=65990,e=125465,p=10,cr=1090,cu=3,mis=1,r=0,dep=2,og=1,tim=
1176987702325167
ERROR #20:err=27486 tim=465202984
Cause
User who tries to create a job (executes DBMS_SCHEDULER.CREATE_JOB() procedure) does not have the sufficient privileges.
Solution
1. Identify the user under which the job is supposed to be created. This user is not necessarily the same as the user who launched AW build/refresh script or procedure. Get the corresponding username from one of the %_USERS views e.g. from ALL_USERS.
e.g.
SELECT user_id,username FROM all_users WHERE user_id=91;
2. Identify the system privileges currently assigned to the user by connecting as the user whom the privileges need to be determined, and execute:
SELECT * FROM SESSION_PRIVS ORDER BY PRIVILEGE;
3. Ensure that the CREATE JOB privilege is listed.
The CREATE JOB privilege can be granted in various ways to a user:
- via role OLAP_USER or via role OLAP_DBA (see view ROLE_SYS_PRIVS for what privs are assigned to a role):
GRANT OLAP_USER TO <username>;
- explicitly
GRANT CREATE JOB TO <username>;

System PI 7.11 will not start because of R3INLPGM error

Dear experts,
our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
On the source node the PI system starts without any problems. If we switch over to the target node,
the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
ran under QUSRWRK.
In the pool files from SAPSTART we found the following errors:
QPRINT:
R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
QPJOBLOG:
*NONE      Information                 XXXXXXX SAPINLPGM    XXXXXXX *STMT    SAPINLPGM   XXXXXXX *STMT
                                     From module . . . . . . . . :   O4TMKLIBIX
From procedure . . . . . . :   prtjoblA
Statement . . . . . . . . . :   15
To module . . . . . . . . . :   O4TMKLIBIX
To procedure . . . . . . . :   prtjoblA
Statement . . . . . . . . . :   15
Message . . . . :   SAPINLPGM: Error in ChangeGidToR3GROUP - check whether
                                     R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority
But the authority from all libs and objects are same as on the source machine.
Any idea?
Best regards,
Matthias

Hello Matthias,
Please log on as QSECOFR (or a user with SECOFR authority),
ADDLIBLE SAPXIP71
and run command
FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
Best regards,
B. Wolf

Listner is not starting up !!!!

Similar Messages

Maybe you are looking for