LISTNER PROBLEM
Hi friends,
I am in serious problem. I am using AIX, oracle 9, sap4.7
I restore the data files ,orarach,redolog from PRD server to Dummy PRD server(both have same SID & same palteform)
now when i start the listner than it gives a error
Started with pid=692428
Error listening on: (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
IBM/AIX RISC System/6000 Error: 67: Address already in use
And when i reboot the system than it gives an error:-
tegaprod:oraprd 1> lsnrctl start
exec(): 0509-036 Cannot load program lsnrctl because of the following errors:
0509-130 Symbol resolution failed for lsnrctl because:
0509-136 Symbol __pth_init (number 296) is not exported from
dependent module /usr/lib/libpthreads.a[shr_xpg5_64.o].
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
I ALSO posted this thread on unix form .
Link: [url]listner problem
Please help me
Thanks & Regards
Karan
Edited by: karan Singh on May 9, 2008 1:10 PM
Hi
check Note 723147 - ORA-12542: TNS: address already in use
regards,
kaushal
Similar Messages
-
Hi,
Oracle Version:11.2.0.1.0
Operating system:Linux
We just installed the 11g software and created a database but unable to connect the database through client .
status:Failure-Test failed:Listener refused the connection with the following error:ORA-12505,Tns:listner does not currently know of sid given in connect descriptor The connection descriptor used by the client was:192.168.3.14.........Here is my lisnter.ora file.
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oel5-11gr2.localdomain)(PORT = 1521))
ADR_BASE_LISTENER1 = /u01/app/oracle
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.3.143)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle[oracle@virdemo app]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 14-DEC-2009 04:07:57
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/virdemo/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.143)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 14-DEC-2009 04:07:57
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/virdemo/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.143)(PORT=1521)))
The listener supports no services
The command completed successfully
and my tnsnames.ora# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
CAPTURE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oel5-11gr2.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = capture)Hi,
I was able to start the listener but unable to connect to database through client and i am getting error like this.
status:Failure-Test failed:Listener refused the connection with the following error:ORA-12505,Tns:listner does not currently know of sid given in connect descriptor The connection descriptor used by the client was:192.168.3.14.........Here is my listner.ora file
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.3.143)(PORT = 1521))
[oracle@virdemo admin]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 14-DEC-2009 06:45:38
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/virdemo/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.143)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 14-DEC-2009 06:45:38
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/virdemo/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.143)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@virdemo admin]$ -
OMS job - start listner problem
Dear all
i am trying to create a simple job to start listener on target machine
target machine :
OS : linux redhat 4.5
oracle database :10.2.0.3
database home : /u01/app/oracle/product/10g
agent : 10.2.0.5.0
agent home : /u01/app/agent10g
so
i created a job to start listener
os command , listner , %OracleHome%/bin/lsnrctl start ........
when the listener is already up
it return
Output Log
LSNRCTL for Linux: Version 10.2.0.3.0 - Production on 28-JUN-2010 12:53:11
Copyright (c) 1991, 2006, Oracle. All rights reserved.
TNS-01106: Listener using listener name LISTENER has already been started
and its normal
but when listener is down
it return
Output Log
LSNRCTL for Linux: Version 10.2.0.3.0 - Production on 28-JUN-2010 11:27:18
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Starting /u01/app/agent10g/bin/tnslsnr: please wait...
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 2: No such file or directory
when i try to create job to see listener status
os command , listner , %OracleHome%/bin/lsnrctl status , ........
it return
LSNRCTL for Linux: Version 10.2.0.3.0 - Production on 28-JUN-2010 13:03:37
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.12.100.32)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
and its correct
please can any one tell me way the OMS job read "agent home" instead of "database home" when i just try to start the listener and its work correct when ask for statustarget.xml is
<Targets AGENT_TOKEN="1c8043388202dfd33a5340281755d2d7e7a93dc1">
<Target TYPE="oracle_emd" NAME="HOBANKST:3872"/>
<Target TYPE="host" NAME="HOBANKST"/>
<Target TYPE="oracle_listener" NAME="LISTENER_HOBANKST">
<Property NAME="ListenerOraDir" VALUE="/u01/app/oracle/product/10g/network/admin"/>
<Property NAME="LsnrName" VALUE="LISTENER"/>
<Property NAME="Machine" VALUE="HOBANKST"/>
<Property NAME="OracleHome" VALUE="/u01/app/oracle/product/10g"/>
<Property NAME="Port" VALUE="1521"/>
</Target>
<Target TYPE="oracle_database" NAME="HOBANKST">
<Property NAME="OracleHome" VALUE="/u01/app/oracle/product/10g"/>
<Property NAME="UserName" VALUE="dbsnmp"/>
<Property NAME="MachineName" VALUE="HOBANKST"/>
<Property NAME="Port" VALUE="1521"/>
<Property NAME="SID" VALUE="HOBANKST"/>
<Property NAME="password" VALUE="54b4de5c80204622" ENCRYPTED="TRUE"/>
<Property NAME="Role" VALUE="NORMAL"/>
</Target> -
Hi:
I am implementing action listner
htmlCommandButton.addActionListener(new ImgButtonListener());
public static class ImgButtonListener implements ActionListener <--------- code executes till here
@Override
public void processAction(ActionEvent ae)throws AbortProcessingException <---- This mehod is never called ???:(
System.out.println("I am button");
}Any Idea
Thankyou in advance,
dexterHi:
I figured it out. :P It might help other who deal with dynamic Faces. DON'T include form within form. Check html code generated by your program if is form within form then it is bad. get rid of all forms there can only be one form for all components. i.e.
TextInput custom control has its own form
You embedded this control in your page them it inherit its "form" tag too. Keep this in mind
Cheers,
DDexter -
Hi,
Oracle Version : 10.2.0.1
Operating System : windows Xp
When i start the listener it is showing that listener is not supports no servies.what is the changes i want to do .Here is my listener file output and tnsnames.ora file
LISTENER
# listener.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER_rman =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = poor)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1))
(SID_DESC =
(SID_NAME = prasad)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
(SID_DESC =
(SID_NAME = stand)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
(SID_DESC =
(SID_NAME = oracle)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
LISTENER_rman =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.85)(PORT = 1521))
)TNSNAMES.ORA
# tnsnames.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
# tnsnames.ora Network Configuration File:E:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
ORACLE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.85)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = oracle)
RCLON =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.85)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = RCLON)
(UR = A)
stand =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.85)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = stand)
(UR = A)
poor =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.85)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = poor)
(UR = A)
PRASAD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.85)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prasad)
(UR = A)
POORSTAND =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.85)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = poorstand)
(UR = A)
VTLDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.3.200)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = VTLDB)
(UR = A)
)lsnrctl staus
C:\Documents and Settings\poornaprasads>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 15-SEP-2009 12:54:07
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to E:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vtlsys2-85.virinchi.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 15-SEP-2009 12:54:12
Uptime 0 days 0 hr. 0 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Listener Log File E:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vtlsys2-85.virinchi.com)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Documents and Settings\poornaprasads>Regards,
PoornaHi,
As you mentioned i stop running listner and started the new listner but it is showing the same error.Here is my log file output.
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 15-SEP-2009 14:12:04
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to E:\oracle\product\10.2.0\db_1\network\log\listener_rman.log
Trace information written to E:\oracle\product\10.2.0\db_1\network\trace\listener_rman.trc
Trace level is currently 0
Started with pid=4944
TNS-01151: Missing listener name, LISTENER_rman, in LISTENER.ORA
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 15-SEP-2009 14:13:11
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to E:\oracle\product\10.2.0\db_1\network\log\listener_rman.log
Trace information written to E:\oracle\product\10.2.0\db_1\network\trace\listener_rman.trc
Trace level is currently 0
Started with pid=4216
TNS-01151: Missing listener name, LISTENER_rman, in LISTENER.ORA
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 15-SEP-2009 14:41:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to E:\oracle\product\10.2.0\db_1\network\log\listener_rman.log
Trace information written to E:\oracle\product\10.2.0\db_1\network\trace\listener_rman.trc
Trace level is currently 0
Started with pid=4740
TNS-01151: Missing listener name, LISTENER_rman, in LISTENER.ORA
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 15-SEP-2009 14:42:32
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to E:\oracle\product\10.2.0\db_1\network\log\listener_rman.log
Trace information written to E:\oracle\product\10.2.0\db_1\network\trace\listener_rman.trc
Trace level is currently 0
Started with pid=1332
TNS-01151: Missing listener name, LISTENER_rman, in LISTENER.ORA
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 15-SEP-2009 14:43:02
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to E:\oracle\product\10.2.0\db_1\network\log\listener_rman.log
Trace information written to E:\oracle\product\10.2.0\db_1\network\trace\listener_rman.trc
Trace level is currently 0
Started with pid=3584
TNS-01151: Missing listener name, LISTENER_rman, in LISTENER.ORA
C:\Documents and Settings\poornaprasads>lsnrctl stop
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 15-SEP-2009 14:41:36
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
The command completed successfully
C:\Documents and Settings\poornaprasads>lsnrctl start LISTENER_rman
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 15-SEP-2009 14:41:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to E:\oracle\product\10.2.0\db_1\network\log\listener_rman.log
TNS-01151: Missing listener name, LISTENER_rman, in LISTENER.ORA
Listener failed to start. See the error message(s) above...
{coded} -
hi iam using oracle 10.2. i get a problem when i am try to start oracle .
error:
C:\Documents and Settings\Administrator>sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Apr 2 11:09:18 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba;
Connected to an idle instance.
SQL> startup open;
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_ORCL'
SQL> exit
Disconnected
C:\Documents and Settings\Administrator>sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Apr 2 11:20:46 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba;
Connected to an idle instance.
SQL> startup open;
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_ORCL'
SQL>
lisner file:
# listener.ora Network Configuration File: D:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_orcl =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = d:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
orcl =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.140.47.85)(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
tnsname :
# tnsnames.ora Network Configuration File: D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.140.47.85)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
please help me what chang i shoud need to be change...........Example : On Windows
CREATE PFILE='c:\initORCL.ora' from spfile;
Shutdown immediate
open the file c:\initORCL.ora and remove the LOCAL_LISTENER parameter
startup PFILE='c:\initORCL.ora'
CREATE SPFILE from PFILE='c:\initORCL.ora'; -
-bash-2.05b$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 06-MAR-2007 16:34:27
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server//bin/tnslsnr: please wait...
TNS-12537: TNS:connection closed
TNS-12560: TNS:protocol adapter error
TNS-00507: Connection closed
Linux Error: 29: Illegal seekAdd in the /etc/hosts the IP of the machine and the hostname
Example:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.1.200 my_hostname
That should do the trick !!! [Don't put that exact IP and Hostname replace with your own ] -
Hi,
when i try to start the oracle Listener by the following command lsnrctl start i get this error:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 02-JUN-2009 15:24:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Message 1070 not found; No message file for product=network, facility=TNSTNS-12545: Message 12545 not found; No message file for product=network,facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
TNS-00515: Message 515 not found; No message file for product=network, facility=TNS
Linux Error: 2: No such file or directory
thanxSet your environment correctly according to the installation guide. Obviously lsnrctl is in the path,but ORACLE_HOME is not known or invalid.
Werner -
Problems starting Oracle Net Listner on Kubuntu
I have installed Oracle XE on Kubuntu.
Everything went fine... except the net listner.
When I try to start the deamon using
/etc/init.d/oracle-xe start
it stays in the following line for a very long time...
Starting Oracle Net Listner.
If I try to open the url:
http://127.0.0.1:8080/apex
it says unable to establish connection with the server.
Can someone help me solve this problem. I have to get this server running at the earliest.Oracle itself is working? Please try the following:
Login with the oracle user
Set your environment with . /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh (please use also the "." in front of the script)
Connect to oracle instance via sqplus / as sysdba
If the database is up and running, the next thing would be to check if a firewall or SELINUX is active.
C. -
Install oracle 10xe listner port problem
hi,
i hv use fedora 4 and oracle 10g xe univ.rpm install in fedora 4 ,
but when i hv configure database
/etc/init.d/oracle-xe configure
then listner default port is 1521 i hv enter and message is display this port is another application is use pls enter another port . i hv enter 1522 port
its a problem for database if listner port is change?
after 1522 port is enter database succsfully loadRamkrishna,
it is no problem to run the listener on port 1522.
Regards, Marc -
hi all I setup hetroganous getway to connect to sybase
but when I start the listener I found:
LSNRCTL> start
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is d:\oracle\product\10.2.0\tg_1\network\admin\listener.or
a
Log messages written to d:\oracle\product\10.2.0\tg_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mghita.DOMAIN.ITSOFT.COM
)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 02-JAN-2008 10:47:42
Uptime 0 days 0 hr. 0 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File d:\oracle\product\10.2.0\tg_1\network\admin\listener.o
ra
Listener Log File d:\oracle\product\10.2.0\tg_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mghita.DOMAIN.ITSOFT.COM)(PORT=1521)
Services Summary...
Service "tg4sybs" has 1 instance(s).
Instance "tg4sybs", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
********************* my listner.ora
# listener.ora Network Configuration File: d:\oracle\product\10.2.0\tg_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = tg4sybs)
(ORACLE_HOME = d:\oracle\product\10.2.0\tg_1)
(PROGRAM = hsodbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = mghita.DOMAIN.ITSOFT.COM)(PORT = 1521))
**********************my tnsnames.ora
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = tg4sybs)
(PRESENTATION = RO)
*****************my inittg4sybs.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for the Transparent Gateway for Sybase
# HS init parameters
HS_FDS_CONNECT_INFO=phx_ora.phoenix
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
# Environment variables required for Sybase
#set SYBASE="c:\\sybase"the output of tnsping :
C:\Documents and Settings\mghita>tnsping tg4sybs
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 02-JAN-2
008 14:57:10
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
d:\oracle\product\10.2.0\tg_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp) (HOST=mghita.DOMAIN.
ITSOFT.COM) (PORT=1521)) (CONNECT_DATA=(SID=tg4sybs)) (HS=OK))
OK (20 msec)
C:\Documents and Settings\mghita>
and sqlnet.ora
*****************************sqlnet.ora
# sqlnet.ora Network Configuration File: d:\oracle\product\10.2.0\tg_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT) -
DB and listner auto start with linux problem
Dear all :
i can't set DB auto start with linux
my db version 10g linux 5
I followed these steps :
edit the "/etc/oratab" file setting the restart flag for each instance to 'Y'.
TSH1:/u01/app/oracle/oracle/product/10.2.0/db_1:Y
create a file called "/etc/init.d/dbora" as the root user, containing the following.
#!/bin/sh
# chkconfig: 345 99 10
# description: Oracle auto start-stop script.
# Set ORA_HOME to be equivalent to the $ORACLE_HOME
# from which you wish to execute dbstart and dbshut;
# Set ORA_OWNER to the user id of the owner of the
# Oracle database in ORA_HOME.
ORA_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
ORA_OWNER=oracle
if [ ! -f $ORA_HOME/bin/dbstart ]
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
'start')
# Start the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl start"
su - $ORA_OWNER -c $ORA_HOME/bin/dbstart
'stop')
# Stop the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c $ORA_HOME/bin/dbshut
su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl stop"
esac
chmod 750 /etc/init.d/dbora
chkconfig --level 345 dbora on
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dboraFollow this part of Oracle Doc,
Automating Shutdown and Startup
http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#sthref249
Also run your script manually see if it will run sucessfully.
/etc/init.d/dbora start
/etc/init.d/dbora stop -
Connection problem with new database
Hi
Installed new database on my windows machine successfully
while connectting as sys user error
ORA-12500:TNS: listner failed to start dedicated server process
wlile connecting toad and sqlplusPlease read the error again "listner failed to start dedicated server process". Means what, listner listened your request to connect, it tried to hand-off the connect request but due to resources problem (lack of memory) it is not possible to start server process; i.e. presumably the server is very busy at that time. If you are not able to resolve the issue, please check the unwanted services and stop them in strat-run-services.msc.
More information can be found at below link too:
Re: ORA-12500
HTH
Girish Sharma -
Unable to Start Listner for 10g R2 after windows xp pro restart.
Database worked just fine until a system reboot after installing the Apache server and Apex 2.2 The service start and I'm able to connect to the database SQL*PLUS without specifying the host string
SQL*PLUS
User Name: xxxxx
Password : xxxxx
Host String: <Blank>
connect without any problem.
Once I include the orcl name I can't connect and get the following error message
TNS-12541: TNS: no listner
LSNRCTL> start
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL>
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
#Oracle Database 10g Enterprise Edition\
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listner.ora as following
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
I have another home for the Apache Server.
Everything was just fine, Oracle, Apache, EM, and Apex.
I checked the path for windows it looks good, checked the registery looks good, two homes listed.
When I check the status for the LISTNER is win Service it show start
OracleOraDb10g_home1TNSListener
I have another listner OracleOraDb10g_home1TNSListenerLISTNER1 I don't know why it's there?
TNSPING ORCL WORKS
WITH THE SAME EORROR MESSAGE
PING WORK FOR THE HOST IP NO PROBLEM.
Please see the following to Analyze the Problem:
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl status orcl
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:24
:50
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(C
ONNECT_DATA=(SERVICE_NAME=orcl)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
C:\oracle\product\10.2.0\db_1\BIN>path
PATH=C:\oracle\product\10.2.0\Db_1\bin;C:\oracle\product\10.2.0\Db_1\jre\1.4.2\b
in\client;C:\oracle\product\10.2.0\Db\jre\1.4.2\bin;;C:\oracle\product\10.2.0\db
\bin;C:\oracle\product\10.2.0\db\jlib;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\
System32\Wbem;"C:\Program Files\Zone Labs\ZoneAlarm\MailFrontier";C:\Program Fil
es\Common Files\Roxio Shared\DLLShared;D:\Program Files\Microsoft Visual Studio\
Common\Tools\WinNT;D:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin;D
:\Program Files\Microsoft Visual Studio\Common\Tools;D:\Program Files\Microsoft
Visual Studio\VC98\bin
C:\oracle\product\10.2.0\db_1\BIN>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 16 21:26:44 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: system
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> show user
USER is "SYSTEM"
SQL> select name from v$database;
NAME
ORCL
SQL>
IN THE PAST I WAS ABLE TO CONNECT TO ALL BUT NOW,
I'M UNABLE TO LOGIN TO APEX NEITHER EM DUE TO ORCL LISTNER.
Like I said before I have no problem connecting to SQL*PLS, BUT I can't Login to orcl APEX nor EM.
Any suggestion or solutions is really apreciated. I'm looking forward to hear from you ACES.......
Thank You Very Much,
MhndHi
Check this out.
TNS-12560: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification.
For further details, turn on tracing and reexecute the operation. Turn off tracing when the operation is complete.
TNS-00530: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: For further details, turn on tracing and reexecute the operation.
Proposed Solution on metalink.
Solution Description:
=====================
Delete the protocols in your "listener.ora" file that you do not use.
Edit the "listener.ora" file and look at the protocol section. Make sure that
only the protocols that you use on your system are there (i.e., TCP, IPC, ...)
and that there are no entries listed for SPX or NMP (named pipes).
Regards
Adnan
Since you are only using TCP I don't think that is the issue. You should turn on tracing to get more details.
Message was edited by: Adnan
amashhadi -
Unable to Start Listner for 10g R2 after windows xp pro restart. Please!
Database worked just fine until a system reboot after installing the Apache server and Apex 2.2 The service start and I'm able to connect to the database SQL*PLUS without specifying the host string
SQL*PLUS
User Name: xxxxx
Password : xxxxx
Host String: <Blank>
connect without any problem.
Once I include the orcl name I can't connect and get the following error message
TNS-12541: TNS: no listner
LSNRCTL> start
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL>
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
#Oracle Database 10g Enterprise Edition\
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listner.ora as following
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
I have another home for the Apache Server.
Everything was just fine, Oracle, Apache, EM, and Apex.
I checked the path for windows it looks good, checked the registery looks good, two homes listed.
When I check the status for the LISTNER is win Service it show start
OracleOraDb10g_home1TNSListener
I have another listner OracleOraDb10g_home1TNSListenerLISTNER1 I don't know why it's there?
TNSPING ORCL WORKS
WITH THE SAME EORROR MESSAGE
PING WORK FOR THE HOST IP NO PROBLEM.
Please see the following to Analyze the Problem:
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl status orcl
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:24
:50
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(C
ONNECT_DATA=(SERVICE_NAME=orcl)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
C:\oracle\product\10.2.0\db_1\BIN>path
PATH=C:\oracle\product\10.2.0\Db_1\bin;C:\oracle\product\10.2.0\Db_1\jre\1.4.2\b
in\client;C:\oracle\product\10.2.0\Db\jre\1.4.2\bin;;C:\oracle\product\10.2.0\db
\bin;C:\oracle\product\10.2.0\db\jlib;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\
System32\Wbem;"C:\Program Files\Zone Labs\ZoneAlarm\MailFrontier";C:\Program Fil
es\Common Files\Roxio Shared\DLLShared;D:\Program Files\Microsoft Visual Studio\
Common\Tools\WinNT;D:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin;D
:\Program Files\Microsoft Visual Studio\Common\Tools;D:\Program Files\Microsoft
Visual Studio\VC98\bin
C:\oracle\product\10.2.0\db_1\BIN>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 16 21:26:44 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: system
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> show user
USER is "SYSTEM"
SQL> select name from v$database;
NAME
ORCL
SQL>
IN THE PAST I WAS ABLE TO CONNECT TO ALL BUT NOW,
I'M UNABLE TO LOGIN TO APEX NEITHER EM DUE TO ORCL LISTNER.
Like I said before I have no problem connecting to SQL*PLS, BUT I can't Login to orcl APEX nor EM.
Any suggestion or solutions is really apreciated. I'm looking forward to hear from you ACES.......
Thank You Very Much,
MhndHi
Check this out.
TNS-12560: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification.
For further details, turn on tracing and reexecute the operation. Turn off tracing when the operation is complete.
TNS-00530: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: For further details, turn on tracing and reexecute the operation.
Proposed Solution on metalink.
Solution Description:
=====================
Delete the protocols in your "listener.ora" file that you do not use.
Edit the "listener.ora" file and look at the protocol section. Make sure that
only the protocols that you use on your system are there (i.e., TCP, IPC, ...)
and that there are no entries listed for SPX or NMP (named pipes).
Regards
Adnan
Since you are only using TCP I don't think that is the issue. You should turn on tracing to get more details.
Message was edited by: Adnan
amashhadi
Maybe you are looking for
-
HT201371 There is no longer a TouchID item on my 5s - why? How to get it back?
I used the TouchID then started to use only a code. Now after a while there no possibility to create a TouchID What to do?
-
Mail App Long References Header
I have problems replying to some messages in Mail App. It happens when there are a few recipients on the conversation and the references header has got quite large. When I view the raw source of the message in my inbox I can see that the references h
-
Why is it that if say a deriv is dealt with followed by another deriv the second is missed? why is the order of the term important for this code to work? public void removeIdenticalTerms(String [][] goldStandard, String [][] testModel, int numRows, i
-
when i sync my ringtone to my phone, it pop up a message" unknown error occurred -54", please help me!! thank you!!!
-
Hi, in attached file, I am trying to get up to 10 characters from the key board. Meaning that each time a key is pressed, I get it, up to a max of 10; and start again. Now the issue I am facing is that it is working ony when, after starting my vi (RU