Lit up screen draining battery after flash message

I am using 3GS model. After my last upgrade to 4.3.3 after recieving flash messages my phone's screen lights up again after few seconds, and remains like that. It responds only after pressing home button after that. so if it is at night (during sleep), it remains on throughout the night & it drains my battery. please tell the solution to correct this error.

Nothing obvious here, but better get rid of that remnant of CleanMyMac2. Also check if all software with kernel extensions, launch agents and launch daemons is still necessary and up to date (if not uninstall or update).

Similar Messages

  • So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

    So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone  shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
    Cannot receive any signal "searching" constantly.
    Turns off as soon as removed from usb ... wont stay on connected to laptop!
    HELP!

    The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
    Hardware can fail - it happens, which is why there is a one year warranty.

  • Home and lock screen draining battery 4s

    Home and lock screen draining battery 4s.  Also I can not turn the phone off, it keeps restarting itself.   I'm guessing these issue may be related.  The phone is set up as a new phone, no apps installed. 
    Usage and standby time are equal even though the phone isn't being used with "home and lock screen" taking up 90% battery power. 
    Can anyone help me with a solution?

    Try again to set it back to factory settings, using iTunes and again not using a backup afterwards. If this does not help, you'll have to get your phone checked by visiting an Authorized Apple Service Provider or by contacting Apple Support:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    iPhone - Contact Support - Apple Support

  • Nokia n8 draining battery after recent service pac...

    i use APP STOP application to quickly close all open backround apps.After latest map update in anna,i found maps are always open in backround when open APP STOP to close backround.
    Previously only menu was found open.I think its draining battery alot.
    APP STOP is free app on ovi,u can try that.
    Can someone help??
    Solved!
    Go to Solution.

    It not the service pack mate, it the new Map 3.08 that comes with the OTA update. Or even worse, apparently 3.08 is embedded with the V25 firemware for N8.
    You can read more of this problem here: /t5/Maps-Navigation-and-GPS/Nokia-maps-3-08-bug-app-runs-in-background/m-p/1235031
    The only work around and provide if you don't have a V25 firmware: /t5/Maps-Navigation-and-GPS/Maps-3-08-how-to-roll-back-to-3-06/m-p/1235065#M38325
    My Nok: Early Nokia brick -> 6110 -> 7110 -> 7250i -> 6131 -> 5800XM -> ? (701)
    Partner's Nok: 8250 -> 6170 -> 5800XM -> N8
    Along comes other Nok: Other earlier Nokia brick -> 8210 -> 6310 -> 5100 (rubbish) -> 6230 -> 5610XM -> 5233

  • Macbook Pro heating up and draining battery after yosemite upgrade.

    On Friday, I upgraded to Yosemite and I really like it. However my computer keeps heating up very quickly when doing simple tasks and the battery also drains. About 1% every 2 minutes when on Safari and having Pages open in the background. What can I do to slow down the battery drain. Before, on Mavericks I could get a whole day on Safari but now about half a day.
    This is the report that I got from EtreCheck.
    EtreCheck version: 2.0.6 (91)
    Report generated 22 October 2557 BE 10:58:23 am AEST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 2:20:32
    Disk Information: ℹ️
      APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      QACI HD (disk0s2) /  [Startup]: 419.25 GB (222.26 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 80.00 GB (56.65 GB free)
      HL-DT-ST DVDRW  GS31N 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
      /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.devguru.driver.SamsungComposite (1.4.18 - SDK 10.6) Support
      [not loaded] com.digidesign.fwfamily.driver (8.0.5f2) Support
      [loaded] com.digidesign.iokit.DigiDal (8.0.5f2) Support
      [loaded] com.digidesign.iokit.DigiIO (8.0.5f2) Support
      [not loaded] com.digidesign.mbox2.boot.driver (8.0.5f2) Support
      [not loaded] com.digidesign.mbox2.driver (8.0.5f2) Support
      [not loaded] com.digidesign.usb.elevenrack.driver (1.0.1) Support
      [not loaded] com.libusb.USB_Shield (6.0) Support
      [not loaded] com.paceap.kext.pacesupport.master (5.7.2) Support
      [not loaded] com.wacom.kext.pentablet (5.2.6) Support
      [not loaded] com.wacom.kext.wacomtablet (6.3.3) Support
      /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
      [not loaded] com.paceap.kext.pacesupport.leopard (5.7.2) Support
      [not loaded] com.paceap.kext.pacesupport.panther (5.7.2) Support
      [loaded] com.paceap.kext.pacesupport.snowleopard (5.7.2) Support
      [not loaded] com.paceap.kext.pacesupport.tiger (5.7.2) Support
      /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
      [not loaded] com.devguru.driver.SamsungACMControl (1.4.18 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungACMData (1.4.18 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungMTP (1.4.18 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungSerial (1.4.18 - SDK 10.6) Support
    Startup Items: ℹ️
      Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
      DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
      PACESupport: Path: /Library/StartupItems/PACESupport
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.wacom.pentablet.plist Support
      [running] com.wacom.wacomtablet.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [invalid?] com.adobe.SwitchBoard.plist Support
      [invalid?] com.bombich.ccc.plist Support
      [loaded] com.chasingsilver.dpprivilegedhelper.plist Support
      [running] com.digidesign.elevenrack.helper.plist Support
      [running] com.digidesign.fwfamily.helper.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [loaded] PACESupport.plist Support
    User Launch Agents: ℹ️
      [invalid?] com.adobe.ARM.[...].plist Support
      [loaded] com.google.keystone.agent.plist Support
      [invalid?] com.spotify.webhelper.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Wunderlist Application (/Applications/Wunderlist.app)
    Internet Plug-ins: ℹ️
      DirectorShockwave: Version: 11.6.6r636 Support
      WacomNetscape: Version: 1.1.1-1 Support
      Unity Web Player: Version: UnityPlayer version 4.3.7f1 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      SharePointBrowserPlugin: Version: 14.1.0 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Safari Extensions: ℹ️
      AdBlock
    Audio Plug-ins: ℹ️
      Digidesign CoreAudio: Version: 8.0.5 Support
    3rd Party Preference Panes: ℹ️
      Digidesign Eleven Rack  Support
      DigidesignMbox2  Support
      Digidesign Mbox 2 Pro  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      Perian  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Destinations:
      LaCie [Local]
      Total size: 1 TB
      Total number of backups: 45
      Oldest backup: 2013-11-17 01:31:45 +0000
      Last backup: 2014-10-21 11:52:49 +0000
      Size of backup disk: Excellent
      Backup size 1 TB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          6% WindowServer
          2% Safari
          2% hidd
          1% com.apple.WebKit.Networking
          1% BezelUIServer
    Top Processes by Memory: ℹ️
      185 MB Safari
      176 MB Pages
      132 MB mds_stores
      82 MB ocspd
      69 MB Wunderlist
    Virtual Memory Information: ℹ️
      193 MB Free RAM
      1.89 GB Active RAM
      1.32 GB Inactive RAM
      832 MB Wired RAM
      2.60 GB Page-ins
      70 MB Page-outs

    Nothing obvious here, but better get rid of that remnant of CleanMyMac2. Also check if all software with kernel extensions, launch agents and launch daemons is still necessary and up to date (if not uninstall or update).

  • Maps draining battery after closed

    Hello,
    I'm not too sure it's a z3 compact issue or a Google maps issue, but here's the problem:
    After using Google maps with location on, the app keeps draining a massive amount of the battery, even after turning off the location and closing the app. I've noticed when I go to settings-power management-battery usage-maps that the GPS time keeps running despite both location and app being closed. Location history and reporting are off under location settings.
    Only way out I've found so far is restarting the phone, which is not ideal.
    Anybody with same issue? Any fix?
    Thanks

    Hi Nosfe,
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    You could try uninstalling the latest update to the Maps application and then simply reinstalling, it could be due to bad install.
    Menu > Settings > Apps > Downloaded > Maps > Uninstall Update
    Let us know if this helps.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Hi my IPhone 5s  was turned off, the red and the blue screen appeared. After flashing  iTunes connectivity options into What should I do?

    Hi
    My iphone 5s was turned off.
    Showing red & blue on the screen.
    It show apple mark then i have to conect cable to the iTunes.

    Iphone is geting hot & battery is low

  • Maverick draining battery after upgrade MBP 2009

    I upgraded my MBP 2009 2.8 GHZ intel core 2 duo to Maverick, before upgrading the battery life was around 5-6 hours now the battery
    level drops quickly and I only get around 2 hours battery life.
    I have reset the SMC as per this web site and performed a permissions fix and verify disk (no issues) and have waited a week now for spotlight to do its thing
    but still the same issue.
    I have notice that the bottom on the notebook gets hot as if running an intensive app but no apps are using significant power.
    It is as if I have switch the graphics to high performance but the energy saver setting say better battery life.
    This issue may have started after I switched the graphics to high performance and after setting this back to better battery life I noticed that after logging out
    this setting reverted to graphics high performance.
    could the graphics still be in performance mode but indicating better battery life?

    Nothing obvious here, but better get rid of that remnant of CleanMyMac2. Also check if all software with kernel extensions, launch agents and launch daemons is still necessary and up to date (if not uninstall or update).

  • My battery drained. Screen shows battery with red line but doesn't seem to be recharding after 20 min.  Should I wait or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.

    My battery drained. Pluged in to wall but screen shows battery with red line but doesn't seem to be recharding after 20 min.  Should I wait longer or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.  Will a hard restart wipe all that out?

    Agree with Richard:
    -Your device needs both the CR and LF. To accomplish this:
    option 1: Concatenate the "end of line" string constant (this is a combination of CR and LF, located in the string pallete) to all your outgoing commands. Make sure in the "Visa configure serial port" the "Termination character enable" flag is false.
    option 2: Concatenate only a CR to your command's strings. Make sure in the "Visa configure serial port" the "Termination character enable" flag is TRUE AND that the termination character is set to 10 (meaning LF) which I think is the default.
    Details can be seen in this link:
    http://digital.ni.com/public.nsf/allkb/862567530005F09C862565BE005AB500
    "Adding Termination Characters to VISA Serial Writes in LabVIEW"
    Interesting would be to configure the serial port to accept not one but two termination characters. The above links refers to the document "Developer Zone Tutorial: Termination Characters in NI-VISA.", where this is supposed to be possible. The document however is 404'ed.
    If someone find a working link please post it.
    Regards

  • IPhone 4 battery still draining fast after ios 5.0.1 update

    5.0.1 update did not help, my battery still drains just as fast as it did on 5.0. My phone used to last 2 days no problem, now it lasts about 6 hours, I could go to bed at 5% and wake up with 3%, now if I got to bed with 25% it's dead by morning. I have all iCloud services turned off, only Maps turned on for location services, notifications for Phone, Messages, Reminders, Calendar, CNBC RT and Words Free. I have 2 email accounts, one is a pop3 and the other Exchange, both are set to pull every hour and preview is turned off. Is the issue with notifications? the only thing that has changed from 4 to 5 is I have notifications turned on and my reminders & tasks are synced with Exchange. I'm starting to think the issue is with notifications, I tried to turn off email notifications for the lock screen but they still show up.
    Are we getting another update after 5.0.1 soon for the continued battery drain issue?
    Email notifications continue to display for locked screen even though the option says Off, is there something else I'm missing?

    Do we really need another thread, with over 7,000 posts already on other threads?
    https://discussions.apple.com/thread/3391947?tstart=0
    https://discussions.apple.com/thread/3484755?tstart=0
    https://discussions.apple.com/thread/3481668?tstart=0
    https://discussions.apple.com/thread/3518760?tstart=0
    https://discussions.apple.com/thread/2755090?tstart=0
    https://discussions.apple.com/thread/3507356?tstart=30
    https://discussions.apple.com/thread/3482083?tstart=60
    https://discussions.apple.com/thread/3492588?tstart=60
    https://discussions.apple.com/thread/3397244?tstart=90
    Then there's the historical issue:
    Battery Meter/Life Problems with 4.0.2
    4.0.2 guzzling my battery. Your's too?
    4.0.1 battery life
    Battery runs out very quicky in iOS 4.0.1
    Battery nearly nonexistant after 4.0 upgrade
    Dead battery after few hours on standby using 4.0 software
    3.1.3 battery problem
    OS 3.1.3 battery issues
    3.1.3 upgrade - shortened battery life?
    Battery life cut after 3.1.3 update on iPhone 3G
    3.1.3 Firmware is a battery killer - how do I back out this upgrade?
    Poor battery life with iPhone 3G running 3.1.2
    3.1.2 EXTREME battery drain - what gives?
    3.1 Battery nightmare
    iPhone 3GS with fw 3.1 – battery life gets even worse
    Battery Issues with 3.0.1
    BATTERY drain with 3.0
    upgrade to 3.0 drains my battery
    Battery Drain after Update 2.2.1
    Battery Life Radically Decreased after 2.2.1 Firmware Update

  • How to permanently disable this message: "Press Esc to exit full screen." (by Adobe Flash Player) in Mac's Safari Browser?

    Hello everyone,
    I have been searching for sometime (without any success) for a solution to permanently remove this annoying message: "Press Esc to exit full screen."
    Whenever I go to full screen mode, watching any video on YouTube, BBC, CNN (or many other websites which use Adobe Flash Player for streaming video) I have to bare seeing this message for several seconds until it fades away. Seeing this message once or twice would have been okay, but as we all watch many videos on a daily basis on internet, after weeks, months and now years seeing this message over and over again many times every day, it becomes very annoying, and I find myself rewinding many videos to their beginning after this message fades away to be able to watch it from the beginning without anything obstructing it!
    Does anyone know how to "permanently" disable this message from appearing?
    I am using the latest version of Safari 6.0 on the latest version of OS X (Mountain Lion 10.8.1), and have the latest version of Adobe Flash Player (Plug-in version 11.4.402.265) installed on my new MacBook Pro 15" with Retina Display.
    Thanks,
    Ally
    Thursday, September 13th, 2012

    Thanks Carolyn,
    I am attaching a screenshot here for you to see that this setting was already set to what you suggested. I didn't need to change it as it was like this even before I post this message.
    So the problem still presists and unfortunately your suggestion is not a solution to this probelm.
    Last night I did more reseach and found a discussion in Adobe website, it seems a lot of other people have the same issue, and even started a discussion in Adobe website about it. But unfortunately Adobe refuses to address it and enable the end user at least to have an option to turn this message off from displaying permanently on his/her computer.
    I am writing down the url links for the two posts regarding this issue on Adobe's website:
    Link #1: http://forums.adobe.com/thread/921270
    Link #2: https://bugbase.adobe.com/index.cfm?event=bug&id=3058752
    Hopefully more people will get involved and ultimately we will either get Adobe's attention, or someone will find a "hack" and post it here for all of us. I have found some suggested "hacks" for Windows environment (you can simply google it, I am sure you will find them too). But so far I haven't seen anything for Mac's Safari browser.
    Cheers,
    Ally
    Thursday, September 13th, 2012

  • IPhone is at a grey screen after flashing for a few minutes

    My iPhone is at a grey screen after flashing at the same screen for a couple of minutes.
    I can turn my screen on and off, phone functions and siri both work. The screen is just grey, no error messages or anything.
    This happened after I was trying to connect to a wifi hotspot and I was typing something into a field when it froze, flashed for a few minutes, and stayed on a grey screen. This has been going on for about an hour and a half.
    Any help would be greatly appreciated.

    Hi Brialex119,
    If your iPhone is flashing with a grey screen, I would suggest resetting the device and resetting the network settings.  If that does not resolve the issue, then you may need to back up to iCloud and restore it.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/HT201559
    iOS: Wi-Fi settings grayed out or dim - Apple Support
    https://support.apple.com/en-us/HT204324
    Restart your iOS device.
    Make sure that airplane mode is off by tapping Settings > Airplane Mode.
    Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
    This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    https://support.apple.com/en-us/HT203977
    Regards,
    - Judy

  • IPod touch not responding and has white screen. Tried to restore, drain battery and re-charge etc but still nothing. What can I do?

    iPod touch not responding and has white screen. Tried to restore, drain battery and re-charge etc but still nothing. What can I do?

    Try what you have not tried so far. You may have tried all and the Apple store maybe in order.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Black Screen after flashing the latest BIOS

    Nothing but Black screen (fan, leds work) after flashing the latest bios...
    Is there anything I can do, or just new bios/motherboard can help? (I tried resting the battery, F8 key..) Thanks in advance

    I presume BIOS is screwed up. What you need is professional help with this so contact nearest service provider and ask for help.
    By the way: check this forum using advanced search option. In the past I saw several interesting threads about BIOS recovering. Im pretty sceptic about it but maybe you will be lucky and find solution.

  • "Get Variants" button disabled after error message in AT SELECTION SCREEN

    Hi,
    In "AT SELECTION SCREEN" I throw an error message if certain criteria return no data. 
    After the error message is thrown, the button for choosing variants no longer appears to work.  I click it and the variant selection box doesn't come up.  It just changes the values that have been populated from red to black. 
    What is the code that remedies this?  If an error is thrown, it should allow you to select a variant still. 
    Thanks,
    Kevin

    "AT SELECTION SCREEN" is not an option here.  Let me clarify.
    In START-OF-SELECTION, I call another program with a SUBMIT statement.  That program uses a logical database.  So it makes no sense to move this to "AT SELECTION SCREEN".  Even when I did that, I still couldn't solve this problem. 
    If the SUBMIT statement returns no data (if sy-subrc = '4') then I need to go back to the initial screen.  I need to display some kind of message, of type I or E or S, I don't care. 
    It just needs to go back to the selection screen and VARIANTS need to WORK, and you need to be able to SAVE the variants.
    For some reason, if I get no data with the SUBMIT statement, I can display a message and get back to the selection screen but variants do not work.  I've tried EXIT, STOP, CALL SELECTION SCREEN 1000 (the only one in the program), END LIST-PROCESSING, etc.  NOTHING WORKS!

Maybe you are looking for