Little horizontal lines at the left side of the page, printed on the HP Laserjet 4 plus?

Folks, It seems that when I print to my HP laserjet 4 plus, I see some tiny horizontal lines on the left side of the printed page, spaced 4-5 inches apart, all at the very furthest left side of the page.  Is this something that I can turn off?  Are they some sort of binding marks?  I am printing to this printer via jet direct card, over TCP/IP, from a Windows 7 64 bit PC.  I love this printer, and recently changed out the exit assembly rollers, and now works like it was new.  I also have a 500 sheet drawer and a duplexer installed on it, and I would like to figure out how to get rid of those little horizontal tick marks that show up on the left side of the page.  Any help or assistance is GREATLY appreciated,  Thanks so much in advance!

Hello  @MattDillon , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

  • Installed Firefox on Windows 7 but the menu and icons bar is full of little horizontal lines over the icons and menu bar..

    I installed Firefox 21 on a new Windows 7 OS. The menu bar and the icon bar at the top of the windows is full of little horizontal lines. Sometimes there are more lines and sometime less lines. It makes the icons and the menu items almost impossible to see. So far it's only the Firefox screen that does this. The other programs I installed so far doesn't do this.
    Any ideas?

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Horizontal lines on the screen.

    I just purchased a MacBook within the last 3 weeks. Every time l switch on my Mac l get coloured horizontal lines on the right hand side of the screen. When l switch if off and on again the lines disappear. Anyone else experiencing this problem. Do you think it’s a fault with the laptop? Any help would be appreciated.
    Thank you in advance.
    Louise t

    I would get it looked at. You may have a graphics circuit issue.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    iTunes: MacOSG Podcast
     An Apple User Group 

  • How to find end of the Page in Crystal ? or I need to add one Horizontal line at the end of the page.--- URGENT HELP NEEDED

    Hi friends,
    I need to add one horizontal line  for the detail section at the end of the page.
    I tried to put that line in page footer and i tried with Box also. Both are not properly working. Some space problem is coming.
    Is there any feature to find end of the Page.
    I want report format like this.
    set id  |  set name |  date  Name
      1         x           dddd   vijay
                            dddd   sarathi
                            dddd    reddy
    (End of the page)
    Thanks in advance...
    vijay.

    Do you know how many detail records are showing up per page?
    If you do - you could create a Details B section that is suppressed except for on Record N (where N is a counter, and N is the last Detail record that will show up on a page).
    The Page footer is indeed built so that it will be rendered at the bottom of your physical page of paper.

  • How to draw horizontal line at the end of table for multiple line items

    Dear Experts,
                       Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
    Thanks
    Ramesh Manoharan

    Hi
       I tried as per your logic but it is not solving my problem .  when i am gone to table painter it is showing line type 1 and line type 2
      is below format.. if u see here line type 1 bottom line and line type 2 top line both are same..  so how to avoid this ?
                              line type 1
                             line type 2

  • Help with a weird little blue line in the bottom right corner of my lightbox gallery?

    I get a weird little blue line in the bottom right corner of my lightbox gallery when viewing in Safari and Chrome.  Its not there when looking in Dreamweaver or Firefox.  I'm going crazy!  Can anyone help?

    I have added to following code to sample_lightbox_layout.css
    .lbGallery a {
                    text-decoration: none;
    That fixes the dash, which is an underline. The default style for a link is an underline and since it was not defined the tag gets the default style for the underline.
    Good luck.

  • Why do i have a grey thick horizontal line on the bottom of my screen imac

    hello
         I been having a problem with my iMac 21.5 inch mid 2011 since this monday January 7,2014. Theres a grey and some times black thick horizontal line at the bottom of the screen, I cant see my programs at the bottom of the screen. First its black then turns into grey and it starts flickering and then it stops flickering and it wont go unless I turn off my mac or put it to sleep, and then like an hour it comes back again. please could you help me Thank you.

    Hello Armando
    Check out the article below for troubleshooting your issue with the display. There are a few things that can be done, like changing the resolution of the display and also to reset the NVRAM to see if that resolves that for you.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Regards,
    -Norm G.

  • Need to print horizontal line at the end of main window in each page.

    Hi,
    I am printing a smartform with main window having 10 lines in footer. The problem I am facing is when the content extends upto two or more pages, I am not getting the horizontal line at the base of main window. For last page it is fine as it contains footer.
    Please suggest how to proceed.
    Thanks,
    RKU

    Hi,
    If you don't have any frame set on your main window:
    Go to output options and mark frames, and then go to details and uncheck checkboxes for above, laft and right, leving only below marked.
    This will give you a line in the bottom of you main window.
    If you dont' want to do this on the main window, can you create a new window placed at the bottom of the page and use this framing technic on that window. But in that case don't forget to mark the "always draw box and shading" checkbox. as this window contains no values, the will not get printed unless  you mark this checkbox.
    Regards
    Åsa Thenstedt

  • Horizontal line across the monitor. It happened yesterday.

    I have a HP ENVY 23-c1 10xt AiO (Lavaca3-SB)PCUS and there is a horizontal line across the monitor.  It happened yesterday.

    Hello again javajohn23,
    I would like you to try the following steps:
    Step 1. Turn off the computer, and then remove the power cord
    Step 2. With the power cord disconnected, press and hold the power button for five seconds
    Step 3. Reconnect the power cord, and then turn on the computer
    If the above steps do not resolve it try the next set up steps:
    Step 1. Restart your computer
    Step 2. Repeatedly press the F10 key about once every second for five seconds after turning the computer on
    Step 3. Wait five seconds
    Step 4. Press the F5 key. This restores the default settings of the BIOS
    Step 5. Press the Enter key. This accepts the changes
    Step 6. Press the F10 key. This opens the Save and Exit window
    Step 7. Press the Enter key. This saves the changes, exits the BIOS, and then the computer restarts
    Step 8. Restart the computer.
    Another thing I can think to try is review the HP Support document: Changing Display Settings, Background Image, Icons, and Screen Saver (Windows 7) to see if you can identify anything out of place.
    We can also try to reload the Intel Graphics Driver for your computer as it will wipe out the settings when the new driver  is reinstalled.
    Please re-post with the results of these steps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • My Classic developes two thin horizontal lines across the top third of the screen.

    After a day using my classic in the car, I plugged it into its speaked dock and niticed two thin horizontal lines all the way across the top third of the screen.
    Does anyone know how to get rid of them pleaase. Thx

    You can try Resetting the iPod, won't work, if LCD screen is damaged or the display chip surface mounts has gone wobbly, which mean going in for servicing.
    Otherwise.
    Press Menu and Center button for 10 secs till the Apple logo comes on, then release the buttons.

  • I have a whole history serch panel on the left side of my page, and I don't want it, and can't get rid of it!

    I got this history search panel on the left side of my pages on Mozilla Firefox after downloading the latest updates today. I can't click on it, drag it, or otherwise get it to do anything.....Help!

    You can toggle the History side panel off/on with "Ctrl+H"
    The History sidebar work for me if you change the View in the side panel to "By Last Visited".
    The sidebars can be accessed or removed through the View (menu) > Toolbars, by clicking on a sidebar to use/replace/drop only one toolbar can be shown at time.
    If you don't see the view menu, use the "Alt" key (or "F10")
    You can make '''Firefox 6.0.2''' look like Firefox 3.6.21, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • My IP7250 is suddenly printing a bright horizontal line at the start of the page and a dark horizont

    My IP7250 is suddenly printing a bright horizontal line at the start of the page and a dark horizontal line at the end.
    Every time the lines are printing in the exact same place.
    it happens mostly when prining involves blue colors.
    the line are approx. 1 cm wide.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • When doing the app exposé gesture, is it normal to see a thin white horizontal line at the bottom of the screen after minimizing a window?

    I noticed that when I open two windoes (say Safari and Trash can) and minimize both windows so they go on the dock, when I do the swip down gesture with 3 fingers (App Expose´) there is a thin white horizontal line at the bottom of the screen. Does it happen to every macbook pro out there?  Is this normal?  Hope it's not a display screen problem...

    You would have to have multiple pages of the app minimized.
    This is what it looks like with Safari with 1 page open and 4 minimized.

  • HT201177 I have a horizontal line in the bottom 1/3 of my screen display that I can't get rid of

    I can't seem to get rid of this black horizontal line in the bottom 1/3 of my display its there in all applications and there appears to be a shadow bar behind it? any help would be appreciated

    What model iMac? This forum covers three different variants made before 2006. They have different display technologies.
    Doing "About this Mac" from your Apple menu and posting the info found there for your processor type is a good start. If that shows you have an Intel processor, those iMacs are different enough to have a separate forum here:
    iMac (Intel)

  • Pictures taken with my 1D Mark IV show a blue horizontal line at the bottom from ISO 400 onwards.

    Pictures taken with my 1D Mark IV show a blue horizontal line at the bottom from ISO 400 onwards. So far nobody has been able tot tell me the cause of this problem. The body is still quite new (15000 pics taken).

    I agree that it looks like a column of photosites is not working.  But... I'm curious as to why this would only happen at ISO 400 or above. 
    The sensor is covered with photosites -- they are monochrome.   On top of the photosites is the "bayer mask".  The mask is a checkboard pattern of red, green, and blue "lenses" which makes the photosite beneath only sensitive to that particular color.  They are group in clusters of 4 photosites in a 2x2 matrix.  Two of the four squares (in opposing corners) are green.  One corner is red.  One corner is blue.  If you were to lose a column which happens to be along the red/green column (as opposed to the green/blue) then you'd lose red sensitive and half the green sensitivity in that column.  The result would be that this column is flanked by two "working" columns which are full of green/blue photosites... hence the teal blue look.
    I do not know if this will work for you, but oddly... you can actually sometimes "clear" stuck pixels (but usually this is an indvidiual stuck pixel... not a whole column of them) by putting the camera into manual sensor cleaning mode (and you may have to do this 2 or three times).  While the normal point of the self-cleaning mode is to flip up the reflex mirror and open the shutter so that you can inspect and clean the sensor (really the front-most filter because you can't actually touch the real sensor), it also neutralizes the charge on the sensor (or so I've read).  This charging and discharging of the sensor a few times can often get "stuck" pixels to start working again.  BUT AGAIN... I've only ever seen this used on individual stuck pixels... never a whole row.
    Tim Campbell
    5D II, 5D III, 60Da

Maybe you are looking for