Little phone icon with two in front of the phone icon a 1 behind the phone.

The screen on my phone has this and I want to know what it means and how to get rid of it.

i think this is okay, +1 is just the country code, and almost all of my numbers have it too. it shouldnt affect your ability to text. something else might be going on.

Similar Messages

How do I sync two ipods with two different IDs on the same computer?

How do I sync two ipods with two different IDs on the same computer?

Simply connect them. One computer with one iTunes can manage multiple devices. They're tracked by S/N but you might wish to assign them unique names so that you can track them yourself.
The only minor issue is app updating and purchases while on the computer. It's necessary to log out and back in to the "correct" ID. Much easier to do these things from the iPods.

How to sync with two computers not at the same time, I'm registerd with one computer

How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?

Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. 
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

Works with two component iu in the same PDA

HI:
I have two componentes IU in Mobile 7.1 patch07 for handhelds.
I need to access a view from one componente iu to another view of another componente iu.
Can I work with two componet iiu n the same PDA and have communication from one to another?
Best Regards.
Maria Elena

HI:
There any way to configure the main menu of SAP Mobile 7.1 where you have applications that are deployed in the PDA?
De esta manera podría crear más de un componente dentro de una aplicación y poder tener más de un link en el menu principal
Best regards
Maria Elena

In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??

In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??

Hi,
I don't know of a preference, but have you used ⌘-T in iCal?
Best wishes
John M

Collecting data from advantech-usb4704 with two different apps at the same time

I wonder if I can access to Advantech-4704 with two different applications at the same time?
I use this block in my vis.
I have enough ports, but inputs are needed in completely different applications. Do I have to close one of them or can they run simultaneously?
Thankyou!

Dear gtu,
as nathand said, usually it is not supported to access the same physical resource simultaneously from multiple programs. In case of DAQmx for instance, you will get an error message which says that the resource is already reserved. I suppose the same would happen with your driver, however it might be worth a try.
One workaround could be however if you revise your applications and merge the codes if it is possible so that no concurent resource allocation takes place.
Best Regards,
Adam Cseh
Applications/Systems Engineer
National Instruments

HT204370 My movies' audio isnt 5.1 as the description says. when I check out their info it says they are 2 channel. I have tried with two movies already and the audio description said Dolby 5.1

My movies' audio isnt 5.1 as the description says. when I check out their info it says they are 2 channel. I have tried with two movies already and the audio description said Dolby 5.1

Actually, try this instead. On the apple tv, under settings > Audio > Dolby digital
Change it From AUTO (default) to ON
That worked for me. All my eyetv encodes have stereo and 5.1 tracks. For some reason the auto option forces stereo. Setting it to ON forces the 5.1.
Everything sounds nice again! It's just stupid that apple puts AUTO for the default and that setting results in stereo not 5.1.

Is it possible that Exchange UM could be configure with two call managers over the same sip?

Hi,
I have Cisco call manager 8.2 integrated with Microsoft Exchange Server 2010 Unified Messaging.
Call manager has primary and secondary server. I created a sip trunk and linked primary CUCM with Exchange. Users can leave and get voice mails.
Problem: In case that primary server is down (WAN is down) the users registered on secondary server but they cannot contact to Exchange Unified Messaging.
I added new UM Dial Plan with the same pilot and associated it to the secondary CUCM server. UM answered but do not recognize the extension number "is not a valid mailbox extension".
Is it possible that Exchange UM could be configure with two call managers over the same sip, the same pilot number, different associated UM servers and get access to the same voice mail boxes?
If not:
Does exist a way to configure Exchange UM that will work if one CUCM server is down?
Thank you,
Peter

Hi,
I have Cisco call manager 8.2 integrated with Microsoft Exchange Server 2010 Unified Messaging.
Call manager has primary and secondary server. I created a sip trunk and linked primary CUCM with Exchange. Users can leave and get voice mails.
Problem: In case that primary server is down (WAN is down) the users registered on secondary server but they cannot contact to Exchange Unified Messaging.
I added new UM Dial Plan with the same pilot and associated it to the secondary CUCM server. UM answered but do not recognize the extension number "is not a valid mailbox extension".
Is it possible that Exchange UM could be configure with two call managers over the same sip, the same pilot number, different associated UM servers and get access to the same voice mail boxes?
If not:
Does exist a way to configure Exchange UM that will work if one CUCM server is down?
Thank you,
Peter

Cannot work with two Swing app. at the same time.

Hi guys,
I bring this problem here may somebody experienced that.
I developed two client side applications(applets). Locate them on Apache/Tomcat. There is also a Index.html file with two links, so when user clicks on each link the associated application will downloaded on his/her PC and ready to work. (In index.html I used JavaScript function window.open(?) to load the applications)
Now please see this scenario:
1-I ran/loaded both application in two separate browsers(IE5.5). And tried to work with them(minimized one and work with another). Soon I faced unexpected frizzing/locking or very slow running on both applications.
2-Then closed/killed one of them(killed IE). Then re-executed same application again. The application loaded with the last activated screen . Seems it never killed and it was still alive.
3- The only way to successfully working is one by one. Means execute & work with one, then kill that, and then execute and work with another.
To Debug:
When both applications were running(each on it?s own IE), I opened the Task Manager and saw there was only one IEXPLORER.EXE was running, also there was only one Java VM (a little bird icon) on right-bottom of the screen.
I believe this causes the problem. Seems they both running in the same session. Since I opened two applications in two IE I was expected to see two IEXPLORER.EXE with two JVM. Am I right? Do you think so?
Note that the two app. have no Communication with each other.
Any way, Now I am seeking to find the solution. My primary mind says probably I should not use window.open(..) in index.html to load the applications.
Would appreciate any command on this.

I am also facing the same problem !
Since this may be a very late reply , if any body has a solution pls share!
What I understand is that when we use javascript:window.open() it opens a new browser window
but under same JVM. This is helpful if we need to have a 'Close window' button/link in the newly opened window and use javascript:window.close() there. Then browser will not show us the confirmation dialog box 'Webpage you are viewing is trying to close the window. Do you wish to Proceed?'
But if we want a new JVM for each opened link and also donot want the popup dialog to be displayed when we close the browser from there..what do we do??

I have a split screen with two site. All the suggestions are not working.

Everytime I load Firefox, I get a split screen with two sites on it.
I have tried the resetting of home page and clicking off the icon to not show the site selection page.
I have facebook on the left and it cannot be expanded bigger than a panel. I have a 3/4 screen of what ever web site I wanted to load.
How do I turn this off?
Nothing is working and I cannot imagine how it happened.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Opening in the sidebar is the default for bookmarks that are created via a link or button on a website. 
You can check the Properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Cmd+B on Mac). 
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right. 
Make sure that "Load this bookmark in the sidebar" is not selected.

Can you setup handoff to work with two mac computers on the same network?

I am attempting to setup handoff to work with two computers on the same network. I cannot seem to get it to work. Should I be able to?

I'm not sure but I haven't seen anything on the Apple site that indicates that it would not work. The following troubleshooting documents may help: Get help using Continuity with iOS 8 and OS X Yosemite - Apple Support
Note in particular the Mac models supported. The other thing that occurs to me is that in addition to being on the same network they would have to be within Bluetooth range of each other.

Hi! when starting my computer the background went gray with two hard drives in the middle. One is named macintosh HD and the other recovery 10.9. I have my whole life on my computer, and i don't know which of them i should start up? Please i need help!

Hey!
when starting my computer the screen is gray with two harddrives. One is named Macintosh HD and the other Recovery 10.9. My computer has never done this before! I am really worrid that my files will be lost if i choose to start the wrong harddrive. Which one should i choose? HELP!!

You probably held down the Option or Command R keys when you heard the startup tone. Simply choose the HD. To learn what the Recovery partition is please read OS X: About OS X Recovery

Why can't I swipe with two fingers to show the previous page like in Safari

When I want to go to the previous page I can't do so by swiping two fingers to the right like I can in Safari with the new Lion operating system. I would like to set firefox to have this feature since it is very helpful in my work.

I could not see this as well when I tried to post a link . It just shows the preview of the page. Facebook did not have this feature either.

How can I create a document with two columns in which the text in the left hand column flows to the left column on page 2,3 etc, and doesn't interfere with the text I want to place in the right? Pages 5.

I'm using pages 5 and want to comment in a right hand column, on a (latin) text which I wish to place in a left hand column.
Ideally I'd like to be able to copy and paste the latin text and see it flow over into the left hand column on multiple pages.
At the moment it is impossible for me to keep the text only in the left hand column Any help!?
B

Columns do what columns do, flow from the bottom of the left hand column to the top of the right hand next column. So won't do what you want.
Your tag says you are using OS X 10.5.8 but you say you are using Pages 5 so one or the other is not correct.
If you migrated up to Pages 5 what did you do with your previous Pages '08 or '09?
Because Pages 5 is missing over 100 features, one of which is Textbox linking, that would allow to flow down through a series of Textboxes set up like columns.
What you can do is run the Latin text down a narrow document to the left and add individual Textboxes to the right and put your English translations in those. The Latin will flow but the English will not.
Peter

Filtering a range with two conditions and totalling the filtered set

I have got to :
=SUMIF(LOOKUP(1, 1::K2:K79, 1::L2:L79), "=✓", 1::I2:I79)
The error message is "SUMIF requires that all range arguments are the same size".
My understanding is that :
LOOKUP(1, 1::K2:k79, 1::L2:l79) will return a set of values filtered from L2:L79 in table 1 that correspond with all rows in K2:K79 (in the same table) that contain the numerical value 1.
That set of values is then used as the first argument in a SUMIF statement to be filtered on "=✓" producing a subset whose corresponding rows in I2:I79 will be totalled.
I've given it a good bit of effort now for a couple of hours and hope that someone can help me out of my amateur quandary with a formula that will achieve the same thing, because I am giving up : ie :
Product
Month
Eligible product (✓) or not (x)
Cost
Teddy Bear
1
x
£35.00
High-resolution PC Monitor
1
✓
£600.00
Electric Fan
1
✓
£45.00
Newspaper subscriptions
1
x
£45.00
Snack foods
1
x
£15.00
Telephone line installation
1
✓
£80.00
Office chair
2
✓
£75.00
I need to efficiently calculate the total cost of "Eligible products" bought in Month 1.

Hi b,
LOOKUP returns a single value corresponding to the first match it finds for the search value.
As I understand it, you wnt the SUM of all 'cost' values where the month is "1" AND 'eligible' is checked.
For a SUM depending on more than one condition being TRUE, the function of choice is SUMIFS.
If Row 1 is a Header row, and Row 179 is the last row in your table (or if no rows below that will match both conditions), you can omit the row part of each range address.
I'm confused as to which column contains the amounts to be summed, so I've made these assumptions:
K = month
L = eligible
M = cost
O2: =SUMIFS(M,K,"=1",L,"=√")
(The formula may go in any cell not referenced by the formula. My choice to place it in O2 was arbitrary.)
Regards,
Barry
PS: Apple has provided an excellent guide to writing formulas in Numbers. The iWork Formulas and Functions User Guide is available for download via the Help menu in Numbers. It provides a description of each function with at least one example of how it may be used.
B

Little phone icon with two in front of the phone icon a 1 behind the phone.

Similar Messages

Maybe you are looking for