Little problem

I just purchased Adobe Photoshop Elements 8. I was having a real problem trying to install it only to find out I purchased the MacOS version and I am running Win7 64 bit. I know real bone head mistake but my eyes aint what they used to be and in my excitement failed to read the box. What do you think is my best course of action at this point? Any suggestions are appreciated.

3000 N200 (type 0687) and Lenovo N200 (type 0769) Try the Vista drivers, They have worked for other users.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Similar Messages

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

Hii i m frm BGD. I m using iphone 5. My carrier BGD ROBI AXIATA. When it was ios 6 it works better . But i recently upgrade to ios 7 and i facing the little problem. One of the ussd call. Plz help or suggest ir doing better about itz as soon as possible.

I'm not trying to minimize your issues, but I have an iPhone 5S and find that I have not had these types of problems on AT&T. I'm wonding if something has gotten stuck in a loop that is continually trying to use data. If you make a good backup of your phone, try restoring it as new, and do not add anything to the phone right away. Let the device run like this for a little while and see what kind of usage you have. You report you phone is showing usage of 21GB. Did you rese this setting on the phone to begin at your billing period? The reason I ask this is some people believe this setting resets on its own with your billing period, it does not. This has to be manually reset by the user, so it might not be that accurate depending on the last time that you reset it.
If the phone seems to not use so much extra data during the period the device does not have extra apps on it, then try restoring from your backup and see what happens. If this increases your data usage quite fast again, then there is probably something corrupt in the backup that is causing this issue.

Little problem with Photoshop ....

Hi. I have a little problem with photoshop CS 4. I use a color replacement tool to change a color in some details... but when i set new color, on pictures entries only or grey or black colors and nothing other... i dont known why.... please help . Thanks. Sorry for bad english

Usually the Color mode is the one you want for the color replacement tool, you
might have it set to luminosity or your trying replace black or white colors.
MTSTUNER

Little problem with Strings.

          I have an little problem with Strings, i make one comparision like this.
          String nombre="Javier";
          if( nombre.equalsIgnoreCase(output.getStringValue("CN_NOMBRESf",null)) )
          Wich output.getStringValue("CN_NOMBRESf",null) is "Javier" too, because I display
          this before and are equals.
          What I do wrong?.


You are actually making your users key in things like
"\026"? Not very user-friendly, I would say. But
assuming that is the best way for you to get your
input, or if it's just you doing the input, the way to
change that 4-character string into the single
character that Java represents by '\026', you would
use a bit of code like this:char encoded =
(char)Integer.parseInt(substring(inputString, 1),
16);
DrClap has the right idea, except '\026' is octal, not hex. So change the radix from 16 to 8. Unicode is usually represented like '\u002A'. So it looks like you want:String s = "\\077";
System.out.println((char)Integer.parseInt(s.substring(1), 8));Now all you have to do is parse through the String and replace them, which I think shouldn't be too hard for you now :)

Little problem ALV - Download to Excel

Hi Friends !
I have a little problem, when the user download the data which are in ALV, the positions of columns change .
Example:
In ALV.
1 - Column A
2 - Column B
3 - Column C
In Excel
1 - Column B
2 - Column A
3 - Column C
Regards !!!

This sounds pretty weird. Are they just running ALV and then they do a download on the ALV screen using the Excel icon? Are they running it with some type of Excel template? Is it using a special layout - if so are they sure they saved the layout before they download? Never heard of or saw this one before. Also are you the Cesar I worked with a few years ago in Memphis? Just wondering - don't think this will help much but let me know.

I have a little problem with iphoto

Hi, i have a little problem when i used my iphoto.
First, i'm so sorry because my english is not fluent, but i hope that you understand me.
The problem is that, i can't see the photos when they are vertical, i mean, when i change my photos horizontal view to vertical view, i can't see the vertical photos.
Can you help me??? i dont understand what is the problem.
Thanks so much.
Lorena from Colombia

Try rebuild the library:
Hold down the apple and option (or alt) keys and launch iPhoto. Use the resulting dialogue to rebuild.
Regards
TD

Nds Insert statement little problem

DB version XE 10g
Hello
I have little problem with my insert statement.
In my code, are many examples, but plz focus on V2 and V3 part.
As you can see V2 and V3 are not working
I get following errors
V2
Error report:
ORA-00984: column not allowed here
ORA-06512: AT line 28
00984. 00000 - "column not allowed here"
V3
Error report:
ORA-00917: missing comma
ORA-06512: AT line 33
00917. 00000 - "missing comma"
I really have no idea, why i'm getting these errors...
DROP TABLE FILMYARNOLD;
CREATE TABLE FILMYARNOLD
    FIL_ID VARCHAR2 (329),
    FIL_NAME VARCHAR2 (592),
    FIL_YEAR VARCHAR2 (294),
    FIL_ACTOR VARCHAR2 (392),
    FIL_TEXTT VARCHAR2 (2596)
SET SERVEROUTPUT ON
DECLARE
TYPE FIL_TABLE IS TABLE OF VARCHAR2 (256);
vfilmiczki FIL_TABLE := fil_table();
statement VARCHAR2 (2048);
BEGIN
vfilmiczki.EXTEND;
vfilmiczki(1) := '77804';
vfilmiczki.EXTEND;
vfilmiczki(2) := 'Predator';
vfilmiczki.EXTEND;
vfilmiczki(3) := '1984';
vfilmiczki.EXTEND;
vfilmiczki(4) := 'Arnold';
vfilmiczki.EXTEND;
vfilmiczki(5) := 'get to the choppa';
/*statement := 'INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME, FIL_YEAR, FIL_ACTOR, FIL_TEXTT) VALUES ( ';
statement := statement|| '''chlip'',''lol'',''lol'',''chlip''';--
statement := statement||',''hmm'')';*/
-------V1------------working-----------------
--statement := 'INSERT INTO FILMYARNOLD (FIL_ID) VALUES ( ';
--statement := statement||vfilmiczki(1)||' )';
--EXECUTE IMMEDIATE statement;
--------V2-------------------- not working -----------------------------------------
--statement := 'INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME) VALUES ( ';
--statement := statement||vfilmiczki(1)||','||vfilmiczki(2)||' )';
--EXECUTE IMMEDIATE statement;
----V3------------ not working ------------
statement := 'INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME, FIL_YEAR, FIL_ACTOR, FIL_TEXTT) VALUES ( ';
statement := statement||vfilmiczki(1)||','||vfilmiczki(2)||','||vfilmiczki(3)||','||vfilmiczki(4)||','||vfilmiczki(5)||' )';
EXECUTE IMMEDIATE statement;
/* statement := 'INSERT INTO FILMYARNOLD VALUES (:jeden, :dwa, :trzy, :cztery, :piec)';
EXECUTE IMMEDIATE statement
USING vfilmiczki(1)
,     vfilmiczki(2)
,     vfilmiczki(3)
,     vfilmiczki(4)
,     vfilmiczki(5); */
statement := 'INSERT INTO FILMYARNOLD VALUES ('; --(:jeden, :dwa, :trzy, :cztery, :piec)';
    FOR i IN 1..vfilmiczki.COUNT
    LOOP
        IF i = vfilmiczki.LAST THEN
            statement := statement||vfilmiczki(i)||' )';
        ELSE
        statement := statement||vfilmiczki(i)||', ';
      END IF;
        --DBMS_OUTPUT.PUT_LINE (vfilmiczki(i));
    END LOOP;
    EXECUTE IMMEDIATE statement;
    --INSERT INTO FILMYARNOLD
    --VALUES (vfilmiczki(vfilmiczki.FIRST),vfilmiczki(2),vfilmiczki(3),
            --vfilmiczki(4), vfilmiczki(5));
    --DBMS_OUTPUT.PUT_LINE ('*****************');
    --DBMS_OUTPUT.PUT_LINE (vfilmiczki((vfilmiczki.LAST)));
END;
/Im waiting for your replys
greetings

Hi,
change V2 to:
STATEMENT := 'INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME) VALUES ( ';
STATEMENT := STATEMENT||VFILMICZKI(1)||','''||VFILMICZKI(2)||''' )';
EXECUTE IMMEDIATE statement;and V3 to:
----V3------------ not working ------------
STATEMENT := 'INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME, FIL_YEAR, FIL_ACTOR, FIL_TEXTT) VALUES ( ';
STATEMENT := STATEMENT||VFILMICZKI(1)||','''||VFILMICZKI(2)||''','||VFILMICZKI(3)
             ||','''||VFILMICZKI(4)||''','''||VFILMICZKI(5)||''' )';
EXECUTE IMMEDIATE statement;EXECUTE IMMEDIATE statement;One general remark: INSERT can be used directly in PL/SQL, you don't need to bother with dynamic SQL,
and the direct SQL will be probably more efficient than dynamic SQL.
Try this:
SET SERVEROUTPUT ON
DECLARE
TYPE FIL_TABLE IS TABLE OF VARCHAR2 (256);
vfilmiczki FIL_TABLE := fil_table();
statement VARCHAR2 (2048);
BEGIN
vfilmiczki.EXTEND;
vfilmiczki(1) := '77804';
vfilmiczki.EXTEND;
vfilmiczki(2) := 'Predator';
vfilmiczki.EXTEND;
vfilmiczki(3) := '1984';
vfilmiczki.EXTEND;
vfilmiczki(4) := 'Arnold';
vfilmiczki.EXTEND;
vfilmiczki(5) := 'get to the choppa';
-------V1------------working-----------------
INSERT INTO FILMYARNOLD (FIL_ID) VALUES ( VFILMICZKI(1) );
--------V2-------------------- not working -----------------------------------------
INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME) VALUES ( VFILMICZKI(1),VFILMICZKI(2));
----V3------------ not working ------------
INSERT INTO FILMYARNOLD (FIL_ID, FIL_NAME, FIL_YEAR, FIL_ACTOR, FIL_TEXTT)
VALUES ( VFILMICZKI(1), VFILMICZKI(2), VFILMICZKI(3), VFILMICZKI(4), VFILMICZKI(5));
END;
/

MOVED: [Athlon64] Annoying little problem! PLease help

This topic has been moved to Operating Systems.
[Athlon64] Annoying little problem! PLease help

Hi Ben.
Thank you very much vor your replay
but I still can get it
Here the code
on testAlphaChannels sourceImage, cNewWidth, cNewHeight,
pRects
cSourceAlphaImage=sourceImage.extractAlpha()
newImage = image(cNewWidth, cNewHeight, 32)
newImage.useAlpha = FALSE
newAlphaImage = image(cNewWidth, cNewHeight, 8)
repeat with i=1 to pRects.count
destRect=......
newImage.copyPixels(sourceImage, destRect, pRects
newAlphaImage.copyPixels(cSourceAlphaImage, destRect,
pRects,
[#ink:#darkest])
end repeat
newImage.useAlpha = TRUE
newImage.setAlpha(newAlphaImage)
textMember = new(#bitmap)
textMember.image=newImage
end
But the result is not correct. O my example
http://www.lvivmedia.com/fontPr/Fontproblems3.jpg
image to the left is
created on background image, and image to the right - with
code above
What is wrong in the code, I quoted above?
Any help will be appreciated
Jorg
"duckets" <[email protected]> wrote in
message
news:ekhekq$c6g$[email protected]..
> I think this is what you'll have to do:
>
>
>
> Do the copypixels command as per your 2nd result example
(where "no
background
> image is used") using destImage.useAlpha = false.
>
> Create a new image as a blank alpha channel image (8
bit, #greyscale)
>
> Repeat the same copypixels commands for each number, but
this time the
source
> image is 'sourceAlphaImage', and the dest Image is this
new alpha image.
And
> the crucial part, use: [#ink:#darkest] for these
operations. This is
because
> you are merging greyscale images which represent the
alpha channels of
each
> letter. The darker parts are more opaque, and the
lighter parts are more
> transparent, so you always want to keep the darkest
pixels with each
copypixels
> command.
>
> hope this helps!
>
> - Ben
>
>
>
>

Little problems at start

I own a zen micro 5gB 3 months, and was satisfied of it, but now it begins to...disapoint me a little...Sometimes it just froze on startup screen, or when the "zen micro" logo was displayed, so the only thing to do was to remove the battery then reboot...Until one day, when this funny message appeared : "Hardware problem" ..... I sent the player back to support, and got another one, 2 weeks ago... But it still freeze sometimes! Not EVERYtimes, but VERY often...When i try a remove battery/reboot, it displays "rebuilding library" and sometimes freeze after completing, and again and again even after removing the battery... It did it several times since i've acquired the player... The only thing to do then is a clean up through recovery mode... Despite that, when it's on, i don't have any problems playing music...
-Is it due to the few left disk space? I splitted the disk: 3GB for the library, 2 for datas, and filled up the library (only mB left)
-The version of the firmware is ..0, i think it's the last one?
I think that's all, please tell me if you need additional informations...
Thanks a lot
PS: Yes admins, i've searched the faqs and other helps, but they always say the same thing: Remove the battery then reboot...Message Edited by AmShagar on 2-02-2005 02:29 AM

I had this problem for weeks despite reloading firmware, formatting player etc the answer to your little problem is to hit pause before turning the player off. If the cd/tracks you were listening to have finished you can just turn your player off.
I had problems of zen logo splitting in half, re-building library problems, fuzz, buzz and squeal noise etc. I have not had these problems since pausing the track before turning the player off.
Cheers
PS. SSR - None of my files are from P2P sites.
Message Edited by fizz on 2-03-2005 :4 PM

3D product rotation images sequence little problem

Hi!
I made a sequence of images and make the code the rotate around it but I have a little problem with the loop ( from frame 100 to 1 || 1 to 100 ).
You can take a look to the link here : http://sebastienouellette.com/productview/test.html
How can I avoid the little stick problem. I know what's the problem but I dont know how to solve it. It's with the frame tweening. Anyway, here's the code :
import flash.events.Event;
import com.greensock.*;
import com.greensock.easing.*;
import flash.events.MouseEvent;
var direct:String = "forward";
var objTotFrames:int = 490;
var ease:int = 5;
var targX:int = mouseX;
var drag:Boolean = false;
var ptX:int = 1;
var frame:int = 1;
var mousePos:int;
stage.addEventListener(Event.ENTER_FRAME, dragHandler, false, 0, true);
stage.addEventListener(MouseEvent.MOUSE_DOWN, downHandler, false, 0, true)
stage.addEventListener(MouseEvent.MOUSE_UP, upHandler, false, 0, true)
function dragHandler(e:Event):void
mousePos = -mouseX * 100 / objTotFrames;
if ( frame < 1 ) {
loopForward();
}else
if ( frame > 101 ) {
loopBackward();
}else
if (drag)
        initAnim();
function initAnim():void {
targX = mousePos+ptX;
frame += (targX-frame);
TweenMax.to(mc, .3, {frame:frame});
//mc.gotoAndStop(frame);
function loopForward():void {
//TweenMax.killTweensOf(mc);
frame = 101;
ptX = frame - mousePos;
mc.gotoAndStop(101);
trace("off 1");
function loopBackward():void {
//TweenMax.killTweensOf(mc);
frame = 1;
ptX = frame - mousePos;
mc.gotoAndStop(1);
trace("over 1");
trace(frame);
function upHandler(event:MouseEvent):void
    drag = false;
function downHandler(e:MouseEvent):void
      ptX = frame - mousePos;
      drag = true;
Thanks for your help!

It doesnt work but I think think this is the problem because if you take a look to this example :
http://sebastienouellette.com/productview/test2.html
It works pretty well without the "easing" effect and the only think I change in the code is that I removed the line : TweenMax.to(mc, .3, {frame:frame}); and change it to a basic mc.gotoAndStop(frame);

Urgent Little Problem with JApplet

Hi, i have a little problem, i have an applet that loads on a webpage
it contains two textFields and a command button , i want when i click
on the button i should open a new page with the values in the two TextFields.
Thanks.

Use getAppletContext().showDocument(URL url).
================================
Sincerely,
Melnikov V
AlarIT programmer
http://www.AlarIT.com
================================

A stupid little problem with FORTE

Hi to everyone,
I'm using FORTE on windows 2000 but I've a little problem: I can't put the characters {} in the source editor.
I've tried with the ASCII code (ALT + 123) and with ALTGR+7 but they don't work. How ca I do?
Thanks

You can copy the them from where you are able to type them, and then paste them in the editor with ctrl+v. To copy, you can use ctrl+c.

Little problem whit gps

Hey
I got a little problem whit my gps.
Yesterday I buy my new nokia e72 + a free navigation.
I also reload my credit to €15.
On the eve I drive whit my car 26km away form home and I also use my gps to know how I have to drive. When I was there I end the navigation and I also call the number to check credit, at that moment I hear that my credit was under €15 so my question is is it normal that I have to pay to use my gps ? Its over €0.80 just to start gps . Is it normal because on ovi gps book stands in big letters ovi gps is totaly FREE . ?
can somebody help me ?
greets

the ovi maps itself is completely free, however, unless you use ovi suite to install the maps you need on your phone, your device has to download all the map data as you drive or walk along, using data, which is not free.
even when you load the maps to your device, you usage of ovi maps will require some data usage to connect to the gps. but it will be GREATLY reduced!

Little Problem with Photoshop CS3

Hi, I have a little problem with Photoshop CS3, I'm not sure if this's because a Windows option that I messed up, but the thing is that I didn't touch any options, or some kind of preferences.
I'm talking about the "little windows" (I don't know the correct name) that come from, in this case, the Filter and Analysis options, they're coming down from their right side, and usually, the come down from their left side. This is really annoying.
Not big deal, but I can't really work properly. I hope you guys can help me, and this's my first post, I hope I didn't break any rule.

Thanks Mylenium, that was the problem, I don't even have a tablet, but that fixed my problem =)
Thanks again.

Hello, I have a little problem with my ipod (3rd generation): I restored my iPod because of problems of wi-fi, then synced my music on itunes and then on my ipod. The problem is that I still do not have wi-fi and my ipod says I have no music. Help me!

Hello, I have a little problem with my ipod (3rd generation): I restored my iPod because of problems of wi-fi, then synced my music on itunes and then on my ipod. The problem is that I still do not have wi-fi and my ipod says I have no music. Help me!

No. In fact, my ipod detects the livebox and the network but I can not connect to the internet.

Little problem in Logic Express 9

Hello all,
I'm having a little problem there..
I bought recently an akai LPD8 controller, i set it up in controller assignment and it works fine.
Now, if i quit Logic, and re-open it, the controller assignment still there. great.
If logic crash or quit for some reason, the assignment are deleted, and this is normal.
The problem starts here, i read that the preferneces file of logic : com.apple.logic.cs and .plist should be present in : myHD/library/prefernces/
There i find all my .cs and .plist file, but not the logic one!
The strange fact is that logic actually save my prefernces, like controller assignment, or arrange window color and go on..
I need to know were to find the controller assigments save file for keep a copy in my mac, for when logic crash, and not reassign everything to the controller.
Thanks a lot,
Ales

Hi
ALES.ambient wrote:
Hello all,
The problem starts here, i read that the preferneces file of logic : com.apple.logic.cs and .plist should be present in : myHD/library/prefernces/
There i find all my .cs and .plist file, but not the logic one!
You are looking in the wrong "Library".
Logic preferences are saved in the <User> Library:
My HD:Users:YOU:Library:Preferences
Note that the User Library is hidden by default in Lion and M Lion. One easy way to get there is to use the Finder:Go menu whilst holding down Option (the User Library will appear in the menu).
CCT

Little problem

Similar Messages

Maybe you are looking for