Little, white pixels on color photos...(need help!)

When I go to my website on a pc and click on the photos that are color, there are white pixels all over the picture. I really need help! Has anyone had this happen to them?
http://www.lacydaniels.com
--Click on proofs
--Click on Stewart
--Click on Prep
--Then click on several of the colored photos

i really need help...
the stewart proof page is not on there anymore, but you can go to any gallery and look at a color pic. i am furious with apple and have been thinking about not using my .mac account anymore!!!!!!

Similar Messages

New to color correction - need help on too bright shot

Need help to fix this shot! I've been messing around with color corrector 3 way and nothing seems to help. I'm new to color correction and would greatly appreciate any advice.
Thanks,
Jenny

When you see white pixels in an overexposed shot, it means that there's often no pixel data to work with.
While the best option is a reshoot (this time with proper monitoring), you may want to try the "Captain's Blowout Fixer" filter available here: http://pistolerapost.com/pluginz/index.html
It let's you looks to see which color channel has the most remaining pixel data (if any) and work with it to overcome production screw-ups like this. Make sure you watch the tutorial on how to properly use the filter.
-DH

IPhone 5 Dead pixel or Dust? Need HELP!!!

Hi guys,
I'm getting paranoid with the one tiny black dot on the screen of my one month old iPhone 5, I don't know if it is a dust/speck or dead pixel inside the screen. I can notice it with white backround or any light colored background. I am very familiar with the stuck pixel, but this is the first time I encounter suspected dead pixel. Can anyone tell me how to determined/differentiate a dead pixel or dust inside the screen? I also check the screen on sleep mode, as far as I can see there was no dust on that area.
Additionally my iPhone has a rattle near the rear camera like clinging sound, how true that is it really normal? They say it's the camera autofocus mechanism??
Thank you,

Alright. Whenever I tilt the phone on any side the dark dot sometimes change color like green, black, red. I wonder why i can't even see it right in front display (like normal holding the phone when reading texts or emails). I can barely see it when tilting to different angles. What do you think it is? Sad to say there was no apple store in our country to dropped by and to check my phone by an expert ot technician.
Appreciate your help dude..

In Photoshop CS4 extended, trying to apply sepia filter to a photo, need help

I've been re-watching the videos on smart filters, and also I remember having seen one video (either in NAPP or here or on Lynda.com) where one can make a nice sepia tone color for a photo. I see the option in the filter menu, at the bottom of the layers panel, and one can choose sepia, and then a layer appears, called photo filter 1, above my "smart object" image, but then I don't see any change. What do I do next, to get the sepia effect applied over my original (now smart) image? Can someone take me from there, or give me a reference to the training video that covers this?
Thanks in advance.

Here's two other ways when in cmyk, but the settings below may need some
tweaking depending on which cmyk profile your using and your idea of what sepia
should look like.
For these to work, you'll have to desaturate the layer: To retain the smart
object, you could double click on the smart object icon, then in the image
that opens, go to Image>Adjustments>Desaturate and then save. This will
update the smart object in your original image.
1. Add a Color fill adjustment layer and set the layer blending mode to either overlay, softlight
or color.
2. Use a color balance adjustment layer and only adjust the Midtones.
MTSTUNER

Problems uploading photos, Need help

Hi all:
I've been using Adobe Photoshop Elements 6 for awhile now and all of a sudden I can't upload my photos thru the card reader. When I click on File in Adobe's Program and then click on get photos from camera or card reader one of the options that shows up is my Epson Twain Printer but not a camera setting so I can't click on camera as an option. I need to get these photos to someone in a hurry, who is helping me with my sick
horse.
Please help ASAP. Thanks much.
Timoriah

Help. I'm having same problem. I have 3 cameras I upload to elements 6.0 all the time...today it will only let me upload the Nikon. The other 2 Canons are not an option when I try to "get photos from camera" nor can I "refresh" it just reverts back to no device found. I have re-booted, turned on, tried everything I can think of....now what do I do????

Color blind: need help :D :D :D

Hi guys,
I know this is so silly but i need your help to get the hex
value for Gold. the last time I tried that, somebody said that it
was neon green. I cant ask that to so many people here in our
office because I'm the only one designing a page here. I would
really appreciate if someone can give me the Hex value for gold.
hahahaha. I love you all!
Cfire

Gold comes in a wide range of colors — just look in any
Jeweller's window!
A bright Gold might be: f4c000
and a representation of just one of Pantone's many metallic
Gold ink is: ad8800

Stuck Pixel or not? Need help!

Hello!
I just got my MBA delivered and I have a bright white dot in the middle of my screen, I'm not sure if it called a dead pixel or not as black are called on LCD screens. It's a small spot but bright enough to notice it which is irritating since I just got it delivered.
Anyone have an idea how to fix this or if it classifies as a hardware failure/DOA at all?

You can download a program to test your screen here:
http://www.versiontracker.com/dyn/moreinfo/macosx/11661
This is what I use to test my screens. A pixel stuck white is very unusual. When a pixel is "stuck" it's usually a single sub-pixel (red, green, or blue) that is stuck on. These are very easy to see on a black background. Try the program and let us know what you see.

My ipad won't sync photos, need help please

my ipad won't sync photos anymore, anyone out there can help

You could try clearing the photo cache.
You could also try a reset of the iPad and see if photos sync after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Need help editing scanned images of old photo album pages PSE 9

Before I begin this project, I thought I'd get some advice from someone who has undertaken a similar project. I have three photo albums from the 50's and 60's. The albums were made by my mother who mounted the photos (mostly black and white but some color photos) on construction paper (of various colors) using the corner holders or glue. She hand cut the construction paper so each page is not a perfect rectangle ( about 11" tall, 8.5" wide). The pages were punched and put into a three-ring binder.
She added text to the edge of the photo and/or to the construction paper. Each page contains one to 6 photos and text. Each album has about 120 pages. I want to keep the notes on the construction paper so I scanned each page into a TIF files, 400 dpi and stored the images in a separate folder for each volume.
I use (poorly) PSE 9. I see it has a auto straighten/crop feature that can be used one photo at a time. I tried the divide scanned images function and that did not fully separate all images on the page and also created an image for stray objects on the page such as an unused corner holder. (I know those things have a better name but it escapes me now.)
I plan to create photo books for my siblings. I am now thinking of cropping the image of each page (rather than each photo on the page) into a uniform size, adjusting levels, contrast and sharpness, saving this image to a JPEG file, and using these edited JPEG images to create the photo book. Since each page was hand-cut, there will areas of white where one page was torn or cut smaller than another page. Some pages will have blanks where old photos have been lost leaving behind only the corner things. It won't be perfect but it will be an image of the album as it exists today.
My questions are:
The pages are about 11 by 8.5. Does anyone know a photo service that prints photo albums in a portrait layout in this size? I have been unable to find one; it looks like most online photo books are wider rather than taller.
Let's assume I use a company such as Shutterfly that offers a 12x12 format. I assume it would be better to edit the images in PSE9 rather than any online software. What should I do to keep the proportions in the current images true but make the image fit a 12x12 page, for example?
IS there any other editing software anyone can recommend that will speed this up, hopefully a software that would take multiple photos at one time, auto-straighten and auto crop to a set size? And also auto contrast/level/sharp. If I could use such auto features on these images and then go back and adjust the photos that did not play well with the auto features, that would save me time.
I appreciate anyone's input. I dread doing this but we have one set of photos and 5 siblings so it has to be done. Thanks!

Hi,
Mentioning your issues one by one:
1) PSE does not have any portrait Photobook available, so your thought was the best way to get the work done is by choosing the 12x12 - shutterfly one.
2) PSe does a good job of editing the images. You can set your images of approx. 11x8 size to fit to the 12x12 page. Just choose a one photo page Layout for the page and then right click on the image to " Fit photo in the frame".
3) If more edits are required for the image, you can easily go to Advanced mode and edit your photos, layouts, move the frames, images or add effects to the images.
4) Photo book creation sure takes time. because, you want it to be the best. I am sure PSE would help you best here.
Go ahead and create you photobook. Inc ase you get stuck somewhere, you can always post here to get help!
Cheers,
Swarnima

I have a 13 inch MacBook Pro (2009) & the "White Screen of Death" is present. Need help?

I have a 13 inch MacBook Pro (2009). Recently I bought an extended hard drive because I had used up the memory on my iDisk. As I was running the Time Machine back up on my new extended drive, the battery on my Pro ran out causing it to shut down. Once I hooked up my Pro to the power cord & logged in, the "White Screen of Death" appeared on the home display. Obviously the battery still works, my phone is able to charge along with the extended drive, I am able to adjust the lighting on my keyboard along with adjusting the brightness on my screen, but the "White Screen" remains. I need help in determining the cause of this issue & the steps I'll need to take in order to resolve this. I love my Pro, all my documents, photos & music are on it & the last thing I want to do is kill my wallet by buying a new Pro. So could someone on here please help me? It would be greatly appreciated & I thank you in advance!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to a Mac Pro tower, not to any other model. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

White pixels on my pics when i post to iweb...

I am a photographer and use iWeb for my main website. Lately I have been noticing little white pixels on some of my pics! It doesn't show up on my computer (my mac), but it does show up on my home pc. I have asked friends to look at my site for me to see if the pixels show up for them. The friends that have a pc saw the pixels and the ones with a mac did not! How strange!
If anyone knows how to fix this problem...I would greatly appreciate it!!
http://www.lacydaniels.com
(go to proofs, then jack, then scroll down towards the bottom and click on 22b) (**oh...and this only happens to color pics!)

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

White pixel appearing in screen in upper left corner when using fullscreen

hi,
Whenever I use fullscreen a white pixel will appear in the upper left corner of the screen.
The pixel is also appearing in a screenshot, so it must be software.
Last week I did a clean install on my mac, and only put my files back (not the preferences). But I have the same problem again.
When I delete the loginwindow.plist and log off and in again, the problem is gone. But will reappear when my mac will go to sleep and wake again (or restart).
Can anybody help me fix the problem?
Thanks!

I suddenly had the same problem (little white pixel in very top left of screen)
Resetting the PRAM fixed this for me.
Resetting PRAM:
Start up computer hold down CommandOption+PR
Hold until 2nd startup sound
Hope it works for you!

Need help separating colors in a photo for screen print

Hey guys, I'm relatively new to Photoshop but I know most of the basics. I have a design here that a band would like to print on a shirt in 2-3 colors: black, grey, and white. Technically I only need the grey and white because it is being printed on a black shirt. I need to first convert it to black/grey/white, then I need to separate the colors into layers, but I'm just not sure the correct way to do so. Could someone please help me with this? I would greatly appreciate it. Here is the design: http://i50.tinypic.com/dpk8r9.jpg

Your image is at 72ppi. Which is not recommended for print.
Anyway, coming to your actual question, this is a mixture of color tones across the image - not just one place.
If you're looking at printing it in 3 shades, why don't you consider making the image 'Greyscale' in Photoshop?
Another suggestion would be to talk to the printer who is going to print this to a t-shirt and explore possibilities.
-ST

Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help :(

Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Q: How do I Mask/Layer a color photo with a black and white photo?

This is what I want to do. I've done it before but cannot remember for the life of me how to do it again. I want to put a color photo under (its own) black and white photo and then erase or remove or something (I can't remember the tool to do it) but I want to be able to see some of the color photo in my black and white photo. For example, say I have a pic of the Disneyland Castle. I want to make the pic black and white and then with a layer or mask (whichever one) have the exact colors of the picture underneith it show up after I have used the paint brush to remove the black and white...is anyone understanding me? When I did it before I know I did it in only a few steps, it wasn't super complicated, and I'm probably stupid for not knowing how to do it now. Thanks!
Lindsey Henry

Lindsey,
First, look at the Channels in the B/W. Probably, you can use one of those as a Selection and then as a Layer Mask. If not perfect, then you can likely get close. If you need to, you might want to Blend more than one of those Channels.
If you have an issue "collecting" the Channels, just get your B/W into a separate Image, and then drag individual Channels back to your composite image, and use them, as is necessary.
Hope that some of those ideas are useful,
Hunt
BTW - turn OFF the color for Channels, so that you can see them as B/W, as that will help you see their makeup.

Little, white pixels on color photos...(need help!)

Similar Messages

Maybe you are looking for