Live 5 keeps missing my installed drivers, GPU, INF drivers issue

1 time out of 10 my sli gtx 580's have a exclamsion mark on the in device manager & my resolution is only 1280 x 1024 on my 27" native 1080p 3d monitor. If I re-install the nvidia lastest drivers, restart and unplugall my usb devices it sorts it, why?
Also Live 5 update keeps saying I need to download intel.INF update 9.2.0.1021 to 9.2.0.1030, which when I try it says it was succussfuly & I should restart but no joy ,Im still on the older version?
Same with realtek PCIe network drivers 7.37.1229.2010 update to 7.46.610.2011 BSOD once installed on restart!
Help anyone else on the Big Bang Marshall having similer issues?
Thanks

My reply only concerns INF. The Intel INF drivers is a complete package for a large number of chipsets. The updated file simply adds additional chipsets to the collection. It therefore will not change anything on what you already have. Each MB will simply extract the appropriate drivers for the chipset on the MB from the collection in the file.
Your MB will use only that part of the file indicated below.
List of chipsets covered by that file:
Intel® 3 Series Chipsets
Intel® 4 Series Chipset
Intel® 5 Series Chipset
Intel® 6 Series Chipset
Intel® 848P Chipset
Intel® 865 Chipset Family
Intel® 875P Chipset
Intel® 910 Express Chipset Family
Intel® 915 Express Chipset Family
Intel® 915GV Express Chipset (embedded)
Intel® 925X Express Chipset Family
Intel® 945 Express Chipset Family
Intel® 945G Express Chipset (embedded)
Intel® 946 Express Chipset Family
Intel® 955X Express Chipset
Intel® 965 Express Chipset Family
Intel® 975X Express Chipset
Intel® C200 Series Chipset
Intel® Chipset Software Installation Utility
Intel® E7221 Chipset
Intel® E7230 Chipset
Intel® E7320 Chipset
Intel® E7520 Chipset
Intel® E7525 Chipset
Intel® E8500 Chipset
Intel® E8501 Chipset
Intel® E8870 Chipset
Intel® NM10 Express Chipset
Intel® Q35 Express Chipset (embedded)
Intel® Q45 Express Chipset (embedded)
Intel® Q965 Express Chipset (embedded)
Intel® System Controller Hub US15W Chipset (Embedded)
Intel® X58 Express Chipset
Mobile Intel® 4 Series Express Chipset Family
Mobile Intel® 5 Series Chipset
Mobile Intel® 6 Series Chipset
Mobile Intel® 910GML Express Chipset
Mobile Intel® 915 Express Chipset Family
Mobile Intel® 915GME Express Chipset
Mobile Intel® 945 Express Chipset Family
Mobile Intel® 945GME Express Chipset
Mobile Intel® 945GSE Express Chipset (embedded)
Mobile Intel® 965 Express Chipset Family
Mobile Intel® GM45 Express Chipset (embedded)
Mobile Intel® GME965 Express Chipset
Mobile Intel® HM55 Express Chipset
Mobile Intel® HM57 Express Chipset
Mobile Intel® QM57 Express Chipset
Mobile Intel® QS57 Express Chipset

Similar Messages

SCCM Driver Injection : What am I missing? Need help with getting drivers installing correctly in my environment.

Everyone,
I'm not new to using SCCM, but i'm VERY new to setting up and managing it. I have just laid it down for the school district that I manage, and i'm loving it. Imaging is going great, all but one thing now...drivers installing.
Let me tell you what I've been doing, so hopefully a kind soul out there can tell me where my logic of the driver "injection" process is lacking and might can fill in some gaps.
I downloaded all drivers pertaining to the 7-8 series of computers we have in our environment currently, and imported them based on a criteria such as this:
x86.LenovoEdge71.Desktop
x86.DellOpti755.Desktop
so forth and so on
I created packages based on the same exact naming scheme. I update my distribution point at the end of the import, and all the drivers/packages/categories are in place. When I go to Monitoring/Distribution Status/Content Status, all of my packages
show up , but under targeted it says 0.
My thoughts from reading online, is I upload all these drivers and during my task sequence where it says it's "applying device drivers" it's set to "install only the best matched compatible drivers" and "consider drivers from all
categories". I also checked "do unattended installation of unsigned drivers no versions of Windows where this is allowed".
so correct me if my thinking is incorrect, it should search through all series of the computers we have in our environment and grab the best drivers from the overall database. Is this not right?
The reason I ask this, is we have a few hundred HP 6000 Pro desktops. WHen I image them, it comes up with 2 unknown devices. OF these, I can manually point them at the folder from which I uploaded the drivers for this series/category and it installs
100% successfully...MANUALLY. What's the reasoning behind this?
I can't help but think there's something missing in my process / logic and I need to be set straight.
Can someone out there tell me what i'm doing wrong? We're planning a district-wide re-imaging before summer's over, and the clock's ticking...but the drivers being installed are all that's keeping us from starting our migrations.
Any help on this is GREATLY appreciated, thank you very much!

You have setup everything correct, but for your desired result you need to use "Apply Driver Package" Task rather than "Auto Apply Drivers".
Auto Apply drivers will install the best matched/compatible drivers for only the PNP devices.For more info on this:http://technet.microsoft.com/en-us/library/bb680990.aspx
Whereas "Apply Driver Package" would install all drivers you have in the package and hence you don't see the unknown drivers in device manager. For more info on this: http://technet.microsoft.com/en-us/library/bb680403.aspx
If you have multiple models, create this task for each model individually and then associate with a WMI query condition under Options tab to check the manufacturer/model
Example: Select * from Win32_ComputerSystem where Manufacturer = "HP" and Model Like "6000%"
Regards,
Manohar Pusala

HT1926 When I go to install it Itunes it says I am missing something that keeps it from installing. It does not give a error code so I am clueless.

I dont know know what to do . I wont give me a error code it keeps saying that its missing something. Its not specific! It says the installer package is missing something to keep it from installing. I have downloaded it again and its says the same Dx

It says the installer package is missing something to keep it from installing.
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I live in China and keep having iTunes installed in Chinese but I need it in English. How do I install it in English?

I live in China and keep having iTunes installed in Chinese but I need it in English. How do I install it in English?

When you open iTunes, follow these steps: Edit
-Prefrences
-Under General find Language
Hope that solved your problem

WARNING: at drivers/gpu/drm/drm_crtc_helper.c

Hi.
I am new to the administration Linux.
Version OS - Oracle Linux 5.8
Linux version 2.6.32-300.39.2.el5uek
I installed the update two days ago.
Today, after a reboot, I found the following messages.
I do not understand the messages.
Tell me what it could be and where you can read about it.
Thanks in advance.
Jan 17 11:54:19 Linuxdb hcid[2901]: Bluetooth HCI daemon
Jan 17 11:54:19 Linuxdb kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
Jan 17 11:54:19 Linuxdb kernel: [drm] Initialized drm 1.1.0 20060810
Jan 17 11:54:19 Linuxdb kernel: atl1 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Jan 17 11:54:19 Linuxdb kernel: atl1 0000:01:00.0: version 2.1.3
Jan 17 11:54:19 Linuxdb kernel: i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 17 11:54:19 Linuxdb kernel: [drm] set up 7M of stolen space
Jan 17 11:54:19 Linuxdb kernel: ------------[ cut here ]------------
Jan 17 11:54:19 Linuxdb kernel: WARNING: at drivers/gpu/drm/drm_crtc_helper.c:1036 drm_helper_initial_config+0x4e/0x69 [drm_kms_helper]()
Jan 17 11:54:19 Linuxdb kernel: Hardware name: System Product Name
Jan 17 11:54:19 Linuxdb kernel: No connectors reported connected with modes
Jan 17 11:54:19 Linuxdb kernel: Modules linked in: snd_seq_device(U) snd_pcm_oss(U) snd_mixer_oss(U) i915(+)(U) atl1(U) serio_raw(U) mii(U) drm_kms_helper(U) snd_pcm(U) drm(U) i2c_algo_bit(U) snd_timer(U) parport_pc(U) i2c_i801(U) snd(U) parport(U) soundcore(U) i2c_core(U) floppy(U) snd_page_alloc(U) pcspkr(U) video(U) iTCO_wdt(U) iTCO_vendor_support(U) output(U) usb_storage(U) shpchp(U) pata_acpi(U) ata_piix(U) ata_generic(U)
Jan 17 11:54:19 Linuxdb kernel: Pid: 335, comm: modprobe Not tainted 2.6.32-300.39.2.el5uek #1
Jan 17 11:54:19 Linuxdb kernel: Call Trace:
Jan 17 11:54:19 Linuxdb kernel: [<ffffffffa015f254>] ? drm_helper_initial_config+0x4e/0x69 [drm_kms_helper]
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff81057854>] warn_slowpath_common+0x7c/0x94
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff810578eb>] warn_slowpath_fmt+0x69/0x6b
Jan 17 11:54:19 Linuxdb kernel: [<ffffffffa015f1c9>] ? drm_helper_probe_connector_modes+0x40/0x7d [drm_kms_helper]
Jan 17 11:54:19 Linuxdb kernel: [<ffffffffa015f254>] drm_helper_initial_config+0x4e/0x69 [drm_kms_helper]
Jan 17 11:54:19 Linuxdb kernel: [<ffffffffa018928b>] i915_driver_load+0xf3a/0x1019 [i915]
Jan 17 11:54:19 Linuxdb kernel: [<ffffffffa01040f1>] ? drm_get_minor+0x20c/0x277 [drm]
Jan 17 11:54:19 Linuxdb kernel: [<ffffffffa0104636>] drm_get_dev+0x32e/0x42f [drm]
Jan 17 11:54:19 Linuxdb kernel: [<ffffffffa01b09a4>] i915_pci_probe+0x15/0xd5 [i915]
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff81249a89>] local_pci_probe+0x17/0x1b
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff8124a5f9>] pci_device_probe+0xc8/0xf4
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff812e5599>] ? driver_sysfs_add+0x52/0x78
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff812e5774>] driver_probe_device+0xf5/0x215
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff812e58ed>] __driver_attach+0x59/0x7c
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff812e5894>] ? __driver_attach+0x0/0x7c
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff812e5894>] ? __driver_attach+0x0/0x7c
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff812e4bf0>] bus_for_each_dev+0x4e/0x7d
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff812e5545>] driver_attach+0x21/0x23
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff812e46ab>] bus_add_driver+0xde/0x266
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff812e5cba>] driver_register+0xa3/0x11a
Jan 17 11:54:19 Linuxdb kernel: [<ffffffffa01cf000>] ? i915_init+0x0/0x65 [i915]
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff8124a877>] __pci_register_driver+0x55/0xb1
Jan 17 11:54:19 Linuxdb kernel: [<ffffffffa01cf000>] ? i915_init+0x0/0x65 [i915]
Jan 17 11:54:19 Linuxdb kernel: [<ffffffffa00ffcfe>] drm_init+0x6d/0xd0 [drm]
Jan 17 11:54:19 Linuxdb kernel: [<ffffffffa01cf000>] ? i915_init+0x0/0x65 [i915]
Jan 17 11:54:19 Linuxdb kernel: [<ffffffffa01cf063>] i915_init+0x63/0x65 [i915]
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff8100a06a>] do_one_initcall+0x5f/0x15a
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff8109037e>] sys_init_module+0xd0/0x22a
Jan 17 11:54:19 Linuxdb kernel: [<ffffffff81011db2>] system_call_fastpath+0x16/0x1b
Jan 17 11:54:19 Linuxdb kernel: ---[ end trace 9ec2506fbcefa72d ]---
Jan 17 11:54:19 Linuxdb kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Jan 17 11:54:19 Linuxdb kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 17 11:54:19 Linuxdb kernel: input: HDA Digital PCBeep as /class/input/input4
Jan 17 11:54:19 Linuxdb kernel: Error: Driver 'pcspkr' is already registered, aborting...
Jan 17 11:54:19 Linuxdb kernel: lp0: using parport0 (interrupt-driven).
Jan 17 11:54:19 Linuxdb kernel: lp0: console ready
Jan 17 11:54:19 Linuxdb kernel: md: Autodetecting RAID arrays.
Jan 17 11:54:19 Linuxdb kernel: md: Scanned 0 and added 0 devices.
Jan 17 11:54:19 Linuxdb kernel: md: autorun ...
Jan 17 11:54:19 Linuxdb kernel: md: ... autorun DONE.

Did you update the system or is this a new installation? Please keep in mind that Oracle Linux is for enterprise grade hardware and not designed for desktop or mobile computers. Isn't the Intel i915 built-in graphics controller typical for desktop grade hardware?
To address your problem at hand: You can try to add "i915.modeset=0" to your kernel parameter line to disable DRM, which usually helps. You can add the parameter temporary at the Grub boot menu or editing /etc/grub.conf
Btw, are you running Oracle linux 32-bit instead of x86_64? Why?

My iPhone 6+ keeps rebooting after installing iOS 8.3

I have a 128Gb iPhone 6+. When I downloaded and installed iOS 8.3 via WIFI, it went through the usual download sequence and then started continually rebooting. After about 20 or so reboots, I got a white screen with a carrier signal on the top left, a location icon and a grayed-out bluetooth icon and the battery level indicator on the top right, and a curious "information" icon (a letter "i" in a circle) at the bottom right of the screen.
I tried tapping on the "i" but got no response. Then the iPhone went into the reboot cycle again. After several reboot cycles, I got the same white screen again. Then the iPhone again started rebooting and hasn't stopped.
My iPhone 6+ has been problematic since I installed iOS 8.1.2. Several random reboots (about 4 cycles, before the iPhone returned to "normal") and some other issues that I didn't document.
I brought the iPhone to the nearest authorized Apple repair center. They said that they could not find any problem and neither could they duplicate the issue I experienced. They recommended that the next time reboots happened that I should make a video of the error. Also, they recommended that I keep all of the apps updated (which I conscientiously do). So I decided to make a log of all the errors since the iPhone was returned to me.
Here are the entries to my log:
iPhone 6+ Errors since March 30, 2015
218 apps not synced
Failure to Sync - 0xE800002D - The app was not installed on the iPhone because of an unknown error
iPhone self reboot during reinstallation of 218 apps not synced
Missing Google Authenticator settings.
AutoSMS app could not be reinstalled. Doesn't exist in App Store.
iPhone self reboot during phone call. Some apps reinstalling in background.
Could not download additional sound modules for Soundprism Pro. Still could not download modules after reinstalling app.
Noticed keyboard error when inputting Apple ID password. When pressing keys, instead of character pressed, a question mark appeared. Photo taken with another phone. Could not do a screenshot because iPhone screenshot would not work.
iPhone self reboot during text messaging. 9 apps updating (April 1, 2015, 11:30am)
Audible could not log in properly. Tried reinstalling app.
After manual reboot (cold reboot), screenshot functions works and no noticeable errors with keyboard.
Turned on full access for Fleksy , GIF and Symbols Keyboards. (April 1, 2015, 12:20 pm)
Noticed all 3rd party apps (Kindle, Audible, Dropbox, 1Password, YouTube) credentials need to be re inputted.
iPhone self reboot while testing GIF keyboard. Pasted an animated GIF on a test text message. Was able to paste GIF then phone rebooted. (April 1, 2015, 1:41pm) reboot took approximately 2mins.
GIF could not be pasted into Viber message. Also noticed screenshot function not working. (April 1, 2015, 1:53pm)
After cold reboot, screenshot function works. (April 1, 2015, 1:57pm).
iPhone self reboot while installing Ask Video9 apps. (April 2, 2014, 12:32am). Reboot time approximately 2mins.
Noticed standard keyboard error ("?s" when key is pressed) appeared. Also screenshot function not working.
After warm reboot (Home-Power key), all functions work. Reboot time approximately 1min.
iPhone self reboot while updating RoomScan Pro app and installing Via Crucis app. (April 2, 2015, 7:53am) Reboot time approximately 1min.
Screenshot function not working.
After warm reboot, screenshot function works. Reboot time approximately 2 mins.
iPhone self reboot while installing Way of the Cross app. (April 2, 2015, 8:03am) Reboot time approximately 1min.
Noticed a duplicate of this note appeared with time stamp 3mins apart from this note.
iPhone self reboot while typing update to this note (April 2, 2015, 8:07am) Reboot time approximately 1min.
Noticed that Way of the Cross app fully installed and 5 other apps updated. Looks like reboots happen after app updates or installations.
Noticed screenshot function not working.
iPhone self reboot while installing iMassExplained app. (April 2, 2015, 8:18am) Reboot time approximately 1min.
Noticed screenshot function working.
iPhone self reboot while installing Candy Tech app. (April 2, 2014, 1:00pm) Reboot time approximately 1min.
iPhone self reboot while installing Google Chrome app. (April 2, 2014, 2:42pm) Reboot time approximately 1min.
iPhone self reboot while playing music through a Bluetooth device. (April 2, 2015, 7:30pm) Reboot approximately 1min.
iPhone self reboot while scanning barcode for MyFitnessPal app. (April 3, 2014, 10:40pm) Reboot time approximately 1min.
Noticed Microsoft Word app not activating.
iPhone self reboot while checking App Store app. (April 3, 2015, 1:05am) Reboot time approximately 1min.
iPhone self reboot while using Microsoft Word app and Google Maps. (April 3, 2015, 1:15am) Reboot time approximately 1min.
Noticed "?s" when typing password for Apple ID (April 3, 2015, 4:40pm) Reboot time approximately 2mins.
Noticed that Movie ads not working in Subway Surfers. Then checked screenshot function. Screenshot function not working. March 3, 2015, 7:42pm.
Manual reboot corrected screenshot function. Movie ads still not working for Subway Surfers.
iPhone self reboot while changing lock screen with wallpaper created by Homescreen app. Also Quest Keeper app was installing (April 4, 2015, 1:35am) Reboot time approximately 1min.
Screenshot function not working.
Manual reboot DID NOT correct screenshot function.
2nd manual reboot got screenshot function working. But Passcode entry screen had Home Screen wallpaper instead of Lock Screen wallpaper and screen taps would not register. Passcode entry only working when the screen was tapped and swiped up from the camera icon. When camera was activated from the non working Passcode Entry Screen, a new working screen appeared allowing Passcode entry and after the screen, the camera app was opened.
iPhone self reboot while downloading Bible Gateway app. (April 4, 2015, 1:55am) Reboot time approximately 1min. Screenshot function not working.
Manual reboot DID NOT correct screenshot function.
2nd manual reboot got screenshot function working.
iPhone self reboot while downloading trying to change Home Screen wallpaper. (April 4, 2015, 2:05am) Reboot time approximately 1min. Still could not change either Lock or Home screen wallpaper.
iPhone self reboot sharing/emailing document from iMports app. (April 4, 2015, 10:57am) Reboot time approximately 1min.
iPhone self reboot while installing Candle app. (April 4, 2015, 9:40pm) Reboot time approximately 1min.
iPhone self reboot while adding picture to phone contact. (April 6, 2015, 2:47pm) Reboot time approximately 1min.
iPhone self reboot. (April 6, 2015, 2:49pm) Reboot time approximately 1min.
iPhone self reboot TWICE. (April 6, 2015, 4:11pm) Reboot time approximately 1min each. Fuzel Collage app was updating.
iPhone self reboot while using App Store. (April 6, 2015, 4:15pm) Reboot time approximately 1min.
iPhone self reboot while using App Store. (April 6, 2015, 7:42pm) Reboot time approximately 1min.
iPhone self reboots TWICE successively while installing 7IHS 2015 2Q app. (April 7, 2015, 9:37am) Reboot time approximately 1min per reboot.
iPhone self reboot. (April 7, 2015, 6:25pm) Reboot time approximately 1min.
iPhone self reboot. (April 7, 2015, 7:00pm) Reboot time approximately 1min.
iPhone self Renoir while using Bieber app. (April 7, 2015, 7:37pm) Reboot time approximately 1min.
iPhone self reboot. (April 7, 2015, 9:14pm) Reboot time approximately 1min.
iPhone self reboot. (April 7, 2015, 10:45pm) Reboot time approximately 1min.
iPhone self reboot while copying message from Viber app to iMessage. (April 8, 2015, 12:39pm) Reboot time approximately 1min.
iPhone self reboot while playing music. (April 8, 2015, 2:34pm) Reboot time approximately 1min.
iPhone self reboot while playing music. (April 8, 2015, 2:37pm) Reboot time approximately 1min.
Music shuffles by itself from one album to another.
iPhone self reboot while playing music. (April 8, 2015, 2:57pm) Reboot time approximately 2min.
iPhone self reboot while installing How To Tie A Tie app. (April 10, 2015, 12:12am) Reboot time approximately 2min.
iPhone self reboot while downloading iOS 8.3 update and writing a text message. (April 10, 2015, 7:25am) Reboot time approximately 1min.
I hope the details can help you diagnose the issue.
Thank you for all your help.

Yeah my is the same. Ive had enough of it now...Its been a week of my phone crashing & apps crashing, camera crashing, call dropping out all the time. I've had enough. Apple have done nothing to help it. Ive an upgrade & myself & my partner are buying samsungs.
P.S I've downloaded both ios 8 & ios.8.2 straight from my PC.
I have done all of the above & phone is still unstable & crashes apps all the time. Right now as we speak whats app wont work.
Waited to long now...Apple are doing nothing to help anyone anymore. Company is going down the drain fast.

How Do I Install OS 9 Disc Drivers?

Greetings,
I need help with this, thanks for any and all assistance!
I have in front of me the second release (late 1999) Power Mac G4. It came with OS 9.0 installed and I have all of the original discs.
My mistake is that I did an erase and install of OS X Tiger without checking off the box to preserve OS 9 (I forgot the specific language). My reasoning was that the OS 9.0 installation was so completely borked that I couldn't even update it, I figured that it would be best to start from a clean disc. I also reasoned that the option for OS 9 (Classic) support would be inherent to the OS X installation and I could come back and enable it.
Now I can't reinstall OS 9 because the disc drivers are not on the disc, they were erased during the install. I read this information on a prior post on this forum.
I have the OS X installation disc running again, there are options and customizations for everything but nothing that I have seen anywhere to install OS 9 disc drivers or Classic support . . . . HELP!
So . . . . what now? This computer has to run Classic for much needed OS 9 applications. Now I can't even restore it to it's original state.
Any and all help would be very very appreciated!
Peace,
Gail

Limnos,
To reply:
"I don't think it is possible to retroactively install OS9 drivers."
I don't think so either, there is no option anywhere on the OS X Tiger disc that lets me chose anything to do with installing OS 9 or classic.
"Probably your best bet would be to copy all the data you want off the drive, then go back and erase the drive, this time making sure you click the option to install OS9 drivers."
I did this the first time that I installed Tiger, I saw the option to keep the OS 9 folder but since OS 9 was so completely screwed up on this computer I thought to do a complete fresh reinstall. I did not realize that the OS 9 disc drivers would only be available to me if OS 9 was ALREADY installed. Now that OS 9 is off the computer there is no option to install or keep OS 9 folders and/or Classic.
"You should then be able to install OS9 either from your original OS9 CDs or from "Classic" on Tiger."
There is no "Classic" on the retail Tiger install DVD unfortunately. I am not able to reinstall OS 9 because the installer does not "see" the hard drive and so does not recognize a location to install to. That began my search in the forum for a way to install OS 9 drivers so that I can reinstall OS 9.
What a mess

Installing additional 32bit printer drivers on Windows Server 2008R2

Hi,
I'm trying to add additional printer drivers (32bit) on a 64bit server so that 64bit and 32bit clients can add printers from the print server. I have found several posts about this and none has helped me so far. I found one from GeorgeLawr that
I copied below:
I have found the best way to do this is:
Install the printer/driver for the type of device you are installing on the server, i.e. Xerox printer WCP7765 and driver for this printer (64-bit).
Share the printer out (optional).
Test print to make sure it works ok.
Then from a 32-bit client (must be logged into the client with an account that has admin rights on print server), browse the printer server shares, i.e. go to "Start\Run" and type \\printservername\ then go to "Printers and Faxes" right-click
and select "Connect" for the required printer and it will say it does not have the required drivers and will ask if you want to install.
Install the required 32-bit driver and it will install on the print server. You then have to enable this in the printer properties.
In the print queue window that opens up after you install the queue, go to "Printer\Properties\Sharing\Additional Drivers" and enable the "Intel Windows 2000 or XP" option (note, if you are doing this from a Windows 7/Vista client you might
have to click "Change Sharing Options" or something, before you can click "Additional Drivers" option).
And that's it. You should now be able to go to a different 32-bit client and add the printer and print no problem.
This one gets me closer to an answer; however, on step 5 once it asks for driver path, I direct it to the CD that has the driver and I get a message that states something similar to "this driver is not correct for this version of Windows"
It's like it's looking for 64bit drivers and the drivers on the CD are 32bit. The printer on the (64bit) server is already installed. I'm on the 32bit client.
Can somebody help me get this correct?
Thanks,
MC

Hi,
We can add drivers for client computers running 32-bit or 64-bit versions of Windows.
To add client printer drivers to the print server
==================================
1. Open Print Management.
2. In the left pane, click Print Servers, click the applicable print server, and then click Printers.
3. In the center pane, right-click the printer to which you want to add additional printer drivers, and then click Manage Sharing.
4. Click Additional Drivers. The Additional Drivers dialog box appears.
5. Select the check box of the processor architecture for which you want to add drivers.
For example, if the print server is running an x64-based edition of Windows, select the x86 check box to install 32-bit version printer drivers for client computers running 32-bit versions of Windows.
6. If the print server does not already have the appropriate printer drivers in its driver store, Windows prompts you for the location of the driver files. Download and extract the appropriate driver files, and then in the dialog box that appears, specify
the path to the .inf file of the driver.
Note: You might not be able to extract some printer drivers without installing them. If this is the case, log on to a client computer that uses the same processor architecture as the printer drivers that you want to add to the print server, and install those
printer drivers. Then use Print Management from the client computer to connect to the print server, and add the additional drivers from the Additional Drivers dialog box. Windows automatically uploads the drivers from the client computer to the print server.
For details:
Print driver installation on 32-bit versus 64-bit servers
http://blogs.technet.com/b/askperf/archive/2010/01/19/print-driver-installation-on-32-bit-versus-64-bit-servers.aspx
Hope this helps!
Best Regards
Elytis Cheng
Elytis Cheng
TechNet Community Support

I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?

I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally.
tt2

Error message "Update, Live update" missing pieces

When i turn my computer on, it comes on but I'm getting an error message saying there are missing pieces, reinstall Live Update
I just installed leopard on my macbook pro last week. I was told that in order to bring it up to the current operating system i need to install leopard then snow leopard then lion and that is what I was trying to do. The computer still comes on but what does this mean and what should I do?
Mac osx 10.5.8
Thank you

HI Mithun ,
Check if that billing document is there in VFX3 . If it is there then try to clear it from there and then try to reverse it.
Hopefully it will be done.
Regards,
Nikhil

HT4477 One complete family file missing after installing iPhoto 11 ??

One complete family file of photo's is missing after installing iPhoto 11. Installation went smoothly, and all other files complete. Have checked thru entire photo lists, including photo list at the top. Found two photo's in that should have been in that photo list that were downloaded 2 months prior to installing iPhoto 11. I keep files of each family branch on left side iPhoto window. Only the one file is missing. ????

I meant folder. Have 6 kids, and to keep track of each family quickly, I set up folders on left side of iPhoto. All others are there.

HT201401 keeps trying to install device driver each time i plug in the iphone

keeps trying to install device driver each time i plug in the iphone

I guess there's a missing device driver in your OS.

How to install nokia 6020 modem drivers?

i have a nokia 6020 phone,i want to used it as a modem for my pc but i cant install the .inf file that i downloaded... tnx for helping!

Please HELP!
My Nokia is 6020, I would like to use it as a modem for a notebook (with Windows XP).I have CA-42 cable with a disk, so Nokia PC Suite was installed on my notebook, but attempt to connect to the Internet was fault because the notebook regarded the built-in modem as appropriate one and the only potential. So I downloaded Nokia6020IrDA_2000_XP.inf drivers from www.nokia.ru . It didn’t work either. Now it identifies “PC Connectivity Bluetooth Modem - connected to COM6” (that is funny – I have no Bluetooth at all!). All Mobile settings are correct.

Intel INF Drivers

Hi
In MSI'sr site I saw that Intel INF Drivers are supported by win9x (I use WIN98SE).
After downloading and extracting I read, in the readme.txt file, the following:
One of the following operating systems must be
fully installed and running on the system
before installing this software:
Windows* 2000 5.00.2195 (Original Release)
Windows* XP 5.10.2600 (Original Release)
Windows Server* 2003 5.20.3790 (Original Release)
Please help,
Thanks in advance
xyoavx

http://developer.intel.com/products/chipsets/index.htm
select the chipset, then select Product support tab, and click Download under Intel® Chipset Software Installation Utility, then select the operating system you use
MSI only provide support for Windows XP
EDIT: the download provides drivers for all versions of Windows, so the MSI download will work on W98SE too

HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7

Hi Forum Experts, hope all is well. Hopefully someone will be able to help me with this problem.
My HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7.
I knew there was a problem when I first installed windows, because the windows logo was not centered on the monitor after intial startups. I did adjust it a little by pressing auto/select on my monitor, and that helped with the centering a bit but it is not perfectly centered.
The screen goes blue and this is the message I get when it crashes and restarts.
Problem has been detected and windows has been shut down to prevent damage
to your computer.
attempt to reset the display driver and recover from timeout failed.
if this is the first time you've seen this stop error screen,
restart your computer, if this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select safe mode.
Technical Information
*** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
*** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
Collecting data for crash dump ...
Initializing disk for crash dump ...
Beginning dump of physical memory.
Dumping physical memory to disk:
the message is also slightly of to the left it really reads like this.
Problem has been detected and windows has been shut down to prevent damage
o your computer.
ttempt to reset the display driver and recover from timeout failed.
f this is the first time you've seen this stop error screen,
estart your computer, if this screen appears again, follow
hese steps:
heck to make sure any new hardware or software is properly installed.
f this is a new installation, ask your hardware or software manufacturer
or any windows updates you might need.
f problems continue, disable or remove any newly installed hardware
r software. Disable BIOS memory options such as caching or shadowing.
f you need to use safe mode to remove or disable components, restart
our computer, press F8 to select Advanced Startup Options, and then
elect safe mode.
echnical Information
** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
ollecting data for crash dump ...
nitializing disk for crash dump ...
eginning dump of physical memory.
umping physical memory to disk:
Once windows is fully rebooted all pages, and the display look ok, until it crashes again. I searched for updated drivers on the HP and Windows site but could not find any. The one that is currently installed is called (Generic Pnp Monitor).
Thanks in advance for your expert advice.
Juan.

Thank you for the additional information.
Did you run the Win 7 Upgrade Advisor to assure that your computer is compatible? There may be a problem with compatibility. Also, which version of Win 7 are you running; 32-bit or 64-bit?
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Live 5 keeps missing my installed drivers, GPU, INF drivers issue

Similar Messages

Maybe you are looking for