Live bookmark feed failed to load is greyed and no updates fo latest headlines
'live bookmark feed failed to load 'is greyed and no updates for Latest Headlines.
Most Visited,Getting Started ,Cusromised links and all others OK.
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images permissions.default.images
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
Try to remove the current Latest Headlines feed and create a new feed.<br />
You can visit http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml
Similar Messages
-
I have been uploading pictures of booksd to ABE.com for ages. I am able to view these images on the site. Today, without warning, I am unable to do this. Coincidentally, I note that I can no longer view film footage on the BBC news pages. The Latest Headlines column is also showing "Live Bookmark Feed failed to load". Please help.
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images permissions.default.images
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
Try to remove the current Latest Headlines feed and create a new feed.<br />
You can visit http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml -
Live bookmarks feed failed to load
After upgrading to Firefox5 got this "Live bookmarks feed failed to load"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
EVERY SINGLE RSS FEED displays "Live Bookmark Feed Failed to Load" and then THEY LOAD...
Every single time I add an RSS feed as a live bookmark and view it, the top of the feed list displays a "Live Bookmark Feed Failed to Load" error... Followed by all of the NEWEST entries in that RSS feed.
So why the hell is it saying they failed to load every single time I open a live bookmark when they are actually loading?
I have deleted my live bookmarks and re-added them only to get the same error.
It makes me sad that my favorite web browser is going down the toilet. Won't be more than a month or two before you get taken down by Chrome according to general web trends... Give it a year and if you don't fix all the broken crap in FireFox it will end up as the "NEW IE6" in a year or two...
I love how the top dog in any category of business goes down the toilet as soon as the idiot board and bureaucrats get involved.You can try to create a new Latest Headlines bookmark by visiting this website:
http://en-us.fxfeeds.mozilla.com/en-US/firefox/headlines.xml
http://feeds.bbci.co.uk/news/rss.xml?edition=int -
I need the live bookmark feeds to work, why doesn't it work now in ff8?
Try to remove the current Latest Headlines feed or the feed that gives the problem and create a new feed by visiting the feed location of that feed.
You can visit http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml
* https://support.mozilla.com/kb/How+to+change+the+Latest+Headlines+feed -
When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???
You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)
-
Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002
Following situation. In SCCM we have one Standalone Primray Site Server and two Site Server. The two site server are also SMS Provider. MDT 2012 was installed on all three Servers and the Config Manager Integration was run. When starting the Console
on any of this server and editing an MDT Task Sequence, it occasionally pops up an error "An error occured when loading the task sequence". TaskSequenceProvider.log File throws a lot of errors:
[PID: 2824] Invoking method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load node Use Toolkit Package from XML into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load children steps for node "Applikation" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load children steps for node "" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Failed to load XML for the task sequence into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
[PID: 2824] Done with method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
Tried removing the integration on all SMS Provider Machines and readded them. It does not make a differenence. Does anyone know if MDT supports the use of multiple SMS Providers? When I only use one Provider and deinstall the other two, it works ok.Some more info from the log files:
TaskSequenceProvider.log
[1680680 PID:5228] Initializing provider for namespace root\sms\site_P01 TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[1680680 PID:5228] Initialization of provider for namespace root\sms\site_P01 succeeded TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[PID: 5228] Invoking method SMS_TaskSequence.ExportXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to export task sequence to XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[PID: 5228] Done with method SMS_TaskSequence.ExportXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Setting status complete: status code = 0x80041002; Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[PID: 5228] Invoking method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load node Use Toolkit Package from XML into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load children steps for node "Applikation" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load children steps for node "" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Failed to load XML for the task sequence into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
[PID: 5228] Done with method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
Setting status complete: status code = 0x80041002; Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
SMS Provider logs the following:
CExtUserContext::EnterThread : User=A2\trth1 Sid=0x0105000000000005150000001BB949E9D7F6AADBC3309AA56BAB0000 Caching IWbemContextPtr=0000000005777900 in Process 0x9f8 (2552) SMS Provider 20.06.2012 10:51:47 3008
(0x0BC0)
Context: SMSAppName=SMS Administrator Console SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: MachineName=vswlieca2146.A2.loc SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: UserName=A2\trth1 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: ObjectLockContext=fdf8ab87-cf50-43bd-a48a-d5bb99c8034f SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: ApplicationName=Microsoft.ConfigurationManagement.exe SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: ApplicationVersion=5.0.0.0 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: LocaleID=MS\0x409 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __ProviderArchitecture=32 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __RequiredArchitecture=0 (Bool) SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __ClientPreferredLanguages=en-US,en SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __GroupOperationId=590802 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Context: __WBEM_CLIENT_AUTHENTICATION_LEVEL=6 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CExtUserContext : Set ThreadLocaleID OK to: 1033 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CSspClassManager::PreCallAction, dbname=CM_P01 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
ExecMethodAsync : SMS_ObjectLock::ReleaseLocks SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Requested class =SMS_ObjectLock SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
Requested num keys =0 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CExtProviderClassObject::DoExecuteMethod ReleaseLocks SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CSspSEDO::ReleaseLocks: ********** Releasing SEDO Lock for object SMS_TaskSequencePackage.PackageID="P010013A" for user A2\trth1. ********** SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
CExtUserContext::LeaveThread : Releasing IWbemContextPtr=91715840 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0) -
How o unsubscribe a Live Bookmark feed I no longer want?
I subscribed to a website using Live Bookmarks for notice of audio teachings, which I no longer want to receive. I have the folder with the feeds as part of my BOOKMARKS file. How do I unsubscribe Live Bookmarks? I'm running FF 3.6.16 w/XP
Thanks.Firefox retrieves the items that you see in a RSS live feed list from the server as an XML file. You can remove the Live Feed bookmark to stop using that feed.
See:
* [[Deleting bookmarks]] -
I have deleted the defualt live Bookmark feed for news, what is the RSS?
I just need to know which news feed firefox uses. It was good enough and now I've deleted it and don't know what it is? Oops. Help!
The default ''Latest Headlines'' feed for Firefox (English):
* Feed Location: http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml
* Site Location: http://www.bbc.co.uk/go/rss/int/news/-/news/ -
HTTP.SYS fails to load after ProLiant NIC driver update on Server 2008 R2
Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command
prompt...) DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because
it has no enabled devices associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then
restore the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command prompt...)
DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because it has no enabled devices
associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then restore
the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help... -
ORA-27211: Failed to load Media Management Library after Update to HP DP 6
Hi,
after an Upgrade to Version 6.0 from the Backupsoftware HP Dataprotector i can't run RMAN Backup's anymore, because something is wrong with Linking of the MML.
BS: SLES 8 / Kernel 2.4.21-251-smp
Oracle: 9.2.0.5
I try this RMAN Statement:
RMAN> run
2> {
3> allocate channel 'c1' device type sbt_tape
4> PARMS='SBT_LIBRARY=/opt/omni/lib/libob2oracle8.so';
5> }
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on c1 channel at 10/22/2007 16:04:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
the tracefile (i try RMAN Test with and without PARM Parameter):
Dump file /u01/app/oracle/product/9.2.0/rdbms/log/khv_ora_11745.trc
Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning option
JServer Release 9.2.0.5.0 - Production
ORACLE_HOME = /u01/app/oracle/product/9.2.0
System name: Linux
Node name: dbtheresien3
Release: 2.4.21-251-smp
Version: #1 SMP Thu Sep 23 17:22:54 UTC 2004
Machine: i686
Instance name: KHV
Redo thread mounted by this instance: 1
Oracle process number: 35
Unix process pid: 11745, image: oracle@dbtheresien3 (TNS V1-V3)
*** SESSION ID:(72.47988) 2007-10-22 15:53:24.684
Failed to load SBT library libobk.so
*** 2007-10-22 15:57:35.736
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
*** 2007-10-22 15:58:16.009
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
*** 2007-10-22 16:02:46.904
Failed to load SBT library libobk.so
*** 2007-10-22 16:04:24.761
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
All Infos i found tells me:
- that i doesn't need to restart the Instance of the Database
- i must only remove the old link in $ORACLE_HOME/lin/libobk.so and take a link new link $ORACLE_HOME/lin/libobk.so to the new Backuplibrary in /opt/omni/lib/libob2oracle8.so
But this doesn't work!
Any usefull Hints?
I always try the RMAN Command's:
CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' clear;
Nothing help...
My last Idea ist to reboot the whole Database, but this is a little difficult 8-)hi,
all Systems are 32 Bit (Database Oracle 9.2.0.5 and DP6.0).
What do you mean with "what is Version DP6" ?
HP Dataprotector 6.0 with Patch DPLNX_00013
thx
Thomas -
Network fails upon load, run dhcpcd and it gets an ip and works
Here is my /etc/rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="US/Eastern"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(forcedeth b43 !bcm43xx snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore !snd_pcsp !pcspkr)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="laptop"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network @openntpd netfs hal crond gdm fam alsa)
I was able to manually place the dhcpcd commands in /etc/rc.local. Why is this necessary, though?MarcoRosso wrote:The reason why it is happening is because it is timing out. Thats it for me. Since it says timeout after the status fail message. Unless i am wrong?
This is unlikely because the OP stated that adding dhcpcd eth0 in /etc/rc.local works. If it was timing out that solution would not work. Unless if the OP modified /etc/conf.d/dhcpcd and set a very low timeout limit, I doubt that is the problem here.
aglarond wrote:
I had commented those lines out because the first time I loaded Arch my default gateway wasn't being set, even though I was using dhcp. I commented both of those lines and everything started working. It's possible I messed with something else, though.
-mS
I find that hard to believe. When you comment those lines out no gateway would be being set. You probably did not have ! before routes=(GATEWAY), which would then set an incorrect gateway, if you don't use 192.168.0.1.
@OP
/etc/rc.d/network should be calling dhcpcd to activate the networking on eth0. You haven't modified /etc/conf.d/wireless by some odd chance have you? -
Mail failing to load after 10.8.1 update
My mail client refuses to open after updating last night. The system error is
*** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Could not create ~/Library/Containers/com.apple.mail/Data/Library/_ˇˇˇ/f«/
Any one else having problems?If the printer is connected to the Mac via USB cable and you do not see it in the Default Add Printer view when you try to add it, then it could be the USB cable at fault. So if you have another USB printer cable then try this.
If the Mac still fails to see the HP then open System Information (Applications > Utilties) and in the left column, select the USB entry. The top right pane will show all the USB connections in your Mac. The HP should be visible in this list.
If the printer is not connecting to the Mac via USB but via wireless, then I believe for HP you do have to rely on the HP Software to add a network printer. So maybe check their web site for a later version of this network utility, as the one that came with the printer is probably not compatible with 10.8. -
Retrieving Video files originally loaded before Leopard and FCP updates
I loaded in 10 hours of video onto a LaCie drive and created a FCP project. Since then (over six months ago) my MacBookPro's operating system has been upgraded to Leopard and there has been an upgrade of FCP itself. Trying to open the project now ends in failure. The project file still exists. However, all the video has gone off-line. It is not even visible as files on the LaCie drive even though clearly 100GB of memory are still indicated as being used. Does anyone know a way of retrieving these files? The only option may be to load the video in again.
Sounds like you have a problem with the drive itself. It's not an FCP problem don't think. There are two software programs to try to see if you can recover the files, both are about $100 each though. One is Disk Warrior, and the other is Data Rescue II. DW will rebuild the directory of the drive, and if that fails, then Data Rescue II will copy to another drive the contents of any drive no matter what the condition is as long as it's spinning... Might just recapture if you can reformat that drive.
Jerry -
The list of current news...latest headlines has not changed in the last 3-4 days. at the top of the headlines list is a muted message that says "live bookmark feed failed to load" This problem coincides with my updating to firefox 7.0.1. Is there a suggestion for a resolution? thanks Regie
Try to remove that not working Latest Headlines feed and create a new feed by visiting this URL.
*http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml
Maybe you are looking for
-
I sent my iPod nano 1st generation off for the iPod nano recall ststem. However I have not yet recieved my new iPod nano or an e-mial to confirm arrival or to help me understand where it is. How do i find out where it is? Or if it is ever liable for
-
Why can I no longer install iTunes updates on my computer? I keep getting messages saying it fails, and to do it manually, but then I get popups questioning whether I have the authority to make these changes. And it never updates.
-
YouTube and "Matched third party content".
I have known for a few years that YouTube employs software that can detect videos containing audio from commercial CDs etc. but I didn't know how incredibly efficient it is. I filmed a large theatrical event ten days ago and yesterday uploaded almost
-
Vibration ANE not work at iPhone5+iOS7 environment
Hi, I'm creating an iPhone application using Flash CS6 + Adobe AIR for iOS version 3.9. Have been using (http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/vibration.html) native extension for vibration, but not work at iPhone5+iOS7
-
I don't get it -- I've watched lots of tutorials that show me how to rename my photos, but how do I use automator to render a portion of a timeline into a 'iPod video and iPhone 640x480.m4v' file? Instead of choosing file>export using compressor and