Live bookmarks not tagging read articles after update 13.0.1

After the Update to Firefox version 13.0.1, read articles are no longer tagged with the fav icon of the subscription. This was a very handy feature and it is very frustrating without it.

Finally 14.0.1! ...and nothing. You are really dropping the ball Firefox people. The problem still remains.

Similar Messages

  • Not able to activate after updating to ios6.1 on iphone 4s

    not able to activate after updating to ios6.1 on iphone 4s , it says servers temp unavailable....

    Hey JYTF1975,
    That is never a good time when you are getting error messages when you are trying to restore. If you are getting a bunch of variations of error 0xE and on windows, take a look at the article below for some troubleshooting options to get it back up so you can use your iPhone. 
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    https://support.apple.com/en-us/ts3221
    Take care,
    -Norm G. 

  • Iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

  • My two month old iPod touch 4 will not charge past 98% after updating to 4.3.2

    My two month old iPod touch 4 will not charge past 98% after updating to 4.3.2

    - Are you sure you have a 2G iPod and not a 1G? Yucan can itell the difference here by the shape of the black antenna cover on the back of the iPOd.
    Identifying iPod models
    - What version of iTunes is installed opn the computer?

  • TS4036 My camera roll will not restore from iCloud after updating my iPhone 4 to iOS 6. It shows I have 1.7 gigs of photos stored on camera roll but none are appearing on my phone. Everything else restored from iCloud.

    My camera roll will not restore from iCloud after updating my iPhone 4 to iOS 6. It shows I have 1.7 gigs of photos stored on camera roll but none are appearing on my phone. Everything else restored from iCloud. When I go to iCloud.com my photostream is not there.

    A response I put together from another post. Also going into iTunes and choosing to sync phone to iCloud then back "this computer" sometimes works.
    First thing.. Stop where you are. Don't try to sync, update, hard reset, iCloud... Just stop.
    Check on your phone under 'SETTINGS' 'GENERAL' USAGE'. It should show some value for PHOTOSTREAM. Also, connect to iTunes and you will notice at the bottom of your phones summary page that there is a large amount of 'OTHER' data.
    I used third party software called iExplorer (formerly iPhone explorer). In this program you select 'MEDIA FOLDER', then 'DCIM'. In the various apple folders (IE: 101APPLE) you should be able to preview your photos and copy them to your desktop.
    From there sync them back to your device through iTunes or whatever method you use.
    There is a simpler solution I'm sure, which may involve using iExplorer to delete some .plist files then restart the phone and let it rebuild. I'm going to try it myself AFTER I've finished copying all the photos to my MAC
    Hope this helps.

  • I could not activate the phone after updating software to iOS7.

    Dear Apple Support team.
    Please help to investigate the problem as I could not activate the phone after updating software to iOS7. in the phone the erroe message is "Your iPhone could not be activated because the actiovation server cannot reached. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
    I have try to activate both of way such by WiFi & Cellular activation and connecting with iTunes but still face the problem and could not completed activation the phone.
    How do i activate the phone or have to wait for hour not couple min as you suggested.
    your feedback quickly would be appreciated.
    Thank You
    Kritpas

    There is nothing you can do. That is the Activation Lock that Apple has implemented tout down on theft of their iPhones.
    Most likely the iPhone is stolen.
    It is totally worthless to you.

  • Camera roll not seen in album after updating ios8

    Camera roll not seen in album after updating ios8

    That is intentional. The Camera Roll album is no longer show as a separate album, also My Photo Stream is no longer a separate album.  This Help document explains, where you will see the photos now.
      Get help finding your Photos in iOS 8http://support.apple.com/kb/HT6464
    Have you enabled the "Summarise Photos" option? Then disable it.
    By default, Photos displays a representative subset of your photos when you view by year or by collection.
    To see all your photos, go to Settings > Photos & Camera, then turn off Summarize Photos.
    And did you migrate your photos from iPhoto?  Some photos may still be in the iPhoto Library, that is no longer supported:
    See: Migrating from iPhoto for iOS to Photos on iOS 8

  • Canon Pixma MP 540 does not scan any longer after update mountain lion. printer works normally. Who can help.

    My Canon Pixma MP 540 does not scan any longer after update mountain lion. MP Navigator EX 2.0 starts and immediatley stops and comes with this message:
    Application Specific Information:
    *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSImageCell loadingState]: unrecognized selector sent to instance 0x825c0f0'
    Printer works normally. Who can help.
    Thank you
    PeterPan52

    Hi
    Did you find a solution to this ? I amhaving same problem
    Thanks

  • Can not play any video after update to 4.4.2

    Can not play any video after update to 4.4.2, it says always that i have to reconnect my HDMI Cable, reason HDCP error.

    I have made some tests,
    I can only view Trailers, every thing else dosn't work any more. I could not play any Video via Airplay. I tried to do it fom my IPhone 4, my IPad 1 and from my MacBook Pro 15"/i7 2 GHz/Mac OS10.7.2.
    It always says the same error.
    I reset the divice again and made a restore, but the same error.
    I change the HDMI cable, same error.
    It works fine before, I had 4.4.1 on it. I'm using a Toshiba Beamer MT700.
    Need some help

  • Awesome Bar will not show browsing history after update - I have location bar set to show from history and bookmarks with history being saved for 10 days. How do I fix this?

    I updated firefox last night and now none of my history will show up in my location bar. Everytime I either close the browser window or start a new tab I have to completely type out new addresses.

    I'm the original asker. I uninstalled Firefox, including associated personal data and reinstalled. It now seems to work. I used FEBE to reinstall bookmarks and extensions.

  • Keynote remote will not pair with ipad after update to 10.7.2-bluetooth issue or remote app issue?

    Noticed keynote remote will not pair after updating.  Bluetooth light flashes a couple of times then goes off.  I'm wondering if it's a bluetooth issue or a keynote remote app issue.
    Any suggestions or remedies?
    thanks

    Then again, it may not.
    I've tried all the things recommended in the Apple KB article, and it doesn't work.  Mulderscully is right, in the recent iOS 5 upgrade, Bluetooth is not turned on (at least, its symbol is not visible) from within Keynote even if you turned it on in the Settings menu.  Posts in another thread recommended using another app to establish a Bluetooth connection between the iPad and iPod (I used Touch Rummy), then switching back to Keynote and Keynote Remote.  This does work for me, but it is an awkward workaround.  Shouldn't 'It just work'?

  • IPod Not Recognized by PC After Update 2006-03-23

    This is so frustrating- I was having sync lapses with iTunes, and the PC would "freeze" with the iPod connected to it, before Updater 2006-03-23 was run. After Updater was run, now the PC does not recognize the iPod at all. In fact, Updater 2006-03-23 does not even recognize the iPod. (It always asks to connect my iPod or says "Cannot mount iPod.") Assistance with this would be appreciated.
    iPod Video 30GB   Windows XP  

    Hi Todd,
    Welcome to Apple Discussions
    You may want to look at Knowledge Base Document #61711 on iPod missing in "My Computer" or in iTunes on Windows and Knowledge Base Document #93499 on Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear.
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • My iPhone 5 is not appread in itunes after updating to new itunes software

    Please if any one can help as few days back I updated itunes with new software. after updating, my iPhone 5 is not appearing in tunes.

    Hello Zrc_iPhone,
    I'd recommend taking a look through the following article, as it provides steps that can help get your iPhone back into iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • [SOLVED]root partition read only after update systemd

    After update systemd today, the systemd-remount-fs.service fail to start. Root filesystem is read only I tried add rw to fstab mount option, but the root parition is still  read only. I noticed that util-linux package are installed and udev package is dropped , Does it related to my problem?
    Please advice me.
    Sorry for my bad English.
    Update
    After downgard util-linux package, the system work again 
    Update 2
    UUID in grub.conf and fstab  are inconsistent, Thanks to  tomegun for point out this problem.
    Last edited by aduser (2012-06-08 04:05:59)

    output of systemctl status systemd-remount-fs.service
    systemd-remount-fs.service - Remount Root and Kernel File Systems
    Loaded: loaded (/usr/lib/systemd/system/systemd-remount-fs.service; static)
    Active: failed (Result: exit-code) since Sun, 03 Jun 2012 01:17:42 +0800; 5min ago
    Process: 132 ExecStart=/usr/lib/systemd/systemd-remount-fs (code=exited, status=1/FAILURE)
    CGroup: name=systemd:/system/systemd-remount-fs.service
    fstab
    UUID=55326b3a-eec9-498e-8e20-0a7ddd8daf9a / btrfs rw,compress=lzo,space_cache,autodefrag 0 1
    UUID=54c17991-716b-496e-a89b-4e978f2d92a4 /boot ext2 defaults 0 1
    systemctl
    UNIT LOAD ACTIVE SUB JOB DESCRIPTION
    proc-sys...misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
    sys-devi...d-card1.device loaded active plugged RV630 audio device [Radeon HD 2600 Series]
    sys-devi...d-card0.device loaded active plugged 82801I (ICH9 Family) HD Audio Controller
    sys-devi...et-eth0.device loaded active plugged RTL8111/8168B PCI Express Gigabit Ethernet controller
    sys-devi...dd-sdd1.device loaded active plugged ST3120213A
    sys-devi...dd-sdd2.device loaded active plugged ST3120213A
    sys-devi...ock-sdd.device loaded active plugged ST3120213A
    sys-devi...da-sda1.device loaded active plugged WDC_WD6400AAKS-22A7B0
    sys-devi...da-sda2.device loaded active plugged WDC_WD6400AAKS-22A7B0
    sys-devi...da-sda3.device loaded active plugged WDC_WD6400AAKS-22A7B0
    sys-devi...da-sda5.device loaded active plugged WDC_WD6400AAKS-22A7B0
    sys-devi...ock-sda.device loaded active plugged WDC_WD6400AAKS-22A7B0
    sys-devi...db-sdb1.device loaded active plugged WDC_WD1002FAEX-00Z3A0
    sys-devi...db-sdb2.device loaded active plugged WDC_WD1002FAEX-00Z3A0
    sys-devi...db-sdb3.device loaded active plugged WDC_WD1002FAEX-00Z3A0
    sys-devi...db-sdb4.device loaded active plugged WDC_WD1002FAEX-00Z3A0
    sys-devi...db-sdb5.device loaded active plugged WDC_WD1002FAEX-00Z3A0
    sys-devi...ock-sdb.device loaded active plugged WDC_WD1002FAEX-00Z3A0
    sys-devi...dc-sdc1.device loaded active plugged ST980811AS
    sys-devi...dc-sdc2.device loaded active plugged ST980811AS
    sys-devi...ock-sdc.device loaded active plugged ST980811AS
    sys-devi...y-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
    sys-devi...y-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
    sys-devi...y-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
    sys-devi...y-ttyS0.device loaded active plugged /sys/devices/pnp0/00:07/tty/ttyS0
    -.mount loaded active mounted /
    boot.mount loaded active mounted /boot
    dev-hugepages.mount loaded active mounted Huge Pages File System
    dev-mqueue.mount loaded active mounted POSIX Message Queue File System
    sys-kernel-debug.mount loaded active mounted Debug File System
    tmp.mount loaded active mounted /tmp
    xs-big.mount loaded active mounted /xs/big
    xs-dev-\...pace\x5d.mount loaded active mounted /xs/dev/[workspace]
    xs-dev.mount loaded active mounted /xs/dev
    xs-dl.mount loaded active mounted /xs/dl
    xs-file.mount loaded active mounted /xs/file
    systemd-...d-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
    systemd-...word-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
    console-...daemon.service loaded active running Console Manager
    console-...-start.service loaded failed failed Console System Startup Logging
    dbus.service loaded active running D-Bus System Message Bus
    [email protected] loaded active running dhcpcd on eth0
    gdm.service loaded active running Gnome Display Manager
    [email protected] loaded active running Getty on tty1
    systemd-journald.service loaded active running Journal Service
    systemd-logind.service loaded active running Login Service
    systemd-...unt-fs.service loaded failed failed Remount Root and Kernel File Systems
    systemd-sysctl.service loaded active exited Apply Kernel Variables
    systemd-...-setup.service loaded active exited Recreate Volatile Files and Directories
    systemd-...rigger.service loaded active exited udev Coldplug all Devices
    systemd-udev.service loaded active running udev Kernel Device Manager
    systemd-...nlevel.service loaded failed failed Update UTMP about System Runlevel Changes
    systemd-...ssions.service loaded active exited Permit User Sessions
    systemd-...-setup.service loaded active exited Setup Virtual Console
    dbus.socket loaded active running D-Bus System Message Bus Socket
    systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
    systemd-journald.socket loaded active running Journal Socket
    systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
    systemd-...control.socket loaded active listening udev Control Socket
    systemd-...-kernel.socket loaded active running udev Kernel Socket
    basic.target loaded active active Basic System
    cryptsetup.target loaded active active Encrypted Volumes
    getty.target loaded active active Login Prompts
    graphical.target loaded active active Graphical Interface
    local-fs-pre.target loaded active active Local File Systems (Pre)
    local-fs.target loaded active active Local File Systems
    multi-user.target loaded active active Multi-User
    network.target loaded active active Network
    remote-fs.target loaded active active Remote File Systems
    sockets.target loaded active active Sockets
    sound.target loaded active active Sound Card
    swap.target loaded active active Swap
    sysinit.target loaded active active System Initialization
    systemd-...es-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    JOB = Pending job for the unit.
    74 units listed. Pass --all to see inactive units, too.
    grub2 conf
    menuentry 'Broken' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-true-852c733e-be0d-4375-8668-d7ae049295a9' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 54c17991-716b-496e-a89b-4e978f2d92a4
    else
    search --no-floppy --fs-uuid --set=root 54c17991-716b-496e-a89b-4e978f2d92a4
    fi
    echo 'Loading Linux ck kernel ...'
    linux /vmlinuz-linux-ck root=UUID=852c733e-be0d-4375-8668-d7ae049295a9 ro rootflags=subvol=broken quiet add_efi_memmap elevator=bfq
    echo 'Loading initial ramdisk ...'
    initrd /initramfs-linux-ck.img
    The update packages
    core/btrfs-progs 0.19.20120328-2 2 -> 3
    core/device-mapper 2.02.95-4 4 -> 6
    core/cryptsetup 1.4.2-1 1 -> 2
    core/gpm 1.20.6-7 7 -> 8
    core/lvm2 2.02.95-4 4 -> 6
    extra/libglapi 8.0.3-1 1 -> 2
    extra/libgl 8.0.3-1 1 -> 2
    extra/ati-dri 8.0.3-1 1 -> 2
    extra/bluez 4.99-2 2 -> 6
    extra/consolekit 0.4.6-3 3 -> 4
    extra/gvfs 1.12.3-1 1 -> 2
    extra/gvfs-obexftp 1.12.3-1 1 -> 2
    extra/libatasmart 0.18-1 1 -> 2
    extra/libcanberra 0.28-4 4 -> 5
    extra/libpulse 2.0-1 1 -> 2
    extra/libcanberra-pulse 0.28-4 4 -> 5
    extra/mesa 8.0.3-1 1 -> 2
    extra/pulseaudio 2.0-1 1 -> 2
    extra/xf86-video-ati 6.14.99-0.20120517 0.20120517 -> 1.20120517
    community/libvirt 0.9.12-7 7 -> 8
    community/ttf-ubuntu-font-family 0.80-2 2 -> 3
    multilib/lib32-libglapi 8.0.3-3 3 -> 3.1
    multilib/lib32-libgl 8.0.3-3 3 -> 3.1
    ==> Software upgrade (new version) :
    core/util-linux 2.21.1-2 -> 2.21.2-1
    core/e2fsprogs 1.42.2-2 -> 1.42.3-1
    core/libpipeline 1.2.0-2 -> 1.2.1-1
    core/libsystemd 44-7 -> 184-2
    core/procps-ng 3.3.2-2 -> 3.3.3-1
    core/systemd 44-7 -> 184-2
    core/systemd-sysvcompat 3-1 -> 184-2
    extra/pixman 0.24.4-1 -> 0.26.0-1
    extra/xorg-server-common 1.12.1.902-1 -> 1.12.2-1
    extra/xorg-server 1.12.1.902-1 -> 1.12.2-1
    community/libuser 0.57.1-2 -> 0.57.6-1
    community/os-prober 1.49-3 -> 1.53-1
    community/systemd-arch-units 20120412-6 -> 20120528-3
    repo-ck/linux-ck-corex 3.3.7-1 -> 3.4-1
    repo-ck/linux-ck-corex-headers 3.3.7-1 -> 3.4-1
    ==> New package :
    core/systemd-tools 184-2 (required by systemd)
    Does the systemd not support btrfs subvolume as root partition??
    Last edited by aduser (2012-06-02 17:45:39)

  • How do I find my bookmarks and tagged pages? I update to newest Firefox and now they are gone- it looks like a completely new Firefox. What do I do?

    I update to newest Firefox and now they are gone- it looks like a completely new Firefox. What do I do? There is nothing in my toolbar, or history, or bookmarks. I have also none of my old slides or whatever they are called when I open a new tab. HELP!

    You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    *Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

Maybe you are looking for

  • Can nolonger watch YouTube movies with my new Safari 2.0.4

    I recently went from an eMac with 10.3.9 - Jaguar, to an iMac with 10.4.8 Tiger. My Safari is 2.0.4. While I was able to watch all YouTube movies, I can nolonger do so. The movie stops about 5 seconds after watching a movie. It behaves as though I al

  • Ipod Touch 5 stuck in recovery mode after trying IOS 7.1.1 Update

    I was having fun with my Ipod as usual. I see a new update pop up. I plug the ipod to charge it but then minutes later the Itunes Logo and Cord appear and it's not good. I haven't backed it up lately due to Computer Problems and I have been taking lo

  • Searching multipul fields in a database

    hi there, im working on a scouting website, and i have a database that has details of camps all over the northeast. all this data is housed on one table. each row houses the info for one camp, and each column represents an attribute. there are about

  • ITunes 10.5 keeps failing to install - missing components

    Hi, I'm really hoping someone can help me - I went to upgrade to 10.5 (64-bit). Initially I was told that it failed to install properly and I would have to manually install the different components (yeah I'm a tech-moron), which I tried to. But they

  • Renaming a large number of files

    hi there, can someone please recommend a fair tool to rename files and stuff, probably a mac prof tool which fits into finder? thank you, harpo