Live Cache Installation Error
Hi,
While trying to install Livecache, i am getting the error as bleow.
INFO 2007-11-28 07:54:10 [iaxxejsexp.cpp:106]
EJS_Installer::invokeModuleCall()
Working directory changed to /tmp/sapinst_instdir/NW04S/STANDALONE/LC/SERVER.
ERROR 2007-11-28 07:54:10 [iaxxinscbk.cpp:282]
abortInstallation
CJS-00030 Assertion failed: SdbSoftware.getExistingDbmcli(): IndepProgPath /sapdb/programs exists, but /sapdb/programs/bin/dbmcli is missing.
ERROR 2007-11-28 07:54:10
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-11-28 07:54:11
FCO-00011 The step CheckExistingServerSoftware with step key |LIVECACHESERVER|ind|ind|ind|ind|0|0|Sdb_ServerSoftware_Dialogs|ind|ind|ind|ind|1|0|CheckExistingServerSoftware was executed with status ERROR .
Please reply.
Thanks in advance,
Sandeep.
Hello Sandeep,
-> You got error:
"CJS-00030 Assertion failed: SdbSoftware.getExistingDbmcli(): IndepProgPath /sapdb/programs exists, but /sapdb/programs/bin/dbmcli is missing."
It's looking that the database software was installed on the server, but it was uninstalled incorrectly.
Did you delete the database software manually?
Do you have the database software in /sapdb on the server?
Was it installed before?
Please review the SAP note < !! > ::
599129 Uninstalling MaxDB/SAP DB software using SDBUNINST
Please update the thread with output of the following commands::
ls -l /usr/spool/sql/ini
ls -l /sapdb/programs/bin
uname -a
ls -l /etc/opt/sdb
If you have already removed database software manually & the /sapdb directory is empty,
you can not use the note 599129 any more.
Please check the existence of the file /etc/opt/sdb & subdirectories of the directory /usr/spool/sql/ini
where you still have the register information of the database installation.
If you have already removed database software manually & the /sapdb directory is empty,
please rename the file /etc/opt/sdb to /etc/opt/sdb.old < if you have > &&
subdirectories in /usr/spool/sql/* to /usr/spool/sql/* .old and rerun the installation again.
-> If you have further questions/problems with liveCache, please post the question at MAXDB/liveCache forum SAP MaxDB
Thank you and best regards, Natalia Khlopina
Similar Messages
-
Hi,
Our Live cache log backup runs to tape, sometimes this may fail and our log area starts increasing, when we try to take a log backup uisng DBMGUI or DBMCLI we get below error.
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
Can you please help how to resolve this ?, since it is something critical for us during our business close end,
Thanks,
Chetan> Our Live cache log backup runs to tape, sometimes this may fail and our log area starts increasing, when we try to take a log backup uisng DBMGUI or DBMCLI we get below error.
Hmm... that is usually not the way it should work - I assume you're employing a third party backup tool here?
If not, than you definitively shouldn't create the log backup directly to tape.
Instead you should use the AUTOLOG backup to the filesystem and afterwards archive the backups to the tape.
> ERR
> -24988,ERR_SQL: SQL error
> -104,DBM command impossible at this time
Well, it means what it says: for some reason (e.g. there is already a backup running) you cannot start the backup right now.
For more detailed answers we need to see the log files of the database.
> Can you please help how to resolve this ?, since it is something critical for us during our business close end,
Hmm... what has your liveCache to do with your business (month?) end closing??
Anyhow, if something is important1, critical2 or urgent3 then the forum might not be the place to go.
In such cases always open a support message - there you've got guaranteed response times.
regards,
Lars
please don't blame me for adding the numbers to the three bad words above - this was the only way to get around the awkward content filtering of this forum
Edited by: Lars Breddemann on Sep 4, 2009 9:47 AM -
Hi,
Iam restoring LC backup from Production to QA system from dbmgui. during backup restore initial phase 0KB of 0 pages transferred iam getting error "-24988 SQL error[db_activate....]; -902,I/O error". Restore did not satrted.
When i went to /sapdb/data/wrk the file xserver_server.prt
it shows the error 26003 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.194.194.67.'
26003 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.216.51.138.'
2010-09-30 16:07:20 26003 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.216.51.138.'
2010-09-30 16:15:13 26003 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.216.51.138.'
2010-09-30 20:19:54 24095 ERR 11926 XSERVER Receive packet, Ref:9 - socket recv error (238:Connection timed out
2010-09-30 20:48:57 26049 ERR 11926 XSERVER Receive packet, Ref:9 - socket recv error (238:Connection timed out
2010-09-30 23:00:58 26003 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.194.194.67.'
2010-09-30 23:00:59 26003 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.194.194.67.'
2010-09-30 23:01:20 26003 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.194.194.67.'
I tried many options but no luck.If you have faced this issue then let me know.
- ShaikHello Shaik,
-> What are the versions of the liveCache instance of the PROD and QA systems?
-> What are the OS of the target and source liveCache servers?
-> What is the version of the DBMGUI?
-> u201Cgetting error "-24988 SQL errorhttp://db_activate....; -902,I/O error"
Please check/post the errors in dbm.prt and knldiag < or KnlMsg > messages after dbm command db_activate run.
Please post the medium definition you used for restore.
In general about u201C-902: I/O erroru201D database error see the explanation and User Response in the MAXDB library at
http://maxdb.sap.com/doc/7_7/49/2cd234d67148808c054633343e4c20/content.htm
Thank you and best regards, Natalia Khlopina -
Live Cache Failed (DBM error)
Hi,
I am getting following error while starting live cache(LC10)
"Error DBMCLI_COMMAND_EXECUTE_ERROR when starting liveCache LC1 on server system"
Server: system
Users: SAPUSER
Logical Command: DBMRFC
Parameter: exec_lcinit restart
Name and Server : LC1 - system
DBMRFC Function : DBM_EXECUTE
Command : exec_lcinit restart
Error : DBM Error
Return Code : -24964
Error Message : ERR_EXECUTE: error in program execution#
0,sap\lcinit LC1 restart -uDBM , -uDBA , -uSQL ,
liveCache LC1 (restart)
The liveCache state is OFFLINE
DBMServer 7.6.00 Build 029-123-130-265
starting LC1 into ONLINE
ERROR : restart not possible [please check knldiag!!]
ERROR : liveCache LC1 not started (see "d:\sapdb\data\wrk\LC1\lcinit.log")
In Transaction DB59 i tried connection test "Connect. test with "native SQL" ( LCA ) unsuccesful"
how to restart Live Cache again? what will be the problem?
regards
ThennarasuHello,
what's wrong with the hint you already got?
> ERROR : restart not possible [please check knldiag!!]
Check the knldiag and then we might be able to do something about this issue.
regards,
Lars -
Hi Gurus,
I had tested IDES system and it doesnt have live cache , can i use the system for further.Please conform me as i requested for it that it doesnt work.
Thanks in advance
regards,
KumarKumar.
I am only reinstating what has already been said. You cannot use your system without a Live cache installation. Please get in touch with your BASIS administrator to get it configured and activated.
For further read use:
SAP liveCache technology
Abhi -
Error during Live Cache Server Installation on SCM 4.1 system
Hi All,
I have an SCM 4.1 ABAP system running on MSSQL2005 and Win2003 server.I would like to install Live Cache Server on the same Server.Livecache client was installed as part of SCM 4.1 installation.
I have installed MAXDB software and now when im trying to install Live Cache Server Instance i get the below error
Im performing the installation with user root and it is an Administrator.
WARNING 2011-12-09 11:01:25
Execution of the command "change 'user' '/install'" finished with return code 1. Output: Install mode does not apply to a Terminal server configured for remote administration.
Installation start: Friday, 09 December 2011, 11:01:23; installation directory: G:\SCM_4.1_Media\Media_Live_Cache\New_Media\51031447_2\CD_SAP_SCM_4.1_liveCache_64bit\SAPINST\NT\AMD64; product to be installed: SAP SCM 4.1> Additional Services> Install a liveCache Server instance
Transaction begin ********************************************************
WARNING 2011-12-09 11:02:33
Error 3 (The system cannot find the path specified.
) in execution of a 'CreateProcess' function, line (265), with parameter (G:\SCM_4.1_Media\Media_Live_Cache\New_Media\51031447_2\CD_SAP_SCM_4.1_liveCache_64bit\NT\AMD64\SDBUPD.EXE -l).
Transaction end **********************************************************
WARNING 2011-12-09 11:02:34
The step Fill_sapdb_db_instance_context with step key LIVECACHESERVER|ind|ind|ind|ind|ind|0|LC_SERVER_INSTALL|ind|ind|ind|ind|ind|0|Fill_sapdb_db_instance_context was executed with status ERROR.
Has anyone seen this error before ? Any pointers would be helpful.
Regards,
Ershad Ahmed.Subprocess starts at 20111209154957
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX db_enum
Execute Session Command : exit
> Subprocess stops at 20111209154957
OK
> Subprocess starts at 20111209155027
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX db_enum
Execute Session Command : exit
> Subprocess stops at 20111209155027
OK
> Subprocess starts at 20111209155221
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX db_enum
Execute Session Command : exit
> Subprocess stops at 20111209155221
OK
> Subprocess starts at 20111209155323
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX inst_enum
Execute Session Command : exit
> Subprocess stops at 20111209155324
OK
7.5.00.31 f:\sapdb\liv\db
7.6.06.10 f\sapdb\sdb\7606
7.6.06.10 C:\Program Files\sdb\7606
> Subprocess starts at 20111209155324
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX inst_enum
Execute Session Command : exit
> Subprocess stops at 20111209155324
OK
7.5.00.31 f:\sapdb\liv\db
7.6.06.10 f\sapdb\sdb\7606
7.6.06.10 C:\Program Files\sdb\7606
> Subprocess starts at 20111209161349
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX inst_enum
Execute Session Command : exit
> Subprocess stops at 20111209161349
OK
7.5.00.31 f:\sapdb\liv\db
7.6.06.10 f\sapdb\sdb\7606
7.6.06.10 C:\Program Files\sdb\7606
Regards,
Ershad Ahmed. -
Live Cache 7.5. Installation SCM4.1 ERROR MDB-070020
Hi,
we`re trying to install live cache 7.5.00.21 on SCM 4.1.
(Maxdb version of normal db is 7.6.05.09).
We had an other version installed before, which we deleted because of other errors.
Now we`re getting the following error message - any idea?
WARNING 2009-01-16 11:19:37
Execution of the command "/special1/TAD_NEU/lcinst/UNIX/HPIA64/SDBINST '-indep_prog' '/sapdb/programs' '-indep_data' '/sapdb/data' '-depend' '/sapdb/LCA/db'
'-profile' 'APO LiveCache' '-o' '1100' '-g' '1100' '-b'" finished with return code 1. Output:
starting preparing phase of package Base 7.5.00.21 64 bit
cannot downgrade package
skipping package
starting preparing phase of package Server Utilities 7.5.00.21 64 bit
cannot downgrade package
skipping package
starting preparing phase of package Database Kernel 7.5.00.21 64 bit
cannot do update check - test file "/sapdb/LCA/db/pgm/kernel" not found
installation exited abnormally at Fr, Jan 16, 2009 at 11:19:37
ERROR 2009-01-16 11:19:37
MDB-070020 The database installer reported an error. Some database applications are probably still running.
Check the log file sdbinst.log.Michael Schneider wrote:>
> Hi,
>
> we`re trying to install live cache 7.5.00.21 on SCM 4.1.
> (Maxdb version of normal db is 7.6.05.09).
>
> We had an other version installed before, which we deleted because of other errors.
>
> Now we`re getting the following error message - any idea?
Sure - how did you uninstall the former installation?
rm -f /sapdb/<DBSID> ??
To correctly uninstall a MaxDB/liveCache you'll always have to use the SDBUNINST tool.
Since there seems to be another installation on the same server, it's now a bit complicated to clean up the registration mess... You should open a support message for that. Then we'll see what we can do here.
regards,
Lars -
Dear All
I have a SCM 7.0 application with Live Cache installed. The same was working fine till few days back.
However, now, when I am trying to start Live Cache using LC10, I am receiving an error as per the lcinit.log.
START *****************************
liveCache SCM (restart)
01.07.2010
11:09
Installation path is D:\sapdb\SCM\db
Operating system is Windows Server 2003 family
The liveCache state is OFFLINE
DBMServer 7.7.04 Build 029-123-196-543
Starting SCM into ADMIN
Starting SCM into ONLINE
ERR
-24988,ERR_SQL: SQL error
-902,I/O error
3,Database state: OFFLINE
Internal errorcode, Error code 9050 "disk_not_accessible"
20017,RestartFilesystem failed with 'I/O error'
ERROR : Restart not possible (please check KnlMsg)
ERROR : liveCache SCM not started
01.07.2010
11:09
END ******************************
Any suggestions
Regards
LokeshHI there,
why don't you take a closer look to what is in the message?
> Internal errorcode, Error code 9050 "disk_not_accessible"
> 20017,RestartFilesystem failed with 'I/O error'
> ERROR : Restart not possible (please check KnlMsg)
There is a problem with the liveCache disks.
This problem prevents that the liveCache can be started.
For more information you should look into the KNLMSG file.
Why don't you just do that?
The file will tell you what file is the problem and what kind of problem there is with the file.
regards,
Lars -
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
DBM Error return code -11 in LC10 Administration in SCM System Live Cache
Hello,
We have installed SCM 4.1 on Solaris on one box and LC 7.5 on another solaris box.
For kernel upgrade, we shut down Live Cache using LC10>administration on SCM server. After kernel patch, other patches for ABAP stack, we upgraded LC to SP11 build 35.
Since then, we get following error in LC10.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Name and Server : LCA - gva1073
DBMRFC Function : DBM_EXECUTE
Command : dbm_version
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Also, in DB59, when we try to check connection, we get following error -
General Connection Data
Connection Name....: LCA
Database Name......: LCA
Database Server....: gva1073
tp Profiles........: no_longer_used
DBM User...........: CONTROL
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: gva1075_SCD_03 (
SunOS )
1. Connect. test with "dbmcli db_state"
Successful
2. Connect. test with command mode "dbmrfc db_state"
Unsuccessful
dbm_system_error
Name and Server : LCA - gva1073
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
3. Connect. test with session mode "dbmrfc db_state"
Unsuccessful
dbm_system_error
Name and Server : LCA - gva1073
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
4. Connect. test with "native SQL" ( LCA )
Successful
++++++++++++++++++++++++++++++++++++++++++++++++++++
Can anybody please help?
Thanks and regards,
VaibhavHello Vaibhav,
while using transaction LC10, the error 11 "tp error: Terminating. [nlsui0.c ...]" occurs. The user authorization with tp fails and the application server cannot connect to the liveCache.
I assumed, that it's due to a library version mismatch, tp cannot use the liveCahe UNICODE libraries.
Please check, that the tp call at the command line works properly. And a dbmcli call in the transaction SM49 with the tp options
(dbmcli ::
-d <LC-SID> -n <LC-servername> -tpp <profile> -tpi <system-SID>
-tpc <connection - LCA/LDA> dbm_version)
works also properly.
I recommend you to update the liveCache client software on the Application server.
If you've got access to OSS/Service Market Place, then please take a look at note
649814 how to update the liveCache client software on the application server.
< Please also review the SAP notes 847736 & 831108 >
Before the liveCache client version will be upgraded on the application
server you can use the workaround by switching off the central authorization for the liveCache LCA/LDA connections:
In transaction LC10, choose Integration and deactivate the option Central authorization, then save.
If you are the official SAP customer, I recommend you to create the ticket to SAP on 'BC-DB-LVC' queue.
Thank you and best regards, Natalia Khlopina -
Error saving transport requisitio​n to live cache
Hi Gurus,
while location heuristic running getting in bottom line message like error saving transport requisition to live cache.kindly suggest me soon.
regards,
babuDear Rajendra,
The error message seems to occur during the deletion of the purchase
requisitions when running the heuristics. The error /SAPAPO/SNP028
occurs when SNP tries to access the order data whose master data has
been changed. So, when the order's master data has changed and no
longer represent the existing one, you get this error message.
Please run the report
/SAPAPO/RLCDELETE before running the heuristics job manually to delete the inconsistent data.
So here the product 20508050 @ Mc5000-ZA59 the existing purchase
requisitions might not have anymaster data like Means of transport or PDS. Can you please delete
these inconsistent orders and run the heuristics again to check if
the orders are still created with inconsistent means of transport.
Also run consistenct reports /SAPAPO/TS_LCM_CONS_CHECK and OM17 and correct if any inconsistency is present.
BR,
Thushitha V. -
Live cache COM routine ended with own error code 38
Hi Experts,
the process chain got failed and it is showing the error as error 38.when we are doing the analysis the error itself coming in the extractin level and it is showing as errors in the source system and not more than that. Please gimme some solution how to solve it.Hello,
This is the object not found error for /SAPAPO/OM_PEGAREA
These error codes are generated if you try to access or manipulate an
object that cannot be found in the live cache (any more).
Normally this means that there is no object with the key (GUID) provided
by the ABAP.
Please execute the transaction /SAPAPO/OM17 inorder to resolve the
inconsistencies regarding missing pegkeys.
Best Regards
Barry -
Live Cache x_server throwing error when starting
Hi,
When i'm trying to start the Live Cache X_server , It is giving the below error:
12798 NISERVER NI support started.
WNG 12453 NISSLSRV NISSL Init: SSL: Could not locate licence file
12902 XSERVER started, 'X64/LINUX 7.6.00 Build 018-123-119-055'
Os: IBM AIX 5.3
SCM 5.0
Please anybody have the solution, please share.ok, fixed it.
Putting the dtd on a machine that it can see solved it... would be nice if the doc mentioned that your test machine (the one that it warns is insecure as everything is installed as root etc etc) needs to have outgoing internet access...
Ho hum.
Oddly, requesting that dtd from sun gives a 500 - using:
<?xml version="1.0" encoding="UTF-8"?>
<!--
Copyright 2004 Sun Microsystems, Inc. All rights reserved.
SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
-->
<!DOCTYPE sun-web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Application Server 8.1 Servlet 2.4//EN" "http://cherry.kent.ac.uk/sun-web-app_2_3-1.dtd">
<sun-web-app>
<context-root>/httpbind</context-root>
</sun-web-app>where sun-web-app_2_3-1.dtd if the dtd available at http://www.sun.com/software/dtd/appserver/sun-web-app_2_3-1.dtd
hopefully this will give someone else a hint :) -
Live cache error while correctingg inconsisitency in Resource
Dear Expert
While correcting inconsistency in live cache inconsistency is not getting corrected .
Error is Bucket vector does not exist in Live cache for resource WR201_1000_008
we are using Block planning in PPDS . I have checked SAPAPO/RST02 But resource is there in live cache it status is green
I am attaching error file
Thanks & Regards
VirenderHi Virender,
The problem is a SCM issue, so I already triggered "alert moderator" to forward SCM forum.
Best regards,
James -
Live Cache error with message number /SAPAPO/OM028
Hi Experts,
When I run RLCDEL program for deletion of obsolete SNP orders in the back ground , system shows livecache error alert with message number /SAPAPO/OM028 in the deletion job log. The details of message is "invalid order" or ABAP programming error. Live cache consistency checks are not resolving issue. Product release is 5.1 with SP08. Please suggest a resolution
Regards,
RaghavHi Raghav,
The sap notes 642503 & 973244 will fix your issue but they are for
versions 4.0 and 5.0 respectively.
You can write to SAP by creating a OSS message to update these
two message for version 5.1
This will resolve your issue
Please confirm
Regards
R. Senthil Mareeswaran.
Maybe you are looking for
-
HT1414 how can i find the dates of the latest backup for iphone and ipad
i cannot seem to find the dates of last backup for my iphone or ipad.. what buttons will lead me to the answer
-
Hi,as the title suggests yesterday I downloaded update 4.2 to my imac and when it finished downloading I got the message,"itunes detects an iphone in recovery mode.You must restore the iphone to be compatible with itunes." So I clicked on the restore
-
How do i Hyperlink to a web page from a java application?
How do i Hyperlink to a web page from a java application using internet explorer as my default web browser?
-
Putting two photos together in iPhoto
For an online project, I need to take two photos and put them together with a line down the middle to separate them. It's two people and we have two separate photos but we want to use them in one photo space, if that makes sense. How do I create one
-
new Ipad 3 connects to wifi stays connected for about 3 to 15 minutes and then looses connection, constantly happens. other products connect just fine even both iphones on wifi stay connected why cant apple fix this???? for me to take the device to t