Live Cache Monitoring. DBM_CONNECT DBM Error
Hi Gurus,
I have Installed TM7.0 system which is on NW7.0 with EHP1 on windows server2003 and Oracle DB. i have also installed SCM optimizer.
after i installed Live Cache, in transaction LC10 i have maintained the data in integration tab. When i click the 'liveCache : monitoring' tab i get the following error.
Name and Server : TM7 - CTSGVCSAPBL07
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -2
Error Message : ERR_USRFAIL: User authorization failed#
This implies that the connectivity to the MaxDB database is giving authoization error.
The user with which i have logged in(SAP logon) has the following roles -
SAP_LCA_ALL
SAP_BC_LVC_SUPERUSER
Thanks in advance
Sriram
Hi,
please take a look at SAP note 990602, specifically point 11; use transaction DB59 to check the connection to your liveCache instance.
From the error message you receive, it seems likely that the integration data (user/password combination) for your liveCache instance is incorrect.
Regards,
Roland
Similar Messages
-
Hello
How i can monitor live cache & pefformance ?
regards
sachinHi,
Please check below link.
http://help.sap.com/saphelp_scm41/helpdata/en/36/0609e9bac98b4098f65c2dc6cb36fc/frameset.htm
Hope this helps.
Thanks,
Pushkar -
Live Cache config prob!!!!!!
Dear All,
I have just installed IDES of SCM 5.0 and scheduled and released the default jobs from sm36. But from sm37 I can see that the jobs are getting cancelled .
1)" Connection to LiveCache Failed " .
2)" LiveCache Lock Server not Accessible " .
I have installed ABAP + JAVA and logged in client 001.
Please advice ........
Regards,
SourenHi Natalia,
Thanks for the reply.
Ours is win2k3 32 bit system where we have installed :
(1) Oracle 10.2 &
(2) SCM 5.0 server (Central System Installation).
During Installation, SAPinst asked for Live cache related details (eg, Live Cache ID - we have given LC1, Control user's Pwd etc) along with the installation DVD for the same - where we have given the DVD 51032259_11 (NW 2004s SR2 liveCache 7.6.0 Windows Server on IA32 32bit).
The installation completed successfully. Our SCM system id is SR3.
**Does this mean that Live Cache Server got installed ??
After the above installation, we have referred the "Installation - SAP liveCache Technology on Win - NW 7.0 SR2" and tried to do the post installation steps (Assuming that Live cache got installed )
We created the RFC user with all the authorizations as described in the SAP note for the same.
During the post installation step :
dbmcli d <SID> -u <controluser>,<password> db_offline,
we got the following error:
ERROR! Connection failed to node <LOCAL> for database <SID>:
Database instance not found.
We tried with both SR3 & LC1 as SID but the result is same.
Further, we tried the next post installation step using LC10.
After Integrating LCA,LDA & LEA, when we tried to "monitor" the Live Cache (by clicking the Live Cache: Monitoring button), we got the following error:
DBMRFC Function : DBM_CONNECT
Error :DBM Error
Return Code : -4
Error Message database instance not found
How should we proceed now??
Thanks & Regards,
Souren -
Installing Live Cache Server on SCM 4.1 system
Hi All,
I have installed an SCM 4.1 Abap + Java System and Live cache client was installed during SCM 4.1 installation.
I would like to install Live cache server and i have problems with it.
I have downloaded the following installation guide
SAP liveCache 7.5.0 For SAP SCM Server 4.1
Document Version 1.02 u2013 April 8th, 2005
Guide tells us to use installation master CD for installating Live cache Server but note 708118 tells us to use the CD 51031447
04 Nov 05 Windows AMD64: Start Installation from liveCache CD
Start the installation of the liveCache server or client from the liveCache
CD (number 51031447) and not from the installation master CD (number
51031443)
Upon checking the cd 51031447 i see SDBINST.exe and upon clicking it i get the following screen
Installation of SAP LiveCache Software
existing profiles
0: APO Livecache
1: Runtime for SAP AS
2: DB Analyzer
3: JDBC
4: Server
5: Loader
6: ODBC
7: All
8: None
Please enter profile id :
I select profile 0 and it comes back with another user input option
Im searching for a document which gives me the procedure for installing Live cache using SBDINST.exe
Regards,
Ershad Ahmed.Hi All,
I went ahead with Option 0 and it asked me for Kernel file and i provided the files.
I checked logs in /sapdb/wrk directory and i see that Installation of SAP livecache finished successfully.
From LC10 i gave database connection name (LCA) and clicked on live cache monitoring and it comes back with an error
Name and Server : LCA - XXXXXXX (XXXXX = Server Name)
DBMRFC Function: DBM_EXECUTE
Command: dbm_version
Error: DBM Error
Return Code : -4
Errror Message: database instance not found.
Application Server: XXXXXX ( Windows NT )
1. Connect. test with "dbmcli db_state"
Error! Connection failed to node XXXXXXX for database LCA: database instance not found
External program terminated with exit code 2
2. Connect. test with command mode "dbmrfc db_state"
Name and Server : LCA - XXXXXXX
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -4
Error Message : database instance not found
3. Connect. test with session mode "dbmrfc db_state"
Name and Server : LCA - XXXXXXXX
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -4
Error Message : database instance not found
4. Connect. test with "native SQL" ( LCA )
For detailed information, see the developer trace for work process: 1
From the OS level i gave command dbmcli db_enum and i get OK as reply.
Can someone please let me know how to resolve this issue.
Regards,
Ershad Ahmed. -
Hi having a problem upgrading SCM 4.1 APO Live Cache
Hi I am new to SCM and I came into a project that was already started, I am doing a SUM upgrade and its at the upgrade of Live Cache I need to run the report /SAPAPO/OM_LC_UPGRADE_70 and perform all steps in section A. when I try to run the report it comes back "No shared library for the database with ID LCA" I checked LC10 and saw in the Settings that the database is still pointing back to the source system it was copied from. Like I said I walked into this in the middle the they are upgrading from SCM 4.1 to 7.0EHP3 on SQL 2012 and Windows 2012 so they built the 2012 Vm installed the Central services and when they installed the DB it was an attach / detach method and I installed the DB instance. Question should any of the file directories have come with the attach db there are no sapdb in the directories do I just install the live cache and that installs the maxdb and makes the directories /sapdb/ because I see them in the source system? I tried installing the live cache that came with the original system but it had errors.
Hi All,
I went ahead with Option 0 and it asked me for Kernel file and i provided the files.
I checked logs in /sapdb/wrk directory and i see that Installation of SAP livecache finished successfully.
From LC10 i gave database connection name (LCA) and clicked on live cache monitoring and it comes back with an error
Name and Server : LCA - XXXXXXX (XXXXX = Server Name)
DBMRFC Function: DBM_EXECUTE
Command: dbm_version
Error: DBM Error
Return Code : -4
Errror Message: database instance not found.
Application Server: XXXXXX ( Windows NT )
1. Connect. test with "dbmcli db_state"
Error! Connection failed to node XXXXXXX for database LCA: database instance not found
External program terminated with exit code 2
2. Connect. test with command mode "dbmrfc db_state"
Name and Server : LCA - XXXXXXX
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -4
Error Message : database instance not found
3. Connect. test with session mode "dbmrfc db_state"
Name and Server : LCA - XXXXXXXX
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -4
Error Message : database instance not found
4. Connect. test with "native SQL" ( LCA )
For detailed information, see the developer trace for work process: 1
From the OS level i gave command dbmcli db_enum and i get OK as reply.
Can someone please let me know how to resolve this issue.
Regards,
Ershad Ahmed. -
Hi,
I've just completed an SCM 2007 Installation alongwith the live cache.
However, when I try to login to the LC using the dbmcli command (user control/superdba & the pwds. set during installation), it gives the foll. error:
-24950,ERR_USRFAIL: User Authorization failed.
Also, I'm not able to use LC10-->Live Cache Monitoring
Pls help, since it's extremely urgent.
Thanks a lot,
Saba.Hello Saba,
-> For SAP liveCache documentation in English see the SAP note 767598.
-> In general, the error could be due the wrong password of the dbm user.
For example, I created the database instance NLK with the control user and
control password. If I will try to connect to the database with wrong password
I will get this error ::
dbmcli -d NLK -u control,test
Error! Connection failed to node (local) for database NLK:
-24950,ERR_USRFAIL: User authorization failed
-> You are running SCM 2007 < SCM 5.1 > system, therefore you are SAP customer.
Please create the SAP ticket concerning this issue => we could logon via OSS and check the status of your system.
Please set 'high' priority of the ticket, if it's extremely urgent.
If it's the DEMO or PROD system you could escalate the message to 'VH'.
Thank you and best regards, Natalia Khlopina -
I got the error message of "Live chage failed" at run time. Even In the Live cache monitor also I am getting the status "Live cache Inactive". What is the reason for this error and how to rectify it.
Hi veeranan muthuppandi
As you mentioned, liveCache seems inactive. (liveCache is down)
So please start up livecache from LC10.
Best Regards
Keiji -
hai every one,
We have installed scm 5.0 box, We have an issue in configuration of live cache, we have followed the SAP live cache post installation steps till config of LCA ,LDA and LEA.Then we click on the live cache monitoring for LCA,we got a window Error DBMCLI_COMMAND_EXECUTE_ERROR when starting and error code is 29464.
With regards
shivaPlease see if this OSS Note helps
Note 147927 - LC 7.1.3 Build > 5: DBMCLI_COMMAND_EXECUTE_ERROR -
Hi Experts / Gurus,
Can you please help me in this regard.
I have installed SCM 2007 on my Laptop ( Windows 2003 - x64 Bit Version). Installtion went on well. i am able logon successfuuly. when i am trying to test the connection DB59 - Application Server - > Live Cache, i am facing error.
i am pasting the error logfile below
connect test with DBMCLI DB_STATE Successful
connect test with COMMAND MODE "DBMRFC DB_STATE Successful
connect test with SESSION MODE "DBMRFC DB_STATE Successful
connect test with native SQL(LCA) Since Offline Can not determine
when i check the integration test, it says, offline mode, there is Diamond symbol shown..
I am unable to do any transaction which requires Live Cache.
Please Advice.
Thanks in Advance
Venkata Ramjeevan PMP, CSCP> Should i do anything with Max DB? Currently i am using Max DB 7.7 Version with Live cache 7.7... do i need to start Max DB separately. If yes, please guide me, how to do that..
Why should you do anything with MaxDB?
You got a problem with your liveCache instance - that's it.
This has nothing to do with any other MaxDB instance here.
And, just for the case you got confused:
If you use a liveCache - there is just one software running.
It's the MaxDB kernel.
The only part that makes a liveCache instance different from a standard MaxDB instance is:
liveCache comes with a bunch of build-in (yes, into the MaxDB kernel) C++-routines, that can be called by SCM.
These C++-routines do all the work and run in the MaxDB Kernel process.
If you cannot get it running, you may make use of the maintenance fee your company pays and open a support message ...
regards,
Lars -
Hi Guys,
I have some problem in live cache in APO , i was posting in APO forum could not able to find clear findings
so i am diverting my questions here in this forum
basically the APO and R/3 system are running smoothly with no problem in CIF
but accidently we done the below steps
Entered into transaction LC-10
Click Live cache Monitoring
click the folder - Administration
click Operating under - configuration
There are two Icon bar - start LiveCache and stop LiveCache
First i clicked stop and then after few minutes i click start
After some time i try to open the Product view in APO, the system says Live cache not available
can some one help me in this regard
Thanks
RajHi,
Here is the log you asked me
veCache LC1 (restart)
Mon 10/15/2007
03:00 AM
installation path = e:\sapdb\lc1\db
OK
OK
DBMServer 7.6.03 Build 008-123-159-187
starting LC1 into ONLINE
OK
Creating liveCache application procedures
OK
0,OK: everything works fine
0,""e:\sapdb\lc1\db\bin\x_python" "e:\sapdb\lc1\db\env\lapps.py" -R "e:\sapdb\lc1\db" -d LC1 -u SUPERDBA,*"
Installing APPS
Droping Procedures
LC1ADM
SAPTS
SAPLCK
SAPAPO
SAPATP
SAPREP
SAPSIM
SAPRPM
DBPINSTALL
Creating Procedures
LC1ADM
dbpinstall
FORCE_CHECKPOINT
WAIT_FOR_CHECKPOINT
FORCE_AND_WAIT_FOR_CHECKPOINT
SAPAPO
APS_COM_VERSION_GET
APS_PROPAREA_CHANGE
APS_PROPAREA_GET_DATA
APS_PEGAREA_CHANGE
APS_PEGAREA_GET_DATA
APS_PROPAREA_GET_ALL
APS_ORDERTYPE_GET_ALL
APS_ORDER_GET_ALL
APS_PEGID_GET_ALL
APS_IPPE_GET_ALL
APS_RESOURCE_GET_ALL
APS_PLAN_VERS_GET_ALL
BAS_PLAN_VERS_GET_ALL
APS_PLAN_VERS_GET_ALL_DEFECT
APS_PCM_GET_ALL
APS_OBJECT_GET_ALL
APS_OBJECT_EXISTS
APS_CONTAINER_CHANGE
APS_CONTAINER_GET_DATA
APS_GET_ALL_CONTKEYS
APS_PLAN_VERSION_CHANGE
APS_PLAN_VERSION_GET
APS_THROW_DBP_ERROR
APS_SCHEMA_CREATE
APS_SCHEMA_DELETE
APS_SCHEMA_GET_ALL
APS_SCHEMA_GET_ALL_DEFECT
APS_TIME_GET
APS_MIXIN_ATP_DELTAS
APS_MLEVEL_ATP_PROT_DEL
APS_REORG_ATP
APS_REPAIR_ATP
APS_GET_ATP_DATA
APS_ALERTS_GET_DATA
APS_ALERTS_IN_ORDER_NET
APS_ALERTS_DELAY_ORDER_NET
APS_TRACELEVEL_READ
APS_TRACELEVEL_CHANGE
APS_TRACELEVEL_GET_ALL
APS_TRACE_WRITE
APS_CUST_GET_DATA
APS_CUST_CHANGE
APS_CHECK_PERS_DATA
APS_PERS_OBJ_EDIT
APS_IPPE_CHANGE
APS_IPPE_GET_DATA
APS_IPPE_GET_ORDERS
APS_IPPE_GET_BY_IO
APS_ORDER_GET_TIMES
APS_RG_OF_COVER_MATRIX
APS_RANGE_OF_COVER_GET
APS_OPT_GET_ACTIVITY_NET
APS_OPT_GET_ACTIVITY_NET2
APS_OPT_UPDATE_ACTIVITY_NET
APS_BS_SEND64
APS_PERFTEST_1
APS_PERFTEST_2
APS_PERFTEST_3
APS_PERFTEST_4
APS_PERFTEST_5
APS_PERFTEST_6
APS_PERFTEST_7
APS_PERFTEST_8
APS_PERFTEST_9
APS_PERFTEST_COMB
APS_PERFTEST_READ_100
APS_PERFTEST_WRITE_100
APS_PERFTEST_READ_1000
APS_PERFTEST_WRITE_1000
APS_PERFTEST_READ_8000
APS_PERFTEST_WRITE_8000
APS_PERFTEST_TRANSMISSION
APS_IO_RESET_NETCHG_FLAG
APS_ORDER_GET_DATA
APS_ORDER_CREATE
APS_ORDER_CHANGE
APS_ORDER_DELETE
APS_ORDER_MODIFY
APS_FLEX_ORDER_CHANGE
APS_CHARACT_MODIFY
APS_CONSTRAINT_MODIFY
APS_PEGID_SELECT_ORDERS
APS_ORDER_GET_REQMTS
APS_ORDER_GET_SUPPLY
APS_PCM_DELETE
APS_PCM_GET_ORDERS
APS_PEGID_GET_IO
APS_PEG_REFRESH_IO
APS_PEGID_COUNT_IO
APS_PEGID_GET_VIRT_PEG
APS_PEGID_GET_ORDERS
APS_PEG_CAT_GET_ORDERS
APS_SEARCH_DESC_CHAR
APS_FIX_PEGGING_CHANGE
APS_PEGARC_TYPE_CHANGE
APS_PEGPARAM_CHANGE
APS_PEGID_GEN_PM_TRACE
APS_ACT_STATUS_CHANGE
APS_ACT_UNPLAN
APS_ACT_GET
APS_SFW_INITIALIZE
APS_SFW_IONODE_SCHEDULE
APS_SFW_GET_NEXT_SET
APS_SFW_SCHEDULE_SET
APS_SFW_TERMINATE
APS_STOCK_TSERIES_CMP
APS_STOCK_TSERIES_GET
APS_ACT_SCHEDULE
APS_ACT_GET_BY_RES
APS_ACT_GET_BY_ORDER
APS_ACT_GET_BY_PEGAREA
APS_RESOURCE_GET
APS_ORDER_GET
APS_PEGAREA_GET
APS_PROD_GET_BY_PEGAREA
APS_CUS_ORDER_CHANGE
APS_CUS_ORDER_GET
APS_CUS_SCHD_GET_BY_PEG
APS_CUS_SCHD_GET_BY_IO
APS_DELIVERY_CONF
APS_DELIVERY_MESSAGE
APS_FORECAST_GET_BY_PEG
APS_RESOURCE_CHANGE
APS_RESOURCE_GET_DATA
APS_CAPA_PROFILE_GET
APS_PERS_OBJ_ANALYZE
APS_RES_COLL_MERGE
APS_RES_MAX_COLL_BUFFER
APS_STOCK_CHANGE
APS_STOCK_GET
APS_STOCK_GET_BY_UID
APS_SETUPMATRIX_CHANGE
APS_SETUPMATRIX_UPDATE
APS_SETUPMATRIX_GET_DAT
APS_RESOURCE_GET_BRUTTO
APS_TIMING_PATTERN_GET
APS_BUCKETS_GET_NETTO
APS_DATE_VECTOR_CHANGE
APS_DATE_VECTOR_GET
APS_TIMESTREAM_CHANGE
APS_TIMESTREAM_GET_DATA
APS_TIMESTREAM_GET_BY_RES
APS_TLO_GET_RANGE
APS_TRANS_ORDER_CHANGE
APS_TRANS_ORDER_GET
APS_DRP_AMOUNT_GET
APS_DRP_FLOW_GET
APS_DRP_IO_GET
APS_DRP_CONTI_IO_GET
APS_SNP_ORDER_GET
APS_SNP_CAPA_GET
APS_SPP_FORECAST_MODIFY
APS_SPP_PUR_REQ_MODIFY
APS_SPP_FORECAST_EXT_MODIFY
APS_SPP_ORD_AMOUNT_GET
SAPAPO_COMTEST_1
SAPAPO_COMTEST_2
SAPAPO_COMTEST_NEW_PLANVERS
APS_SET_TEST_PARAMS
SAPAPO_CLEANUP
SAPAPO_RESET_GLOBALS
SAPATP
SAPATP_READ_TIMEAXIS
SAPATP_READ_CSV_ARRAY
SAPATP_SETUP_TIMEAXIS
SAPATP_CLEAR_TIMEAXIS
SAPATP_CHECK_AVAILABILITY
SAPATP_LS_LOGFILES
SAPATP_RM_LOGFILES
SAPATP_CREATE_MATRIX_OBJECT
SAPATP_DELETE_MATRIX_OBJECT
SAPATP_GET_MATRIX_OBJECTS
SAPATP_REORG_MATRIX
SAPATP_GET_CHAR_KEY
SAPATP_GET_CHAR_KEY_MULTI
SAPATP_GET_CHAR_LIST
SAPATP_READ_MATRIX
SAPATP_MATRIX_FIND_VERSIONS
SAPATP_READ_VPL_TIMEAXIS
SAPATP_READ_BUCKET_PARAMS_SIM
SAPATP_READ_TIMEAXIS_BOMID
SAPATP_PAC_CHECK
SAPATP_DELTA_EXIST_ANCHOR
SAPATP_DELTA_GET_REMOVE_ATP
SAPATP_DELTA_GET_REMOVE_ALLVPL
SAPATP_DELTA_GET_AGGREGATES
SAPATP_DELTA_GET_POSG_ATP
SAPATP_DELTA_READ_TOTAL
SAPATP_DELTA_READ_TRGUID_APS
SAPATP_DELTA_READ_DELNRAPS
SAPATP_DELTA_ADD_ATP
SAPATP_DELTA_UPD_ALLVPL
SAPATP_DELTA_UPD_ATP
SAPATP_DELTA_COMPRESS_APS
SAPATP_DELTA_REMOVE_TRGUID
SAPATP_DELTA_UPD_POSG_ATP
SAPATP_DELTA_GET_UPD_POSG_ALVP
SAPATP_DELTA_CHANGE_POSGUID
SAPATP_DELTA_REMOVE_DATE
SAPATP_DELTA_GET_PLUIDS_F_TRG
SAPATP_DELTA_GET_PLUIDS_F_DAT
SAPATP_DELTA_CLEAR_ANCHOR
SAPATP_DELTA_GET_ALL_ADMIN_ANC
SAPATP_DELTA_DELETE_ALLOC_ANC
SAPLCK
LCK_ENQUEUE
LCK_DEQUEUE
LCK_RELOAD
LCK_CONSISTENCY
LCK_LIST_ALL
LCK_LIST_SINGLE
LCK_LIST_BY_AREA
LCK_LIST_BY_OWNER
LCK_LIST_BY_USER
LCK_LIST_OWNERS
LCK_DEQUEUE_OWNER
LCK_STATISTICS
LCK_ENQUEUE02
LCK_DEQUEUE02
LCK_LIST_ALL02
LCK_LIST_SINGLE02
LCK_LIST_BY_AREA02
LCK_LIST_BY_OWNER02
LCK_LIST_BY_USER02
SAPSIM
SIM_SIMSESSION_CONTROL
SIM_SIMSESSION_COPY
SIM_SIMSESSION_SAVEAS
SIM_SIMSESSION_UNDO
SIM_SIMSESS_HAS_DELTAS
SIM_SIMSESSION_GET_DATA
SIM_SIMSESSION_GET_DELTAS
SIM_SIMSESSION_GET_ALL
SIM_SIMSESSION_GET_ACTIVE
SAPREP
REP_INIT
REP_CLOSE
REP_CHECK
REP_CHECK_MULTI
REP_ACKNOWLEDGE
REP_REVERT
REP_RETHEAD_READ
REP_RET_READ
REP_CAPA_CHANGE
REP_DEMAND_CHNG
REP_PLNVERS_READ
REP_PLVERS_READ
REP_TX_READ
REP_DELTAS_REORG
REP_CONSI_CHK
REP_DELPOS_DEL
REP_NEWPOS_DEL
REP_DELPOS_GET
REP_NEWPOS_GET
REP_REVERT_MULTI
REP_INST_DELETE
REP_INST_CREATE
REP_DEM_INIT_REC
REP_CHECK_EXIST
REP_TIMELINE_CRE
REP_INST_CHECK
REP_CHK_LOCK_GET
REP_CHK_LOCK_SET
REP_CHK_LOCK_DEL
REP_DELTA_DISP
REP_POSGUID_DISP
REP_CORR_QTY
REP_CHECK_NEW
REP_RESERVE_DEBUG
REP_ACKN_RES_FOR_TX_DEBUG
SAPRPM
RPM_ACTS_FOR_WORKCENTER
RPM_ADD_NODES
RPM_BF_CALC_ORDER_STATUS
RPM_BF_DELETE_ORDER_STATUS
RPM_BF_MODIFY_STATUS
RPM_BF_READ_ORDER_STATUS
RPM_CHG_R_ORD_CF
RPM_COPY_RES_ORD
RPM_CREATE_MATRIX
RPM_CUSTOMIZING_MODIFY
RPM_CUSTOMIZING_READ
RPM_DEL_RES
RPM_DEL_RES_ORD
RPM_DELETE_MATRIX
RPM_DELETE_ONE_CONFIG
RPM_MATRICES_FOR_CUOBJ
RPM_MATRICES_FOR_ORDID
RPM_MATRICES_FOR_ORDID_MUL
RPM_MATRICES_REORG
RPM_MATRIX_PROPERTIES
RPM_MATRIX_PROPS_UPDATE
RPM_MODIFY_CONFIGS
RPM_MODIFY_ONE_CONFIG
RPM_PARKED_ORDERS_READ_ALL
RPM_READ_A_R_ORD
RPM_READ_ALL_ACTIVITIES
RPM_READ_ALL_CONFIGS
RPM_READ_ALL_NODES
RPM_READ_ALL_ORDERS
RPM_READ_ALL_POSVARS
RPM_READ_ALL_RES
RPM_READ_ALL_TOKENS
RPM_READ_CONFIGS_W_TOKENS
RPM_READ_ONE_CONFIG
RPM_READ_ONE_ORDER
RPM_READ_ORDER_BOM
RPM_READ_ORDER_BOM_MUL
RPM_READ_ORDER_SEQUENCE
RPM_READ_ORDERS_FOR_POSVAR
RPM_READ_POS4RS1
RPM_READ_POS4RS2
RPM_READ_RES_ORD
RPM_READ_RES4POS
RPM_READ_ROW_BITS
RPM_REORG_HARD
RPM_REORG_PARKED_ORDERS
RPM_REORG_SOFT
RPM_REQS_FOR_MATERIAL_2
RPM_ROWIDS_FOR_WORKCENTER
RPM_SESSION_SWITCH
RPM_STORE_ACTIVITIES
RPM_STORE_ORDER_SEQUENCE
RPM_STORE_ORDERS
RPM_STORE_POSVARS
RPM_STORE_R_BITS
RPM_STORE_R_ORD
RPM_STORE_RESTR
RPM_STORE_TOKENS
RPM_TIME_LINES_CREATE
RPM_TIME_LINES_DELETE
RPM_TIME_LINES_READ
RPM_TRANSPOSE_PV_MATRIX
RPM_TRANSPOSE_TOKEN_MATRIX
RPM_TRANSPOSED_CONFIGS
RPM_UPDATE_ROW_BITS_TABLE
RPM_WRKCINFO_DELETE
RPM_WRKCINFO_MODIFY
RPM_WRKCINFO_READ
SAPTS
SAPTS_ADAPT_SEASONALITY
SAPTS_AGGMULT_TIMESERIES
SAPTS_AGGSINGLE_TIMESERIES
SAPTS_ASSOCIATE_CH
SAPTS_CALC_DATA
SAPTS_CALC_SNP_INFLOW
SAPTS_CHANGE_CH
SAPTS_CHANGE_FIX_DATA
SAPTS_CHANGE_KF
SAPTS_CHANGE_PT
SAPTS_CHANGE_RELMODE
SAPTS_CHANGE_SH
SAPTS_CHANGE_TG
SAPTS_CHRANGES_IN_AGG
SAPTS_CLEAN_OBJECTS
SAPTS_COMTEST
SAPTS_CONS_OBJECTS
SAPTS_COPY_DATA
SAPTS_CREATE_INCONS_OBJECTS
SAPTS_CREATE_NEW_LAYER
SAPTS_CREATE_REGISTER
SAPTS_CREATE_RELATION
SAPTS_CREATE_SNP_RELATION
SAPTS_CREATE_TIMESERIES
SAPTS_DELETE_KEZ_TS
SAPTS_DELETE_REGISTER
SAPTS_DELETE_RELATION
SAPTS_DELETE_SNP_RELATION
SAPTS_DELETE_TIMESERIES
SAPTS_EXTR_CH_GET
SAPTS_EXTR_CH_SET
SAPTS_EXTR_KF_GET
SAPTS_EXTR_KF_SET
SAPTS_EXTR_PT_GET
SAPTS_EXTR_PT_SET
SAPTS_EXTR_TG_GET
SAPTS_EXTR_TG_SET
SAPTS_EXTR_TSBUF_GET
SAPTS_EXTR_TSBUF_SET
SAPTS_EXTR_TSBUS_GET
SAPTS_EXTR_TSBUS_SET
SAPTS_EXTR_TSH_GET
SAPTS_EXTR_TSH_SET
SAPTS_EXTR_TSKF_GET
SAPTS_EXTR_TSKF_SET
SAPTS_EXTR_TSRLSNP_GET
SAPTS_EXTR_TSRLSNP_SET
SAPTS_EXTR_TSRL_GET
SAPTS_EXTR_TSRL_SET
SAPTS_EXTR_TS_GET
SAPTS_EXTR_TS_SET
SAPTS_GET_AGGREGATED_DATA
SAPTS_GET_AGGREGATED_DATA_RIW
SAPTS_GET_ALL_DATA
SAPTS_GET_ALL_DATA_RIW
SAPTS_GET_DATA
SAPTS_GET_DATA_RIW
SAPTS_GET_INITIAL_DATA
SAPTS_GET_REG_OBJECTS
SAPTS_GET_TS_INFO
SAPTS_GET_TS_INFO2
SAPTS_INITIALIZE_DATA
SAPTS_OBJECTS_BY_CHREF
SAPTS_OBJECTS_BY_KFREF
SAPTS_OBJECTS_BY_TGREF
SAPTS_OBJECTS_GET_ALL
SAPTS_OBJECTS_IN_AGG
SAPTS_OBJECTS_QUERY_STATE
SAPTS_QUERY_OBJECTS
SAPTS_READ_CH
SAPTS_READ_KF
SAPTS_READ_PT
SAPTS_READ_SH
SAPTS_READ_TG
SAPTS_REDISAGG_DATA
SAPTS_REGISTERS_GET
SAPTS_RELATIONS_GET
SAPTS_RELATION_GET_DETAIL
SAPTS_REPLACE_COMPLETE_TSKF
SAPTS_SET_DATA
SAPTS_SET_DATA_RIW
SAPTS_SET_INITIAL_DATA
SAPTS_SET_UNIT
SAPTS_TIMESERIES_GET
SAPTS_TRACE_FILTER
SAPTS_UPDATE_TIMESERIES
==================================
Installation successfully finished
==================================
Enable user LC1ADM
OK
OK
liveCache LC1 successfully started.
Mon 10/15/2007
03:00 AM
The Problem we face is before this problem happen we created planning version name 000 , when we open the product view system says planning version is not available
please advise me
Thanks
Raj -
DBM Error return code -11 in LC10 Administration in SCM System Live Cache
Hello,
We have installed SCM 4.1 on Solaris on one box and LC 7.5 on another solaris box.
For kernel upgrade, we shut down Live Cache using LC10>administration on SCM server. After kernel patch, other patches for ABAP stack, we upgraded LC to SP11 build 35.
Since then, we get following error in LC10.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Name and Server : LCA - gva1073
DBMRFC Function : DBM_EXECUTE
Command : dbm_version
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Also, in DB59, when we try to check connection, we get following error -
General Connection Data
Connection Name....: LCA
Database Name......: LCA
Database Server....: gva1073
tp Profiles........: no_longer_used
DBM User...........: CONTROL
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: gva1075_SCD_03 (
SunOS )
1. Connect. test with "dbmcli db_state"
Successful
2. Connect. test with command mode "dbmrfc db_state"
Unsuccessful
dbm_system_error
Name and Server : LCA - gva1073
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
3. Connect. test with session mode "dbmrfc db_state"
Unsuccessful
dbm_system_error
Name and Server : LCA - gva1073
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
4. Connect. test with "native SQL" ( LCA )
Successful
++++++++++++++++++++++++++++++++++++++++++++++++++++
Can anybody please help?
Thanks and regards,
VaibhavHello Vaibhav,
while using transaction LC10, the error 11 "tp error: Terminating. [nlsui0.c ...]" occurs. The user authorization with tp fails and the application server cannot connect to the liveCache.
I assumed, that it's due to a library version mismatch, tp cannot use the liveCahe UNICODE libraries.
Please check, that the tp call at the command line works properly. And a dbmcli call in the transaction SM49 with the tp options
(dbmcli ::
-d <LC-SID> -n <LC-servername> -tpp <profile> -tpi <system-SID>
-tpc <connection - LCA/LDA> dbm_version)
works also properly.
I recommend you to update the liveCache client software on the Application server.
If you've got access to OSS/Service Market Place, then please take a look at note
649814 how to update the liveCache client software on the application server.
< Please also review the SAP notes 847736 & 831108 >
Before the liveCache client version will be upgraded on the application
server you can use the workaround by switching off the central authorization for the liveCache LCA/LDA connections:
In transaction LC10, choose Integration and deactivate the option Central authorization, then save.
If you are the official SAP customer, I recommend you to create the ticket to SAP on 'BC-DB-LVC' queue.
Thank you and best regards, Natalia Khlopina -
Live Cache Failed (DBM error)
Hi,
I am getting following error while starting live cache(LC10)
"Error DBMCLI_COMMAND_EXECUTE_ERROR when starting liveCache LC1 on server system"
Server: system
Users: SAPUSER
Logical Command: DBMRFC
Parameter: exec_lcinit restart
Name and Server : LC1 - system
DBMRFC Function : DBM_EXECUTE
Command : exec_lcinit restart
Error : DBM Error
Return Code : -24964
Error Message : ERR_EXECUTE: error in program execution#
0,sap\lcinit LC1 restart -uDBM , -uDBA , -uSQL ,
liveCache LC1 (restart)
The liveCache state is OFFLINE
DBMServer 7.6.00 Build 029-123-130-265
starting LC1 into ONLINE
ERROR : restart not possible [please check knldiag!!]
ERROR : liveCache LC1 not started (see "d:\sapdb\data\wrk\LC1\lcinit.log")
In Transaction DB59 i tried connection test "Connect. test with "native SQL" ( LCA ) unsuccesful"
how to restart Live Cache again? what will be the problem?
regards
ThennarasuHello,
what's wrong with the hint you already got?
> ERROR : restart not possible [please check knldiag!!]
Check the knldiag and then we might be able to do something about this issue.
regards,
Lars -
Hi,
Our Live cache log backup runs to tape, sometimes this may fail and our log area starts increasing, when we try to take a log backup uisng DBMGUI or DBMCLI we get below error.
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
Can you please help how to resolve this ?, since it is something critical for us during our business close end,
Thanks,
Chetan> Our Live cache log backup runs to tape, sometimes this may fail and our log area starts increasing, when we try to take a log backup uisng DBMGUI or DBMCLI we get below error.
Hmm... that is usually not the way it should work - I assume you're employing a third party backup tool here?
If not, than you definitively shouldn't create the log backup directly to tape.
Instead you should use the AUTOLOG backup to the filesystem and afterwards archive the backups to the tape.
> ERR
> -24988,ERR_SQL: SQL error
> -104,DBM command impossible at this time
Well, it means what it says: for some reason (e.g. there is already a backup running) you cannot start the backup right now.
For more detailed answers we need to see the log files of the database.
> Can you please help how to resolve this ?, since it is something critical for us during our business close end,
Hmm... what has your liveCache to do with your business (month?) end closing??
Anyhow, if something is important1, critical2 or urgent3 then the forum might not be the place to go.
In such cases always open a support message - there you've got guaranteed response times.
regards,
Lars
please don't blame me for adding the numbers to the three bad words above - this was the only way to get around the awkward content filtering of this forum
Edited by: Lars Breddemann on Sep 4, 2009 9:47 AM -
Error during Live Cache Server Installation on SCM 4.1 system
Hi All,
I have an SCM 4.1 ABAP system running on MSSQL2005 and Win2003 server.I would like to install Live Cache Server on the same Server.Livecache client was installed as part of SCM 4.1 installation.
I have installed MAXDB software and now when im trying to install Live Cache Server Instance i get the below error
Im performing the installation with user root and it is an Administrator.
WARNING 2011-12-09 11:01:25
Execution of the command "change 'user' '/install'" finished with return code 1. Output: Install mode does not apply to a Terminal server configured for remote administration.
Installation start: Friday, 09 December 2011, 11:01:23; installation directory: G:\SCM_4.1_Media\Media_Live_Cache\New_Media\51031447_2\CD_SAP_SCM_4.1_liveCache_64bit\SAPINST\NT\AMD64; product to be installed: SAP SCM 4.1> Additional Services> Install a liveCache Server instance
Transaction begin ********************************************************
WARNING 2011-12-09 11:02:33
Error 3 (The system cannot find the path specified.
) in execution of a 'CreateProcess' function, line (265), with parameter (G:\SCM_4.1_Media\Media_Live_Cache\New_Media\51031447_2\CD_SAP_SCM_4.1_liveCache_64bit\NT\AMD64\SDBUPD.EXE -l).
Transaction end **********************************************************
WARNING 2011-12-09 11:02:34
The step Fill_sapdb_db_instance_context with step key LIVECACHESERVER|ind|ind|ind|ind|ind|0|LC_SERVER_INSTALL|ind|ind|ind|ind|ind|0|Fill_sapdb_db_instance_context was executed with status ERROR.
Has anyone seen this error before ? Any pointers would be helpful.
Regards,
Ershad Ahmed.Subprocess starts at 20111209154957
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX db_enum
Execute Session Command : exit
> Subprocess stops at 20111209154957
OK
> Subprocess starts at 20111209155027
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX db_enum
Execute Session Command : exit
> Subprocess stops at 20111209155027
OK
> Subprocess starts at 20111209155221
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX db_enum
Execute Session Command : exit
> Subprocess stops at 20111209155221
OK
> Subprocess starts at 20111209155323
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX inst_enum
Execute Session Command : exit
> Subprocess stops at 20111209155324
OK
7.5.00.31 f:\sapdb\liv\db
7.6.06.10 f\sapdb\sdb\7606
7.6.06.10 C:\Program Files\sdb\7606
> Subprocess starts at 20111209155324
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX inst_enum
Execute Session Command : exit
> Subprocess stops at 20111209155324
OK
7.5.00.31 f:\sapdb\liv\db
7.6.06.10 f\sapdb\sdb\7606
7.6.06.10 C:\Program Files\sdb\7606
> Subprocess starts at 20111209161349
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX inst_enum
Execute Session Command : exit
> Subprocess stops at 20111209161349
OK
7.5.00.31 f:\sapdb\liv\db
7.6.06.10 f\sapdb\sdb\7606
7.6.06.10 C:\Program Files\sdb\7606
Regards,
Ershad Ahmed. -
Error saving transport requisitio​n to live cache
Hi Gurus,
while location heuristic running getting in bottom line message like error saving transport requisition to live cache.kindly suggest me soon.
regards,
babuDear Rajendra,
The error message seems to occur during the deletion of the purchase
requisitions when running the heuristics. The error /SAPAPO/SNP028
occurs when SNP tries to access the order data whose master data has
been changed. So, when the order's master data has changed and no
longer represent the existing one, you get this error message.
Please run the report
/SAPAPO/RLCDELETE before running the heuristics job manually to delete the inconsistent data.
So here the product 20508050 @ Mc5000-ZA59 the existing purchase
requisitions might not have anymaster data like Means of transport or PDS. Can you please delete
these inconsistent orders and run the heuristics again to check if
the orders are still created with inconsistent means of transport.
Also run consistenct reports /SAPAPO/TS_LCM_CONS_CHECK and OM17 and correct if any inconsistency is present.
BR,
Thushitha V.
Maybe you are looking for
-
100% Sad for first year on Capital Excise
Hi , I hope all are very well, i have one issue please guide me or plese share your views 1.In case of Capital goods, as per excise rules cenvat credit of excise ( CVD ) 10% plus cess 3% can only be availed to the extent of 50% in current
-
Album "Edit" function can't be configured to write photos on SD card
Edit function of Album application, as well as other edition applications (Speedseed, etc.) can't be configured to use SD card, and write editing results into internal memory.
-
Running Mac OS X Lion 10.7.1 on my MacBook Pro 13 inch 2010 I can receive inbound calls on FaceTime for Mac, no problems encountered with all inbound FaceTime calls But I can not connect outbound FaceTime calls, the receiving party will receive a rin
-
11g TP2 : subversion instability
I encountered problems when committing changes in subversion. Ofter subversion return a message "authentification failed". I'm using a local repository, i'm alone. I manage two applications in the repository. One applications contains more than 5000
-
how to buy Adobe ExportPDF when in Mauritius