Live cache optimizer. support version

Hi Gurus, Is that true windows 2008 server will not be supported for Optimizer?. I found in SAP quick sizer, Under SCM - optimizer.
"Operating System Support
The SAP APO Optimizer is currently supported only on Microsoft Windows.
u2022     32Bit: SAP APO Optimizers for SAP APO 3.X, SCM 4.X and SCM 5.0 are released for u201CWindows 2000 Advanced Serveru201D and u201CWindows Server 2003u201D.
u2022     64Bit: SAP APO Optimizers for SCM 5.1 and 7.0 are released for u201CWindows Server 2003 x64-Editionu201D
u2022     Linux 64Bit: SAP APO Optimizers for SCM 5.1 and 7.0 are released for Linux.on x64"
Please reply, thx in advance

Hi,
Following OSS notes related to Windows 2008 and LiveCache may help.
OSS notes 1354248 & 1409895 (Windows 2008: TCP/IP Communciation MaxDB/liveCache is slow).
Regards
Datta

Similar Messages

What is meant by set up matrices ,atp matrices ,simultion version in live cache

what is meant by set up matrices ,atp matrices ,simultion version in live cache
Please help

THere are overall versions, and you can copy these and view the data in both SNP and PPDS (or DP as well)
then there are specific simulation versions with the PPDS tool.
See below link.
http://help.sap.com/saphelp_scm70/helpdata/EN/e1/8e51341a06084de10000009b38f83b/frameset.htm
So it saves a version of the production orders. Saves it in livecache and then can either be used or discarded.
j

Live cache upgrade on Windows 2003, IA64 clustered environment

Hi,
We are currently upgrading the Live Cache from 7.6.03,    BUILD 008-123-159-187 to 7.7.03   BUILD 023-123-174-368.
Note # 508979 is being referred to. The upgrade has completed successfuly on one Node A but is interruopted on Node B. The error log is as follows
INSTALLER_INFO: Version = 7.7.03 Build 023-123-174-368
INSTALLER_INFO: Changelist = 174368
INSTALLER_INFO: MakeId = 285415
INSTALLER_INFO: Type = kit
SYS_INFO: Host name = FMSAP457
SYS_INFO: System = Windows
SYS_INFO: Architecture = IA64
SYS_INFO: Version = NT 5.2
SYS_INFO: Subversion = Service Pack 2
CALL: SDBUPD -INSTANCE -profile APO LiveCache
STDOUT:
     SAP liveCache INSTANCE UPDATE
STDOUT:      *****************************
STDOUT: starting installation We, Oct 08, 2008 at 01:26:46
STDOUT: operating system: Windows IA64 NT 5.2 Service Pack 2
STDOUT: callers working directory: Z:/SCM_51upgradeCD/SCM5.1_SPS6/lca600011_livecache-win-64bit-i386-7_7_03_23
STDOUT: installer directory: Z:/SCM_51upgradeCD/SCM5.1_SPS6/lca600011_livecache-win-64bit-i386-7_7_03_23
MSG: InstallRegistry: space check ok: 16843616 kb on W: (17719292 kb total) available
MSG: install registry successfully locked
MSG: read 16 PACKAGES
MSG: net registry size = 133192 bytes
WRN: InstallRegistry::reserveSpace(): file >= 1024 kb
STDOUT: archive directory: Z:/SCM_51upgradeCD/SCM5.1_SPS6/lca600011_livecache-win-64bit-i386-7_7_03_23
STDOUT:
MSG: debug package SDBBAS.SDB is valid
MSG: debug package SDBKRN.SDB is valid
MSG: debug package SDBUTL.SDB is valid
MSG: no installation data to migrate
STDOUT: beginning to check sap db instances
STDOUT: existing instance:
STDOUT: 0: LCA   "O:/sapdb/LCA/db" 7.6.3.8
STDOUT: 1: none
STDOUT: please enter instance id:
STDIN: 0
STDOUT: please enter database manager operators name:
STDIN: control
STDOUT: please enter database manager operators password: STDOUT:
STDIN:
STDOUT: resume broken instance check
x_server is running
got following x_server data:
version = W64/INTEL 7.6.3    Build 008-123-159-187
dbmsrv uses db_online
dbmsrv uses db_admin
STDOUT: finding instance type...
instance type is LVC
getting catalog encoding...
catalog encoding is UNICODE
STDOUT: finding starting release...
kernel executable is O:\sapdb\LCA\db/pgm/kernel.exe
kernel version by GetBuildString 7.6.3    Build 008-123-159-187
starting release is 7.6.3    Build 008-123-159-187
STDOUT: finding apo starting release...
sapapo lib is O:\sapdb\LCA\db/sap/sapapo.dll
apo version by GetBuildInfo 5.0.0.13
apo starting release is 5.0.0.13
STDOUT: finding migration strategy...
migration is using external livecache consistency
from LVC 7.6.3    Build 008-123-159-187
and APO 5.0.0.13
to   LVC 7.7.03
and APO 6.0.0.011
STDOUT: looking for running instances...
no instances found
db_enum
OK
MSG: writing 16 packages
MSG: net install registry size = 133192 bytes
MSG: wrote install registry (156751 bytes)
STDERR: MaxDB instance "LCA" not ready to update
STDERR: looking for running instances...
no instances found
db_enum
OK
STDERR: SAP liveCache instance update exited abnormally at We, Oct 08, 2008 at 01:28:48
MSG: install registry successfully unlocked
Regards
Abraham

As a SAP customer: please open a support message for this!
regards,
Lars

Live Cache Integration Errror

Hi Experts / Gurus,
Can you please help me in this regard.
I have installed SCM 2007 on my Laptop ( Windows 2003 - x64 Bit Version). Installtion went on well. i am able logon successfuuly. when i am trying to test the connection DB59 - Application Server - > Live Cache, i am facing error.
i am pasting the error logfile below
connect test with DBMCLI DB_STATE                                                        Successful
connect test with COMMAND MODE "DBMRFC DB_STATE                        Successful
connect test with SESSION MODE "DBMRFC DB_STATE                          Successful
connect test with native SQL(LCA)                                                            Since Offline Can not determine
when i check the integration test, it says, offline mode, there is Diamond symbol shown..
I am unable to do any transaction which requires Live Cache.
Please Advice.
Thanks in Advance
Venkata Ramjeevan    PMP, CSCP

> Should i do anything with Max DB? Currently i am using Max DB 7.7 Version with Live cache 7.7... do i need to start Max DB separately. If yes, please guide me, how to do that..
Why should you do anything with MaxDB?
You got a problem with your liveCache instance - that's it.
This has nothing to do with any other MaxDB instance here.
And, just for the case you got confused:
If you use a liveCache - there is just one software running.
It's the MaxDB kernel.
The only part that makes a liveCache instance different from a standard MaxDB instance is:
liveCache comes with a bunch of build-in (yes, into the MaxDB kernel) C++-routines, that can be called by SCM.
These C++-routines do all the work and run in the MaxDB Kernel process.
If you cannot get it running, you may make use of the maintenance fee your company pays and open a support message ...
regards,
Lars

Live Cache 7.5. Installation SCM4.1 ERROR MDB-070020

Hi,
we`re trying to install live cache 7.5.00.21 on SCM 4.1.
(Maxdb version of normal db is 7.6.05.09).
We had an other version installed before, which we deleted because of other errors.
Now we`re getting the following error message - any idea?
WARNING 2009-01-16 11:19:37
Execution of the command "/special1/TAD_NEU/lcinst/UNIX/HPIA64/SDBINST '-indep_prog' '/sapdb/programs' '-indep_data' '/sapdb/data' '-depend' '/sapdb/LCA/db'
'-profile' 'APO LiveCache' '-o' '1100' '-g' '1100' '-b'" finished with return code 1. Output:
starting preparing phase of package Base 7.5.00.21 64 bit
cannot downgrade package
skipping package
starting preparing phase of package Server Utilities 7.5.00.21 64 bit
cannot downgrade package
skipping package
starting preparing phase of package Database Kernel 7.5.00.21 64 bit
cannot do update check - test file "/sapdb/LCA/db/pgm/kernel" not found
installation exited abnormally at Fr, Jan 16, 2009 at 11:19:37
ERROR 2009-01-16 11:19:37
MDB-070020 The database installer reported an error. Some database applications are probably still running.
Check the log file sdbinst.log.

Michael Schneider wrote:>
> Hi,
>
> we`re trying to install live cache 7.5.00.21 on SCM 4.1.
> (Maxdb version of normal db is 7.6.05.09).
>
> We had an other version installed before, which we deleted because of other errors.
>
> Now we`re getting the following error message - any idea?
Sure - how did you uninstall the former installation?
rm -f /sapdb/<DBSID> ??
To correctly uninstall a MaxDB/liveCache you'll always have to use the SDBUNINST tool.
Since there seems to be another installation on the same server, it's now a bit complicated to clean up the registration mess... You should open a support message for that. Then we'll see what we can do here.
regards,
Lars

Live Cache x_server throwing error when starting

Hi,
When i'm trying to start the Live Cache X_server , It is giving the below error:
12798 NISERVER NI support started.
WNG 12453 NISSLSRV NISSL Init: SSL: Could not locate licence file
12902 XSERVER started, 'X64/LINUX 7.6.00 Build 018-123-119-055'
Os: IBM AIX 5.3
SCM 5.0
Please anybody have the solution, please share.

ok, fixed it.
Putting the dtd on a machine that it can see solved it... would be nice if the doc mentioned that your test machine (the one that it warns is insecure as everything is installed as root etc etc) needs to have outgoing internet access...
Ho hum.
Oddly, requesting that dtd from sun gives a 500 - using:
<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE sun-web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Application Server 8.1 Servlet 2.4//EN" "http://cherry.kent.ac.uk/sun-web-app_2_3-1.dtd">
<sun-web-app>
<context-root>/httpbind</context-root>
</sun-web-app>where sun-web-app_2_3-1.dtd if the dtd available at http://www.sun.com/software/dtd/appserver/sun-web-app_2_3-1.dtd
hopefully this will give someone else a hint :)

Database ID is showing different host name in live cache backup

Hello All ,
While triggering the live cache backup , the database id is showing different one.
i have build the system using cloning method from production. the server name is showing correct one but database id still showing the source system.
Please help me to fix the issue . Thanks in advance .
Backlog is pasted below.
>backup_start LCD_DB_Backup
OK
Returncode              0
Date                    20140804
Time                    00081900
Server                  *********(showing correct hostname)
Database                LCD
Kernel Version          Kernel    7.9.08   Build 008-123-247-140
Pages Transferred       913824
Pages Left              0
Volumes                 1
Medianame               TH_LCD_DB_Backup
Location                /sapdb/LCD/backup/LCD_DB_Backup
Errortext
Label                   DAT_000000820
Is Consistent           true
First LOG Page          4981
Last LOG Page
DB Stamp 1 Date         20140804
DB Stamp 1 Time         00081900
DB Stamp 2 Date
DB Stamp 2 Time
Page Count              913803
Devices Used            1
Database ID             xxxxxx:LCD_20140803_103951 ( wrong database ID: xxxxx)
Max Used Data Page      0
Converter Page Count    991
Regards,

Hello,
I recommend you to create the SAP message to BC-DB-LVC component and get SAP support.
- How have you build the system using cloning method from production?
- What note/documens did you follow?
Regards, Natalia Khlopina

ST22 timeout for all LC related transactions LIVE cache start stop working from LC10

Hi Team
we are a getting a ST22 timeout for all LC related transactions LIVE cache start stop working from LC10
LC version 7.9
OS AIX
SAP SCM 7
SDBVERIFY giving the following error
Checking package Redist Python
Checking package Loader
Checking package ODBC
Checking package Messages
Checking package JDBC
Checking package DB Analyzer
ERR: Failed
ERR: Checking installation "Legacy" failed
ERR: Group of directory /sapdb/data/config/install changed [0 =>
sdbregview -l is showing good.
any idea what might went wrong.
trying to use sdbverify -repair_permissions , but not sure about the exact syntax to use.
and it is not related to timeout parameter, we tested with different timeout values, but still the same error.
thanks
Kishore Ch

Hello Kishore,
you could check the sizing of the liveCache data.
* Report /SAPAPO/TS_LCM_REORG_SNP has checks of the SNP planning areas for superfluous objects.
* Delete old/temporary APO data.
* /SAPAPO/TS_LCM_REORG report checked TS superfluous objects.
If you didn't create the planning versions, copy of planning versions & data load to liveCache, then create the SAP message to check your system on the question of the dataarea usage.
If you have the long running APO transactions => performance of the SCM system has to be checked.
If you have the bottleneck in liveCache & could not solve the case by yourself => create the SAP message to BC-DB-LVC and get SAP support.
Best regards, Natalia Khlopina

Sales ORDER- live cache problem- HIgh

Hello Experts,
Please advise me how to fix the error message which occurs while creating sakes order.
Error message reads:
" ATP check in System PA1CLNT410 is not possible since
livecache is not active".
Kindly advise

In SAP Best Practice, I found this note which I thought would be helpful to you.
Check Planning Version 000
In your SAP SCM system, use the following path:
SAP Menu --> Advanced Planning and Optimization --> Master Data --> Planning Version Management --> Model and Version Management
Make sure that the planning version 000 u2013 Active Version is available.
If this planning version is not available, this means that the LiveCache has not been initialized. Proceed with the LiveCache initialization before you start with the installation of any SAP Best Practices scenario.
*Live Cache*
LiveCache version:     KERNEL     7.5.0   Build 015-122-076-685
DBM server version:      DBMServer 7.5.0   Build 015-122-076-685
Operating system:     SunOS
So what you have to do is that check with your basis people to instal LiveCache
thanks
G. Lakshmipathi

Migration and Live Cache Doubts

Hello,
I need to migrate Windows 2003 Server 32-bit/MAXDB 7.6.0.035 for Windows 2008 Server 64-bit/MAXDB 7.6.0.035 and have doubts:
1 - What is the best way to accomplish this migration? Via Sapinst? If there is another way, how?
2 - In a note "1409895 - Windows 2008: TCP / IP communication MaxDB / liveCache is slow," reports to
upgrade to a new version of SAP MaxDB / liveCache. If I upgrade to MAXDB7606_14-20001288.SAR (MaxDB 7.6.06.14
Server Package) already solved?
    I'm confused about this because in the Live Cache "My Company's Application Components" SAP-SCM "-SAP
SCM 5.0 Component-by-Entry SAP liveCache the last SAP MaxDB / liveCache 7.6.03.12 Security Patch
is MLCSEC7603_12-10003432.SAR, but the version of MaxDB is 7.6.0.035
Sorry my questions but don´t know very about MAXDB.
thank´s for any help

Hello Emerson Eduardo do Espirito Santo,
1. It will be best for customer to create the SAP message and get the expert SAP support.
2. Please check and answer on the questions to get clear on your project first:
What is the version of your system which is planning to be migrated?
      SAP ECC 6.0 or SCM 5.0 ?
What MAXDB software do you have on the Windows Server 2003 32-Bit?
    Post output of the command:
      sdbregview u2013l
3. u201CI don´t know if I need the Live Cache.u201D
->Why you was writing about the liveCache?
->Could you ask the customer what versions of the systems they have in the landscape?
->If you login to the SAP ECC 6.0, top menu: system->status
What is the database of the system?
4. Please see the SAP notes 1014782 and 960769, if the customer have SAP ECC6.0/MAXDB 7.6 on Windows Server 2003 32-Bit and want to migrate SAP ECC6.0/MAXDB 7.6 on Windows 2008 Server 64-bit version.
Customer can use backup and recovery to perform a homogeneous system copy of a MaxDB database instance, SAP Note
129352. For more information about the procedure, please, see the installation documentation about the homogeneous system copy.
5. Please give customer the reference to the SAP note:
              1020175     FAQ: MaxDB installation, upgrade or applying a patch
in case of question on how to apply the MaxDB kernel patch.
Regards, Natalia Khlopina

Live Cache Crashed

Hello Guru's,
My Production system Live cache has been crashed. I am trying to restore the last backup which was taken yesterday night 8:00pm. I am able to restore the Live Cache however unable to restore the logs to recover PIT, as it is complaining about log sequence. I am not sure about finding the sequence number it is asking for.
Crash happened today morning 7:00am. Backup restored last night 8pm and trying to do point in time recovery. Backup has been restored and trying to apply logs.
Note;- log backup is for every 2 hours, so after the complete backup last night, we have log backup's for every 2 hours and trying to apply the same.
Kindly suggest what can be done..
Thanks,
Sravanthi.

Hello,
1.
You have questions how to solve the liveCache issues on the PROD system
=>
As already recommended Lars, please open the SAP message to the component BC-DB-LVC to get SAP support.
It will be helpful to know the SCM/APO version, liveCache version and more details about the liveCache crash.
2.
In case you had the liveCache crash due the hardware problems, and the data or log volumes or liveCache configuration files are corrupted
=>
solve the hardware issues first or use another server
Follow the SAP note to create the liveCache instance:
    457425     Homogenous liveCache copy using backup/restore
   You need to create/initialize the liveCache instance for restore or run the Restore with initialization, restore the successful databackup, then leave the liveCache in admin status and continue the restore of the incremental databackup/logbackups in sequence if needed.
*More information could be found in the SAP notes:
1377148     FAQ: SAP MaxDB backup/recovery
869267                     FAQ: SAP MaxDB LOG area
820824          FAQ: SAP MaxDB/liveCache technology
Thank you and best regards, Natalia Khlopina

Transcation code to monitor the live cache usage

Hi, I wanted to know the transcation to check the live cache & optimser usage ??
Regards,
Bhavesh

Hi Bhavesh,
The following are the transaction codes as required by you.
1) LC10 - Livecache Monitoring
2) /SAPAPO/OM03 - liveCache Test Program: Start liveCache Check
3) /SAPAPO/OM04 - LCA Version
4) /SAPAPO/OM11 - Livecache Log
5) /SAPAPO/OM12 - Delete Livecache Log
6) /SAPAPO/OM13 - Analyze liveCache and LCA Objects
7) /SAPAPO/OM17 - liveCache Consistency Check
8) /SAPAPO/OPT_STOP - Terminate Optimization Runs
9) /SAPAPO/OPT12 - Optimisation Process Overview
10)/SAPAPO/OPT03 - Optimisation User Overview
11)/SAPAPO/OPT11 - Optimisation Log Display
Hope the above information is useful for you. Please confirm
Regards
R. Senthil Mareeswaran.

MAXLOCKS alert generation - SAP Live Cache

Hello Guru's,
We have a requirement for setting alerting for parameter MAXLOCKS on live cache server when it reaches to a threshold value, but we couldn't find any monitoring set in RZ20.
So we have got an idea to use Count(*) on LOCKSTATISTICS and calculate a threshold. But not sure how to do it through Shell Script for MAx DB? Please suggest if any other options as well.
Thanks and Regards,
Sri's

Hello Sri's,
1.
Please review the notes:
65946          Lock escalations
1243937     FAQ: MaxDB SQL locks
As you know, the system table LOCKLISTSTATISTICS displays the statistics of the
lock management since the last database start. This system table is insufficient for the analysis of locking conflicts.
2.
Review the sapact script attach to the SAP Note No. 974758 as HINT to your question on collecting the output
of the statement :
SELECT * FROM SYSDBA.LOCKLISTSTATISTICS     and
SELECT * FROM SYSDBA.LOCKSTATISTICS
Periodically during the job/application run in question.
Also use the DB analyzer to find the bottleneck in liveCache.
3.
Create the SAP message and get SAP support.
It will be helpful to know what is the version of your system, SAP basis SP, the liveCache version and the reason of your project.
Did you get the DB analyzer warnings with lock escalation?
Regards, Natalia Khlopina

DBM Error return code -11 in LC10 Administration in SCM System Live Cache

Hello,
We have installed SCM 4.1 on Solaris on one box and LC 7.5 on another solaris box.
For kernel upgrade, we shut down Live Cache using LC10>administration on SCM server. After kernel patch, other patches for ABAP stack, we upgraded LC to SP11 build 35.
Since then, we get following error in LC10.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Name and Server : LCA - gva1073
DBMRFC Function : DBM_EXECUTE
Command : dbm_version
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Also, in DB59, when we try to check connection, we get following error -
General Connection Data
Connection Name....: LCA
Database Name......: LCA
Database Server....: gva1073
tp Profiles........: no_longer_used
DBM User...........: CONTROL
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: gva1075_SCD_03 (
SunOS )
1. Connect. test with "dbmcli db_state"
Successful
2. Connect. test with command mode "dbmrfc db_state"
Unsuccessful
dbm_system_error
Name and Server : LCA - gva1073
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
3. Connect. test with session mode "dbmrfc db_state"
Unsuccessful
dbm_system_error
Name and Server : LCA - gva1073
DBMRFC Function : DBM_CONNECT
Error : DBM Error
Return Code : -11
Error Message : tp error: Terminating. [nlsui0.c 1934] pid
4. Connect. test with "native SQL" ( LCA )
Successful
++++++++++++++++++++++++++++++++++++++++++++++++++++
Can anybody please help?
Thanks and regards,
Vaibhav

Hello Vaibhav,
while using transaction LC10, the error 11 "tp error: Terminating. [nlsui0.c ...]" occurs. The user authorization with tp fails and the application server cannot connect to the liveCache.
I assumed, that it's due to a library version mismatch, tp cannot use the liveCahe UNICODE libraries.
Please check, that the tp call at the command line works properly. And a dbmcli call in the transaction SM49 with the tp options
(dbmcli ::
-d <LC-SID> -n <LC-servername> -tpp <profile> -tpi <system-SID>
-tpc <connection - LCA/LDA> dbm_version)
works also properly.
I recommend you to update the liveCache client software on the Application server.
If you've got access to OSS/Service Market Place, then please take a look at note
649814 how to update the liveCache client software on the application server.
< Please also review the SAP notes 847736 & 831108 >
Before the liveCache client version will be upgraded on the application
server you can use the workaround by switching off the central authorization for the liveCache LCA/LDA connections:
In transaction LC10, choose Integration and deactivate the option Central authorization, then save.
If you are the official SAP customer, I recommend you to create the ticket to SAP on 'BC-DB-LVC' queue.
Thank you and best regards, Natalia Khlopina

Data fetch from live cache

How can I retrieve data from live cache?This is in Demand Planning : SCM APO.
Please suggest ways.
Thanks & Regards,
Savitha

Hi,
some time ago I worked on SAP APO.
To read live cache, you first have to open a SIM session.
You can do this as shown in this function module:
FUNCTION ZS_SIMSESSION_GET.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(IV_SIMID) TYPE /SAPAPO/VRSIOID
*" EXPORTING
*"     REFERENCE(EV_SIMSESSION) TYPE /SAPAPO/OM_SIMSESSION
CONSTANTS:
lc_simsession_new       TYPE c LENGTH 1 VALUE 'N'.
DATA:
lt_rc                   TYPE /sapapo/om_lc_rc_tab,
lv_simsession           LIKE ev_simsession.
IF NOT ev_simsession IS INITIAL.
    EXIT.
ENDIF.
*--> create Simsession
CALL FUNCTION 'GUID_CREATE'
    IMPORTING
      ev_guid_22 = lv_simsession.
*--> create transactional simulation
CALL FUNCTION '/SAPAPO/TSIM_SIMULATION_CONTRL'
    EXPORTING
      iv_simversion            = iv_simid
      iv_simsession            = lv_simsession
      iv_simsession_method     = lc_simsession_new
      iv_perform_commit        = space
    IMPORTING
      et_rc                    = lt_rc
    EXCEPTIONS
      lc_connect_failed        = 1
      lc_com_error             = 2
      lc_appl_error            = 3
      multi_tasim_registration = 4.
IF sy-subrc > 0.
    CLEAR ev_simsession.
*   error can be found in lt_rc
ENDIF.
* return simsession
ev_simsession = lv_simsession.
ENDFUNCTION.
Then you can access the live cache.
In this case we read an order (if I rememver correctly, it's a plan order):
DATA:
lv_vrsioid                  TYPE /sapapo/vrsioid,
lv_simsession           TYPE /sapapo/om_simsession.
* Get vrsioid
CALL FUNCTION '/SAPAPO/DM_VRSIOEX_GET_VRSIOID'
    EXPORTING
      i_vrsioex_fld = '000' "By default
    IMPORTING
      e_vrsioid_fld = lv_vrsioid
    EXCEPTIONS
      not_found     = 1
      OTHERS        = 2.
CALL FUNCTION 'ZS_SIMSESSION_GET'
      EXPORTING
        iv_simid      = iv_vrsioid
      IMPORTING
        ev_simsession = lv_simsession.
CALL FUNCTION '/SAPAPO/RRP_LC_ORDER_GET_DATA'
    EXPORTING
      iv_order      = iv_orderid
      iv_simversion = iv_vrsioid
    IMPORTING
      et_outputs    = lt_outputs
      et_inputs     = lt_inputs.
If you change something in your simsession, you have to merge it back afterwards, so that your changes become effective.
You can do this like that:
* Merge simulation version (to commit order changes)
CALL FUNCTION '/SAPAPO/TSIM_SIMULATION_CONTRL'
    EXPORTING
      iv_simversion                = lv_vrsioid
      iv_simsession                = lv_simsession
      iv_simsession_method         = 'M'
    EXCEPTIONS
      lc_connect_failed            = 1
      lc_com_error                 = 2
      lc_appl_error                = 3
      multi_tasim_registration     = 4
      target_deleted_saveas_failed = 5
      OTHERS                       = 6.
I hope this helps...

Live cache optimizer. support version

Similar Messages

Maybe you are looking for