Live cache start and stop
Hi Guys,
I have some problem in live cache in APO , i was posting in APO forum could not able to find clear findings
so i am diverting my questions here in this forum
basically the APO and R/3 system are running smoothly with no problem in CIF
but accidently we done the below steps
Entered into transaction LC-10
Click Live cache Monitoring
click the folder - Administration
click Operating under - configuration
There are two Icon bar - start LiveCache and stop LiveCache
First i clicked stop and then after few minutes i click start
After some time i try to open the Product view in APO, the system says Live cache not available
can some one help me in this regard
Thanks
Raj
Hi,
Here is the log you asked me
veCache LC1 (restart)
Mon 10/15/2007
03:00 AM
installation path = e:\sapdb\lc1\db
OK
OK
DBMServer 7.6.03 Build 008-123-159-187
starting LC1 into ONLINE
OK
Creating liveCache application procedures
OK
0,OK: everything works fine
0,""e:\sapdb\lc1\db\bin\x_python" "e:\sapdb\lc1\db\env\lapps.py" -R "e:\sapdb\lc1\db" -d LC1 -u SUPERDBA,*"
Installing APPS
Droping Procedures
LC1ADM
SAPTS
SAPLCK
SAPAPO
SAPATP
SAPREP
SAPSIM
SAPRPM
DBPINSTALL
Creating Procedures
LC1ADM
dbpinstall
FORCE_CHECKPOINT
WAIT_FOR_CHECKPOINT
FORCE_AND_WAIT_FOR_CHECKPOINT
SAPAPO
APS_COM_VERSION_GET
APS_PROPAREA_CHANGE
APS_PROPAREA_GET_DATA
APS_PEGAREA_CHANGE
APS_PEGAREA_GET_DATA
APS_PROPAREA_GET_ALL
APS_ORDERTYPE_GET_ALL
APS_ORDER_GET_ALL
APS_PEGID_GET_ALL
APS_IPPE_GET_ALL
APS_RESOURCE_GET_ALL
APS_PLAN_VERS_GET_ALL
BAS_PLAN_VERS_GET_ALL
APS_PLAN_VERS_GET_ALL_DEFECT
APS_PCM_GET_ALL
APS_OBJECT_GET_ALL
APS_OBJECT_EXISTS
APS_CONTAINER_CHANGE
APS_CONTAINER_GET_DATA
APS_GET_ALL_CONTKEYS
APS_PLAN_VERSION_CHANGE
APS_PLAN_VERSION_GET
APS_THROW_DBP_ERROR
APS_SCHEMA_CREATE
APS_SCHEMA_DELETE
APS_SCHEMA_GET_ALL
APS_SCHEMA_GET_ALL_DEFECT
APS_TIME_GET
APS_MIXIN_ATP_DELTAS
APS_MLEVEL_ATP_PROT_DEL
APS_REORG_ATP
APS_REPAIR_ATP
APS_GET_ATP_DATA
APS_ALERTS_GET_DATA
APS_ALERTS_IN_ORDER_NET
APS_ALERTS_DELAY_ORDER_NET
APS_TRACELEVEL_READ
APS_TRACELEVEL_CHANGE
APS_TRACELEVEL_GET_ALL
APS_TRACE_WRITE
APS_CUST_GET_DATA
APS_CUST_CHANGE
APS_CHECK_PERS_DATA
APS_PERS_OBJ_EDIT
APS_IPPE_CHANGE
APS_IPPE_GET_DATA
APS_IPPE_GET_ORDERS
APS_IPPE_GET_BY_IO
APS_ORDER_GET_TIMES
APS_RG_OF_COVER_MATRIX
APS_RANGE_OF_COVER_GET
APS_OPT_GET_ACTIVITY_NET
APS_OPT_GET_ACTIVITY_NET2
APS_OPT_UPDATE_ACTIVITY_NET
APS_BS_SEND64
APS_PERFTEST_1
APS_PERFTEST_2
APS_PERFTEST_3
APS_PERFTEST_4
APS_PERFTEST_5
APS_PERFTEST_6
APS_PERFTEST_7
APS_PERFTEST_8
APS_PERFTEST_9
APS_PERFTEST_COMB
APS_PERFTEST_READ_100
APS_PERFTEST_WRITE_100
APS_PERFTEST_READ_1000
APS_PERFTEST_WRITE_1000
APS_PERFTEST_READ_8000
APS_PERFTEST_WRITE_8000
APS_PERFTEST_TRANSMISSION
APS_IO_RESET_NETCHG_FLAG
APS_ORDER_GET_DATA
APS_ORDER_CREATE
APS_ORDER_CHANGE
APS_ORDER_DELETE
APS_ORDER_MODIFY
APS_FLEX_ORDER_CHANGE
APS_CHARACT_MODIFY
APS_CONSTRAINT_MODIFY
APS_PEGID_SELECT_ORDERS
APS_ORDER_GET_REQMTS
APS_ORDER_GET_SUPPLY
APS_PCM_DELETE
APS_PCM_GET_ORDERS
APS_PEGID_GET_IO
APS_PEG_REFRESH_IO
APS_PEGID_COUNT_IO
APS_PEGID_GET_VIRT_PEG
APS_PEGID_GET_ORDERS
APS_PEG_CAT_GET_ORDERS
APS_SEARCH_DESC_CHAR
APS_FIX_PEGGING_CHANGE
APS_PEGARC_TYPE_CHANGE
APS_PEGPARAM_CHANGE
APS_PEGID_GEN_PM_TRACE
APS_ACT_STATUS_CHANGE
APS_ACT_UNPLAN
APS_ACT_GET
APS_SFW_INITIALIZE
APS_SFW_IONODE_SCHEDULE
APS_SFW_GET_NEXT_SET
APS_SFW_SCHEDULE_SET
APS_SFW_TERMINATE
APS_STOCK_TSERIES_CMP
APS_STOCK_TSERIES_GET
APS_ACT_SCHEDULE
APS_ACT_GET_BY_RES
APS_ACT_GET_BY_ORDER
APS_ACT_GET_BY_PEGAREA
APS_RESOURCE_GET
APS_ORDER_GET
APS_PEGAREA_GET
APS_PROD_GET_BY_PEGAREA
APS_CUS_ORDER_CHANGE
APS_CUS_ORDER_GET
APS_CUS_SCHD_GET_BY_PEG
APS_CUS_SCHD_GET_BY_IO
APS_DELIVERY_CONF
APS_DELIVERY_MESSAGE
APS_FORECAST_GET_BY_PEG
APS_RESOURCE_CHANGE
APS_RESOURCE_GET_DATA
APS_CAPA_PROFILE_GET
APS_PERS_OBJ_ANALYZE
APS_RES_COLL_MERGE
APS_RES_MAX_COLL_BUFFER
APS_STOCK_CHANGE
APS_STOCK_GET
APS_STOCK_GET_BY_UID
APS_SETUPMATRIX_CHANGE
APS_SETUPMATRIX_UPDATE
APS_SETUPMATRIX_GET_DAT
APS_RESOURCE_GET_BRUTTO
APS_TIMING_PATTERN_GET
APS_BUCKETS_GET_NETTO
APS_DATE_VECTOR_CHANGE
APS_DATE_VECTOR_GET
APS_TIMESTREAM_CHANGE
APS_TIMESTREAM_GET_DATA
APS_TIMESTREAM_GET_BY_RES
APS_TLO_GET_RANGE
APS_TRANS_ORDER_CHANGE
APS_TRANS_ORDER_GET
APS_DRP_AMOUNT_GET
APS_DRP_FLOW_GET
APS_DRP_IO_GET
APS_DRP_CONTI_IO_GET
APS_SNP_ORDER_GET
APS_SNP_CAPA_GET
APS_SPP_FORECAST_MODIFY
APS_SPP_PUR_REQ_MODIFY
APS_SPP_FORECAST_EXT_MODIFY
APS_SPP_ORD_AMOUNT_GET
SAPAPO_COMTEST_1
SAPAPO_COMTEST_2
SAPAPO_COMTEST_NEW_PLANVERS
APS_SET_TEST_PARAMS
SAPAPO_CLEANUP
SAPAPO_RESET_GLOBALS
SAPATP
SAPATP_READ_TIMEAXIS
SAPATP_READ_CSV_ARRAY
SAPATP_SETUP_TIMEAXIS
SAPATP_CLEAR_TIMEAXIS
SAPATP_CHECK_AVAILABILITY
SAPATP_LS_LOGFILES
SAPATP_RM_LOGFILES
SAPATP_CREATE_MATRIX_OBJECT
SAPATP_DELETE_MATRIX_OBJECT
SAPATP_GET_MATRIX_OBJECTS
SAPATP_REORG_MATRIX
SAPATP_GET_CHAR_KEY
SAPATP_GET_CHAR_KEY_MULTI
SAPATP_GET_CHAR_LIST
SAPATP_READ_MATRIX
SAPATP_MATRIX_FIND_VERSIONS
SAPATP_READ_VPL_TIMEAXIS
SAPATP_READ_BUCKET_PARAMS_SIM
SAPATP_READ_TIMEAXIS_BOMID
SAPATP_PAC_CHECK
SAPATP_DELTA_EXIST_ANCHOR
SAPATP_DELTA_GET_REMOVE_ATP
SAPATP_DELTA_GET_REMOVE_ALLVPL
SAPATP_DELTA_GET_AGGREGATES
SAPATP_DELTA_GET_POSG_ATP
SAPATP_DELTA_READ_TOTAL
SAPATP_DELTA_READ_TRGUID_APS
SAPATP_DELTA_READ_DELNRAPS
SAPATP_DELTA_ADD_ATP
SAPATP_DELTA_UPD_ALLVPL
SAPATP_DELTA_UPD_ATP
SAPATP_DELTA_COMPRESS_APS
SAPATP_DELTA_REMOVE_TRGUID
SAPATP_DELTA_UPD_POSG_ATP
SAPATP_DELTA_GET_UPD_POSG_ALVP
SAPATP_DELTA_CHANGE_POSGUID
SAPATP_DELTA_REMOVE_DATE
SAPATP_DELTA_GET_PLUIDS_F_TRG
SAPATP_DELTA_GET_PLUIDS_F_DAT
SAPATP_DELTA_CLEAR_ANCHOR
SAPATP_DELTA_GET_ALL_ADMIN_ANC
SAPATP_DELTA_DELETE_ALLOC_ANC
SAPLCK
LCK_ENQUEUE
LCK_DEQUEUE
LCK_RELOAD
LCK_CONSISTENCY
LCK_LIST_ALL
LCK_LIST_SINGLE
LCK_LIST_BY_AREA
LCK_LIST_BY_OWNER
LCK_LIST_BY_USER
LCK_LIST_OWNERS
LCK_DEQUEUE_OWNER
LCK_STATISTICS
LCK_ENQUEUE02
LCK_DEQUEUE02
LCK_LIST_ALL02
LCK_LIST_SINGLE02
LCK_LIST_BY_AREA02
LCK_LIST_BY_OWNER02
LCK_LIST_BY_USER02
SAPSIM
SIM_SIMSESSION_CONTROL
SIM_SIMSESSION_COPY
SIM_SIMSESSION_SAVEAS
SIM_SIMSESSION_UNDO
SIM_SIMSESS_HAS_DELTAS
SIM_SIMSESSION_GET_DATA
SIM_SIMSESSION_GET_DELTAS
SIM_SIMSESSION_GET_ALL
SIM_SIMSESSION_GET_ACTIVE
SAPREP
REP_INIT
REP_CLOSE
REP_CHECK
REP_CHECK_MULTI
REP_ACKNOWLEDGE
REP_REVERT
REP_RETHEAD_READ
REP_RET_READ
REP_CAPA_CHANGE
REP_DEMAND_CHNG
REP_PLNVERS_READ
REP_PLVERS_READ
REP_TX_READ
REP_DELTAS_REORG
REP_CONSI_CHK
REP_DELPOS_DEL
REP_NEWPOS_DEL
REP_DELPOS_GET
REP_NEWPOS_GET
REP_REVERT_MULTI
REP_INST_DELETE
REP_INST_CREATE
REP_DEM_INIT_REC
REP_CHECK_EXIST
REP_TIMELINE_CRE
REP_INST_CHECK
REP_CHK_LOCK_GET
REP_CHK_LOCK_SET
REP_CHK_LOCK_DEL
REP_DELTA_DISP
REP_POSGUID_DISP
REP_CORR_QTY
REP_CHECK_NEW
REP_RESERVE_DEBUG
REP_ACKN_RES_FOR_TX_DEBUG
SAPRPM
RPM_ACTS_FOR_WORKCENTER
RPM_ADD_NODES
RPM_BF_CALC_ORDER_STATUS
RPM_BF_DELETE_ORDER_STATUS
RPM_BF_MODIFY_STATUS
RPM_BF_READ_ORDER_STATUS
RPM_CHG_R_ORD_CF
RPM_COPY_RES_ORD
RPM_CREATE_MATRIX
RPM_CUSTOMIZING_MODIFY
RPM_CUSTOMIZING_READ
RPM_DEL_RES
RPM_DEL_RES_ORD
RPM_DELETE_MATRIX
RPM_DELETE_ONE_CONFIG
RPM_MATRICES_FOR_CUOBJ
RPM_MATRICES_FOR_ORDID
RPM_MATRICES_FOR_ORDID_MUL
RPM_MATRICES_REORG
RPM_MATRIX_PROPERTIES
RPM_MATRIX_PROPS_UPDATE
RPM_MODIFY_CONFIGS
RPM_MODIFY_ONE_CONFIG
RPM_PARKED_ORDERS_READ_ALL
RPM_READ_A_R_ORD
RPM_READ_ALL_ACTIVITIES
RPM_READ_ALL_CONFIGS
RPM_READ_ALL_NODES
RPM_READ_ALL_ORDERS
RPM_READ_ALL_POSVARS
RPM_READ_ALL_RES
RPM_READ_ALL_TOKENS
RPM_READ_CONFIGS_W_TOKENS
RPM_READ_ONE_CONFIG
RPM_READ_ONE_ORDER
RPM_READ_ORDER_BOM
RPM_READ_ORDER_BOM_MUL
RPM_READ_ORDER_SEQUENCE
RPM_READ_ORDERS_FOR_POSVAR
RPM_READ_POS4RS1
RPM_READ_POS4RS2
RPM_READ_RES_ORD
RPM_READ_RES4POS
RPM_READ_ROW_BITS
RPM_REORG_HARD
RPM_REORG_PARKED_ORDERS
RPM_REORG_SOFT
RPM_REQS_FOR_MATERIAL_2
RPM_ROWIDS_FOR_WORKCENTER
RPM_SESSION_SWITCH
RPM_STORE_ACTIVITIES
RPM_STORE_ORDER_SEQUENCE
RPM_STORE_ORDERS
RPM_STORE_POSVARS
RPM_STORE_R_BITS
RPM_STORE_R_ORD
RPM_STORE_RESTR
RPM_STORE_TOKENS
RPM_TIME_LINES_CREATE
RPM_TIME_LINES_DELETE
RPM_TIME_LINES_READ
RPM_TRANSPOSE_PV_MATRIX
RPM_TRANSPOSE_TOKEN_MATRIX
RPM_TRANSPOSED_CONFIGS
RPM_UPDATE_ROW_BITS_TABLE
RPM_WRKCINFO_DELETE
RPM_WRKCINFO_MODIFY
RPM_WRKCINFO_READ
SAPTS
SAPTS_ADAPT_SEASONALITY
SAPTS_AGGMULT_TIMESERIES
SAPTS_AGGSINGLE_TIMESERIES
SAPTS_ASSOCIATE_CH
SAPTS_CALC_DATA
SAPTS_CALC_SNP_INFLOW
SAPTS_CHANGE_CH
SAPTS_CHANGE_FIX_DATA
SAPTS_CHANGE_KF
SAPTS_CHANGE_PT
SAPTS_CHANGE_RELMODE
SAPTS_CHANGE_SH
SAPTS_CHANGE_TG
SAPTS_CHRANGES_IN_AGG
SAPTS_CLEAN_OBJECTS
SAPTS_COMTEST
SAPTS_CONS_OBJECTS
SAPTS_COPY_DATA
SAPTS_CREATE_INCONS_OBJECTS
SAPTS_CREATE_NEW_LAYER
SAPTS_CREATE_REGISTER
SAPTS_CREATE_RELATION
SAPTS_CREATE_SNP_RELATION
SAPTS_CREATE_TIMESERIES
SAPTS_DELETE_KEZ_TS
SAPTS_DELETE_REGISTER
SAPTS_DELETE_RELATION
SAPTS_DELETE_SNP_RELATION
SAPTS_DELETE_TIMESERIES
SAPTS_EXTR_CH_GET
SAPTS_EXTR_CH_SET
SAPTS_EXTR_KF_GET
SAPTS_EXTR_KF_SET
SAPTS_EXTR_PT_GET
SAPTS_EXTR_PT_SET
SAPTS_EXTR_TG_GET
SAPTS_EXTR_TG_SET
SAPTS_EXTR_TSBUF_GET
SAPTS_EXTR_TSBUF_SET
SAPTS_EXTR_TSBUS_GET
SAPTS_EXTR_TSBUS_SET
SAPTS_EXTR_TSH_GET
SAPTS_EXTR_TSH_SET
SAPTS_EXTR_TSKF_GET
SAPTS_EXTR_TSKF_SET
SAPTS_EXTR_TSRLSNP_GET
SAPTS_EXTR_TSRLSNP_SET
SAPTS_EXTR_TSRL_GET
SAPTS_EXTR_TSRL_SET
SAPTS_EXTR_TS_GET
SAPTS_EXTR_TS_SET
SAPTS_GET_AGGREGATED_DATA
SAPTS_GET_AGGREGATED_DATA_RIW
SAPTS_GET_ALL_DATA
SAPTS_GET_ALL_DATA_RIW
SAPTS_GET_DATA
SAPTS_GET_DATA_RIW
SAPTS_GET_INITIAL_DATA
SAPTS_GET_REG_OBJECTS
SAPTS_GET_TS_INFO
SAPTS_GET_TS_INFO2
SAPTS_INITIALIZE_DATA
SAPTS_OBJECTS_BY_CHREF
SAPTS_OBJECTS_BY_KFREF
SAPTS_OBJECTS_BY_TGREF
SAPTS_OBJECTS_GET_ALL
SAPTS_OBJECTS_IN_AGG
SAPTS_OBJECTS_QUERY_STATE
SAPTS_QUERY_OBJECTS
SAPTS_READ_CH
SAPTS_READ_KF
SAPTS_READ_PT
SAPTS_READ_SH
SAPTS_READ_TG
SAPTS_REDISAGG_DATA
SAPTS_REGISTERS_GET
SAPTS_RELATIONS_GET
SAPTS_RELATION_GET_DETAIL
SAPTS_REPLACE_COMPLETE_TSKF
SAPTS_SET_DATA
SAPTS_SET_DATA_RIW
SAPTS_SET_INITIAL_DATA
SAPTS_SET_UNIT
SAPTS_TIMESERIES_GET
SAPTS_TRACE_FILTER
SAPTS_UPDATE_TIMESERIES
==================================
Installation successfully finished
==================================
Enable user LC1ADM
OK
OK
liveCache LC1 successfully started.
Mon 10/15/2007
03:00 AM
The Problem we face is before this problem happen we created planning version name 000 , when we open the product view system says planning version is not available
please advise me
Thanks
Raj
Similar Messages
-
ST22 timeout for all LC related transactions LIVE cache start stop working from LC10
Hi Team
we are a getting a ST22 timeout for all LC related transactions LIVE cache start stop working from LC10
LC version 7.9
OS AIX
SAP SCM 7
SDBVERIFY giving the following error
Checking package Redist Python
Checking package Loader
Checking package ODBC
Checking package Messages
Checking package JDBC
Checking package DB Analyzer
ERR: Failed
ERR: Checking installation "Legacy" failed
ERR: Group of directory /sapdb/data/config/install changed [0 =>
sdbregview -l is showing good.
any idea what might went wrong.
trying to use sdbverify -repair_permissions , but not sure about the exact syntax to use.
and it is not related to timeout parameter, we tested with different timeout values, but still the same error.
thanks
Kishore ChHello Kishore,
you could check the sizing of the liveCache data.
* Report /SAPAPO/TS_LCM_REORG_SNP has checks of the SNP planning areas for superfluous objects.
* Delete old/temporary APO data.
* /SAPAPO/TS_LCM_REORG report checked TS superfluous objects.
If you didn't create the planning versions, copy of planning versions & data load to liveCache, then create the SAP message to check your system on the question of the dataarea usage.
If you have the long running APO transactions => performance of the SCM system has to be checked.
If you have the bottleneck in liveCache & could not solve the case by yourself => create the SAP message to BC-DB-LVC and get SAP support.
Best regards, Natalia Khlopina -
Starting and Stopping an FMS Instance?
Hi there,
I'm sorry if this issue has already been answered somewhere else, but my Google skills are up to par and I was unable to find a documented resolution to this problem within the last few days. Opening a new topic was my last resort.
I am designing a live-streaming system for a client. We've been running an instance 24/7 for the last month and my client just received an enormous bill for that.
Basically we need to be able to start and stop the instance as needed. When I check the checkbox next to it in the Management Console and click on Instance Actions, Stop and Start are greyed out. I am allowed to Terminate and Reboot the instance, but I'd like to keep my same instance and simply turn it on and off in between live streams. I've read that the Start and Stop options are disabled because my instance is not stored on an EBS volume, and that running FMS on an EBS volume is not supported. Must I leave the instance running all the time in order to get around having to set it up each time I need it? Is there any sort of workaround or widely accepted answer for this?
Thanks again.Hi Smit,
I believe you are talking about FMS AWS instance and you may be using a centos 4.0.2 instance AMI or lower?
Well ... earlier, options for stopping a centos AWS image was not available, but recently they are there in place, so I suppose if you use a new centos 4.5.1 AMI then probably you can start stop the aws instance on yuor will. Give ut a shot and let me know.
Regards,
Shiraz Anwar
I again cross-checked and found that you were right, start and stop is not supported there .... an alternative method is to take a snapshots of the runinng instnace and terminate that instance after that, later you can use your snapshot to attach to the EBS volume to run your system again. You may need to use the Elastic IP address, because you wont like your users to update each time you terminate the old instance, and create new instance from snapshot. I have never used it in this way, but this is one of the approach. -
Starting and Stopping FMLE from command line yields corrupt .flv files
I am using FMLE to record and live stream TV content. In order to this I am remotely calling FMLEcmd in order to start and stop encoding processes. The problem that I am running in to is that the .flv files generated are corrupt. The odd thing is that if I use the exact same profile XML from the GUI, then the encoding process works just fine and results appear as intended.
Here is the way my workflow works:
I start the process by calling
FMLEcmd /p C:\lighttpd\htdocs\xml\default.xml /l C:\lighttpd\htdocs\logs\log.txt
then at the conclusion of the recording I call
FMLEcmd /s "C:\lighttpd\htdocs\files\default.flv"
When I attempt to open the files using FFmpeg I get a codec error saying that no codecs were detected. When I attempt to open the files in VLC I get a error saying that the media types are "Undf". When I attempt to open or modify the files with flvtool2 I get an end-of-file error. My guess is that my stop command is incorrect and somehow abruptly stopping the stream, but I don't know another way to stop the stream. Do I need to specify a specific stream duration in the XML and make sure to call the stop command *after* the duration has been reached? What would cause this codec corruption when the same profile works properly from the GUI?
Here is the profile I am attempting to use.
<?xml version="1.0" encoding="UTF-16"?>
<flashmedialiveencoder_profile>
<preset>
<name>Custom</name>
<description></description>
</preset>
<capture>
<video>
<device>Osprey-440 Video Device 1A</device>
<crossbar_input>0</crossbar_input>
<frame_rate>20.00</frame_rate>
<size>
<width>640</width>
<height>480</height>
</size>
</video>
<audio>
<device>SigmaTel Audio</device>
<crossbar_input>0</crossbar_input>
<sample_rate>22050</sample_rate>
<channels>1</channels>
<input_volume>75</input_volume>
</audio>
</capture>
<process>
<video>
<preserve_aspect></preserve_aspect>
<deinterlace></deinterlace>
</video>
</process>
<encode>
<video>
<format>VP6</format>
<datarate>650;</datarate>
<outputsize>640x480;</outputsize>
<advanced>
<keyframe_frequency>5 Seconds</keyframe_frequency>
<quality>Best Quality - Lower Framerate</quality>
<noise_reduction>None</noise_reduction>
<datarate_window>Medium</datarate_window>
<cpu_usage>Dedicated</cpu_usage>
</advanced>
<autoadjust>
<enable>false</enable>
<maxbuffersize>1</maxbuffersize>
<dropframes>
<enable>false</enable>
</dropframes>
<degradequality>
<enable>false</enable>
<minvideobitrate></minvideobitrate>
<preservepfq>false</preservepfq>
</degradequality>
</autoadjust>
</video>
<audio>
<format>MP3</format>
<datarate>48</datarate>
</audio>
</encode>
<restartinterval>
<days></days>
<hours></hours>
<minutes></minutes>
</restartinterval>
<reconnectinterval>
<attempts></attempts>
<interval></interval>
</reconnectinterval>
<output>
<file>
<limitbysize>
<enable>false</enable>
<size>10</size>
</limitbysize>
<limitbyduration>
<enable>false</enable>
<hours>0</hours>
<minutes>60</minutes>
</limitbyduration>
<path>C:\lighttpd\htdocs\files\default.flv</path>
</file>
</output>
<metadata>
<entry>
<key>author</key>
<value></value>
</entry>
<entry>
<key>copyright</key>
<value></value>
</entry>
<entry>
<key>description</key>
<value></value>
</entry>
<entry>
<key>keywords</key>
<value></value>
</entry>
<entry>
<key>rating</key>
<value></value>
</entry>
<entry>
<key>title</key>
<value></value>
</entry>
</metadata>
<preview>
<video>
<input>
<zoom>100%</zoom>
</input>
</video>
<audio></audio>
</preview>
<log>
<level>100</level>
<directory>C:\Documents and Settings\Administrator\My Documents\My Videos</directory>
</log>
</flashmedialiveencoder_profile>If issue of corrupt file after cmd line not in GUI mode. Are you using some automation to copy/paste output flv to someother location?
AFAIK, after placing stop command, FMLE took some time to write proper EOF in FLV. wait ~10 sec for FMLE to complete file writing process and than play in FLV PLayer.
I tried manually with steps you mentioned and it's working fine for me.I playerd file in Applian Flash PLayer. "http://www.applian.com/flvplayer/" -
Cmdline start and stop separate OC4J
Hi,
We are working with OAS 10.1.2.0.2 (J2EE and Web Cache)
On that OAS we have 7 OC4J's with different Webservices
Is it possible to start and stop a OC4J sepratly using commandline functionalitt without using "opmnctl stopall" and startall
Based on an event I just want to start and stop one component and not all components.
Maybe the answer is already given here but please help.
Hugo Perforsi found it in the manual
-
Using the spacebar for starting and stopping a clip does not work
Hi!
The spacebar for starting and stopping the playing of a clip in the viewer of a sequence in the timeline has a live of its own. Without changing any setings, it sometimes works, but mostly not. Is there a seeting, I have not figured out yet? While in a session with Final Cut Express, it does not change its behavior. It starts with a working or not working spacebar. The same applies to the arrows to go back and for a frame, or back and for a clip. If the spacebar does not work, the arrows do not work either.thanks everybody. But my spacebar and arrow keys still do not work.
As uggested, I deleted the preferences in the library (which is also what is suggested by fcpbook.com/Misc1.html)
I am used working with Final Cut for some time now. And just got myself a new iMac and the program. So everything is quite new. I did not change any settings so far.
The first 2 days everything was fine.
Then, one day, the spacebar and the arrow key stopped working. Not in the middle of a session, but when I started the FCE new. Inbetween, it worked for some time. Now, the spacebar is gone again.
It's just the function of playing the clip that does not work. In whatever window (timeline, viewer). The function of the spacebar to make a space (for example in te name of clip or in a text file) works fine.
I would not mind the spacebar that much, but I miss the arrow keys to go from frame to frame, or from clip. It's strange. -
Itunes is stuttering -starts and stops at random intervals
Hi there-
I have a 5yr old emac. I am running OSX 10.4.8 and itunes 7.02. I have not had any problems for 5 years,
Today my itunes started stuttering - it starts and stops at random intervals and it takes forever to start playing again, to shuffle songs, etc... I restarted and it did not help.
Can you advise me on what I could do next?
Thanks so much,
Kathleen in MinneapolisKathleen ~
It's possible it could be one of several or combination of many things. I'll list the potential problems, and ways to determine if you have the problem.
First off, restart and do not run any other applications when you run iTunes, and don't run any applications after iTunes is playing music? Does the problem go away? If so, you may not have enough physical RAM installed on your computer for uninterrupted playback. You can find out how much RAM you have installed by clicking on the blue apple icon in the upper left corner of your screen and selecting "About this Mac". The "Memory" line wil display how much physical RAM you have installed. If it is less than 512MB, you should consider getting more.
My second assumption is that you state you have had the computer for 5 years, it is posible that the hard drive (HD) is getting low on available space. Adding music, email, pictures, downloads, etc. over time erodes away at the available space on your HD. Typically on this vintage computer it likes to have at least 20% of HD free space to work relatively efficiently (this will vary based upon how large your HD is to begin with).
To find out how much HD space you have available, click on your HD icon on your desktop once, then press and hold the CMD (open Apple) key and press the "i" key. You will see two statistics, "Capacity:" and "Available:". If the amount of available space is less than 20% of your total HD space you may want to consider removing things from you HD, acchiving things, or optimizing you HD.
How often you repair permissions? I recommend at least once a month, and it's relatively easy and a quick thing to do. Go to your Applications->Utilities folder on your HD. There is an application called "Disk Utility", double click it. Select your HD volume in the upper left corner, then click the button "Repair Disk Permissions". Depending upon how many programs you have loaded this could take several minutes, be patient. When finished, if it fixed any permissions, run it again! Yep, twice, just to be certain, it can never hurt.
Also, while you're in that application, and done with repairing permissions, click the "Verify Disk" button. This may also take several minutes. When done it should report if it thinks your drive is ok, or not. If not, you need to repair it, and in order to do so, you need to boot from another drive (either another physical or logical drive), so that you can attempt to repair it.
If you have the purchased utilities such as Disk Warrior or TechTool Pro you can repair disk and directory problems, which could also be causing your problems. A free utility, such as Tiger Cache Cleaner has some utilities to clean caches, and run your nightly, weekly, and monthly processes that may also need to be run.
Chuck
PB Ti 1GHz - The last of it's kind Mac OS X (10.4.8) et al -
Hello,
I've been trying for a while now to get my PXI unit to capture a waveform between a Start and Stop (Reference) Trigger using the NI example DigitalStartAndStopTrigger.vi downloaded from the NI website. However, whilst the start trigger and stop trigger seem to be working i.e. the VI runs and stops at the correct times there is never any data read from my DAQmx compatible PXI-6120 card. So I can see the VI is running around the aquisition loop but the Property Node AvailSampPerChan is always returning zero... this has me slightly puzzled. I thought this might just be a driver issue so I've updated my box to the following software versions (see below) and installed the latest drivers e.g. DCDNov07.exe (also from the NI site) but nothing has changed.
my software as of now.
Labview 7.1 (with the 7.1.1 upgrade applied)
Max 4.3.0.49152
DAQmx 8.6.0f12
Trad DAQ 7.4.4f7
before I updated I had the same problem but with the following versions:
Labview 7.1 (with the 7.1.1 upgrade applied)
Max 4.2.1.3001
DAQmx 8.5.0f5
Trad DAQ 6.9.3f4
So to cut a long story short I still have the same problem with the triggers... does anybody have any ideas what is going wrong?
To add insult to injury it the traditional DAQ example ai_start-stop_d-trig.vi was almost working correctly before I did the upgrade. It had the strange behaviour of capturing the AI0 channel but on the wrong edges (e.g. if I set Start on Rise and Stop on Fall it would do the opposite, Start on Fall and Stop on Rise).
I'm going to leave my box doing a mass compile over night but i'd really like it if someone could suggest a solution or point me in the right direction.
Many thanks,
MikeHi Graham
I'm out of the lab today but I'll try and answer your questions as best I can...
1) What are the values you have set for Buffer size, Rate, samples per read and post trigger Samples?
At the moment I have all the values (e.g. sample rate, buffer size etc) unchanged apart from the ones I mentioned in my previous post (see above). I have in the past played around with changing the buffer sizes and rates in the example VI but as this appeared to have no effect on the behaviour I now have them setup as in the download.
2) Does the program end after the stop trigger is implemented?
Yep, if I toggle the trigger line high then low I see the program exits the read loop and the VI stops running as expected.
3) Lastly can you give me the details of triggering method. Are you
using a digital train of users set digital pulses? how long is the
program running.I'm using the WriteDigChan.vi to manually toggle the first digital line of the PXI-6733 card which is wired directly to PFI0 of the PXI-6120 card. Generally, I just start the VI running and then toggle the line high, wait a couple of seconds and then toggle it low.
To me it all looks like it should be acquiring samples but as I said yesterday it just refuses to fill the buffer with any data (and hence no samples are read).
Any ideas? and thanks for you help,
Mike -
I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.
You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O. -
Need help getting Tomcat 5.0.28 to start (and stop, eventually)
Hi!
I am such a newbie to the Terminal and writing scripts, so please forgive my naiveté. I have successfully installed Tomcat in my /usr/local directory, but I am having trouble creating files to start and stop Tomcat, per the instructions on the following page:
http://developer.apple.com/internet/java/tomcat1.html
I've followed the directions but continue to get the following error after I execute ~/bin/start_tomcat.
-bash: start_tomcat: command not found
My file contains the following code:
#!/bin/sh /n
export CATALINA_HOME=/usr/local/jakarta-tomcat-5.0.28 /n
export JAVA_HOME=/usr /n
$CATALINA_HOME/bin/startup.sh /n
If anyone can help me, I would really, really, really appreciate it!
Thanks!
PowerBook G4 12" Mac OS X (10.4.5)Why are there all those "/n" there? Either you or the place you copied from has the wrong slash. But still, it's wronger than that to have them at all: "\n" means a newline (i.e., press "return") not the actual "backslash en" characters. Sometimes people post code with those \n visible: by making it explicit where a line-break should be, one doesn't have as much trouble when a web browser reformats the text and puts line breaks where they don't belong.
-
Report on active sync actions (like starting and stopping the sync)
Is there a way to report on who stopped or started an active sync? I'm guessing it has to be stored somewhere, but I can't find it.
Thanks!Hi Smit,
I believe you are talking about FMS AWS instance and you may be using a centos 4.0.2 instance AMI or lower?
Well ... earlier, options for stopping a centos AWS image was not available, but recently they are there in place, so I suppose if you use a new centos 4.5.1 AMI then probably you can start stop the aws instance on yuor will. Give ut a shot and let me know.
Regards,
Shiraz Anwar
I again cross-checked and found that you were right, start and stop is not supported there .... an alternative method is to take a snapshots of the runinng instnace and terminate that instance after that, later you can use your snapshot to attach to the EBS volume to run your system again. You may need to use the Elastic IP address, because you wont like your users to update each time you terminate the old instance, and create new instance from snapshot. I have never used it in this way, but this is one of the approach. -
Music starts and stops during playback of burned DVD
I really need help with this problem...I made a slideshow and added music from itunes in the program IDVD. Once I burned the DVD the music will start and stop throughout the DVD and not at chapters as I read in other threads - but in random places on the DVD. The DVD sounds like it gets hung up and then starts again. This is my first project using IDVD, so any help would be great.
Debra,
Do your project have music purchased from iTunes? If so, that could be the cause of this problem. Music from iTunes is DRM-protected and can cause problems in playback. To take care of this, first burn all of your purchased music to a CD, then reimport in an aiff format. To do this, in iTunes, go to iTunes>Preferences>Advanced>Importing. Look for "Import using", and use the drop-down menu to select AIFF encoder.
Good luck. -
In Month View, showing start and stop times for appointments
Hi, I want to show both the start and stop times for all appointments in my iCal Month view and have not been able to figure out how to do that. Any suggestions? - Dave
I would also like to know how to do this if possible. I want to print month-view schedules with start and end times for events. Thought I'd bump this up to see if anyone has any ideas.
-
Printing event start and stop times
In month view, is there any way to have both the start and stop times for an event show when you print the calendar so you can see the duration of an event - thanks.
You might be able to use this script to reset the start/stop times to zero. Try with a small selection and see if it works for you.
http://dougscripts.com/itunes/scripts/ss.php?sp=batchtrimtime -
Start and stop a loop automatica​lly subtractin​g at each iteration
Hi there,
I know that there are some topics about it, but I could not find any solution, especially because I use the version 7.1 and cannot open new version files.
My problem is as follows:
I need to charge a tank from 6 to 10 in the morning, every day during 3 days. The process must start and stop automatically, which means, no bottoms to start or stop. The start and stop conditions come from the hour.
I start with a big loop of 72 iterations, which corresponds to 72 hours.
The tank must start at level 6 every time it starts.
After the start, 1 unit must be subtracted in each iteration. Which means, that at 6 am the tank has level 10, at 7 am level 9 and so on. In the end, at 10 am the tank level is equal to 2.
In the next day, the process must start again and the tank must start at level 6.
Any suggestions? Thanks in advance.
Solved!
Go to Solution.While this may work it can be improved significantly. This really isn't a state machine. This is basically the same as your flat sequence with the exception of using a While loop with a Case statement to implement each frame.
You should define what your actions are and create a typedefed ENUM naming them. State names of 1 through 24 are meaningless. Not to mention in your code many of the cases are duplicates of others. That would mean that all of those can be one state with logic to determine what action/state comes next. A properly defined state machine would not need the outside For loop. Without knowing your specific needs some examples of reason state names would be the following: Start, Stop, Exit, Error, Initialize, Get Tank Level, Fill Tank, Drain Tank, Idle, etc. Can you see how these are easier to understand than 1 through 24.
There are lots of examples of state machines here. Try a search and take a look at some of them.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot
Maybe you are looking for
-
Boot Camp 2.1 Update: Error, would not install
I tried to update my Boot Camp to 2.1. The reasoning being, that my dimmer button, my volume button, etc does not work on my Windows Vista Ultimate Side. Other short cut keys worked (i tried): ie: Print screen via 'fn'altF11, etc However, when I inst
-
Iphone for VGA Video Out not working
We have the Iphone/iPad VGA to Monitor connector. We tested it with 3 different iPhone 4 phones... It worked on 2 of them, but the 3rd woudn't work. What possible reason would it not work? The 3 phones had software of 4.3 and higher...
-
Adobe acrobat 9 pro 9.5.1
crashes and simply closes when you click "sign" or just after you locate and place signature landing pad
-
Best way to install a photosmart 5180 on new 8.1
What's the best way to install a Photosmart 5180 on a new 8.1 pc? I have the disc, but I don't think it'll work. Should I download the software and hook it up via USB cable or wireless. The pc is wireless, and I tried to find the printer on the netwo
-
Word opens up multiple documents continuously
in opening a word document- multiple documents appear -unable to close any of them