Live!Cam Video IM Pro - Audio Problem

Installation went normally and uneventfully (Windows XP SP3). I tried to do an AIM video chat session, I could hear the other person clearly, but he said the sound was very weak and breaking up on his end. Video was normal.
Is there somewhere I can adjust microphone setting to increase sensitivity of pickup?
Is there something else I should be looking at?
Thanks for your help.
Len

I too have the same problem. It seems to be a flaw with the software or the hardware. If you disable the auto exposure setting the frame rate will still site at 4-5 fps.
If you then move the exposure slider to the far left and then back to the right the frame rate will immediatley increase to 20-30 fps, but the exposure is quite poor even with the adjustment of brightness, contrast, etc. Is this a software bug or a hardware flaw?

Similar Messages

  • Live CAM Video IM Pro - Blue Screen (KS.SYS)

    Just purchased Live CAM Video IM Pro first creative product.
    My System: WinXP SP2, GB, Over 8 GB system space free.
    Installation went fine (no errors) post install requested reboot .. rebooted system. Blue Screen with KS.SYS.
    Uninstalled all software. re-installed with bare minimum. Troubleshooted the system multiple times. Finally got the culprit (Live Cam Video IM Pro driver).
    Without driver system works fine with drivers Blue Screen. Tried backup copy of KS.sys no success (seems KS.sys is dinged!)
    Result: The cam is useless.
    Any help is greatly appreciated.

    no one can help me? plz thx

  • 32 bit live cam video im pro vista dri

    I just purchased a li've cam video im pro and downloaded the vista 32 bit driver. I ran the setup and the files appear to be in the correct directory, but the "driver set-up" progress window stalls at 90%. I thought the installation might need the camera, so I plugged it in, but alas, to no avail. I've tried to install the camera 4 different times, but each time it goes all the way through the process and then freezes at 90%. I've doubled checked and I'm running a new install of Vista 32 bit on a ?new gateway computer. Anybody got any ideas?Pete

    no one can help me? plz thx

  • Unable to get Live Cam Video IM pro to work with MS Messenger

    I have installed Live Cam IM Pro and all software from CD, plus updates. It works if I try Cam Manager ... I see myself in preview window.Looking in Start - settings - control panel - scanners & camera there is only one entry, the Live Cam pro. I cannot get it to work with Windows Live Messenger .... if I initiate a video call, it rings but when far end answers ... I get video window with ... video loading message, but it fails and I just get a standard XP icon. If I go to Messenger .. tools ..audio & video the camera sparks into life and again I see myself in preview.But when I go to tools .. webcam settings I see the error message :Cannot change camera settings because your camera is not plugged in or you are using it in a video conversation or with another programIt is obviously plugged in, and there are no other programmes running. I have tried deinstall & reinstall ... no difference. I have removed CD extras .. so now just have Cam Manager & Video driver ... but still no joy.Anybody know how to fix this ?
    Message Edited by Catherina-CL on 02-12-2007 08:39 AM

    Bump, fixed the post.
    Cat

  • Live Cam Video IM Pro - Photo Capture Fails

    I can record video just fine w/the cam center software, but if I attempt to do a Photo Capture, get an error, "Cannot save photo..."? What's up w/that?

    Hi again, Ok I don't know what operating system that your using but I use vista home. I have sorted out the problem and heres how
    1 Uninstalled the software completly.
    2 Restart the pc.
    3 Reinstalled the software without the drivers.
    4 Pulled off vista drivers from creative list of update drivers.
    5 Restarted pc.
    6 Plugged in web cam and windows installed new driver.
    7 Openned up cam manager and hey presto it works.
    It took alot of messing around as I am a new user to vista after upgrading from xp, I hope this helps you to sort out your problem good luck

  • LIVE CAM VIDEO IM pro

    mysystem : pent IV , 2400 mhz ,52 MB ram -- usb2 - ADSL internet !!my question : i chat with skype and the " old " creative ( 460x260 ) minimum the last year -- WITHOUT ONE PROBLEM ---- YESTERDAY i take the NEW ONE from the shop and install ( 800x600 ) and the result :MAXIMAL 5-0 minutes ists work SUPER and than the pic was frozen ? could u give me a TIP for solution ? ( skype last version BETA 3.0.0.06 )thanks and regards from vienna gerhard

    Tobiasze,
    Here's the link to the quick start guide.
    This web camera does not have a built-in mic, you will need an external microphone. Chat software are easily available on their respecti've websites, all you need to do is just google search for it.

  • Creative Live Cam Video IM Pro & Kubuntu

    Are there linux drivers available for this web cam? Sure would be nice to be able to use it on something other than Windoze. Or am I just SOL? Thanks,
    Scott

    I am having the same problems. Were you able to find a resolution? Please email be at [email protected] thanks, Bruce

  • Live cam video im pro email servers trouble

    when i go to email a photo or video it only allowes me to go to outlook express and doesn't let me have the opion to use my yahoo email or even copy into a yahoo email can someone please help
    Message Edited by tlranger12 on 02-20-2009 02:03 PM
    Message Edited by tlranger12 on 02-20-2009 02:05 PM

    no one can help me? plz thx

  • Live! Cam Video IM Pro (VF0410) HELP!!!!

    i bought this webcam today - Live! Cam Video IM Pro (VF0410) - but i can't get it to show in black and white.
    Anybody who can help getting my webcam black and white?
    thank you!

    I too have the same problem. It seems to be a flaw with the software or the hardware. If you disable the auto exposure setting the frame rate will still site at 4-5 fps.
    If you then move the exposure slider to the far left and then back to the right the frame rate will immediatley increase to 20-30 fps, but the exposure is quite poor even with the adjustment of brightness, contrast, etc. Is this a software bug or a hardware flaw?

  • Drivers for Live! Cam Video IM Pro?

    Where can I find drivers for the Live! Cam Video IM Pro? It's not listed in the driver dropdown at http://us.creative.com/support/downloads/...

    Check again, the driver is available now ..... uploaded on 8 Jan 07.

  • Live! Cam Video IM Pro drivers, GET EM HERE

    Tada,
    The Li've! Cam Video IM Pro drivers :
    http://d.turboupload.com/d/428788/english.zip.html
    nomorecreative sent me the drivers and i'm posting them for you all here.
    enjoy, and creative, seriously, not that hard.

    Check again, the driver is available now ..... uploaded on 8 Jan 07.

  • Ios 7.1 Update Issue. Camera Video not capturing Audio

    Hello Every One, I have Updated ios 7.1 after the Update the Camera Video is not capturing the audio.Please help me with the SolutionIo

    Hi Aniruuthan,
    Thanks for visiting Apple Support Communities.
    If your iPhone is not recording sound along with video, I recommend these troubleshooting steps:
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
    Make sure none of the microphones is obstructed by dirt or debris.
    Turn the iPhone off and then on.
    If necessary, find general iPhone hardware troubleshooting suggestions.
    For further assistance, contact Apple Support.
    You can find the article with these steps here:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Best Regards,
    Jeremy

  • Live! Cam Video IM Pro VF0410 Frame Rate Problem

    Hello I'm from Turkey sorry for my English first. I bought this camera yesterday and i tried it on 2 PC.First one is using Win Vista Home Premium (4Gb RAM + Core 2 Duo E6750),second one is Win XP Home (Gb Ram + Pentium M .8). In these PC's i can't get more than 4 or 5 FPS. I only saw 8 FPS for one second. I downloaded the?latest drivers from the site which is v.0.0 (2.68 Mb).Nothing changed it is 4 FPS again.What can i do what is this problem. Is my camera faulty ?

    I too have the same problem. It seems to be a flaw with the software or the hardware. If you disable the auto exposure setting the frame rate will still site at 4-5 fps.
    If you then move the exposure slider to the far left and then back to the right the frame rate will immediatley increase to 20-30 fps, but the exposure is quite poor even with the adjustment of brightness, contrast, etc. Is this a software bug or a hardware flaw?

  • Cant install LIVE! Cam Video IM Pro

    I have a dell Dimension 8400.I purchased a brand new web cam and I can not
    install the software.
    It gets to approx 44-76% and freezes.
    I have tried several times.
    My OS is Windows XP Pro -version 2002,
    service pack 2. I have QUICKTIME 6.3 (only 7.0 and higher is reported a problem)
    Any suggestions? My warantee runs out soon.

    no one can help me? plz thx

  • Trouble using Creative's Live! Cam Video IM Pro

    I have just buy a new webcam and installer all that should be and upgrade.But in cam detector and Msn is my cam not with me when i move around , the pic be blurred and laggy.what can be wrong.what should i do to fix the problem?I have 2,40 GHz and 768 RAMin graphiccard i have Geforce 4 64MB

    no one can help me? plz thx

Maybe you are looking for

  • My latest subscription doesn't work!!!

    Hi There, I used up my first subscription and added another same subscription after that. But it looks like the new added subscription didn't work... Anyone can help me on this??? Orlando.

  • Cisco ISE URL Redirect Update

    I made a mistake configuring the domain-name on my ISE appliance.  I issued to the no ip domain-name and then added the domain-name I'd like to show up.  It seems to have partially worked, as the FQDN on the appliance is now correct but the redirect

  • Adapter configuration Failed when installing BODS 3.1

    Dear All, I am trying to install BODS 3.1  on windows 8 pro laptop and I have got an error,"Adapter configuration Failed" . What will be the issue? Regards, Kathir

  • Prices taken for BOm levels

    Hi, When we perform the cost roll up process (ck40n) how the prices will be taken in each level for BOM structure. Regards Mastan Reddy N

  • Desktop software version 6.0 won't sync with Curve 8310

    I adore my Blackberry Curve 8310, but the desktop software has been a nightmare.  I have tried to download new versions, but the only one that will sync with my device is the one that came on a disk with the phone, version 4.2.2, which I have in my d