Live! Cam Voice BETA Drivers and Widows Vista

I have just installed the BETA drivers for Live! Cam Voice and everything seems to have worked except that there appears to be a conflict with Microsoft Genuine Advantage and I am told that "There is a problem with your licence so notifications will no longer appear". The Error is 0xC004D40 described as "The security processor reported a system file mismatch error. I am asked to validate the product online. Validation takes me to Micorosft Genuine Advantage (a misnomer if ever there was one) where I am told that the "copy of Windows did not pass genuine validation. Either an unauthorised change was made to Windows files or a software preogram installed on this computer is not currently compatible with Windows Vista". That would not matter too much if as a by-product. I had not been prevented from updating my installation of Windows Vista, but I was and the only way round that was to start my computer with no programs running and update in such almost clean state. Thus I counsel everyone seeking to use the BETA drivers for Live! Cam Voice to be aware of the problems that they might encounter.

HELLO CREATIVE!!!
CAN YOU MAKE THIS CAMERA USEFUL?
NEED NEW DRIVER!

Similar Messages

Creative live cam voice help please

Help please,
We are using the "live cam voice" model, with our computer (Vista 32bit), that appears to work OK, but after a few minutes we get the BSOD! We have tried un installing and re-installing drivers without any effect.Has anyone had this problem and if so how did you fix it.
Regards,
Arthur

Thanks for your response. I have tried 3 ports so far, all with the same outcome. One of my sons had it happen to him on another computer (XP SP2) using this webcam . As to programmes open at the same time, I am not computer literate and have no idea what programmes were running on each occasion.We use the webcam for Skype and apart from that I may also have IE open and perhaps Outlook Express. Over and above those CS4 sometimes.
If I cannot resolve this, can any one suggest another webcam please.
Regards,
Arthur

Live Cam Voice requires restart after system sleep under Vista

I have attached my Live Cam Voice to my brandnew Vaio Notebook which runs Windows Vista Home Premium and installed the latest drivers from the Creative website. The cam works fine, until I put the laptop to sleep mode and waking it up again. After waking the PC up, the cam is not recognized anymore and I need to restart the computer.
Anybody experienced similar problems and (hopefully) has a solution? Thx.

Did you ever solve this problem? I have a similar problem on my desk top running Vista Home. I couldn't get the Vista driver (download from this wesite) to load so resorted to trying the XP dri've. This seemed to work until Vista put the machine into "Sleep" mode. After coming out of Sleep mode I eith have to restart the computer or disconnect and reconnect the webcam.

Live cam voice & msn messenger

I bought creative live cam voice and I cannot get it to work with WINDOWS LIVE MESSENGER as it always crashes and gives the error message "the program has stopped working". Im using vista 64 bit and all the latest drivers.
I did get it working for a short while with MSN 7.5 but microsoft now prevent that version being used and when you try and install it windows insists on downloading live messenger instead.
Help please

HELLO CREATIVE!!!
CAN YOU MAKE THIS CAMERA USEFUL?
NEED NEW DRIVER!

Live cam voice ......errr Help please

HI all,
I wish i never uninstalled my web cam....never had it working since.
I;ll put you all in the picture....Dell, Win XP Pro, SP3, and trying to install Live cam voice.....
Unfortuantely i think i have misalid !! the main CD it came with.
I have installed the drivers ( the most up to date ones 1.02.08.0710 ) and application package on the creative web site for XP.
The application seems to freeze, the web cam works, but when it tries to install the drivers, it halts for ages on the wdmaud.drv to c:\windows\system32.....is trying to install that driver section for over an hour now, if i disconnect the usb end ( which i will do now, it says its installed ok and finished ) but not not recognise the audio section. It shows up ok and fine on the video web cam, and also as i mention above the application seems to freeze adhock.
Advice given from ireland on the phone,
1) try tips from website ....like shut down anti virus and firewall etc ...done that no use !
2) uninstall, install the files from the CD
3) uninstall.... install from the web app and drivers ( which i have already done )
4) try from another PC...i have not got another PC!!!!!
Does anybody have any other tips...please help

Yeah, I hear ya! There is such a tremendous delay between sound and video that it looks like a bad kung-fu dub :womansad: I bought 5 of them for may office and they are horribly poorly synched. What's up?

Live! Cam Voice - Microphone compatibility w/ Windows Vista Ultimate

I recently got the Live! Cam Voice for my computer with Windows Vista Ultimate. And for some reason the built in microphone won't work at all - even the voice recorder, the Yahoo! Messenger in which it was built for and Windows Live Messenger. However the actual webcam works fine. Is there anyway to get the microphone to be compatible with Ultimate?

HELLO CREATIVE!!!
CAN YOU MAKE THIS CAMERA USEFUL?
NEED NEW DRIVER!

Live Cam Voice OR wireless connection; not both

My new Live! Cam Voice blocks my wireless Internet connection. The Webcam works fine for taking photos and making little videos. But if I'm online, and plug the Webcam into a USB port, my connection is cut and I cannot restore it. Unplug the Webcam and sometimes the connection comes back, or if not I have to restart my computer, and it comes back then.
A previous Logitech Webcam worked perfectly.
Any ideas?
K

Below was copied from a post by: cjasonwilson on this forum and Worked on my live!cam voice product.
***Note***
When I followed the direction on this I found only:
LowerFilters value inthe file - I deleted that and all is well in wonder land!
Thanks to Cjasonwilson for some great info, the only thing to work after 3 calls to creative, gatway and one of my buddies dack in FL. Thanks Again!
I found a fix that worked for me and I hope it works for anyone else experiencing the same issue. I had to Manually delete the UpperFilters and LowerFilters registry values.
To Manually delete the UpperFilters and LowerFilters registry values, follow these steps:
1. Start Registry Editor (Regedit.exe).
START > RUN > (Type) REGEDIT (and hit ENTER)
2. Locate the UpperFilters and LowerFilters value under the following key in the registry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{6BDDFC6-80F-D0-BEC7-08002BE2092F}
3. On the Edit menu, click Delete, and then click OK.
NEXT: I went to my Device Manager in Windows XP > IMAGING DEVICES > CREATIVE WEBCAM LIVE! ULTRA then right mouseclicked and chose DISABLE. I Then Right mouse clicked again and chose ENABLE. Then Wallah! My webcam led cam on and the darn thing started working again.
HOW I DISCOVERED WHAT TO DO
I came across a link to a similar problem regarding a CD-Rom Driver install issue returning Error Code 9. This was the same error code that I recieved when trying to re-install my webcam drivers. So I poked around the registry near a similar path (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class\) as mentioned in the article found at http://support.microsoft.com/kb/34060/EN-US/ until I ran across an entry that said Imaging Devices in it.

Live Cam Voice on HP DV8305 -- Video image very slow

I installed Live! Cam Voice on my HP DV8305 succussfully, it works, but the video image is very slow. it needs about 30sec to capture a frame, sometime just stucked. I changed the Display Adaptive Driver, used differrent USB IF, checked my CPU and Memery usage, my HD space, use differrent IM -- skype, MSN, .... Any one can help?

As further information, the issue seems to be with the exposure setting. When I turn auto exposure off, then set exposure down as low as it will go, the picture darkens, but the frame rate goes up. I don't have this problem with my Logitech QuickCam Orbit -- I'm not sure if the problem is with the firmware, or if the CMOS sensor in the Live! Cam Voice is just smaller.

SB Live! 5.1 Dell and Windows Vista Driv

Since the Sound Blaster Li've! 5. (digital) card included with Dell computers a few years ago are no longer supported by Creative, and since I now have Windows Vista 32-bit Ultimate edition, is there any way to get Creative drivers for it, or will I simply have to purchase the Creative Sound Blaster X-Fi Elite Pro card that I planned to buy for a new custom-built high-performance computer?Simply put: Are there any Creative-made drivers for Vista for the SB Li've! 5. cards?

Try using the kX drivers. Admittingly, I also use kX on my XP MCE2005 box because the Creative drivers hang during install on MCE2005. I've also tested it under Vista 32 and it appears to work (didn't stick to Vista 32 because it was problematic and lacked certain features i.e. What-U-Hear for me). Good luck!

Win 7 Crashes with Beta Drivers and Sound pack 2.0

? Hello Folks!
Just updated to Win 7 Ultimate x86, build 7600. Unfortunately I have no sound at all. I installed the Beta Driver released by Creative on July and it freezes my computer during the driver install.. and freezes the boot up process when I installed the drivers in safe mode.
I removed them.. now my system works fine. I gave a shot as well to the 2.0 pack from Daniel... everything works fine.. 'til it gets into the driver install... the system freezes on the process. I tried as well with safe mode.. and the boot process freezes.
I checked the log for Startup Repair.. and it reports a bad driver. SO again I removed them, and system boots fine with no probs, BUT still no sound.
Any ideas fellas.. someone with x86 7600 build, with sound working?! I forgot to add that I have an XtremeGamer Sound Card
Regards
Roberto

UPDATE
Changed the Sound Card to another PCI Port and worked fine. Now I'm using Daniel's driver set. Everything is going great at the moment.

Unable to Capture - Live Cam Voice - HELP!

Suddenly I cannot capture anymore - I can still take images, but when I click to record I get the following message:Unable to capture video. Please check that you have sufficient space on your hard drive and the following are setup correctlyVideo CompressorAudio CompressorI certainly have enough hard drive space. I uninstalled and reinstalled all the software and even then updated the drivers. Nothing seems to work.
All advice much appreciated. Thanks Giuseppe

Thanks! Messed around and seems I can no longer record in MWV format but its back working in AVI format...with no compression. I can then edit after if required. Thanks for coming back to me on this one..it is a Great Help when people respond! Regards Giuseppe

Live Cam Voice Camera Please help

when i try to record a video i get this message.unable to capture video.make sure the following are set correctly.video compressoraudio compressor. Any help would really be appreciated. i can not record a video or take a picture.

Is it only on Skype? Does the error occurs on other video-chat software?

Live! cam voice

I have a Live cam voice but im sad because it is vorking verry slowly.....i have update the driver but still vorking slow.....can someone help me...

yu right cam working veru slowly, but drivers for Win Vista is only BETA..... when creative creat new driver?PS ? ? ? ?.. ....
!!! ? 0 ?? 30!!! ? 640?480... ? 280... ?!!! ? ? ??!!!
Message Edited by Svartalf on 02-24-200802:57 PM

Live!cam Voice bad sound quality

I bought a live cam voice two days ago and have had to get it exchanged already due to the appalling sound and picture quality. The original cam would not allow over 640x480 resolution for video, the picture was dark and muddy, the exposure control did not work at all and the sound was dreadful. The exchange cam works perfectly ie 280x960 resolution, picture bright and clear, exposure works fine however the sound is no better. I have to use my headset/microphone for anybody to hear me on skype and if I use it for video capture the sound is distant, dull and overlaid by a constant succession of clicks and pops.
This is what people report hearing when I talk to them online. The camera is sold as having "unrivalled audio and video fidelity".Video yes (after exchange) audio definately not. I hope I will not have to get the second cam exchanged as if I do I will not be walking out with a Creative product. I have thoroughly checked my settings and carefully read the instructions and forum regarding this and have found no resolve. Anybody out there with the same issue?

I bought the Live! Cam Voice a few days ago and have been suffering from sound problems too when recording. The sound distortion is almost electrical/mechanical in nature but disappears when the video auto-balances and becomes brighter ?!?! IT also disappeared when connected via a USB . hub, although the system then griped that the port wasn't sufficiently fast.
I would consider swapping my main USB cable for the gold plated variety, to ensure no signals are encroaching on the port, but this may be overkill.
These findings would suggest a software issue rather than hardware.
Note. Do not install the voice driver update from Aug 2006, seems to make things noticeably worse!

New BETA drivers for TV@nywhere Master

there was a thread somewhere before where someone had found some updated BETA drivers for the MSI TV@nywhere Master card but it seems to have gone now
i've been using them for a while now, and they're very stable, and the picture quality has improved somewhat
they say they are for the Master version of the card, but i think they may work on the Mega PC version, the only difference is the Master has a AM/FM tuner as well
anyone having stability probs in media center III or MSIPVS might want to try them out and see what happens...
i've uploaded them to my webspace, and you can find them here in ZIP format: http://www.ukshazam.com/downloads/8606Master_drv.zip
please note these are BETA drivers and as such MSI won't support them (as if they do anyway
i'll also post this in the Mega PC forum

As I recall when this BETA driver started flying around the forum, they WERE NOT official or unofficial MSI drivers. They were modified by a user from another forum and someone from this forum posted a link to them. THESE ARE IN NO WAY RELATED TO MSI DIRECTLY!! Someone reversed engineered the driver and probly thru extensive testing, via trial and error, was able to clean up the driver to give the result that most have had with them. This doesn't mean that everyone is going to have the same result, which is and has been the reality with any add-on card produced since PC's came out...compatibility issues DO still exist out there and not all systems are going to play in the sandbox well with all add-on cards that are manufactured...something to keep in mind when purchasing new systems...
Furthermore, it's been my experience that proprietary systems (The Pac-10 as I call them...IBM, Dell, Gateway, HP, Compaq, Sony, eMachine, etc...) have more issues than White Box systems when it comes to add-on compatibility. If you don't know this already, most of these companies DO NOT want you to purchase off the shelf items from Best Buy, CompUSA, etc...they want you to have to come back to them for upgrades and add-on devices, at higher than retail prices, and that's where they make the most profit. Sad reality, but true. Case in point: My first retail purchased PC was a Dell XPS Pentium 100, (my prior PC's were purchased from Michael Dell's garage) I wanted to upgrade it to a 4X CDROM drive and Dell had failed to include the snap in side rails for their new innovative case that was tool-less. So I called up Dell support and asked if these rails were available. The CS Rep told me that they were so I asked how much. She asked me if I had bought the upgraded device from Dell and I said no. Then she informed me that they wouldn't sell them to me ($6.00 US) because I hadn't purchased the upgrade device from them. Needless to say I was pissed. This was circa 1995-96.
Anyway, over the years of doing network consulting, I can't tell you the countless times that I've heard this type of thing on the phone from many of the above listed companies...yes, most have gotten better over the years (Like Dell including all of the rails needed inside the case nowadays) but overall they still have the same mindset and it's much more subtle when they design a motherboard that won't play in the sandbox well with retail bought components...*shrugs*
I got tired of playing their game after a while and started building my own systems. I found White Box isn't always better either but for the most part it's been a far cry easier than buying proprietary...
Just my 2 cents here for what it's worth...

Live! Cam Voice BETA Drivers and Widows Vista

Similar Messages

Maybe you are looking for