Live capture with FCE 4 and Canon HV20 - End of Tape when capture in HD

I have a Canon HV20 HiDef video camera that was given to me to record an event. I want to try and avoid using the tapes if possible and capture the video directly into my MacBook Pro using FCE 4.
If I try and capture video when the camera is set to HD output, the capture screen comes up, I can see the image from the camera on the FCE4 screen for a split second, then I get a message indicating the end of tape has been encountered. (The tape isn't even being used and is no where near the end anyway).
If I change the camera to DV output, I can change the FCE4 Easy Setup to simple DV control and it works fine to capture live, except that it is no longer in HD. I get no error message about the tape end being hit.
I am unable to find any Easy Setup configuration that will allow me to record live. Any suggestions?
Thanks.

Play your tape forward to a position where there is continuous Timecode and try again.
As Ian suggests the correct _AIC Easy Setup_ is the only way to get HDV in to your Mac via FCE.
Note: Your camera must be set to output HDV assuming it recorded HDV.
Al

Similar Messages

FCE and Canon HV20/30

I'm about to upgrade my camera. Anyone hear or experience any problems with compatibility between the above cameras and FCE3.5HD?
Thanks.
ps Is it worth upgrading to FCE4?

Short and sweet, answers I like. I assume you've done good work with the HV20?

I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

FCE only used AIC for HD.
Al

My sound keeps turning off and then gonas back on and also its ending my calls when i got full sigal

Hi
could you please help me as my sound keeps turning off and then gonas back on and also its ending my calls when i got full sigal

Hi john00000001,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Cheers,
- Judy

Photoshop CS6 keeps crashing. I am using a brand new IMAC, I have 16GB RAM recently updated as it was running slow with 8GB and lots of hardrive space. When it crashes, i lose all my presents and it changes my preferences, it also fails to save or produce

Photoshop CS6 keeps crashing. I am using a brand new IMAC, I have 16GB RAM recently updated as it was running slow with 8GB and lots of hardrive space. When it crashes, i lose all my presents and it changes my preferences, it also fails to save or produce a recovered file despite settings asking it to do so every 5 mins now. When i try to report the problem, it says it has found an issue and gives me a link to a solution....but wont let me click on the link.... PLEASE HELP! It's killing my productivity.

If the crash started right after you added RAM, it could be a bad Ram dimm. You can try this - change the amount of RAM in Photoshop to 4G, this should stop Photoshop from using the higher ram. If it doesn't crash, it's probably the ram. Or run a diagnostic app. You don't say when it crashes, what you're doing when it crashes - it there a pattern? Did it ever work on this computer? Did it work on your previous computer? Without a lot of data, it could be related to the new computer... What OS version? Did you recently update it? Have you updated Photoshop to the most recent update?
Do you have any plug-ins loaded? Try restarting Photoshop, and immediately press & hold the shfit key to turn off plug-ins.

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

I am not able to download ITunes. I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don

I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don't see any thing else. Now not sure what else I have to do.
Thanks,
Ranjit

See the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2

Capturing with iMovie and importing into fce 4

Hi, everytime I try to capture mini dv footage from my Panasonic camcorder using final cut express, the transfer/capture crashes.
However, capturing using iMovie 08 gives me no problems at all.
Before I spend more time looking into the errors, if I capture using iMovie 08 and then import that into fce 4, am I losing any audio / video quality? I read somewhere that iMovie works off raw dv files - is this what would get imported into fce?
Note: I would import the iMovie project into fce and not be exporting first from iMovie and then importing into fce.
thanks

My video is on mini-DV. The camera I used to record was a panasonic ag-dvx100 PAL. I am using DV-PAL easy setup. I am playing back with a panasonic nv-ds30 camcorder (I rented the other one).
I have now managed to get past the dropped frames - that seemed to have been the test tape. I am now using a different tape, the actual tape i used for the footage. Now everytime I capture (using either mark in/out or capture now) the capture stops with a locating timecode and then breaks. I can't seem to capture it all in one go. This scene when I shot it was a single scene so there were no stops/pauses during the recording.
There seemed to be some discussion on this in the thread (http://discussions.apple.com/thread.jspa?messageID=4183209#4183209) but that was a different camera.
any help would be great.

Device control in FCE of Canon HV20

This question doesn't seem to be have answered very succinctly in other posts, though it seems to have been touched on.
I am trying to capture HDV footage into FCE from a Canon HV20 camera. I want to be able to log and capture the footage, but I can't seem to be able to use the log and capture function, as I cannot control the HV20 camera through FCE. Is this normal? I am able to do this fine in Final Cut Pro. Is there a reason why this would be different between the two apps??
Any help or plugins or just a "yeah, you're out of luck", would be much appreciated.

Hi Tom,
The original footage was recorded on a HDV tape. HV20 recording setup: HD STANDARD is "HDV", COMP OUT is "1080i".
My HV20 is connected via a DV cable (IEEE 1394) from the HDV/DV port to the Firewire 400 port on the back of the iMac. The only other connected component is the keyboard with a wireless mighty mouse. As for the HV20 setup, PLAYBACK STD is "HDV", COMP OUT is "1080i", DV OUTPUT is "HDV/DV". One thing I did notice, is that as soon as I connect the firewire to the HV20, PLAYBACK STD and DV OUTPUT are grayed out in the playback setup menu.
I'm using FCE 4.0 (pre-installed last week by Apple), set for HD, HDV Apple Intermediate Codec 1080i60, using "all rates". My scratch disk is defaulted to the iMac HD with over 450GB. When I then execute a capture, I first get prompted for a file name, then I get a black screen with the Apple logo in the center and the "Cueing Tape - press ESC..." msg while the HV20 tape begins to play. When this occurs, the HV20 LCD turns blue and the following text appears: PLAYBACK STD LOCKED, PLAYBACK IS RESTRICTED. Once I press ESC, the HV20 tape stops, the black screen disappears, and no capture files...
If I try a NTSC DV setting, I am able to capture from the HV20 - this said, as well as the fact that my iMac does recognize that I have a HV20 connected via the firewire port (see below), I am therefore assuming that my connection is correct and working properly.
Below are my current system settings:
*System Software Overview:*
System Version: Mac OS X 10.5.2 (9C31)
Kernel Version: Darwin 9.2.0
Boot Volume: Macintosh HD
Boot Mode: Normal
*Final Cut Express:*
Version: 4.0
Last Modified: 05/02/08 1:17 PM
Kind: Universal
Get Info String: Final Cut Express 4.0, Copyright © 2002-2007 Apple Inc.
Location: /Applications/Final Cut Express.app
*QuickTime Player:*
Version: 7.4.1
Last Modified: 13/02/08 7:42 AM
Kind: Universal
Get Info String: 7.4.1, Copyright © 1989-2008 Apple Inc. All Rights Reserved
Location: /Applications/QuickTime Player.app
*Hardware Overview:*
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B01
SMC Version: 1.21f4
Serial Number: QP806019ZCT
*FireWire Bus:*
Maximum Speed: Up to 800 Mb/sec
HV20:
Manufacturer: Canon
Model: 0x10
GUID: 0x8500014D0170
Maximum Speed: Up to 100 Mb/sec
Connection Speed: Up to 100 Mb/sec
Sub-units:
HV20 Unit:
Unit Software Version: 0x10001
Unit Spec ID: 0xA02D
*ATI Radeon HD 2600 Pro:*
Chipset Model: ATI,RadeonHD2600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x9583
Revision ID: 0x0000
ROM Revision: 113-B2250F-219
EFI Driver Version: 01.00.219
Displays:
iMac:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Built-In: Yes
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display Connector:
Status: No display connected
Intel ICH8-M AHCI:
Vendor: Intel
Product: ICH8-M AHCI
Speed: 3.0 Gigabit
Description: AHCI Version 1.10 Supported
*WDC WD5000AAKS-40YGA0:*
Capacity: 465.76 GB
Model: WDC WD5000AAKS-40YGA0
Revision: 58.01E02
Serial Number: WD-WCAS84640808
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
*Macintosh HD:*
Capacity: 465.44 GB
Available: 439.61 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Thanks for the help.
Buzz

Final Cut Studio 2 and Canon hv20

I'm currently working on Final Cut Studio 2 and I'm looking at buying a Canon HV20. I've looked into some threads on this one and it seems that people are having trouble with this camera on FC Studio 2. Is there anyone out there that can attest to smooth and efficient workflow with this set up? A major selling point for me is the 24p, tell me it works well, please tell me it works well.
thank you,
t r e y v o n

HV20 works perfectly at 24p in FCP 6.0.2.
Added advantage is that you can capture uncompressed (with HDMI card and fast drive/RAID) at much higher quality and resolution than HDV.
Quality is so good, you can create great 1920 x 1080 24p green screen shots (using 4:2:2 color space from HDMI) and dvMatte Pro 3.
The next step up to get better quality at 24p is around $5K-$6K range (I think?).
Here's a small image of a 24p frame shot on green screen with the HV20:
http://www.ecophones.com/embed/printplace.jpg

Which firewire cable for new MacBook Pro and Canon HV20?

I just bought a new MacBook Pro and want to transfer video from my Canon HV20 camcorder (using FinalCut Express). The Canon instructions say to use a "DV cable" and I've learned that the MacBook Pro only has an "800 fire wire" port. Can someone give me the exact type of cable that I should get (even my local Apple Store couldn't help me).
Thanks!

I'm surprised that the folks at the Apple Store couldn't guide you. You just need a firewire cable with the proper fw400 connector on one end and a fw800 connector on the other. Here's one source for both cables and adapters:
http://www.pccables.com/cgi-bin/orders6.cgi?id=ID7468267&rsite=google.comsearc&r code=&action=Cat&search=FIREWIRE

Adobe Photoshop Elements 7 - Comparison with Picasa and Canon Zoom Browser

I have recently bought a new computer and connected it to a USB hard drive which contained all my photos and a copy of an Adobe Photoshop Elements (APE) 4 catalog which permitted me to run APE 4 directly from the USB drive. The new computer runs on Windows 7 with Adobe Photoshop Elements 7. When I attempted to open the old catalog, created in APE 4 APE 4, APE 7 needed to convert it. The converted catalog then needed to reconnect with files and this took hours because APE seems to be incapable of sorting this out automatically. On the other hand Picasa 3 dealt with the matter in minutes and Canon Zoom Browser dealt with it in seconds. Why is this? What are the advantages of using APE 7 over Picasa 3 or Canon Zoom Browser?

John McQuade wrote:
I avoid keeping photos on the C Drive of my computer because of adverse past experiences of losing data when problems arose and it was necessary to reinstall Windows. I prefer to use two separate hard disc drives connected to my computer using USB ports so that I have all photos and catalogs on each drive. PSE catalogs appear to be drive letter specific so that a catalog created on one drive will not function if simply copied to the other. In PSE-4 I overcame this problem by opening the copied catalog and changing all references to drive letters. In PSE-7 I am unable to open the database and my goal is to find a quick and efficient way of modifying a copied catalog so that it functions on a drive different to the one on which the catalog was created.
Finally, and at long last, a kindred spirit that won't keep photos on the OS drive. I was told as recently as >> yesterday << that my post about saving photos anyplace else but "C:/" was "non-sequitur".
Second, I'm sort of accustomed to "USB drive", as a synonym for "flash drive", and "Ext HDD" referring to an external HDD, (this makes sense, at least in my twisted individual perception), so accordingly, I apologize for my knee-jerk lecture about it. (In hindsight, perhaps the only child in me is expecting too much also).
I never use external HDDs, but rather install additional HDDs internally to accomplish the same net result. My sensibilities here are, they are quite a bit less expensive, they do the same job, and you don't have addional s*** laying all over the place.
IMO, you are overthinking the database issue. I get to say that since I have no such ability to do so, and additionally, I have never been unable to reconnect a catalog other than within the normal Windows environment.
Therefore, I suggest changing the drive letter(s) to that of the old drive(s), and remain in blisslful ignorance as to whether PSE-7 is using the SN# or Drive letter to do its "dirty work".
As Mr. Ellis has pointed out, you're trying to do too many things at once. I'm going to suggest an "experimental" fix which is sort of backwards from Mr. Ellis', but retains the same spirit.
Install PSE-4 on the NEW machine! Insert its catalog file into its (PSE-4) correct folder. This location can be found by "Help" > "System Info".
Upon installation, PSE-4 will generate a new catalog, "My Catalog", therefore you must change the old catalog's name, (say "My Catalog 2"), to avoid a conflict.
You might have to change the "compatibility" mode for PSE-4 several times, before PSE-7 will be able to follow the file path.
As an additional note, since PSE-7 is technically, (according to Adobe), "incompatible", you can match its compatibility mode with PSE-4's, at the onset. After you have stabilized the system, change PSE-7's mode back to whatever works best.
If you need any more info on these operations, please feel free to post back.
I would like to add, that my PSE-7 in Windows 7 runs poorly in comparision with the same program in the XP environment. This seems not to be "typical", but IMO, worth mentioning.
Please also bear in mind that you can paste the entire catalog file into the "Open Catalog" dialog box, and PSE will place in its folder for you...!
Then, assuming the HDD letters are the same, it will reconnect "instantly", or in the case of a PSE-4 ".psa" cat file, PSE-7 will convert it, then open it instantly.
As an afterthought, by changing the drive letters, then pasting the .psa file into the "Catalog Open" dialog box, you do not have to make any additional installations of PSE, nor muck about in any database.

Quality and aspect ratio with FCE and iPhoto

Project started by importing hundreds of slides shot by different cameras with difference settings. Slides were imported into i-photo where I used the slideshow function to make several segments. As I was choosing the photos and dragging them into slideshows I cropped them all into 16x9 ratio so they would all be uniform. I then sent to QuickTime movie using the built in iPhoto export button and selected “custom export” setting with DV/DVCPRO-NTSC compression with quality set to “Best” and aspect ratio to 16x9.
Then imported into FCE and did serious editing (music, effects, titles, etc.). When finished I tried exporting as both a QT self-contained movie and QT conversion (using DV/DVCPRO and 16:9) but the quality is terrible and when I make a iDVD the picture is squeezed and distorted into a 4:3 ratio despite the fact that the IDVD is set to 16:9. I have spent over a month on this project and have fellow travelers waiting for my “creative” touch. Can anyone tell me where I went wrong on both aspect ratio and quality? Thanks.
PS: Am using MacBook Pro, OS 10.7.4 FCE 4.0.1 and iPhoto-11 9.3.2

Hi
I'm not shure - but I can share my thoughts
I tried exporting as both a QT self-contained movie and QT conversion (using DV/DVCPRO and 16:9)
I DO NEVER - Use Export as QuickTime CONVERSION
I DO - Share as QuickTime .mov - straight off
I had problems with 16x9 until I understood that
• I had to select type of project as WideScreen in FC
• Browser Window in FinalCut E and Pro - can extend far to the Right with several Columns. One Column states Anamorphic. When set my material to this. THEN introduced it into TimeLine. Can not be done in after hand.
• Export as above
• In iDVD there are TWO places to set 16x9
- When creating a NEW iDVD Project - SELECT --> WideSrceen
- In iDVD Project / Projectinfo [ Shift+cmd+I ]- ALSO set 16x9
Yours Bengt W

Live Recording with mics and Software Instruments

Has anyone used the Software Instruments in GB to play live, while recording the Software Instruments direct and live (Real Instruments) as well?
I'm thinking about getting a FirePod or similar, to record my band live using several mics and playing and recording Software Instruments all at once. I'm concerned that this set up might have too much latency and make the Software Instruments not playable with my band live, and perhaps all this might make my iMac G5 bog down.
Anyone have any experiences with any or all of this kind of use of GarageBand with an audio/MIDI interface?
iMac G5 20" Mac OS X (10.4.6)

Hey Hang,
Sorry if I'm talking in circles. That post was early!
I'd like to be able to use the built-in Software Instruments live and record that MIDI as well as the live tracks at the same time. However, I could deal with using my own keyboards for the live sounds and just record the MIDI from them while recording the live tracks too, if that makes the system work. For instance, if the part I wanted was a piano, and the Software Instrument piano used too much processor power, I could "record" with a smaller instrument that wasn't such a hog. Then, in mixing, I'd use the Software Instrument I wanted for the keyboard part. Live, my real keyboard could provide the piano for all to hear.
Am I making sense yet?
I suppose one thing I could do is something I was thinking of doing already. I could get one of the $40 MIDI-to-USB interfaces to record with the band. Right now, I'm just using a stereo mic set up to record stereo into GB. I could add MIDI and see what happens. Heck, I could enable 6 more real instrument tracks at the same time and see what happens! Then I would know it was possible on the iMac at least.

Can not capture with CS6 and blackmagic multibridge pro on HP Z820

This is the setup:
Z820 and Windows 7 pro
Multibridge Pro and driver 9.7.7
CS6.0.5
In premiere I can not capture via the Multibridge. The app crash when entering capture mode. I can not change setting in my capture device.
On the same PC I CAN capture with Media Composer v7 and BM Media Express.
I've tried several version of the BM driver, no changes.
The BM PCIe card is in slot 1 and the PC bios I have update to v3.50.
Anyone having the same experience?
Regards
Danny

Thanks for the reply. I know YouTube is not the way to check quality but it shows the stutter in playback. The quality wasn't the issue and it is filmed with my phone. The video shows what it needs to show.
Disk setup is a ddp server (check http://www.dynamicdrivepool.com/ for info) connected with 2 network cables for optimal speed.
Video cars is a NVIDIA Quadro K4000.
Premiere Pro CC is up to date with the latest version.
Export settings? I think you mean sequence settings:
For the record: I'm not trying to play a sequence with multiple layers of video of different codecs and loaded with effects. It's just a video chopped to pieces and an adjustment layer with some simple effects. The way Adobe is advertising the performance of Premiere Pro, one would think that couldn't be a problem for any Z820. Or that's what I was thinking. Hope you or anyone can help.

Live capture with FCE 4 and Canon HV20 - End of Tape when capture in HD

Similar Messages

Maybe you are looking for