Live Copy Properties not updating on Modify

Hi,
I'm creating a Mobile Site using the Live Copy feature.
I created a Live Copy, with a new MSM (triggered on Rollout), with "Edit Properties" that transforms the content resource type to my Mobile Components. Works Great!
I wanted the Mobile content (Live Copy) to be updated when the author updates the content. I tried creating a MSM which is triggered on "Modify" with the same Edit Properties.
What happens is that the updated content is copied but the Properties are not updated. i.e. the Live Copy site content reverts to the resourceType of the Blueprint Site ... Not Good!
We are using CQ5.5 without any Service Pack applied. It looks like this might be fixed with Service Pack 2.
http://dev.day.com/docs/en/cq/current/release_notes_service_pack_2.html
Is that correct?
Thanks

Just confirming that I tested this issue with the later version of CQ5.5, and it was fixed.

Similar Messages

Microsoft Live Tiles do not update

I have two different PC systems with Windows 8.1 (with all the updates).
In both systems the Microsoft live tiles "Mail", "People", "News", "Sports", "Food", "Health"
have the following issue:
Starting from a fresh installation they update as live tiles on the windows start screen.
BUT
when I click on them for the first time, I get into the app which works fine and after I close it, the tile stops being live. That is, if I click the tile it opens the app ok but then it stops
to update on the windows start screen.
The only solution that I have found is to uninstall and reintall the speciifec tiles again.
But even then the problem recycles. At first the live tile is OK and once I have entered the app and then closed it the live tile does not update.
Note that, of course, all live tiles are set to ON and that other tiles from Microsoft, such as "Weather" and "Stocks", or from other publishers such as Accuweather work and update without problems.
Any help appreciated.

Hello,
There could be many reasons for it. You need to make sure that your Local Disk is not full. If it is not then follow the given steps below to solve your problem.
1) Change your screen resolution to 1024x768.
2) Run windows 8 app troubleshooter, choose repair.
3) Unpin the apps, then pin them again
4) Restart.
I hope the above steps helps you. If you are success then you may restore your previous resolution again otherwise not required.
If the above steps don't help you then check:
http://helpdeskgeek.com/windows-8/fix-windows-8-live-tiles-updating/
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Aii properties not updated

Hi
I gave com.sap.aii.ib.client.login.languagesproperties in administration--> exchange profile but it is not getting updated,
would you please tell me the reason why it is not updated.

You would probably need to restart the system after changing this parameter.

3D Text color properties not updating on stage

I'm using a 3D Text object, and changing the color dyamically
via:
member("3D Text").diffuseColor = rgb(redVal, grnVal, bluVal)
(More complicated than that, but this is the simplified
version. I'm also
playing around with directionalColor, ambientColor, and
specularColor.)
At any rate, watching the color values in the Object
Inspector shows the
colors are indeed doing what I ask them to, but on the stage
it doesn't
reflect the changes. I've tried with or without Direct to
Stage, tried
using an UpdageStage() command every frame, tried setting the
sprite's loc
value to itself (to force a redraw), but nothing seems to
work. I can get
the colors to update by manually checking and unchecking the
DTS box in the
Property Inspector while the movie is running, so I know it's
doing the
color changes, just not displaying it unless forced to
redraw. How can I
force this redraw via script? I know I've done it before, but
it was a long
time (and several versions) ago, and I've since lost the code
to do it. Any
help here?

> You could try setting 'the stageColor = the stageColor'
but I don't know
> whether this will force a redraw of DTS sprites.
Nope, no dice. Doesn't matter if it's DTS or not. I just
found that
checking and unchecking DTS caused it to refresh. The same is
true if I
check/uncheck any other property - antialias, wordWrap,
editable, autoTab,
anything. But obviously, that doesn't help me much if I can't
find a way to
refresh it via scripts...

TS3276 Yahoo! sent mail not updated in the server.

I have an issue with Yahoo! Mail. When I'd sent email from my Mail from my mac book air, it can be sent but a copy is not updated in the server, thus when I view from the web or other device I can't see it as it is not updated. I've checked the "store sent msg in server" in the mail preference.
I don't this issue with exchange and gmail.
Thanks

Right that is how the POP email protocol works. If you want all mail sent and received to always be on the Mail Server then you have to use a mail provider that allows, uses, either IMAP or MS Exchange.

Database table not updating

Hi all,
I am updating the database table with following syntex, but table not updating.
MODIFY ZTEST_BAR FROM TABLE I_ZTESTBAR.
Please help.
PKB

Hi,
firstly you can define internal table and work area as below:-
internal tables
DATA : I_ZTESTBAR TYPE TABLE OF ZTEST_BAR.
work areas
DATA : I_ZTESTBAR_LINE LIKE LINE OF I_ZTESTBAR .
here internal table having the same structure as that of ztable which include MANDT.
Then to update field, you can use add following code:-
*Update Ztable
INSERT INTO ZTEST_BAR VALUES I_ZTESTBAR_LINE.
COMMIT WORK.
Hope this works for you.
Thanks..........

Folders last modified time stamp are not updated in Windows 7

After changing any .cpp file in Visual Studio, the last modified time stamp for the file's folder
IS NOT updated. What's happening ?
However when I change a Word (.docx) file, the last modified time stamp for the file's folder
IS updated ! How come ?

Hi,
If you thought this issue gets worse and if you have already set NtfsDisblesLastAccessUpdate to 0, then please revoke it to 1.
From the above Blog we can see that in Windows 7, the "Last Modified" field on log files is not updated when a program attempts to open the file or the utility is stopped, this is a design change to NTFS , becase we cache the metadata for
folder contents and do not refresh it until a handle is closed on an open file or an explicit call is made to retrieve the properties of an individual file.
Per your current issue that even if you closed these Vistual Studio files, the timestamp still didn't update. Please try the following and check whether any of them work:
- open the file in a second program
- view the proprties of the file
- "dir <filename>" at a command prompt
In addition, if you edit these Vistual Studio files with Notepad(Before doing that, please close all the programs include Vistual Studio) and try to reproduce the issue, does the issue still occur?
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Symbol Properties panel not updating or refreshing

Y'all,
I'm running FW CS5 under Windows 7 Pro (64-bit), and my Symbol Properties panel has stopped updating when I select a symbol to modify. I have to close and re-open the Symbol Properties panel to force it to refresh.
If I have the panel open and select a symbol on the page, the panel remains blank.
If I have edited a symbol then deselected it, that symbol's properties remain visible in the Symbol Properties panel after the symbol is deselected.
If I have edited a symbol then select another symbol, the first symbol's properties remain visible in the panel and it does not update to show the properties of the newly selected symbol.
In all cases I must close and re-open the Symbol properties panel to force it to refresh and update.
I've also noticed two other peculiar refresh problems lately - when the rulers are visible and I either zoom in / zoom out on the document or change the application window size, the top ruler often vanishes. I have to minimize then maximize the Fireworks application window to force a refresh and get the rulers to re-appear.
Finally, the little document info boxes at the lower right corner of the canvas showing document size and zoom level often go blank or vanish when I either zoom in / zoom out on the document or change the application window size. I have to minimize then maximize the Fireworks application window to force a refresh and get the info boxes to re-appear.
It seems that the problem may be related to some larger Fireworks screen refresh problem. It did not behave this way when first installed - it began happening recently, and the only thing that has changed was a minor update to all of the CS5 design tools (including FW) about the way that image metadata is handled.
Is anyone else experiencing odd refresh errors? Is it possible that an extension could cause this?
Any help and advice would be appreciated, because it has become really cumbersome to use component symbols.
Thanks,
Dave

After digging around and looking at what has been updated or installed on my computer since these weird refresh problems began, I may have identified a possible cause.
Adobe installs the Java runtime with the Creative Suite (I'm not sure why, but it's there), and a few weeks ago the 1.6.20 update installed itself, but it failed multiple times before installing, then Windows 7 informed me that a component was improperly installed with the incorrect privileges. Last night the 1.6.21 update installed itself without any errors, and this morning Fireworks seems to be working normally again.
I'll keep monitoring FW for weird refresh problems, and if they return I'll post an update. It is possible that the 1.6.20 update broke something that was fixed by the 1.6.21 update.
Can anyone tell me why the CS programs require Java and what it is used for?
Thanks,
Dave

Live bookmarks for BBC News will not update/load

Live bookmarks on my tool bar for BBC News will not update/load

We accidentally broke this, but it should be fixed shortly. You should not need to take any action... it will recover on its own within a day or so.
If you want to fix it yourself, you can edit the feed location to one that works. Right-click "Latest Headlines" and hit Properties. The Feed Location should be of the form:
http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml
(replace your locale... en-GB, es-ES, and so on)
There is a bugzilla bug on this as well, with a technical discussion of what happened: https://bugzilla.mozilla.org/show_bug.cgi?id=692035.

My i pad is not responding. I have a security copy in my iTunes. But my iTunes is not updated

My i pad is not responding. I have a security copy in my iTunes. But my iTunes is not updated. Will i lose my Security copy?

I have an iPad 1 as well that I updated when the iOS was first released a few weeks ago and I think that the new update really sparked my iPad into "new life" again. It's so hard to tell what will happen when you update - ideally the performance of the device should improve - and not fall off.
Have you tried closing any/all open/running apps in the recents tray? Close them all and restart - see what happens.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Smart playlists not updating live after 3.0 upgrade

I have a smart playlist: 'songs I've not played in a while'. Before the upgrade, if i had 100 songs in the playlist and played one, the playlist would update and the next time I'd access it I'd have 99 songs in it. however, after upgrading the playlist is not updating itself. It will stay at 100 songs and the only way to make it update itself is to sync with itunes. The placounts etc are all being remembered, but my playlist is no longer updating by itself.
Help! What can I do to fix this?

First, downgrading the firmware is not something that Apple will support, so if something does go wrong (not likely, but remotely possible) you could end up with a device that does not work.
Second, in order to downgrade to an earlier version of firmware, you have to already have it on your computer. If you never did a firmware update prior to installing 3.0, then you don't have a 2.x firmware on your computer to install. While you might be able to find a copy of 2.x, there have been reports of problems with the copies people are finding. But if you ever did a firmware update, say from 2.2 to 2.2.1 then you would have 2.2.1 on your computer already. If that's the case, then follow these instructions:
1- Connect your Touch to your computer and put it into "DFU mode" (Google that for instructions). Getting into DFU mode is a little tricky to get the timing just right, so pay attention to the instructions and what to look and listen for.
2- iTunes will tell you that the Touch needs to be restored to factory conditions (this is expected). Instead of clicking the Restore button, hold down the SHIFT key as you click Restore (on a Mac I think it's Option-Restore). You'll see a navigation window for you to locate the firmware. Navigate your way to where the firmware is stored on your computer, which on a PC is:
C:\Documents and Settings\(account name)\Application Data\Apple Computer\iTunes\iPod Software Updates
(on a Mac these files are located at: ~/Library/iTunes/iPhone Software Updates)
Select the proper .ipsw file for your device. For 2.2.1 the file is "iPod2,12.2.1_5H11aRestore.ipsw"
3- Your Touch will go through the Restore process. When you get to the point where you choose to re-load your last backup or set up the Touch as a new iPod, choose the new iPod selection since the backup contains 3.0-specific information that may not work with earlier firmware.
4- You'll then have to re-load your Touch's contents, including music, video, web links, settings preferences, etc.

Update or modify statment is not working in the method for workflow

hi friends,
i am facing with a problem.
one of my requiremetn is i need to update the ztable with update or modify statement in the method.
when i run by manually it is wokring fine(updating the ztable ) and binding every thing is fine. however the table is not updateing.
can you please let me know what i am missing.
Thanks in advance.
~ysr

Hello,
I understand you have to close some questions when you reach more than 10; if that wasn't the case then hardly anybody would ever close a thread.
What I'm saying is that you should give a more useful follow-up than "self". If your question was answered then say what the correct answer was. If it wasn't answered then say that.
The purpose here is to share knowledge, not just solve your problems.
regards
Rick Bakker
hanabi technology

Custom propertie's values are not updated for workflow metadata

Hi,
I've a requirement where I need to add and update some properties. to /etc/workflow/instance/<Instancename>/data/metadata node.
I've two workflow Process steps,
Process step 1:
    Adds some properties to metadata.
Process step 2:
    Updates the propertie's values which are added in Process step 1.
But the issue is update is not working when the node is /etc/workflow/instance/<Instancename>/data/metadata.
i.e. In the step 1, Properties are added to metadata node but In the step 2 propertie's values are not updated to the same node.
Here is my process code:
=================================================
import java.util.Locale;
import java.util.StringTokenizer;
import javax.jcr.Node;
import javax.jcr.Session;
import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Properties;
import org.apache.felix.scr.annotations.Property;
import org.apache.felix.scr.annotations.Reference;
import org.apache.felix.scr.annotations.Service;
import org.osgi.framework.Constants;
import javax.jcr.Value;
import com.adobe.granite.workflow.WorkflowException;
import com.adobe.granite.workflow.WorkflowSession;
import com.adobe.granite.workflow.exec.WorkItem;
import com.adobe.granite.workflow.metadata.MetaDataMap;
import com.adobe.granite.workflow.exec.WorkflowProcess;
import com.adobe.granite.workflow.model.WorkflowModel;
import org.apache.sling.api.resource.ResourceResolver;
import org.apache.sling.api.resource.ResourceResolverFactory;
import org.apache.sling.jcr.resource.JcrResourceUtil;
import org.apache.sling.api.resource.PersistableValueMap;
import org.apache.sling.api.resource.PersistenceException;
import org.apache.sling.api.resource.Resource;
@Component
@Service
@Properties({
       @Property(name = Constants.SERVICE_DESCRIPTION, value = "Test"),
       @Property(name = Constants.SERVICE_VENDOR, value = "Adobe"),
       @Property(name = "process.label", value = "Test 1")})
public class Test1 implements WorkflowProcess
    @Reference
    private ResourceResolverFactory resourceResolverFactory;
          public void execute(WorkItem workItem, WorkflowSession wfsession, MetaDataMap metadata)
                              throws WorkflowException {
                    System.out.println("Testing");
        try{
            ResourceResolver resolver;
            resolver = resourceResolverFactory.getAdministrativeResourceResolver(null);
            String instancePath = workItem.getWorkflow().getId();
            Node instanceNode=null;
            Session jcrSession = wfsession.adaptTo(Session.class);
           String payload = (String) workItem.getWorkflowData().getPayload();
           //instanceNode=JcrResourceUtil.createPath(payload+"/jcr:content", "nt:resource","nt:resource", jcrSession, true);
                              instanceNode=JcrResourceUtil.createPath(instancePath+"/data/metaData", "nt:resource","nt:resource", jcrSession, true);
                              System.out.println("Test: instance PAth:"+instanceNode.getPath());
            Resource resource = resolver.getResource(instanceNode.getPath());
                if(resource != null)
                    PersistableValueMap valueMap= resource.adaptTo(PersistableValueMap.class);
                    valueMap.put("name", "Rajesh");
                    valueMap.put("id", "A002");
                    valueMap.put("designation","SE");
                    valueMap.save();
                    System.out.println("Name:"+valueMap.get("name"));
                    System.out.println("Id:"+valueMap.get("id"));
            jcrSession.save();
            resolver.close();
        }catch(Exception e)
            System.out.println("Exception:"+e.getMessage());
===================
The code works fine when the node is payload/jcr:content.
Note : Process 1 and Process 2 code is same expect the values I'm passing to the PersistableValueMap.
Any pointers would be more helpful..
Thanks
Siva

Is there anything wrong in my code/ it's a bug..
Thanks
Siva

Live Smart Playlists still not updating?

One of the things I had my fingers crossed for more than anything else with the update to iOS5 was that Apple would have finally remembered that the iPod (and by extension the iPhone) started life as a music player and that they would have fixed the bug with smart playlists not updating on the device, so meaning you have to rely on syncing with iTunes on the computer to get it to update. But unfortunately my smart playlists still don't seem to be working. Has anybody found a work around to this?

Every time they update their iOS or iTunes, I complain about it, and each time I (falsely) believe that they will do something about it!
Apparently not with the latest updates (iTunes 10.6 and iOS5.1).
One work-around is to uncheck Live Updating for the smart playlists you want to sync, and recheck it when you no longer want to sync it, or to update it between syncs.
Hope this helps

I can not update OS X mavericks, my macbook OS X lion 10.7.5, when i install that show me This copy of the Install OS X Mavericks application, my brother can upgrade with internet that just me can do that

i can not update OS X mavericks, my macbook OS X lion 10.7.5, when i install that show me This copy of the Install OS X Mavericks application, my brother can upgrade with internet that just me can do that

Is your MacBook compatible with Mavericks? Open  > About this Mac > More Info, and you will see the MacBook model you have got. Then, check in this site if it's supported > http://www.apple.com/osx/specs
If your Mac is not compatible, OS X 10.7.5 is the most recent version for your Mac. Also, copy the whole message you see when you open the Mavericks installer

Live Copy Properties not updating on Modify

Similar Messages

Maybe you are looking for