Live Corners - Can't move smaller objects

Anyone else have a hard time moving smaller sized objects without adjusting the corners or distorting the shape of the object? Its driving me nuts.
Is there a short key or something that temporarily deactivates the live corner function so you can move the object?
Thanks.

View > Hide corner widgets

Similar Messages

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

Can't move an object with arrow keys - CS3

In Fash CS3, suddenly, in certain files, I can't move an object left using arrow keys - but I can move the same object right, or if I hold down Shift + left arrow, it works correctly
Also - I can move the object down with arrow keys, but not up
Workaround - move an object on a different layer, then return to the problem object and it moves correctly. But this doesn't last long, the problem resurfaces.
Does anyone have a solution for this? (I've tried rebooting; tried copying all the layers into a new file - no help.)

Now, working in the same file, I just clicked on a stroke and it changed the stroke from a smooth curve to angular lines.
I suspect this file is corrupt. Any thoughts on how to salvage the weeks of work that have gone into it? Every version of this file has the same issues.
Thanks for any help.

I can't move any objects or paste into text boxes on InDesign CS5.5

I have tried to move objects that I have placed or created in InDesign and can't move them at all. Also, I can't paste what text I have copied into a text box.
I'm using InDesign CS5.5 and on a Mac with OS X10.6.

Sounds like one of three things:
Objects are on the master page, Objects are locked and you haven't change the prefs to allow you to select them (but not move them), or objects are on a locked layer.

Can you move an object in a spark panel?

I have an empty spark panel that I add two object to. After I add them, I want to perform a move operation to split them apart over a duration. It seems that my move operation has no effect.
My panel declration is as follows:
<s:Panel id="nodeExplorer" backgroundColor="0xFFFFFF" creationComplete="hidePanelHeader(event)" height="100%">
          <s:layout>
               <s:VerticalLayout>
                    <s:verticalAlign>middle</s:verticalAlign>
                    <s:gap>0</s:gap>
               </s:VerticalLayout>
          </s:layout>
          <s:Group id="explorerGroup">
          </s:Group>
     </s:Panel>
My add and move function look like the following:
public function exploreNode(image:Image):void {
     image.parent.removeChild(image);
     var topImage:BitmapImage = new BitmapImage();
     topImage.source=(new P7TopImage() as Bitmap).bitmapData;
     var bottomImage:BitmapImage = new BitmapImage();
     bottomImage.source=(new P7BottomImage() as Bitmap).bitmapData;
     nodeExplorer.addElement(topImage);
     nodeExplorer.addElement(bottomImage);
     var parallelMove:Parallel = new Parallel();
     var topMove:Move = new Move(topImage);
     topMove.yBy=-50;
     var bottomMove:Move = new Move(bottomImage);
     bottomMove.yBy=50;
     parallelMove.children = [topMove,bottomMove];
     parallelMove.duration = 4000;
     parallelMove.play();
Any idea on how I can make those images move?

I would guess the layout of the panel is forcing them back
try it with basic layout
Most definitly.
I assumed he was adding to the Group without a layout. I guess I should learn to read more carefully.

Please help. New CS 4 error: can't move the objects. the requested transformation would make some objects fall completely off the drawing area.

I know this is not a "new" error message, but I have never gotten it on any previous version of Illustrator. I just upgraded to CS 4 and now get it on virtually every file when I try to nudge an object in any direction. Not that it should matter, but these are files that were created in earlier versions of Illustrator and I never had this problem. I have followed instructions from similar posts to no avail. I have zoomed way out to the edge of the art board: there are no hidden layers, objects, or guidelines, no lingering points from erased guidelines, or objects of any sort anywhere near the edge of the art board (which, I know, is enormous compared to the size of my working 11 x 17 document.)
What am I missing?
Also, on occasion, when I CAN nudge an object (usually a JPG or PDF image that I placed in the document), the image just disappears. I think it is still "there" though I cannot see it. Any suggestions?

I am nudging it by selecting the object and hitting the up, down, or side arrows. Dragging with the mouse works fine, but does not give me the precision I'm looking for. Dragging with the mouse also avoids the "disappearing PDF/JPG" problem.
I don't know what plug-ins I have. Possibly none.
I don't use clipping masks. But I did select one object (and then ultimately selected all objects) and went to clipping mask, the "release" function was not active, so I am assuming there are no clipping masks in the document.
I did attempt to select stray points, nada.
I have not tried getting rid of the settings folder. Not sure how to do that?
Also not sure how to take a screen shot to show you. I can tell you that there is only one layer and it is a very simple document with just a JPG image, a few objects and some text.
Sorry! I hope this helps you help me, I normally just use a few simple tools to produce some basic documents.

[AS] How can I move an object, specifically a Text Frame with Applescript?

I'm converting some old Quark 8 scripts that we used to use for pagination over to Indesign and I'm stuck on how to move one of my elements.
This is the WORKING script in Quark 8, which uses the "Origin" command.
set origin of bounds of Ad_Box to {Position_Height, Position_Width}
Is there a quick and easy way to do this in InDesign CS5? I've been searching Google and these forums and have had no luck.
I played around with the Set geometric bounds function, but had no luck.
Thanks!

move Ad_Box to {Position_Height,Position_Width}

"can't move objects because they would fall off the drawing area" Why?!

Hi, I'm trying to move a pdf object exported from vectorworks and i get the following error message: "Can't move the objects. The following transformation would make some objects fall completely off the drawing area."
It's not the first time this has happened to me but I usually find a way to get around it. I tried increasing the page size, pasting it into a new bigger document, am i missing something?
thanks!

The drawing area is the entire surface available for drawing, and is much larger than the artboard. There are probably objects or unlocked guides that run to the edge of the drawing area.
Unlock all objects and layers, then select all. Turn on Show Bounding Box and zoom out. The edge of the bounding box show the edge of the selected objects Explore the perimeter and delete anything at the edges that's causing the problem.

Can't move Object.

I keep getting this Error Message when i try and move something i have pasted into CS5.1.
"Can't Move the objects. The Command was Canceled" . It isn't locked. It's the only thing on
the layer ( the layer isn't locked nor the image ).

If it was created using a specific plug-in, it may carry incompatible plug-in data, even after the appearance has been expanded. If you haven't, at least try expanding the artwork. For anything beyond that you would have to take that up with the vendor or update your software to work in CS5.
Mylenium

Can only move object one axis at a time in PageMake 5

I must have hit some sort of short cut. I can only move an object one way at a time. Also rectangle tool only draws squares. Any help is appreciated. TIA

Thank you for the reply. Yes it is a old version and using an old Op system, Win98. Doesn't make it useless but will add a lot of extra time. Won't let me move object freely, only one direction at a time. Also won't draw rectangles or ovals. Not sure if I put some constraint on by accident. Thanks again for the help.

Can't move imported and embedded pdf

I have the following pdf what was created with Wolfram Mathematica 8:
https://cdn.anonfiles.com/1350042951313.pdf
When I import it in Adobe Illustrator (CS5.5 on mac), embed it, and tren try to move it, I get the following error message:
"Can't move the objects. The requested transformation would make some objects too large"
Would anybody know what the problem could be?
Thanks!

Try turning off the preview and zooming out as far as you can go.
Select All and look for stray points, clipping masks and other stuff that might cause this.

[CS6] How can I move shapes (created with paths)?

[CS6]
I created shapes with the pen tool.
Then I selected the path selection tool and selected a path.
Clicked right mouse key, choosed "Fill Path..." or "Fill Subpath"
(don't know what it means). After filling with a color I get an object in
the form of the path and I can move the path to another place.
But I can't move the object in the shape of the path.
I can't move it with "Path selection tool" because it's no path.
Then I tried the "Move Tool" but I also can't select the object with it
instead the whole canvas is moving.
How can I select and move shapes which were
created with the pen tool?

You've drawn a Path then filled a region of a pixel layer.
To make Shape layers, use the Pen Tool in "Shape" mode set in the Options bar.
If you really do want to draw a Path and use it to create moveable pixel shape then do the fill with an empty layer targeted.

How do I move/duplicate small objects without CC 2014 live corners getting in the way!?

Hi folks,
I'm finding a problem with live corners on the recent Illustrator CC2014 update...
Live Corners used to be a feature of the direct selection tool but now its on both types of selector as default... Much as I love live corners and use it all the time, its now impossible (or really bloody awkward) to move or duplicate (with holding alt and dragging) small rectangles. E.g if I wanted to duplicate out lots of small windows in a building for example. It just grabs a corner and makes its a circle. Zooming in gets around this but it doesn't really solve the problem. I'm also aware that you can turn the live corners off entirely but if I had to do that every time I needed it, we may as well go back to the days of effect>stylise>round corners.
Anyone else come across this new frustration or have a work around?
Tom
http://www.tomnapperdesign.co.uk

> @KrisHunt it's under View>Hide Corner Widget.
Oh, I thought you were talking about the gigantic corner handles, and being able to completely disable live rectangles. The internal rounded corner handles are not a problem for me because they are eternally hidden (via that very menu command) unless I specifically select one or more corners with the direct selection tool, which makes sense.

My live corners widget doesn't work, how can i fix it ?

my live corners widget doesn't work, how can i fix it ?

jotapepea,
You may have a look at the list below. The easy ones are at the top.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Can't move objects from layer to layer

Hi all,
I have been using illustrator for years and only now happened upon this issue. When I try to move on object or text from one layer to another, I a red "Not allowed to do" symbol, to the right side, within that layer.
How can I correct this issue?
Many thanks,
NT

Gary
The objects that I am trying to move, are plane black line drawings, no fills. Every time I drag the small color box (in the layers pallet)from one layer to the next, I get the red cirle with a diagonal line through it. This symbol appears where the layer color should be. The layers are not locked. Thank you for any help you can give me.
NT

Live Corners - Can't move smaller objects

Similar Messages

Maybe you are looking for