Live Drive II help please

Li've Dri've II help pleases I bought a SB Li've 5. and a Li've Dri've II several years ago.
I recently tried to add the LD II to my current system.
I am using a Audigy 2 Gamer ZS in my system.
I can not seem to get the LD II to work (I'm trying to get audio imported through the RCA jacks to rip to MP3 from vinyl).
I think my problem is that I am missing the Li'veWare disk that originally came with the LD.
I've looked everywhere on the creative site and I can not find Li'veWare to download. Nor can I find anywhere to even call a tech support number to talk to creative about getting another disk containing the Li'veWare drivers.
I am running WinXP and could use any help or suggestions, since I'd really love to convert some of my old albums to MP3 so that I can listen to them again.
Thanks,
Paul

KwanTai,
The Li've! Dri've II is not compatible with the Audigy 2. Changes in the card required that changes be made to the interface between the card and dri've.
Jeremy

Similar Messages

My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please.

My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please?

It can be the bridge. It could need firmware update. or the FW ports may be an issue. LaCie seemed to invent the phrase/tip 'resetting firewire ports' due to the issues with their drive cases.
You can try an SMC Reset.
So far I have avoided name-brand and tend to see them mentioned. Often with a new OS (though you are on 10.6.8, but when 10.6 came out there was a common complaint and thread of users: FW or USB worked but not the other interface).

Creative live cam voice help please

Help please,
We are using the "live cam voice" model, with our computer (Vista 32bit), that appears to work OK, but after a few minutes we get the BSOD! We have tried un installing and re-installing drivers without any effect.Has anyone had this problem and if so how did you fix it.
Regards,
Arthur

Thanks for your response. I have tried 3 ports so far, all with the same outcome. One of my sons had it happen to him on another computer (XP SP2) using this webcam . As to programmes open at the same time, I am not computer literate and have no idea what programmes were running on each occasion.We use the webcam for Skype and apart from that I may also have IE open and perhaps Outlook Express. Over and above those CS4 sometimes.
If I cannot resolve this, can any one suggest another webcam please.
Regards,
Arthur

HT1338 I was backing up my MacBook with Time Machine on my new (correctly formatted) external hard drive. It was going fine when my 2 yo knocked the hard drive. Now TM said "failed" and the Mac refuses to recognize the external hard drive. Help please?

I was backing up my MacBook with Time Machine and using my new (correctly formatted) external hard drive. All was going well when my 2 yo knocked the disk leading to a "failure" by time machine (Latest Backup: Failed). Now the MacBook will not even recognize the hard drive. I have rebooted, tried all I can think of, but no acknowledgement of the drive. The drive itself makes noise and vibrates as if working, but nothing from the Mac. Please help or $100 down the drain... Thank you.

You may have already done these resets in the "tried all I can think of " portion of your post.....if not then here they are.....
PRAM
support.apple.com/kb/HT1379
SMC
support.apple.com/kb/HT3964
.....hopefully that is all that is required.....

Apple Macbook Pro Hard Drive Repair Help Please

Cause of the mistake, i was being dumb and wanted to use my backup timemachine drive for an external drive, so I dragged the timemachine folder out of it and tried to empty the trash can, half way through I realized that it was trying to wipe my whole back up of my computer which would have been forever. So I panic, force shut off the computer, disconnect the drive and restarted the computer. My drive says 200 gb free when I know there is 400 left. So obviously the trash files are still around in my hard drive.
Did a disk verify and there is something wrong and the computer wants me to reboot and use repair upon rebooting the mac. I haven't done this in a while so I'm not sure if it's expecting me to have a backup from time machine.... the one i just fatally "deleted" or if it gets rid of the trashed files. Can someone help me please before I lose A LOT of work.
Update : And let's say I did need a back up, then if I just backed it up right now, with the missing but still taking up space files, would I still get those files in the back up or no?

As I understand it, you can't fix a failing SMART status. Believe me I tried on my iBook! I was originally under the impression that DiskWarrior and Tech Tool Pro could fix anything, but I now understand that they and Disk Utility can only repair the directory. As it was explained to me, SMART was set up to give warning of hard drive failure so that you could rescue your data before the hard drive dies altogether. You can disable it I think, but that's like putting black tape over the warning light in your car that lights up if you are running out of oil--possible to do, but not a good idea.
So if your SMART status is failing, then the only cure is to replace the hard drive. The hard drive can work for a while, but it's on its way out.
Here's a little background information on SMART status:
http://www.computerhope.com/issues/ch000184.htm
And I hope this was just a rhetorical question!

ITunes Movies - Hard Drive Crash Help Please

My hard drive crashed which had lots of precious movies of Michael Brecker playing live. Michael Brecker died last weekend and I don't want to loose the videos.
The movies are on my iPod. I'm afraid that when I sync iTunes to my new hard drive which contains a brand new install of XP-Pro and iTunes that it will dump the movies. I have researched online and found solutions for my music and photos, but none for my movies. iCloner and CopyPod allowed me to upload my songs and photos, but I don't see any options for movies.
Device: 80gb iPod
Thanks,
JazzMessenger!

i dont have an answer for your movies, but i was wondering if you could help me as my hardrive crashed also. I have a little 1gb nano. well, actually, we have two using the same music library. how do i get my music from my ipod to my new computer?
thanks

Flash Drive Unreadable - HELP PLEASE!!

"The disk you inserted was not readable by this computer." Story of my life.
I have a 32gb Micro Center brand flash drive. It's completely full of pictures, videos, documents, and files. Every time I stick it into my Macbook Pro, it tells me its unreadable. It gives me three options: Initialize, Ignore, Eject. I don't want to mess around with anything until I know what's wrong and what I should do. I've tried putting my flash drive into PCs, but it's still unreadable. I always remove my devices safely so I'm not sure what the problem is. The flash drive is in excellent condition. Maybe if anyone knows how to talk me through the Initialize option, that'd be helpful, cause frankly, I don't know much about softwares and such.
I've heard of people sending out there flash drives and getting them fixed. Is this an options? I'd only do it if it was guaranteed to work without losing any files. Is there anyway I can troubleshoot it at home and fix this?
I will be checking this post often to reply to any questions or answers. It's urgent that I access my flash drive!

Initializing it will format it and you will definitely lose everything if it isn't lost already.
Not being readable on either a PC or Mac is a bad sign.
It may be worth taking it into MicroCenter and see if they have any ideas. Most recovery services are rather expensive and Google is your friend in finding such a service.

Can't access hard drive. Help please!

I have a MacBook Pro that used Lion. The computer's software crashed and wouldn't start up, so I took it to my local Apple repair store to get it fixed. They said they could pull all my files and data from my computer, since the hard drive was fine, and that they would reinstall it on my hard drive when they reset my computer. When I got my computer back and when through the initial set up and start up steps, I selected the option to retrieve data from a disk on my computer. My computer spent seven hours just searching for the disk, so I finally decided to ignore the data that's supposedly located somewhere on my computer, and just set the machine up again.
I set up my computer and realized that the Apple repair store reset or reinstalled Snow Leopard instead of Lion. I'm not sure how much a difference the OS makes, but now Migration Assistant can't find the other disk in my hard drive that has all my old data on it.
I'm in a country that doesn't have actual Apple stores or Apple support systems in place, so it'd be great if someone could help me! This post isn't very clear because I couldn't quite tell what the repair people did, so feel free to ask questions to elucidate some of my more confusing or inaccurate statements.

Reinstall Lion:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
If the above isn't possible because the Recovery HD is no longer there, then you can go to the App Store and re-download Lion (if you purchased it on the App Store.) You will first need to update Snow Leopard to 10.6.8 by installing Mac OS X 10.6.8 Update Combo v1.1.
I suspect your files are simply on the drive, not on another drive unless they repartitioned the drive and put your files on the new partition. But if they just put your files back on the hard drive there is no need to use Migration Assistant.

I need to change the hard drive, some help please ?

My sister's G3 iBook hard drive seems to have died. She want me to replace it for her. My question, where can I get a replacement ? I know drives come in different capacities, 10, 20, 250Gigs's etc. But are all notebook drives the same physical size ? So can I buy any make to fit in the iBook, or do I have to get one from Apple ? I'm not 'IT', but work in medical physics, so getting my hands 'dirty' is not the problem.

Well, John, I have all sorts of links for places to buy hard drives here in the U.S., but I'm not sure they would be of any help to you. You need a "Super Slim" (9.5 mm high) 2.5 inch notebook drive. You don't have to buy it from Apple. You will need to format it with the original system CD's.
Here are a couple links, so you can print out the lists and shop locally:
Other World Computing
Newegg
Online instructions:
http://www.pbfixit.com/Guide/50.12.0.html
http://www.powerbooktech.com/knowledge,name-Hard-Drive,type-6.htm
Good luck.

Dead Hard Drive? Help Please!

A friend came to me with a PowerBook G4 12" saying that he was working on it under 10.2, when suddenly "white text" filled the screen. After shutting the computer down and attempting to restart, the computer seemed dead in the water. I have tried the following things to see if I could fix the box:
1.) Used a Mac OSX boot Cd to check installation
2.) Used DiskWarrior to check the directory
The issue is that DiskWarrior and the Mac OSX cd cannot even find a drive to install the software on. The only thing that I have seen on the laptop is a home folder entitled "root". Please let me know if you have any ideas on how to fix this. Hard drive may be dead...
PowerBook G4 12" Mac OS X (10.2.x)

Welcome to Apple Discussions, ScottyP39.
Your guess is probably correct - it does sound ominously like the hard drive is dead.
However, it may still be worth trying to use FireWire Target Disk Mode to see if the drive can be seen from another FW-equipped Mac. Alternatively, if there is a bootable cloned-backup on an external FW drive, then try using that to restart the PowerBook.
15 1.25G/12 1G PBs, Mac minis, iBooks G3/G4, Mac OS X (10.4.3) Cube, TAMs, iPods 2G/4G, iPs, AEBS, AX

I can't connect to X-box live anymore! Help please!

I've had xbox live since Sunday and it's worked fine since then. I'm using a Linksys WRT54G with Microsoft's own wireless adapter. When I first got it hooked up, I was using WEP and the xbox live lady on the phone told me to use my phone number for that code and it connected right away after some power cycling. Well, this morning I went to connect and it wasn't working at all. It get's to the IP address and fails. I called xbox live on the phone again and they told me to use a WPA code that I got off my computer. So after half and hour and more power cycling, it connected and after I hung up the phone with the lady, it became unconnected again. Ok, obviously I'm not the smartest person when it comes to this stuff so I REALLY need some guidance on how I should do this. Should I be using WEP or WPA and why can't I stay connected?

Acces setup page of router .....
Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live.

DVD drive problem; Help please!

Hello!
I just bought a Toshiba laptop a few days ago and it has been working great, except today as soon as I turned on the laptop, the DVD drive opened and now it wont stay closed. Once I closed it, it popped open a few seconds later.
Does anyone know how to fix this problem? Does anyone know why it's happening? Thank you!
Write what must not be forgotten

Thanks for your help, guys!
Well, my DVD drive closes now. Should I still return it though? Or call Toshiba tech support?
I bought it online, so I didn't really get any warranty.
Write what must not be forgotten

I just got a new MacBook Pro, and I tried to bring across my files from my last mac using time machine. After it was done copying I can't find my files anywhere but the space (about 130gb) has been used on my hard drive. Help please!!

I just got a new MacBook Pro, and I tried to bring across my files from my last mac using time machine. After it was done copying I can't find my files anywhere but the space (about 130gb) has been used on my hard drive. Does anyone know how I can get to them? I did change my user name from 'user' while it was copying, could this have something to do with it?

You don't want to do that by copying.
Your best bet, by far, is to use Setup Assistant. If your Mac is running Snow Leopard, see Using Setup Assistant on Snow Leopard or Leopard.
If it came with Lion, it's a bit different: Using Setup Assistant on Lion

I made a dumb decision to 'Erase Free Space' on my drive. I now have no free space, I realize because it wrote 0's over all my free space. Is there a way to undo this??? Help please I can't save any documents now! Thanks in advance all, it is truly apprec

I made a dumb decision to 'Erase Free Space' on my drive. I now have no free space, I realize because it wrote 0's over all my free space. Is there a way to undo this??? Help please I can't save any documents now! Thanks in advance all, it is truly appreciated. how can find the hidden temporary files using the terminal what do i type in?

It's more likely a failed Erase Free Space, which creates a huge temporary file; that's why it looks like you have no more available drive space. You can recover from this. See these links
https://discussions.apple.com/message/10938738#10938738
http://www.macgeekery.com/tips/quickie/recovering_from_a_failed_secure_erase_fre e_space
Post back if you need any help with this.

Apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?

Live Drive II help please

Similar Messages

Maybe you are looking for