Live Drive IR issue with Mic2 in

I hook my guitar through an effects processor then into the mic2 input of the Li've Dri've. I would hear the guitar through my computer speakers as I was playing. I would use the mic2 input to record a track, then use the "what I hear" option to overdub. Everything was great..... Now I can no longer hear my guitar though my speakers as I play. I'm still in mic2, I can record just fine. I just cant hear it as I am recording. When I play back what I recorded It sounds fine. It seems I have lost the "Li've" out of my Li've Dri've. I checked every setting I can think of in the sound mixer, volume controls, muted and unmuted things, checked all the knobs on the Li've Dri've.... I just cant figure out why it doesn't work anymore....if i plug headphones in I still cant hear as I am recording. Any help would be appreciated!

I got it working again. I downloaded the Li'veDrvPack.exe from http://www.fileshack.com/file.x?fid=544?ran that, then I could not unmute my mic2 input, I had previously saw in the creative forums a post with the mic2 mute problem and it was an issue with quicktime interfering at start up. I used msconfig to stop the Quicktime service from starting, can now unmute mic2. Tested mic2 with my guitar...rock on. Thanks tboyblu, I guess something did change or got corrupted and loading the li'vedrvpack resolved the issue.

Similar Messages

I would like to buy a developer license to use on a mac at a public library from a flash drive any issue with this?

I would like to buy a developer license to use on a mac at a public library from a flash drive any issue with this? Very new to this

The license is for the Developer not the machine it is run on However there could be soma issues with trying to develop on a public machine.
The biggest is does the library machine have or will they let you install and run Xcode and if you are developing for IOS will they let you plug in your devices?
In addition will they allow you the hours needed on the machine? Most public machines have a time limit especially if there are others waiting to use it.
All-in-all in can be done but it won;t be an easy situation.
good luck

2008 R2: OS(systemState/C: Drive) backup issues with VSS - 0x80042316 & 0x81080101 & 0x80080005 & 2155348001

Hi-
Looked thru the thread related to my questions and found nothing that applies yet.
Example:
http://social.technet.microsoft.com/Forums/en-US/4e4472b9-8e6f-4fdc-a287-1cc8c0f6de09/windows-2008-r2-backup-fails-with-event-521-error-code-2155348001?forum=windowsbackup
http://social.technet.microsoft.com/Forums/en-US/e8c910f7-f0dd-4613-beae-b98894fb6f23/windows-server-2008-std-backup-fails-constantly-with-error-code-2155348001?forum=windowsbackup
Here are details of the issues....
Backup - OS error - system image:
External disk - USB
Mon - Fri @ 6PM.
Windows SystemState
OS(C:)
Last backup failure...
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
[Critical error WINIMAGE_UNABLE_VSS] Unable to create VSS snapshot
- Additional information: Refer to the log for more details
- Troubleshooting link:
http://kb.backupassist.com/errormap.php?BA2512
The backup operation stopped before completing.
Detailed error: ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-12-08-2014_04-41-00.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-12-08-2014_04-41-00.log
NOTE:
The errors logs are not there?
Windows Backup timed-out before the shared protection point was created.
ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Event Viewer Log:
Sequence of Events...
1.
The Block Level Backup Engine service has successfully started.
2.
Backup operation that started...
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          8/12/2014 4:51:06 AM
Event ID:      521
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      mdnfile.Auxiant.local
Description:
The backup operation that started at '?2014?-?08?-?12T09:41:00.492000000Z' has failed because the
Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed
with following error code '2155348001'.
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
--> Suggestion are to check Virus scanner or consult DPM forum...
3.
OS Job failed with errors...( Backup Assist is 3rd party backup - wrapper round Wbadmin/Win Backup)
Log Name:      Application
Source:        BackupAssist
Date:          8/12/2014 4:51:51 AM
Event ID:      5634
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
Backup job OS backup failed with errors.
Critical error: Unable to create VSS snapshot
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
4.
Backup Assist reports via Win backup - Snapshot in progress
Log Name:      Application
Source:        BackupAssist
Date:          8/12/2014 4:52:20 AM
Event ID:      5634
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
Backup job Data backup failed with errors.
Ultra critical error: Volume Shadow Copy Error 0x80042316 - snapshot set in progress
Destination: Local directory
Start time: 8/12/2014 4:52:10 AM
End time: 8/12/2014 4:52:12 AM
Duration: 00:00:02.7300000
5.
The Block Level Backup Engine service has stopped.
6.
Later...we tried manually stopping VSS and SWPRV services - only VSS had the issue.
WBengine was not running...
C:\>sc stop swprv
SERVICE_NAME: swprv
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 3 STOP_PENDING
                                (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\>sc query swprv
SERVICE_NAME: swprv
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 1 STOPPED
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\>sc query wbengine
SERVICE_NAME: wbengine
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 1 STOPPED
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\>sc query vss
SERVICE_NAME: vss
        TYPE               : 10 WIN32_OWN_PROCESS
        STATE              : 3 STOP_PENDING
                                (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\>sc stop vss
[SC] ControlService FAILED 1061:
The service cannot accept control messages at this time.
Log Name:      Application
Source:        VSS
Date:          8/12/2014 9:20:33 AM
Event ID:      8225
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
The VSS service is shutting down due to shutdown event from the Service Control Manager.
7.
VSS still having issues here...not stopping!
Log Name:      Application
Source:        VSS
Date:          8/12/2014 9:42:33 AM
Event ID:      11
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service information:
The COM Server with CLSID {e579ab5f-1cc4-44b4-bed9-de0991ff0623} and name IVssCoordinatorEx2 cannot be started.
Most likely the CPU is under heavy load. [0x80080005, Server execution failed]
8.
Not sure why this is started again?
Plus a DCOM timeout...
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          8/12/2014 9:31:13 AM
Event ID:      753
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:      mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has successfully started.
Event Xml:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          8/12/2014 9:31:43 AM
Event ID:      10010
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
The server {E579AB5F-1CC4-44B4-BED9-DE0991FF0623} did not register with DCOM within the required timeout.
9.
Lots more errors about VSS...repeating Event ID's 11 and 8193...
Log Name:      Application
Source:        VSS
Date:          8/12/2014 9:42:33 AM
Event ID:      8193
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance.
hr = 0x80080005, Server execution failed
. Operation:
   Instantiating VSS server
10.
Then, finally stopping again...
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          8/12/2014 9:51:13 AM
Event ID:      754
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:      mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has stopped.
11.
And still repeating 11 & 8193 at this point...as we write up this post.
12.
This was suggested by the Backup Assist - software vendor....
A.)
...for 0x81080101:
"ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try again this operation."
If you receive the above error in your report, we have recently found a registry key which
contains the timeout value set by Microsoft for VSS and found that you can edit this to extend it.
To get to the registry key, open Regedit (Start > Run > Regedit) and browse to:
"HKLM\Software\\Microsoft\\Windows NT\\CurrentVersion\\SPP\\CreateTimeout".
Change value to 1200000 (2*10*60*1000 = 20 mins).
The default for the timeout period is 10 mins so hopefully doubling this will give enough time to
complete the snapshot.
If this isn't present, you'll need to manually enter the registry key. It's a DWORD 32-bit key.
--> NOTE: HAve not done this yet.
B.)
And for 0x80080005...
http://support.microsoft.com/kb/870655/en-gb
Our server does have high CPU load at times...
13.
Another post from technet mentions system volume size - here is our layout below:
A.)
OS/system Disk...
DISKPART> list disk
Disk ### Status         Size     Free     Dyn Gpt
Disk 0    Online          278 GB      0 B    (System Vol = C: Drive - OS w/ Programs and batch jobs)
Disk 1    Online         2791 GB      0 B        *    (Data drive - DFS, rsync,etc. run on D: Drive)
Disk 2    Online         1863 GB      0 B    (USB 2/3.0 - Enclosure w/ SATA disk = 2GB formatted w/ NTFS.)
DISKPART> detail disk
DELL PERC H710P SCSI Disk Device
Disk ID: CA0DEEA5
Type   : RAID
Status : Online
Path   : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0100)#PCI(0000)#RAID(P01T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 1         RECOVERY     NTFS   Partition   3072 MB Healthy    System
Volume 2     C   OS           NTFS   Partition    275 GB Healthy    Boot
B.)
Backup disk...
ST320006 41AS USB Device
Disk ID: 801AF48C
Type   : USB
Status : Online
Path   : 0
Target : 0
LUN ID : 0
Location Path : UNAVAILABLE
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label        Fs     Type        Size     Status     Info
Volume 4     F   BACKUPS      NTFS   Partition   1863 GB Healthy
C.)
NOTE:
Also on disk 0(system Disk) - we have a small OEM partition = 39MB and a Recovery Partition = 3GB.
D.)
Issues with WBAdmin now...
C:\>wbadmin get disks
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x80042302)
A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
14.
Ran "Check-Disk" -no errors...
C:\>chkdsk
The type of the file system is NTFS.
The volume is in use by another process. Chkdsk
might report errors when no corruption is present.
Volume label is OS.
WARNING! F parameter not specified.
Running CHKDSK in read-only mode.
CHKDSK is verifying files (stage 1 of 3)...
116224 file records processed.
File verification completed.
654 large file records processed.
0 bad file records processed.
0 EA records processed.
76 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 3)...
156676 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
CHKDSK is verifying security descriptors (stage 3 of 3)...
116224 file SDs/SIDs processed.
Security descriptor verification completed.
20227 data files processed.
CHKDSK is verifying Usn Journal...
35628352 USN bytes processed.
Usn Journal verification completed.
Windows has checked the file system and found no problems.
289233919 KB total disk space.
100241492 KB in 85477 files.
     57380 KB in 20228 indexes.
         0 KB in bad sectors.
    226627 KB in use by the system.
     65536 KB occupied by the log file.
188708420 KB available on disk.
      4096 bytes in each allocation unit.
72308479 total allocation units on disk.
47177105 allocation units available on disk.
15.
There are no backup error logs here - only .etl files...
C:\Windows\Logs\WindowsServerBackup\
Wbadmin.1.etl = 9:42AM on 8/12
Wbadmin.2.etl = 4:51AM on 8/12
Per windows Win troubleshooting:
http://technet.microsoft.com/en-us/library/ee692290(WS.10).aspx
http://blogs.technet.com/b/filecab/archive/2009/09/16/diagnosing-failures-in-windows-server-backup-part-1-vss-spp-errors.aspx
--> Related to Windows backup and not VSS?
2155348001 - 0x80780021 - Windows Backup timed-out before the shared protection point was created.
Should we run the "FIXVSS08.BAT" script - restarts services and re-registers DLL's - does this ever help?
Will this server need a reboot since VSS is in a state and we can't even test backups?
Is there a tool we can use to debug VSS or troubleshoot or OS backups further?
MSReport/Diag, VSS debugging, or another way of helping fix our OS(SystemState/C: drive) backup issues?
Any help is greatly appreciated - thx.
-SP
Scot Pichelman

Hi Scot,
Sometimes a third party backup application will change the default VSS provider adding VSS writers which causes Windows Server Backup using an incorrect component in doing backup, that's why I suggest to delete it for a test. Anyway you can reinstall it
after testing.
And as you said a high-load CPU could also be the cause of the issue so you may need to first rule hardware effective out.
If issue still exists, please try the steps below as well:
1. Please check DCOM Server Process Launcher service is started.
2. If not, try to change RPC service to run as SYSTEM account. To do this please modify the following key:
Note: Backup the key before edit incase it cause any issue.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\RpcSs\
Find "ObjectName" and change the value to LocalSystem.
Reboot to see if DCOM back to work and if Windows Server Backup starts working. If not, please provide the result if there is any new error occurs.
If DCOM still not work, please compare the content of the following key with a working server:
HKEY_LOCAL_MACHINE\Software\Microsoft\OLE
Edit if there is any difference and make sure you created a backup of the key before editing.
If you have any feedback on our support, please send to [email protected]

Hard drive failure - issues with iTunes data

My hard drive broke and Apple replaced it.
As a consequence I had issues with data in iTunes, iMovie and iPhoto.
iTunes in particular was a problem as the Mac seemed to think tracks were stored in the trash, so I had reloaded tracks to iTunes (which took ages) and then all seemed fine.
My hard drive was then full so I deleted my trash (97Gb which took over 30 hours) and the same issue happened again - about 40% of my iTunes library cannot find the files as it thinks they are stored in the trash.
Any ideas what might be happening?

Ouch...
But before going for an expensive data recovery service, you have some other options.
At first you have to get that harddrive connected to your iMac. There are several solutions to that. One is to buy a SATA USB Docking Bay (see picture). You can put the harddisk in it and connect it via USB to your iMac.
Next you'll need recovery software. Disk Utility will probably not help you, but it is worth the try (because it is free and comes with OSX).
A great piece of software to look at is DiskWarrior. It once helped me accessing a dying External Harddisk and got most of the data off it before it really died. There are more applications, just google 'Data Recovery OSX', and you will find a lot more.
Oh, and make sure to start a good back-up plan for the future. Time Machine is great, or Carbon Copy Cloner, and maybe invest in a decent NAS to copy your data on.
Good luck!

Hard drive performance issue with DPX & MXF files

Hi everyone,
I spent hours on this forum reading articles about hardware to use for editing large files. I also have to admit, that I made some cut backs due to budge limitations.
I spent most of the money on CPU, motherboard, & ram (6 core 32 gigs , hell of nice MB) ( Video card= gtx 760 2 gig )So ok, I cheaped out on the hard drives. (I think)
I put (2) 7200 rpm drives (raid 0) as my Operating system
(1) External 8TB RAID G drive (USB 3.0 ) as my Media drive. (footage)
(2) 7200 drives (Raid 0) as my Cache Drive
I then opened up an OLD project using canon 5D footage (h264 mov) and some DPX sequence files.
The 5D fooatge played in real time BUT as soon as it ran into the DPX sequence, the frames dropped.
I wanted to cry. I just spent 1,600.00 on parts (&3000.00 pc retail if I bought it instead of building it)
And I got the same performance as my old quad core 6600/ 6 ram system. WHAT GIVES????
So, can someone recommend the cheapest workaround that can get me editing in realtime?
Do you think it's the 3.0 usb connection?
The footage I will be editing will be from the canon c300 (MXF files)
My fear is, if I am dropping frames with DPX file, what's going to happen when I get the MXF files?
Fun Facts:
I tested my OS drives, cache & media,and I was getting 290-301mb/sec READ SPEEDS
Thanks in advance !

Loucann,
I do not have the data on a three drive RAID 0 but here is a two drive RAID 0 with good Seagate ST2000DM001 drives. I have to say "good" because there have been two varieties available, some with two platters and some with three platters. The preferable are with two platters and my experience shows these drive to have an "E" in the third character of the Serial Number like Z1E1ME4V They are slightly faster than the three platter versions. Here is the HD Tune Read of the two better ST2000DM001 drives in RAID 0 on my system.
The best connection is to have all three on a RAIDable Intel SATA III connection but I am doubtfull if this can be accomplished on many motherboards, maybe Eric can comment and enlighten us.
Message was edited by: Bill Gehrke
What motherboard do you have? I guess from the info above it is a socket 2011.

Oracle 9.2.0.6 client JDBC OCI driver compatibility issue with JRockit 1.4.

I have weblogic server 8.1 sp4 running on Linux E3.0 using JRockit 1.4.2_5.
I cannot seem to get the Oracle driver ojdbc14.jar to work. Yes I have added $ORACLE_HOME/bin to my classpath prior to any weblogic classes, I added $ORACLE_HOME/lib and $ORACLE_HOME/jdbc/lib to my LD_LIBRARY_PATH with no luck.
I get the error "no ojdbc10 in java.library.path".
I keep reading in the JDBC driver notes that the driver is compatible with different version of JDK 1.x but not JRockit. Perhaps Oracle 10 has this fixed.
Anyone experiences the same problem ? I am stuck ..

Oracle database 10.2 drivers ojdbc14.jar may also be used with JDK 5.0.
http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.htm#02_03

Macbook won't recognize external Hard Drive and issues with Time Machine

Hello everyone,
I have just bought a new Macbook Pro with Mountain Lion and I am currently having problems with Time Machine.
The issue begun in Snow Leopard: Time Machine was taking too long to backup, and would often not finish the backup because the external hard drive would be unwillingly ejected.
Now with Mountain Lion I have reformated the drive (Mac OS Journaled) and about a third of the way through had the same issue: the drive was ejected before the backup could be finished. I restarted the machine and it happened again. However, now the computer won't even recognize the external drive when I plug it in. I have also tried to power off/on the drive itself to no progress.
I have tested the USB port with another drive and the port is fine. I have also tested the usb cable and it is fine. And Disk Utility does not recognize the drive (even when I try the >diskutil list command in terminal).
Now, I can hear the drive humming normally when I turn it on, and it is not usb-powered (my electricity current does fluctuate).
Could the interrupted backup procedures have damaged the drive? And if so, wouldn't the computer recognize it anyway?
It is a 4 year old WD 1 TB that is used exclusively for TM and has never left the house.
Thank you for your time reading this and let me know if you need any more information that could help out.
Cheers!

From your description, I'd suspect a failing drive. Maybe time for a new external, especially as you've already re-formatted and it's still playing up.
I had a similar problem with one of my clone backups a few weeks ago - it failed, I erased it, re-cloned, worked a couple of times and then it failed again. Disk Utility didn't throw up any errors after re-formatting. I guess all disks die at some point.

External Hard Drive Sync Issue with Deletion

So I recently set up my external hard drive to be my main music folder. The external HD runs continuously on my Mac Pro desktop. I've set it up so the external HD is mounted remotely on my laptop, so I can get all my itunes music without having to physically connect to the drive. I've set it up and everything loaded in, works fine. . . .
But then I tried to delete some files using itunes. It deleted them from my itunes library alright. But they did not delete from the external HD. Furthermore, it did not even prompt me to "keep files" or "delete from library".
I then ran an test. Could i change ID3 tags? Maybe I didn't have write permission or something. Nope, I was able to change ID3 tags just fine.
Does anybody know a way to make this work? Why it doesn't prompt me to "delete" my files?
Thanks.

is there perhaps a problem with permissions? does this problem happen whether you're using either computer or only with the laptop? maybe the laptop only has permission to delete songs from its local database and but not to delete the tracks from the shared master music folder.
i use a wireless external drive for my music too. though i've never had your problem, i have experienced something similar. if i delete a track via Finder then open iTunes, it still thinks the track is there. so if i then delete it in iTunes, it doesn't ask me if i want to keep the files or not, it only removes it from the iTunes library. in other words, i don't get prompted to keep or delete tracks if the track is already gone from the hard drive but still in the iTunes database. i haven't tried changing the tags in that scenario however.

ATI driver installation issue with Windows Vista on Boot Camp (new iMac)

I've just purchased a new 20" iMac with Core 2 Duo 2.4GHz.
Then I installed Windows Vista Ultimate on a Boot Camp partition.
Vista installation was eventless and worked nicely.
Now the problem has begun...
I downloaded the latest ATI graphic card driver (Catalyst 7.7 for Vista 32) from the ATI website. The Catalyst software did not recognize the graphic card and installed nothing. I still have generic Microsoft standard VGA video adapter, which keeps me from playing any recent 3D games...
Someone please help me on this so that I can start playing Oblivion...
Message was edited by: Giraku

Hi and welcome to Discussions,
I still have to find a verification for this, but:
Aplle has up to now always used the Mobility versions of the ATI and NVIDIA graphics chips in the iMacs and MacBooks, MacBooks Pro.
I assume that the in the new imacs, they are also using the Mobility version of the Radeon 2400/2600.
The ATI drivers you can download from the ATI/AMD website are only suitable for the Desktop Radeons, NOT for the Mobility Radeons.
ATI/AMD does not provide drivers for the Mobility Radeons, but are refering to the Manufacturer of the Computer for Drivers, which is Apple.
Sorry to say, but it seems you have to wait for a new BootCamp version which you include Driver support of the new iMacs.
Sorry
Stefan

External drive sleep issues with AEBS.....

I have a WD My Passport Studio drive, which works fine when I plug it into the USB port of my router to access over the wireless network (Apple Airport Extreme). It takes power directly from the USB port. No problems whatsoever.
If I plug my WD My Book Studio II drive (which is a 3.5" so has its own external power) into the USB port on the same router, I can access it over the wireless fine. But after a while of non-use it goes to sleep. Waking it up from sleep over the wireless connection then takes so long that I need to just unplug it and plug it back into the USB port again!
Is there any way I can stop it from going into its power save / sleep mode when used with the AEBS?

When I check my e-mail with my iPhone in the morning, there are no messages there, because when I wake up the Mini the next morning, it has already downloaded messages I received overnight. I can tell the computer was not actually awake, because no Time Machine backups had been done since I put it to sleep the night before.
I found other threads referring to Lacie drives not spinning down, so I'm assuming that's a problem with the drive, not with Lion trying to access the drive while the computer is asleep.

MacBook Pro Hard Drive Replacement issues with OSX

Ok so i just replaced a hard drive in a macbook or 17" 2009 and it's fairly simple. I replaced it with a 500g seagate hybrid drive.
After fter doing that I put the old drive in an enclosure so the client could have all of their pictures, etc. I tried to install yosemite onto the new hard drive from the recovery option on the boot loader. It took four hours, but finnaly made it, and when it did it just sat at a grey screen forever. the mouse worked on this grey screen which was wierd, and it hovered there forever. I tried the same process again, this time leaving the grey screen overnight. Nothing. Still.
PLease help.

Is the 640GB WD approved as an internal drive for your MBP? If it is, then the clean, formatted drive with no OSX should be installed in the MBP. Then start up (holding the "Option" key) from the OSX installation disc and install OSX. After a successful installation, the MBP will restart. Then run Software Update to get the latest version of OSX.

Satellite L670-1KZ - driver update & issue with ARMA II game

Hi everybody,
I just bought this satellite L670-1KZ in France, and I already found fews updates.
But, before doing anything I wish to have comment and recommandation from others owners, to make sure the files I have in hand are useful and will not damaged anything (never know).
1) UPDATE RECOMMANDED OR NOT ?
This is the list of the update I found :
Ati Radeon Mobility HD 2000/3000/4000/5000/6000 version 11.3 WHQL
Fabricant : ATI Technologies Inc.
Version : 8.831.2.0000
Nom du fichier inf : c7115930.inf
Date du fichier inf : 08/03/2011
Date de publication (mise en ligne) : 30/03/2011
Realtek Pilote High Definition Audio version R2.57 WHQL
Fabricant : Realtek Semiconductor Corp.
Version : 6.0.1.6299
Nom du fichier inf : hdapcee3.inf
Date du fichier inf : 25/01/2011
Date de publication (mise en ligne) : 09/02/2011
Realtek RTL8100/8101/8102/8103/8105/8401/8110/8111/8168/8169 version 7.037.1229.2010 WHQL
Fabricant : Realtek
Version : 7.037.1229.2010
Nom du fichier inf : rt64win7.inf
Date du fichier inf : 29/12/2010
Date de publication (mise en ligne) : 09/02/2011
Realtek RTL8191SE-VA2/RTL8192SE version 2019.1.1203.2010 WHQL
Fabricant : Realtek Semiconductor Corp.
Version : 2019.1.1203.2010
Nom du fichier inf : net8192se.inf
Date du fichier inf : 03/12/2010
Date de publication (mise en ligne) : 09/02/2011
Intel Chipset Device Software version 9.2.0.1025 WHQL
Fabricant : Intel
Version : 7.0.0.1013
Nom du fichier inf : ibexahci.inf
Date du fichier inf : 08/06/2010
Date de publication (mise en ligne) : 09/03/2011
Intel Rapid Storage Technology ICH7/ICH8/ICH9/ICH10/PCH version 10.1.0.1008 WHQL
Fabricant : Intel
Version : 10.1.0.1008
Nom du fichier inf : iaahci.inf
Date du fichier inf : 06/11/2010
Date de publication (mise en ligne) : 21/12/2010
2) ABOUT THE VIDEO CARD :
Also, before I had a Amilo Xi 2550-8009 that melt last week, I changed it for this Toshiba, but I am facing a problem with a game ARMA II.
The error message I got is : "Error compiling pixel shader", with black screen and a "ping" noise.
I don't understand because I found a comparative test with a GeForce and my current HD5650 that is supposed to support this shader stuff.
Did you manage to run ARMA II on your laptop ? If yes, what did I miss ?
Thanks in advance for your feedback fully appreciated,
G2MARS

Hi Syntax,
yes agree, you're so right, I just got 3BDO within 20 minutes today, still trying to understand why.
Signature du problme*:
Nom dvnement de problme: BlueScreen
Version du systme: 6.1.7601.2.1.0.768.3
Identificateur de paramtres rgionaux: 1036
Informations supplmentaires sur le problme*:
BCCode: d1
BCP1: 0000000000000028
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF8800176EB2D
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
It might come from those damned update I did.... The last one is about the video card on the pilot update through driver device, right click, update.
I was surprised he did it, but, I suspect I had a BDO before that, can't remember.
Then... Still trying to identify the reason, I might go back to the older pilot version.
About Arma 2,on the very good website "Can I run it" it said there was a problem with the video card
Video Card
Recommended: NVIDIA GeForce 8800 GT / ATI Radeon HD 4850 with Shader Model 3 and 512 MB VRAM or faster
You Have: ATI Mobility Radeon HD 5650
Upgrade Suggested: Unfortunately, your Video Card does not meet this requirement. In the other hand I found this website with a test that compared the HD5650 with a GeForce, they said :
"La Mobility Radeon HD 5650 se montre ici bien plus performante que le GeForce GT 420M qui se relgu la dernire place par le GT 330M, plus performant sur ce jeu galement."
The HD5650 is more performant than the GeForce GT 420M .... If you understand something let me know cause I don't !
[TEST ATI and GEFORCE|http://www.clubic.com/carte-graphique/carte-graphique-nvidia/geforce-400-series/article-363820-3-test-nvidia-geforce-gt-420m.html]
Amazing, because this game ran on my Amilo xi 2550-8009 and a ATI Radeon HD 2700 256 Mo.
And Arma II Operation Arrowhead didn't show this error message, but, didn't run so well even with low graphic option,I just downloaded a ultimate patch v1.59, to be followed.

Driver install issues with 8800gt 512 OC

been searchin msi site for help on this but couldnt find anything. Trying to install the 8800gt 512 OC on updated win xp pro. installation gets to 50% then screen goes black with dos like cursor at top left-cant type anything. restart once windows hangs mid load. restart again andi have to load previously known good configuration. driver remains uninstalled.
GEAR LIST:
asus p5n-d
intel quad q9300 2.5ghz
hitachi sata 750 gb
Rosewill 550w psu
corsair 4gb(2x2) 800mhz ddr2

Quote from: apm13 on 05-May-08, 04:03:28
Haha YES! the forceware 174.93 did the trick. thanks aaron. If you dont mind could you explain why it worked? im curious and would like to get a better understanding of some of this stuff. even just a link somewhere would be great. thanks again
They're newer and contain lots of fixes.

G Drive boot issue with G Tech Cable

i had a /very/ gnarly problem with my option boot freezing up when my G Drive was on while working fine when the device was off. since i bought this for a Time Machine backup, turning off to boot and trying to remember to turn back on bit all the time back and forth and back and forth.
we switched ports, i did an RMA and it turns out that i am pretty sure this had to do with a /type/ of cable. not one single cable but the FW800 that come with this device. could be wrong but everything is working now with a different kind of cable and same slots while both white cables that i am sure came from the manufacturer do not work in the same slots.
anyway, on the off chance that someone else is trying to hack through these woods:
for the record the cable is white and says "13945" on the end as well as "91 AWM E257034 FREEWAY STYLE 20276 80degreesC 30V VW-1..."
i have a mac pro (1,1) and the device is a G-Tech 3 TB external drive.

i think i jumped the gun here. it appears that it is the firewire port on the back of the machine that may be the problem here.
anyway, plugging the non G-Tech cable into the firewire port on the front of the machine seems to have solved the fact that i was still having problems using the FW port on the back...

Netgear WNDR3400 - drive share issues with MacBook Pro 10.9

Hello,
I have a Seagate drive connected to a Netgear WNDR3400 router and it has two partitions: 1Tb for Mac (Mac_Storage) and 1Tb for Windows (Win_Storage).
When I connect to it as smb://readyshare from my Mac, the Mac_Storage is mounted correctly, but any attempt to copy any file there will result in the error "Items can't be copied to "Mac_Storage" because you don't have permission to read them". Using Terminal, here's what I get:
$ echo "texttext" > /Volumes/Mac_Storage/filetest.txt
-bash: Mac_Storage/filetest.txt: Permission denied
...and the partition settings in my router:
Share Name               ReadAccess        WriteAccess        Folder Name   Volume Name     TotalSpace FreeSpace
\\readyshare\Win_Storage    admin             admin              U:\           WIndows Par     931.0G       918.7G
\\readyshare\Mac_Storage    All- no password All - no password T:\           MacOS Partition 931.7G       931.1G
additional information:
$ cd /Volumes
$ ls -l
drwx------ 1 myuser    staff 16384 Nov 23 21:06 Mac_Storage
lrwxr-xr-x 1 root      admin      1 Dec 25 13:10 Macintosh HD -> /
I tried chmod 777 Mac_Storage, and no changes were made (no error message returned either).
Please advise. I can't use that share as a Time Machine disk by reading the instructions in the link: http://code.stephenmorley.org/articles/time-machine-on-a-network-drive/ and I stop after the execution of rsync, which returns Permission Error (13).
Thanks!

Try these steps.
1. Start up in Safe Mode.
    http://support.apple.com/kb/PH11212
2. Empty Trash.
    http://support.apple.com/kb/PH10677
3. Repair Disk
   Steps 1 through 7
    http://support.apple.com/kb/PH5836
4. Re-index Macintosh HD.
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409

Live Drive IR issue with Mic2 in

Similar Messages

Maybe you are looking for