Live Event Quality

Hello,
I am New to Flash Media Server…
I am creating a live event broadcaster and receiver. I am
succeeded in uploading data and receiving through my receiver and
broadcaster files.But I am unable to get such a quality what I am
expecting through my receiver file
My code
mycam = Camera.get();
mycam.setKeyFrameInterval(0);
mycam.setMode (320, 240, 30);
mycam.setQuality(100000/8, 0);
mycam.setMotionLevel(30, 30000)
mymic = Microphone.get();
mymic.setRate(15);
ns.attachVideo(mycam);
ns.attachAudio(mymic);
myvid.attachVideo(mycam);
is there any possibility to increase more quality in live
stream..
help me in this topic

I believe that PPV is done using a QAM TV channel, not IP (like VOD). If you are tuning to a channel for your PPV event then it has nothing to do with your Internet speed - it is carried on a totally different optical wavelength and not IP delivered.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

Multiple output streams of differing quality for live events

I'm to be working on multicasting a few live events for my company. I've configured multicast to work throughout our networks, works great. But we do have a few remote employees who need unicast streams over the public internet (via QT Streaming Server).
I want to deliver the local clients a high-quality ~2-3mbit stream, and the remote users a smaller 150-300k stream.
Is there any way to get QT Streaming Server to recode its stream? Or a way to make Broadcaster output two simultaneous streams? Or do I need two QT Broadcaster boxes?
TIA,
-porkchop

I've found no way to do this with broadcaster, but I have found that WireCast (http://www.telestream.net/wire-cast/) does exactly what I need. Combined with QT Streaming Server, I'll be able to support both multicast and unicast clients with streams of various sizes.

Streaming Multiple Live Events to 1 EC2 Instance

Hello, we are new to the Flash Media Server world. We are using this with Amazon EC2 integration. We currently have a need to stream multiple streams from various locations at the same live event. We have 3 stages we need to stream at a music festival. How can we utlize streaming these different stages to one EC2 instance running Flash Media Server? Currently it seems we are only able to generate one .m3u8 file with the cloudformation template. Ultimately we'd like to have a playlist in our end player where our subscribers can access the multiple stages. It seems this should be possible. Any tutorials on how to do this with Amazon EC2, Cloudfront and Flash Media Server?

I just figured it out through hours of testing. Too simple actually.
Create your amazon fms stack.
in FMLE on each computer- make sure the stream has (anyname)?adbe-live-event=liveevent
The ?adbe-live-event=liveevent is the key.
you can name the stream anything before the ? . (stage1?adbe-live-event=liveevent on computer 1 , and stage2?adbe-live-event=liveevent , on computer 2
The rtmp address is your 1 instance or server /livepkgr from your cloudformation stack not your instance.
(you must have this /livepkgr at the end of your rtmp. find it under cloud formation and the region you made it in.
Then use what ever rtmp player and put the differant streamer names in with the same rtmp address.
I use a player where clients can pick differant parts of an event broadcasting, just like your example.
Best of luck.
[email protected]

Show & Share Live Event Full Screen Disabled

Hey,
Has anyone else encountered this. When we are boradcasting a live event the 'Full Screen' button in Show & Share is disabled. I'm pretty sure this functionality used to be availabel but have no idea why its suddenly not.
Any help would be appreciated.

this button is off , can not be used by the client . In the above when i said use more tab show below
on show and share - videos
Browse to the video
On the video playback screen, click the More button
Choose Fullscreen
http://www.birdvilleschools.net/tims/techsvcs/resources/pdf/Manual.Cisco.DMS.pdf
please find link search fullscreen
thank you
please rate if this will help

How to use flash media server with cisco show n share live event module?

hello all
Is it possible to use flash media server in show n share (non dme)live event ? i 've configured flash media server, can receive multicast streams, bu i have no idea what to write in video url fild in the live event basic setup.

Hi Temur,
You should be able to stream from a Flash Media Server.
The URL should look like this:
rtmp://xxx.yyy.com//flv:
You can do some tests from a PC to get the exact URL that would suit your environment.
Regards,
Nicolas

Why is live event not working?

Apple.com says "live event will be right here", but it's not! Yes, I'm using Safari.

Apparently nobody knows what is going on and when it's gonna be fixed....

Where can i watch the live event today (oct. 4th)

Where can i watch the live event today (oct. 4th)? I knwo it's going on now. All the links i have tried will not open, even in different browsers. Maybe i am trying the wrong ones. Any ideas? -Thanks

You can't. Apple is not streaming today's event live; they haven't streamed any event live for at least a couple of years. For blog/twitter-style updates, try:
http://live.appleinsider.com
which still seems to be working. Other sites are getting overloaded.
Regards.

Multicast Show and Share live event from TCS

Hi
I have a deployment with DMM, SnS, and TCS and C90 Telepresence codec.
The TCS is sending the live stream to the SnS server. The question is if it is possible to multicast that live event to the SnS clients, or is unicast the only option here?
If unicast is the only option with the current deployment, is it possible to make a multicast stream with a different deployment?
I would appriciate any thoughts on this.
Regards,
Ola Dallokken

Hi, yes you can use mutlicast to do this(but as Gabriel says its not SNS tat streams it, it is merely a container looking at the raw stream from the TCS or wherever you choose to pull it from) but its a complete waste of time IF your network isnt setup for Multicast AND if you have WAN sites running slow links...TCS uses Microsoft Windows Media Server for Uni/multi and is inherently TERRIBLE in sending multicast traffic..! If you have wireshark have a look for yourself..unicast it can deal with and it will send a nice consistent stream but Multicast bursts all over the shop(so a 500k stream can burst to 2mb..which is not a good thing if yhou know about routing congestion etc etc)...took me months of workng out the root cause of the issue and to eventually get Cisco to fess up about it and say 'yes' its an issue. Its really a Microsoft issue and unfortunately thats what Cisco's TCS platform sits on....:).
Forget reading he 'standard' Cisco blurb as it will say try this and try that, tweak this and tweak that but in the end you just cant use it (unless as i say your on a LAN or your WAN has big links and can deal with the overheads!) also unless you have a TAC engineer who has actually deployed this and not just read the manual they wont having wokring knowledge of the issue either. It took me a long time to find someone at Cisco who actually did know the issue and would actually admit it was a issue..I guess thats why the developed ECDS. Now thats a good product.But as usual not cheap at all.
Thats why Cisco talk about 'Wowza'..!(or atleast they use it as an example in thier blurb for streaming and not the TCS) As it can deal with multicast fine BUT the catch is its not supported by Cisco...:)...the only REAL solution is to use a content delivery system like Cisco ECDS. Believe me i have spent months going through this with TAC Engineers and i have the current ' Cisco Expert' in this field who has helped me alot with this. Its a very sad fact to find out 'after' the fact.
Also the new SNS will be very different so will lend itself to ECDS in the long run anywa so all this we are discussing becomes a mute point...
Hope this helps. If you need any assistance apart from the TAC let me know as i have just spent a fair while deploying this myself and working out 'ALL' the non documented issues, of which there seem to be alot. Once its in it seems to work ok though.

Show and share & live event module problem

Hello everyone
recently i've installed cisco show and share , also with live event module.. I need to run live event without DME(digital media encoder), i need to run "NON-Dme live event" .
simply i need to attach my web cam to my live streaming event? is it possible?
There is a field "Video URL" but i dont know exactly how to use it..
thanks advanced

Hi Temur,
It's true that the Show and Share only supports either WMV or Flash streams as input. Therefore, you need to make sure that the camera you are using has that capability.
Unfortunately, I cannot tell you of any camera that works directly, because I don't know of any. Normally, for our lab tests, we use either a DME or a Windows Media server to generate the live streams.
Anyway, I would recommend you to have a look at the link below for a list of the supported bitrates and video dimensions.
Regards
Daniel

Mac os x 10.6.5 today release ?? apple special live event today ?

did mac os x 10.6.5 release today?? on the apple special live event

mikewolf wrote:
did mac os x 10.6.5 release today?? on the apple special live event
Your question has already been answered by the "live event" itself, but even before that some generalizations that could have been made (at the risk of "prognosticating"), based on past Apple behavior:
- A "point" release of OS X (i.e. 10.6.x) will probably never be featured in an Apple event. Those would be reserved for "main" releases such as OS X 10.6 or OS X 10.7. You've just seen the first event to feature OS X 10.7. There will probably be another showcase for it during Apple's Worldwide Developers Conference next summer.
- Since it will be next summer before OS X 10.7 is released, there may be several 10.6 "point" updates by then. Ten months elapsed between the release of OS X 10.6 and OS X 10.6.4, an average interval of 2 1/2 months per update.
- The update to OS X 10.6.5 will probably be released eventually, although no one who knows that release date and has permission to say will be mentioning its schedule here. If you search Mac news sites, you should be able to locate recent news on it.

Multiple signups at live event & automatically have form reset

Is there a way to have my form automatically reset itself (or open a new form) everytime a signup is completed so the next person can signup right away? This is needed for a live event with many new signups.

Please see the following FAQ: http://forums.adobe.com/thread/869660 to see if it works for you.
Thanks
Roman

Presenter View During Live Events In Show and Share

Hi,
I am a bit confused about the user authorisation during live events of Show and Share. There is a user who is creating the event and publishing it. I think this user should be the moderator. He can see the questions tab and check the questions coming from the other participants and send them to the presenter view tab.
I have found some information about the moderator and presenter in the user guide for show and share but I could not find out which user can be a presenter, or are the presenter and the moderator the same user or not.
Below is from user guide:
The live event moderator pre-screens these incoming questions and comments as they arrive. Moderators can:
• Move any high-priority questions to the Presenter’s View tab. • Move any low-priority questions to the Removed Questions tab, either manually or automatically by keyword. • Use keyword filters to see and manage only the messages that match those keywords.
. The presenter then responds to any number of these pre-screened questions and comments. (These are messages that the moderator moved to the Presenter’s View tab.)
From the above information, it seems that there are seperate presenter and moderator, but is there a way to assign a user other than moderator only the presenter rights?

Great question, Ken! I too would like to know if there is a way to transfer video content management to an other author. In the case that a user publishes content and later leaves the company, retaining control of the published material is a requirement.

Possible to bypass tape and capture live events in FCP via Firewire?

I was thinking to buy a Canon XH-A1E or similar HDV camera. I was wondering if it is possible to run a firewire from the camera during a live event to a laptop running FCP in capture mode and capture the footage to FCP as it is being shot.
Thanks.

If the computer crashed, I believe you would lose the file currently being captured into. In much the same way as if you were to prematurely stop a copy process from one disk to another, it would simply disappear.
At any rate, if the file did survive it would most likely be unusable because the directory entry would be incomplete.

Unable to watch ESPN live event online.

For the past month, ESPN access has been unavailable. It worked fine before. Now when I try to watch a live event online, I receive a "User not authorized error" message on the video screen. And I am logged into Verizon simultaneously when this occurs. Anyone know what is causing this problem?

fosojedi wrote:
I am having the same issues. I cannot watch espn on my desktop. I have tried logging out from the online viewer and re-logging it without any success.
All I ever get is "User not authorized".
Are you presented with a Verizon sign in page when you're trying to sign in using the web browser? The pages has the Verizon logo on it. Which web browser do you use? Are you using a subaccount to sign in or your main account?
I just checked and all is working fine with the WatchESPN web site for me.

Live event: same channel same port fail to stream two differ stream type

Hi All,
When I create live event in same channel and same port with differ type streaming (unicast and multicast) I can’t start DME so I cannot start broadcast too and video cannot stream..
I did try and used non-dme live event .. the result still same and video not stream in sns. Im ussualy use this way with last dmm version (5.0.2) and to day I use SnS ver 5.2.1 its not running/ video blank......
anybody know what happening ???
thanks
RD

RD,
Lets step back a little and get some more details:
* What type of DME are you using?
* What is connected to the DME providing the LIVE stream?
* Specifically, how do you have the DME configured for your setup?
* Please provide the SCREEN CAPTUREs of your DME configuration on
the SNS
* Have you configured a "Basic" configuration (single channel\port only) on the DME
and SNS with 5.2.1 and have it working? Have you ever got the DME working with SnS 5.2.1
Thanks!
T.

Live Event Quality

Similar Messages

Maybe you are looking for