Live event: same channel same port fail to stream two differ stream type
Hi All,
When I create live event in same channel and same port with differ type streaming (unicast and multicast) I can’t start DME so I cannot start broadcast too and video cannot stream..
I did try and used non-dme live event .. the result still same and video not stream in sns. Im ussualy use this way with last dmm version (5.0.2) and to day I use SnS ver 5.2.1 its not running/ video blank......
anybody know what happening ???
thanks
RD
RD,
Lets step back a little and get some more details:
* What type of DME are you using?
* What is connected to the DME providing the LIVE stream?
* Specifically, how do you have the DME configured for your setup?
* Please provide the SCREEN CAPTUREs of your DME configuration on
the SNS
* Have you configured a "Basic" configuration (single channel\port only) on the DME
and SNS with 5.2.1 and have it working? Have you ever got the DME working with SnS 5.2.1
Thanks!
T.
Similar Messages
-
How to use flash media server with cisco show n share live event module?
hello all
Is it possible to use flash media server in show n share (non dme)live event ? i 've configured flash media server, can receive multicast streams, bu i have no idea what to write in video url fild in the live event basic setup.Hi Temur,
You should be able to stream from a Flash Media Server.
The URL should look like this:
rtmp://xxx.yyy.com//flv:
You can do some tests from a PC to get the exact URL that would suit your environment.
Regards,
Nicolas -
Hi, I'm currently experiencing a problem with some VMs in a Hyper-V 2012 R2 failover cluster using Fiber Channel adapters with Virtual SAN configured on the hyper-v hosts.
I have read several articles about this issues like this ones:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/baca348d-fb57-4d8f-978b-f1e7282f89a1/synthetic-fibrechannel-port-failed-to-start-reserving-resources-with-error-insufficient-system?forum=winserverhyperv
http://social.technet.microsoft.com/wiki/contents/articles/18698.hyper-v-virtual-fibre-channel-troubleshooting-guide.aspx
But haven't been able to fix my issue.
The Virtual SAN is configured on every hyper-v host node in the cluster. And every VM has 2 fiber channel adapters configured.
All the World Wide Names are configured both on the FC Switch as well as the FC SAN.
All the drivers for the FC Adapter in the Hyper-V Hosts have been updated to their latest versions.
The strange thing is that the issue is not affecting all of the VMs, some of the VMs with FC adapters configured are live migrating just fine, others are getting this error.
Quick migration works without problems.
We even tried removing and creating new FC Adapters on a VM with problems, we had to configure the switch and SAN with the new WWN names and all, but ended up having the same problem.
At first we thought is was related to the hosts, but since some VMs do work live migrating with FC adapters we tried migrating them on every host, everything worked well.
My guess is that it has to be something related to the VMs itself but I haven't been able to figure out what is it.
Any ideas on how to solve this is deeply appreciated.
Thank you!
Eduardo RojasHi Eduardo,
How are things going ?
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi Alll,
I have a CUOM Version 2.3 which shows mutiple notifications per Device for Event StoppedGSUPerformancePolling with same time stamps. The message below is generated from the default All_Events for all devices.
Does anyone have a solution for that.
Regards Michael
This message is generated 8 times with the same time stamp in all messages.
** This message is generated from Cisco Unified Operations Manager **
ALERT ID = 00012OW
CREATION TIME = Sat 30-Oct-2010 16:31:57 CEST
MODIFIED TIME = Sat 30-Oct-2010 17:00:58 CEST
STATUS = Active
SEVERITY = Critical
MANAGED OBJECT = 183.201.141.193
MANAGED OBJECT TYPE = VoiceGateway
ASSOCIATED EVENTS =
Cleared:183.201.141.193:Unresponsive
Active:183.201.141.193:StoppedGsuPerformancePolling
CUSTOMER IDENTIFICATION = Voice Port
CUSTOMER REVISION = Voice Portif you get SNMP timeout on multiple devices then the fault usually lies in the path that the polling follows to get to these devices and back to the server.
The problem obviously lies in the part path they have in common.
It is not unusual to see the highest backbone loads during the night, due to backups being taken.
Make sure the most important inter-switch links have no errors.
I would rather fix this then turn off alerting.
Cheers,
Michel -
TV's on Same Channel - why a delay?
When I have the same channel on 3 TV's, why are they delayed and not the same? I have them all on HD channels, so, it can't be because it's HD vs SD.
Thanks.If one of the boxes is a DVR. The reason for the delay is the buffer. On the regular box, live programing comes in and is displayed. On a DVR the live programing comes in, is buffered (so you can pause and rewind the live tv) which takes a second or so. So the programing will display about about a second behind the live programing.
====================================================================================
Error exists between keyboard and chair. -
Controller places ap's on same channel
I am studying for the CCNA Wireless, and just acquired a WLC 2125 and some ap's to lab with for a bit. I have the channel and power settings set to global, and there are 2 1142's attached to the controller in local mode. Both are accept clients and roaming seems to work as it should. However, I also have an autonomous ap thrown in the mix (another 1142) to see how the controller reacts. It appears quite content to place one of the controller-based ap's on the exact same channel as the autonomous ap 3 feet away from it. The controller sees it as a rogue at -27 RSSI on the same channel, so it's by no means a ghost. Any ideas on settings I should check? I figured the controller would try to balance on 1,6,11 based on the environment as well as its members. Here is a screen shot of what I am seeing.
Q. I have set the Radio Resource Management (RRM) to the default settings on my WLC. However, I cannot find my RRM to automatically adjust the channel and power levels. Why?
A. RRM possibly does not work for any of these reasons
The RRM works only if an AP hears RF signals from at least 3 nearby APs, with a third neighbor that transmits a signal strength greater than -65dbm. If any of these condition fails, the RRM does not work.
The auto RRM feature includes channel adjustment, power adjustment, and coverage hole detection. These features do not work if they are either disabled or the method of assignment is chosen as manual.
While a fresh AP boots up, it initially keeps power at the default value of 1 (highest). When it sees 3 or more APs with power levels greater than -65 dBm (in the same RF-Mobility-Domain and same channel), it attempts RRM first (change channels). If not successful because the channels are manually fixed or there are more APs than channels available, the AP drops its power level.
Refer to Radio Resource Management: Concepts for more information on how RRM works
http://www.cisco.com/en/US/products/ps6366/products_qanda_item09186a008064a991.shtml -
i currently have a calendar synced that has events scheduled in perpetuity, scheduled as individual events. I would like to delete all events with the same title. I do not want to delete the entire calendar nor do I want to go into every event and delete individually. These were not scheduled by me so I do not know how they were added one by one and go on forever but they are NOT scheduled as reoccurring and thus must be modified individually.
I can do a search and find all events, is there a way to just delete all events with the same title all at once?
this is a Microsoft outlook synced calendar and I am seemingly unable to delete the events all at one time from Microsoft as well.
Please help!If you still have access to the Outlook calendar in Outlook, I would delete them from there. There are a number of ways to do that, but if you open the individual event in Outlook, does it show a repeating pattern? If not, then you may have to delete them individually, but that is not that difficult either. Go into the calendar and then change the view to a list view. From there you can sort the view according to subject. This should bring all of these same appointments together in the list and you can select the group in Outlook and delete them. Once you do that, you can change your view back and then sync the phone. That will remove the events from the phone.
-
Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.
there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store
-
How to use the same channel to send a file and messages to the server
I'm trying to develop a simple program that will send and receive files from the server and in the same time I need to communicate with the server through the messages
I'm using TCP Socket
my problem is
I have only one channel
so, I have no option, either I can use it for sending the file itself or sending the message .. but not both !
my question is : How can I use the same channel for sending and receiving (file & message)
I would appreciate for any clue or hint
bestkajbj wrote:
kmarwani wrote:
Thanks for reply
yes, that what I'm thinking to do
but, in case of sending binary file, if I attached a flag on its header, will it corrupt the file ?
bestThe other end would of course need to decode the messages that you get, and only write the "data" part to the file.Thanks
I'm gonna try to hard-code what you suggest and i will post what happen with me here
even though I'm not sure how can I add header to a binary file and remove it from the file at other end. (coz I read it as stream and send as array without touching its contents)
this how I'm sending the file
ConnSocket = CSocket.accept();
ToClient = new DataOutputStream(ConnSocket.getOutputStream());
File myFile = new File("abc.jpg");
FileInputStream myFileInStream = new FileInputStream(myFile);
BufferedInputStream mybuffInStream = new BufferedInputStream(myFileInStream);
myBytArray = new byte[(int) myFile.length()];
mybuffInStream.read(myBytArray, 0, myBytArray.length);
ToClient.write(myBytArray, 0, myBytArray.length);
ToClient.flush();
myFileInStream.close();best -
Can I set multiple events at the same time to repeat on iCal?
I know I can do this by manually selecting each one of them and setting it to repeat.
But it's a pain and it doesn't make sense not to be able to edit more than one event at the same time.
When I want to set up my weekly schedule I do it for one week and I want to be able to select all the events in that week and set all of them to repeat weekly at once.There are editors that bring up the songs one at a time, so you can edit them in a row. Winamp works that way. iTunes does not.
-
ICal event is in the background BEHIND event at the same time in foreground
I added an event to iCal via Evite and it is BEHIND a recurring event at the same date and time. There is no way to edit it or view it without moving the recurring event. Normally, the event would be shifted to the side so you can view both.
Any idea how to get iCal to display these two events properly?
Uploaded with plasq's Skitch!Looter,
One of the first things to try is "refresh" the com.apple.iCal.plist file. You will find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Quit iCal, drag the .plist file to your Desktop, log out/in or restart and check iCal for normal behavior.
;~) -
I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You
I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos. I can stand to re edit one or two projects, but not ALL.
-
Revision: 4290
Author: [email protected]
Date: 2008-12-11 14:24:37 -0800 (Thu, 11 Dec 2008)
Log Message:
Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* The bug app was arguably generating bogus test data (messages with duplicate ids), and 99.9% of applications won't be configured this way (using multiple ChannelSets with overlapping Channels, pointing at the same server) but it's still worth making this work just right anyways.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-288
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ConsumerMessageDispatcher.asRemember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
How can i browse FP 2000 via serial port same use Ethernet port(RJ 45)?
I am a new user for labview.I develope my program with FP 2000 but I have some problem
1 How can i browse FP 2000 via serial port same use Ethernet port(RJ 45)? if it can Tell me please.
2 If I use GSM/GPRS modem via FP 2000 rs 232 port (I under stand how to send AT command) and leave it stand alone
Can I dial modem and browse file in FP 2000 same as use Ethernetport?
Someone please help me.Thank you very much.Hi!
First, I can say that your project involves many things, I cannot describe all features in the forum, and I'm not used with GPRS modems (my modems are base band serial modems...).
Anyway, I would say that in your project you should proceed like this:
1) Configure your FP 2000 module via MAX and ethernet connection;
2) Download an embedded application to your module (build in LabView Real-Time)
3) In your application, you should build a kind of serial port manager, and by the means of serial port you send/receive commands from PC.
The commands from PC can include "Tell me the about the FP 2000 file system ", or "switch on line X", or anything you need.
I think it would be difficult to use Internet exp, because you use IE with TCP/IP, and TCP/IP is over ethernet.
I know that for Windows you can find some wrappers that make you "see" the serial port as an ethernet, but these wrapper do not exist under filed Point, and you shoul build one yourself!!!(and that's not easy).
For example, to browse your files, you should build a VI that searches through your file system, and reports, via serial, the files present in a directory (it's an example....).
About communication between GPRS modems and FP2000, I know nothing. I suppose that these modems accept serial inputs, so you'll have to configure your serial port on FP 2000 with the correct baud rate, parity, and so on..... and you send your data to the modem. The modem will transfer data in its way, no matter on how it does.
To send data to your modem you shoud take a look to some Serial communication examples. What I suggest you, first, is to connect the serial port of FP2000 to a PC, and test communication between PC and FP2000, without modems. Just direct cable connection! If you're able to do this, insertion of modems is the next step, and should be quite easy. If you're not able to make the PC receive strings of data from FP2000, over RS232, adding modems is a further complication, and you won't come out of this mess!
So, what I say, is just build, for now, a simple embedded application for FP2000, that, using RS232, sends data to a PC (you should see data sent with use of Hyper terminal).
To build this application, use Instrument I/O --> VISA commands (VISA open, VISA write, and Property node should be enough, for now).
Please, let me know if this helps......
Have a nice (programming) day!
graziano -
Same Channel on Different WLANs and RTS/CTS
Hi
I have 2 questions about physical layer of wireless lan.
1-) Many WLANs(SSID) use same channel for communication, that means they use same frequency, what prevents the collisions between different wlans but same channel?( I am asking about RF signal collision)
2-) Do rts and cts valid for just one wlan that computer which is generated, belongs to or do rts/cts synchronize all different wlans that use same frequency.
Thanks.1.) Congestion Avoidance. Before the client transmits, it listens to for energy on the frequency it is transmitting on. If it hears energy, it backs off for a time. Then listens again.
http://en.wikipedia.org/wiki/Carrier_sense_multiple_access_with_collision_avoidance take a look at the diagram on the left
2.) RTS/CTS client sends the RTS, then the AP will send the CTS.
http://en.wikipedia.org/wiki/IEEE_802.11_RTS/CTS
HTH,
Steve
Maybe you are looking for
-
my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working. I am in the noerthern [parts of a
-
Google contact sync keeps thinking 25% of contacts have changed
Hi -- I'm trying to configure my fiance's Macbook Air to sync her contacts with Google and keep getting messages about an unexpectedly large number of contacts being changed. To debug this, I've migrated the address book by hand, and am still getting
-
Hi, We've developed a web dynpro application and integrate it in the portal via iview. Our web dynpro application will need to fetch the data from backend system. Due to the slowness of the backend and amount of data, we have a timer in webdynpro con
-
Hello, I'm using a Tabstrip but when I put inside a tab an adobe form it doesn't shows anything. I'm not sure if this object (TabStrip) support an adobe form inside. Please anyone knows? Thanks Regards SU
-
How does one check the current mfe version on E72 and download the latest MfE Client version for the same device? Because we have an E72 which cannot sync with Mail for Exchange since transition from Exchange 2007 to Exchange 2010 Server. Can you sen