Live for speed (racing sim) vs bt's packet shaping

For the past 1/2 a year I've been getting more and more annoyed at bt broadband. Now I understand that they have to packet shape because its their fair usage policy but now its started affecting this game, live for speed. Its a online racing simulator that becomes impossible to play (constantly unable to find server / excessive lag / disconnecting) until it becomes 00:00 and it suddenly plays fine again. The odd thing is that I play counterstrike: source and Team fortress 2 and they have no problems with packet shaping what so ever.
I thought bt was supposed to have gaming ports as high priority or something like that? Anyway, Live for speed uses different ports, depending on which server your connected to:
Master Port 8080
Server IP 192.168.0.107
Server Name (IHR)IRONHORSE RACING
Server Port 8888
Game Port 63392
The master port and game port stay the same, where as the server port changes. So if anyone can help, I will be very grateful!
Many Thanks
Ryan

Anything with 192.168.x.x is a local address on your own router, not elsewhere on the internet, usually.
You would be better off asking the question on LFS to be honest.

Similar Messages

Watch Need for Speed Movie Online Free Megashare

Watch Need for Speed Movie Online Free Megashare
In spite of its video game stemma Need for Speed will nearly attract comparability to the recently-famed Fast and Furious enfranchisement. Waugh asserts that Need for Speed is aiming realness - that his take on metro neighborhood rushing is an exact view the
social group.
[b][url=http://snapjudgment.org/watch-frozen-movie-full-online-free-megashare]watch frozen online free megashare[/url][/b]
[b][url=http://snapjudgment.org/watch-300-rise-empire-movie-online-free-megashare]watch 300 rise of an empire online free[/url][/b]
[b][url=http://snapjudgment.org/watch-need-speed-movie-full-online-free-megashare]watch need for speed online free[/url][/b]
[b][url=http://snapjudgment.org/watch-divergent-movie-full-online-free-megashare]watch divergent online free[/url][/b]
[b][url=http://snapjudgment.org/watch-noah-movie-full-online-free-megashare]watch noah online free[/url][/b]
[b][url=http://snapjudgment.org/watch-captain-america-winter-soldier-movie-online-free-megashare]watch captain america the winter soldier online free[/url][/b]
[b][url=http://snapjudgment.org/watch-raid-2-movie-online-free-megashare]watch the raid 2 online free[/url][/b]
[b][url=http://snapjudgment.org/watch-dom-hemingway-movie-online-free-megashare]watch dom hemingway online free[/url][/b]
[b][url=http://snapjudgment.org/watch-afflicted-movie-online-free-megashare]watch afflicted online free[/url][/b]
[b][url=http://snapjudgment.org/watch-island-lemurs-madagascar-movie-online-free-megashare]watch island of lemurs madagascar online free[/url][/b]
[b][url=http://snapjudgment.org/watch-under-skin-movie-online-free-megashare]watch under the skin online free[/url][/b]
[b][url=http://snapjudgment.org/watch-alan-partridge-alpha-papa-movie-online-free-megashare]watch alan partridge online free[/url][/b]
[b][url=http://snapjudgment.org/watch-nymphomaniac-volume-ii-movie-full-online-free-megashare]watch nymphomaniac online free[/url][/b]
[b][url=http://snapjudgment.org/watch-rio-2-movie-full-online-free-megashare]watch rio 2 online free[/url][/b]
[b][url=http://snapjudgment.org/watch-draft-day-movie-full-online-free-megashare]watch draft day online free[/url][/b]
[b][url=http://snapjudgment.org/watch-oculus-movie-full-online-free-megashare]watch oculus online free[/url][/b]
[b][url=http://snapjudgment.org/watch-only-lovers-left-alive-movie-full-online-free-megashare]watch only lovers left alive online free[/url][/b]
[b][url=http://snapjudgment.org/watch-railway-man-movie-online-free-megashare]watch the railway man online free[/url][/b]
[b][url=http://snapjudgment.org/watch-cuban-fury-movie-ful-online-free-megashare]watch cuban fury online free[/url][/b]
[b][url=http://snapjudgment.org/watch-transcendence-movie-full-online-free-megashare]watch transcendence online free[/url][/b]
[b][url=http://snapjudgment.org/watch-heaven-real-movie-full-online-free-megashare]watch heaven is for real online free[/url][/b]
[b][url=http://snapjudgment.org/watch-bears-movie-full-online-free-megashare]watch bears online free[/url][/b]
[b][url=http://snapjudgment.org/watch-haunted-house-2-movie-full-online-free-megashare]watch a haunted house 2 online free[/url][/b]

Quote from: rootseric;136
Need for Speed World is the free to play online racing game where you decide how to play in a massively multiplayer world.
Free to play,but pay to win, cheat/hack to win. I'm playing this game for like 2 or more years,but with the release of achievements it's unplayable. Why? because of this

MSI ti 4200 128 MB and Problems with "Need for Speed: HighStakes"

Does any one know of a fix for "Need for Speed: HighStakes" with the new 45.32 drivers. When trying to start this game it won't even load, the screen goes dark for a second and then falls back to the desktop. Did the same thing with 43.45, but if I install the drivers that came with the Video card ( I think they were 31.XX) then the game works fine. Haven't come across any other games that won't run except this one, some examples that work fine are UT 2003, C&C: Generals, Warcraft 3, Hot Pursuit 2.
System:
XP pro OS (sevice pack 1) DirectX 9
Athlon 1800
512 MB RAM
MSI nforce 2 Main board
MSI GeForce 4 4200 ti 128 MB 8X AGP
Thanks for any info.

well I "bugged" the game makers (EA) and the response is that the game doesn't suport Windows XP. Strange that the older nVidia 31.xx drivers work fine with the game. Also played it on my last machine which had XP and a ATI radeon video card. OH well who ever said Direct X was supposed to be backward compatible.
Too bad the older drivers don't work so well with the newer games.

How to stop doing LIV for the goods which are rejected during quality check

Hi,
My client requirement is
1. System should not allow doing LIV for complete quantity entered during GR, but it should be as per accepted quantity after quality inspection has been done.
For. ex. Vendor sends 100 quantity of item X. GR will be done for these 100 in system under quality inspection stock type. Now during quality inspection, 80 have been accepted and 20 have been rejected. Now while doing LIV system will propose amount for 100 quantity and not for 80. My client wants system should propose for only 80 and not for 100. How to do it?
2. Vendor performance report based on the above indicating total quantity accepted, rejected and supplied for a material for a given period.
We do not intend to use QM module.
My suggestion for above is,
1. Do the GR as GR blocked stock - movement type 103 for 100. Then transfer 80 to unrestricted stock under movement type 105. Return 20 to vendor under movement type 124. If done this way system will propose amount only for 80 during LIV.
2. Create Z report to capture the above for vendor performance report.
Is there any other way by which above can be achieved? Is doing GR block stock for all the receipts correct?
Your suggestions are welcome.
Thanks,
Satish

Hi Satish,
The scenario can be mapped as per your sugestions. I don't see any issues with that. The process can be defined for selective vendors.
Regards
Sindo

How to Optimize SCXI 1600 for speed with Thermocouples

I'm working on a data acquisition system for my engineering firm and I'm trying to find a way to use our new thermocouple system as fast as possible.
The requirements for the DAQ process are:
Read 32 voltage channels from a PCI-6071E card
Read 32 thermocouple channels from a SCXI-1600 with an 1102C accessory
Complete the entire operation in under 5ms (this is so other parts of the program can respond to the incoming data quickly and trigger safety protocols if necessary)
Using LabVIEW 7.1 and MAX 4.4, I've got the voltage channels working to my satisfaction (with traditional DAQ VIs) and the rep rates I measure when I run the program are around 1ms (I do this by putting the DAQ code in a loop and reading the millisecond timer every time through that loop, then calculating the average time between loop executions). I have been trying to get similar performance from the thermocouple channels using DAQ Assistant and DAQmx. Some of the problems I've encountered are:
Very slow rep rates with 1-sample and N-sample acquisition modes (300-500ms)
Good rep rates when I switch to continuous mode, but then I get buffer overflow error -200279.
When I attempted to correct that error by setting the DAQmx buffer to overwrite unread data and only read the most recent sample, the calculated sample rate went to 20ms. It was around 8ms when I left the error unhandled and continued acquisition.
At this point I'm out of ideas and am just looking for something to try and optimize the DAQ process for speed, as much as is possible.
Thank you for any help.

I guess I would be interested in checking out your code to see if there is anything I can recommend on changing. However, I do have a few general Ideas of how to improve your performance. These recommendations are purely based on what you could be doing to slow down the speed of the program because I am not sure how exactly you have everything set up.
-Are you setting up the task and closing the task each time that you read from your daq card?  the way to get around this is to only have the DAQmx read vi in the while loop so you do not have time alloted for opening and closing the task each time.
-Try using a Producer/Consumer architecture. This architecture uses queues and splits the aquisition with the post processing.  Here is a link to how to set up this architecture and some information on when to use it.
Application Design Patterns: Producer/Consumer
http://zone.ni.com/devzone/cda/tut/p/id/3023
Message Edited by Jordan F on 02-06-2009 04:35 PM
Regards,
Jordan F
National Instruments

Best practice for speeding up animation...

Hi,
What would be best practice for speeding up an animation? - Increase the frame rate, or is that considered cheating (already set to 25)?
The alternative would be to manually adjust the length of the tweens on each layer.
~ Let me know what you'd do.
Thanks!

Keep the frame rate as low as possible to create acceptable smooth tween and adjust the length (amount of frames) of the tween on the timeline. By keeping frame rate low you are reducing the amount of code execution per unit time (i.e. 24 FPS or 0.04167 seconds per frame)

I've installed bootcamp 4.0 on my iMac 27. Everything works superb, but for playing need for speed run or battlefield 3 I need catalyst driver 11.7 or higher. How can I update my graphics? Is there a possibility except waiting for a new bootcamp version?

I've installed bootcamp 4.0 on my iMac 27. Everything works superb, but for playing need for speed run or battlefield 3 I need catalyst driver 11.7 or higher. How can I update my graphics? Is there a possibility except waiting for a new bootcamp version?

But how do you install the drivers if Bootcamp is running interference?
Bottom line, I'ev tried to install three different versions of updated ATI driver sover the last few momnths and on each and every occassion have ended up with the original Bootcamp driver. A number of current games are unplayable on a Mac running Bootcamp as a result.
And if I can't run the software I want, then Bootcamp is as useless as boobs on a bull.

Wy douse the bridge override time to live for individual jms-messages?

Hi, we have a problem with time to live for individual jms-messages.
          We have a JMS-bridge (ASYNC) between two wls, one application publish a jms masseage on a jms queue with the QueueSender. When the message i sent we set the time to live for the jms-message.
          The bridge then transport the jms message from one wls to the an other. When the message i received on the subscriper side the message time to live is no longer set to the value we specified, the value is now overrided with the default time to live value set on the source ConnectionFactor.
          How do prevent the override of the time to live value.
          Regards
          /Johan

Hi,
          If the target destination is WL 9.0 or higher you can configure the bridge to preserve message properties -- the MBean attribute name is "PreserveMsgProperty".
          Alternatively, if source and target destination are WL 9.0 or higher, you can configure WebLogic store-and-forward instead of a bridge.
          Finally, if the expiration time is always the same relative to the current time at the point when the bridge forwards the message, you can administratively configure the target destination with a "TimeToLiveOverride" (via the destination configuration itself - not the bridge configuration).
          Tom

Nokia 5800 windows live for mobile

Right I'm trying to install windows live for mobile, and according to HERE, my phone should be compatible. I have followed all the steps on the support pages, but can not find "windows Live" in my "download" folder.
Any ideas???

Oops, sorry for the typo
Just checked Skype Mobile, too, but it's also not on the list. Yoy may still want to try and download Fring - you may have luck.
Otherwise, the only officially supported Skype client for 5800 is IM+ which is not free:
http://www.shapeservices.com/en/products/productivity.php?deviceid=1416
Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
If I've helped, use the Kudos button to thank

TS1277 I am trying to purchase extra lives for a game app and a message pops up saying 'your purchase cannot be completed' go to a website for support???

I have tried to purchase more lives for a game app. It asks me for my password - I enter - it returns saying the purchase could not be completed - go to www.ipad support - How do I correct this?

You need to contact Support
http://www.apple.com/support/itunes/contact/

My Ipod Touch 2nd Gen Only Charges To 20% and Lives For Like 10mins Then Turns Off? HELP!

Theres These Little Rod Like Things Where You Plug The Charger Into And Some Are Bended or Missing And It Only Charges To 20% and Lives For Like 10mins Then It Dies I Dont Know What To Do.

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

PL/SQL: Optimize for speed

I've got a very simple function that i need
use to order the result of a SELECT.
I takes two parameters. One is the current code (that keeps changing with the values of
the SELECT), and the other does not
change.
I'm using Oracle 8.1.5 under Linux and i'd
like to optimize this for speed.
Any suggestions?
Thanks a lot!
FUNCTION OrdenarNomenclator2 (CurrentCode in varchar2, CodeToFind in varchar2) return number IS
BEGIN
IF CurrentCode LIKE CodeToFind| |'%' then
IF CurrentCode = CodeToFind then
return 20;
ELSE
return 10;
END IF;
ELSE
return 0;
END IF;
END;

Ferran,
There is an overhead in calling stored functions. Try this as an expression in your select:
decode(CurrentCode ,CodeToFind,20,decode(substr(CurrentCode ,1,length(CodeToFind)),CodeToFind,10,0))
which seems quite fast.
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Ferran Foz ([email protected]):
I've got a very simple function that i need
use to order the result of a SELECT.
I takes two parameters. One is the current code (that keeps changing with the values of
the SELECT), and the other does not
change.
I'm using Oracle 8.1.5 under Linux and i'd
like to optimize this for speed.
Any suggestions?
Thanks a lot!
FUNCTION OrdenarNomenclator2 (CurrentCode in varchar2, CodeToFind in varchar2) return number IS
BEGIN
IF CurrentCode LIKE CodeToFind| |'%' then
IF CurrentCode = CodeToFind then
return 20;
ELSE
return 10;
END IF;
ELSE
return 0;
END IF;
END; <HR></BLOCKQUOTE>
null

HT4539 I sign up for the racing post app each month but didnt print past invoices off and now cant find them anywhere and need them for my books how do i find them

I sign up for the racing post app each month but didnt print past invoices off and now cant find them anywhere and need them for my books how do i find them

If you wish to submit comments to Apple, the best way is to use their feedback pages.
http://www.apple.com/feedback/itunesapp.html
It's not likely that anyone from Apple will see your comments here among the thousands of other posts.
Regards.

Optimize for Speed = LV runtime error in file CCGArrSupport2.c (LV2009 / MCB2400)

Hello,
I have a MCB2400 and LV2009 and the normal Code-Generation works fine. But if I try the Run-Time Option: "Optimize for Speed" I always get this Error:
"LV runtime error in file ...\CCGArrSupport2.c at line 2621: 6 3"
I already tried a workaround, which helped somebody for blackfin: http://forums.ni.com/ni/board/message?board.id=420&thread.id=811
But it didn´t help in my case.
bye
amin
Solved!
Go to Solution.

Hi,
you are right. In the example it was just a Problem with the output.
Now here is one little part of the project which brings the runtime error allone, which brings the runtime error (just if the optimize option ist activated).
The Black Node is a Sub-Vi.
bye & thanks
amin
Message Edited by aminat on 10-23-2009 09:02 AM
Attachments:
PUB.zip ‏15 KB

Need For Speed: Carbon & Intel iMac 2.8 GHz

Hello All,
I just bought *Need For Speed: Carbon*. I thought I met the requirements, but some other forumes discuss the ATI card may not be enough for the game. The game gives me the error "Cannot locate the DVD-ROM", although it is clearly inserted. I followed the instructions exactly, installed it onto my iMac, and then typed in the CD Key provided on the booklet.
*My Apple iMac* from 2007 has 2.8 GHz, Intel Core 2 Duo, with 2GB DDR2 SDRAM. 800MHz Bus Speed and L2 cache of 4 MB. I am using an _ATI Radeon HD2600_ graphics card. I am running Mac OSX 10.5.7.
*Need For Speed: Carbon's* requirements for the game are Mac OSX 10.4.9 or higher, 1.83 GHz Intel Core 2 Duo or faster, 512 MB RAM or more, 8x or faster DVD-ROM drive, 5.3 GB or more free space on HDD, and finally video cards Nvidia (7300 or better), *ATI (X1600 or better)* +Note: GMA950 integrated graphics adapter is not supported.+
Help!? I have all the required specifications. I don't understand why it isn't accepting the program and not booting at user prompt. Thanks in advance.
Message was edited by: mojolevy (Morris Levy).

EA has some information on this problem here. If that doesn't help, you may want to take this up on EA's own forums.
Good luck.

Live for speed (racing sim) vs bt's packet shaping

Similar Messages

Maybe you are looking for