Live help for Premiere Elements 9 (paid support)?

I posted a question last evening, and got a very friendly answer (thank you, again!) - but unfortunately, I am still trying to figure my problem out.  I even subscribed to Lynda.com and watched the tutorials for the program - but it does not address my issue.
Does anyone know of a service/program professional that I can call/email and pay for answers to these types of questions?  I've just used "JustAnswer.com", and after 2 hours, am still waiting for a "computer professional" that is versed in the program.  Adobe support cannot help with "usage" questions - just problems with installation, errors, etc.
I REALLY, REALLY want to love this program, but I am starting to worry that it may just not suit my particular needs.  But before I abandon it, I want to exhaust all possible avenues of help!
Thanks again for taking the time to read my post - and offer whatever suggestions you may have,
Kim

(Just about every thing is explained in help - just keep looking and searching help until you find it).
1. Adding a "shadow/highlight" over a particular person in a moving clip
This requires the creation of a white circle that you slightly superimpose over the picture simply by putting it on an above track and setting the level of it to very low - just enough to see the faint circle.
It can be a graphic (same pixels as movie) quickly made in Paint or Photoshop or a camera shot of a white card.
If the graphic has a fuzzy edge then highlight edge will also be fuzzy.
Zoom and move it about as for your point 4
Trying to follow movement is a bit trickier as you would have to shift it at least 2 frames at a time.
Alternately you can use the chroma key effect except you insert the same picture in the hole as the background then reduce the level of the background picture to make it darker.(see help)
2. Being able to "tag" or add keywords to clips that I've edited in the timeline for See answers to your other posts
Whats wrong with an old fashioned simple notebook and pencil and note the time, changing it if you change it's position.  I use one all the time - much quicker.
3. Repeating a clip in slow motion. Requires making a copy and slowing it down.
Set a break point at the beginning or end of the section to be repeated
Select and Copy the section
Paste insert it into the point where you want the section be repeated.
Select the new copied bit
Change it's speed
If you want normal speed audience noise instead of strangly slowed down or hollow sound you can first unlink the audio & video and place enough of a third copy of the original audio again in the audio gap that would otherwise appear.
(Note Many function are found by right clicking on various areas of the screen)
4. Zooming in on a particular portion of a clip.
Click on the preview screen and drag the markers to zoom or reposition to suit

Similar Messages

  • How can i get live help for premiere elements 11

    how can i get live help with premiere elements 11

    Click I STILL NEED HELP at this next link for Premiere Elements chat
    -http://helpx.adobe.com/contact.html?product=premiere-elements&topic=activating-my-product- or-serial-number-issues

  • Need chat operator help, for Premiere elements

    Hi, suddenly on adobe premiere, I have problems with the graphics card. I would like to have help on chat, I do not know how to do, I can not continue to use it

    Hello,
    you could open a ticke, please use: https://www.adobe.com/cfusion/support/
    If you need more help >>> Get support >>> Need more support? Contact Us >>>
    Italian: http://helpx.adobe.com/it/contact.html
    România: http://helpx.adobe.com/ro/contact.html
    Here a telephone list:
    http://www.adobe.com/special/eeurope/index.html >>> change
    Italia >>> http://www.adobe.com/it/# or
    România >>> http://www.adobe.com/ro/#
    BUT maybe this could help you already:
    Italian: Adobe Premiere Elements 11 * Requisiti di sistema and Adobe Premiere Elements 11 * Requisiti di sistema
    România: http://www.adobe.com/ro/products/premiere-elements/tech-specs.html
    Good luck!
    Hans-Günter

  • Can't find help files for Premiere Elements 4.0

    I tried this procedure and it made no difference at all. I contacted tech support and they suggested re-installing the software. That didn't help so I tried this fix again and still had no access to help withing Premiere Elements 4.0.
    Then I got an idea ...
    What if I used a help client from some other adobe software such as acrobat reader 8 for example.
    Low and behold, I now have hlep running in Premiere Elements 4.0.
    Who'd a think it?
    W.B. Carss
    [email protected]

    W.B. thunk it! :)

  • I just downloaded and paid for Premiere elements but now want the combined Premiere and Photoshop elements. How do I do this?

    My headline says it all. I would like to turn my Premiere Elements order into the combined Premiere and Photoshop Elements download offer. I have already paid for Premiere Elements but would like to take advantage of the combined offer for only another $40 or so. How do I do this?
    I only downloaded and paid for the Premiere Elements package about two days ago.
    Todd Sauve

    Todd Sauve
    Did you purchase Premiere Elements 13 from Adobe Direct? If so, are you within 30 days of that purchase? If the answer to both of those questions is Yes and it appears to be, then you should explore
    Contact Adobe Chat clicking on the following link
    Contact Customer Care
    Premiere Elements
    Membership, Account, Payment
    Payments, Invoices, Orders
    Chat Panel
    If the link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
    Under the conditions mentioned at the beginning of this reply, I am speculating that Adobe should be able to give you your money back for the Premiere Elements 13, allowing you to purchase Photoshop Elements and Premiere Elements which are sold together, but are still really standalone products. How Adobe opts to do that is at its discretion.
    Best wishes
    ATR

  • Premiere Elements 8 & native support for Samsung AVCHD MP4 video?

    I'm excited about the release of version 8 of PSE and PE, but my big unanswered question is stated in the subject line: will Premiere Elements 8 natively support the MP4 files produced by my Samsung HMX-H104 ?
    I've been entirely unsuccessful with this file format and PE7.
    I've read throught the product descriptions and FAQ and Adobe makes reference to cameras from flash-drive camcorders, but doesn't offer any specifics. Native support looks like a crapshoot. Anybody with some insight to contribute?

    Thanks for pointing that out -- yeah, I see my error. I just did a little bit of web searching and it's not AVCHD. This seems to pretty well summarize it:
    http://www.camcorderinfo.com/content/Samsung-SC-HMX10-Camcorder-Review-34476/Format.htm
    "The Samsung ... outputs video in the H.264/MPEG-4 format (the file extension is .MP4). This highly-compressed video codec should not be confused with the competing AVCHD format. AVCHD is a type of H.264/MPEG-4 codec, but the version Samsung employs is different, with both benefits and drawbacks.
    "...the MPEG-4 video ... is adequate. ... this type of MPEG-4 is space efficient and less processor-intensive to edit than AVCHD."
    ...and...
    http://www.camcorderinfo.com/content/Samsung-HMX-H105-First-Impressions-Camcorder-Review-3 6130/Compression-amp-Media.htm
    "The Samsung HMX-H105 records video in the MPEG-4 AVC/H.264 format, the same as models from the previous years. MPEG-4 has clearly been adopted as the format of choice for HD camcorders, split into two camps. Sony, Canon, Panasonic, and most recently JVC, all use AVCHD, which is a subset of AVC/H.264. AVCHD experienced some serious stumbling blocks in its first few years, as existing hardware and software choked on the heavy data loads. It has, however, gotten much better in the past year. AVC/H.264 is also data-heavy, at least compared to old standard definition camcorders, but the format is easier to read. QuickTime can work perfectly with the files, and has the benefit of being free and dual-platform."
    I know this aspect has all been covered to death on these forums in the past, with respect to PE7 (which chokes on any Samsung .MP4 file I throw at it). While I've bookmarked the workaround posted by you in this thread (thanks!), I was hoping to avoid the extra steps à la native compatability with PE8.

  • Is Sony Handycam HDR-SR10 a supported device for Premiere Elements 10?

    Is the Sony Handycam HDR-SR10 a supported device for Premiere Elements 10?

    happyherbert
    I cannot give any guarantee as to whether you can make a USB connection between camcorder and computer/Premiere Elements 10 Get Media/"Flip, AVCHD, Cameras, Phones or Removal Drive"/Video Importer but it might work.
    But worst case, which is not so bad, is transferring the AVCHD files to the computer hard drive and then importing the files into a Premiere Elements 10 project with the program's Get Media/Files and Folders.
    If you have Full 1080i30, then the project preset that you would set before you import the files would be
    NTSC
    AVCHD
    Full HD 1080i30
    We can discuss more about settings when you have more details.
    You are at a disadvantage with Premiere Elements 10 on Windows Vista (32 or 64 bit). In that arrangement, Premiere Elements 10 is a 32 bit application with the limitations of 32 bit system. AVCHD is a rather resource demanding format. If Premiere Elements 10 were on specifically Windows 7, 8, or 8.1 64 bit, then it would be a 64 bit application that could take advantage of the 64 bit resources. All that would translate into getting a larger project taken to successful completion with a greater frequency.
    Please review and then we can go further into the details and then decide what next.
    Thanks.
    ATR

  • My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?

    My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?
    thanks

    for windows you should have an exe and a 7z file.  put both in the same directory and double click the exe.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Where can I find the PDF manual for Premiere Elements?

    Does Adobe have a full manual in PDF file format for Premiere Elements 9.0?
    P.S. Watch out for trying to handle large (> 700meg) AVI files.  Phone support says I'm SOL on bringing in my 6.5 gig 24 minute file.  Their solution?
    Bring it in small chunks or buy a new computer with more than 8gig of RAM.  Why don't they just tell you before you buy, that unless you have an awsome computer, don't waste your money on our software?

    Thanks John
    I have reviewed the online information, and the DVD's and still don't see a full blown manual (PDF file format or otherwise).  If all you get is the
    Using Adobe Premiere Elements 9
    Getting started with Adobe Premiere Elements
    Adobe Premiere Elements workspace
    Projects
    Capturing video
    , etc links
    Then you ain't getting much information.

  • Cannot Install the Raw 7.3 update for Premiere Elements 11 and photoshop Elements

    I get an error message when I try to update the  Raw 7.3 update for Premiere Elements 11 and photoshop Elements. It says to run support adviser which I did, but it says that it could not detect any problems.
    Thanks,
    Ron

    The next step will be to review the installation logs for the cause of the installation failure.  You can find details on how to locate and interpret your installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • CPU requirement for Premiere Elements 10?

    Hi there,
    Unfortunately, I think I know the answer to this already, but thought I'd toss this out there to see if anyone has gotten it to work.
    On a Windows XP sp3 PC with a 1.86ghz Core2 6300 CPU with 2gb RAM, I'm unable to install Adobe Premiere Elements 10. When I run setup.exe I get "This installation package is not supported by this processor type. Contact your product vendor."
    The system requirements for Premiere Elements 10 do list a 2ghz CPU with SSe2 support. The Core2 6300 does support SSe2, but runs at 1.86ghz not 2ghz.
    Just haven't seen a program actually refuse to install based on CPU speed before. Guess I've been lucky. But can anyone confirm that the installer actually won't install on a slower processor speed. Not sure what else the error could be than this.
    Thanks in advance,
    Sir_timbit

    I know about the min specs. The reason I'm asking if it really checks the CPU speed is I have a school that *is* running Premiere Elements 10 on the exact same hardware. Same CPU. The only difference is the new version I'm trying to install is the volume license version, part of the Adobe Digital School collection. The school that already has it running is using Premiere Elements 10 with either separate licenses or some other license setup. So it doesn't make sense why it worked but doesn't now.
    Testing today. On my test PC, a Core 2 6300 XPsp3, the setup would start up OK using the non-VL installer, but fail when I tried to use the setup.exe from the new installer. As far as I know the program is the same, but I don't think I can do the XML customizations needed to do a silent installer on the non volume licensed version of Premiere Elements 10. In short, why does one version of PE 10 install but not the other?
    Sir_Timbit

  • HELP! Premiere Elements 10 Video Exporting

    Hi,
    I'm a new PrElements 10 user, and I am on deadline and need some help, thanks! I'm new to video so talk any help getting me through this is appreciated.
    Here's the description of the project:
    ++ I'm making a cartoon video and am using CS5 with Premiere Elements 5.
    ++ It is for internet use: website, social media, YouTube.
    ++ I'm by importing jpegs made from .ai files in CS5. I'm not NOT shooting video or importing video into the project.
    ++ I'm giving the jpegs the appearance of animation by treating them through the use of FX, transitions, etc. I'm not using AfterEffects, so I cannot create animations that way.
    ++ The .ai files are sized in widescreen 16:9 at pixel size 800 x 450.
    ++ The jpegs were exported from these files with the resolution settings: 5 and 425 ppi.
    I mocked up a short video using some of the jpegs to make sure the settings were right before I did the whole project. Here are the problems I'm having:
    1.) the exported video is not showing in Widescreen. The video is goes all the way to the top and bottom of the screen but the ends are squashed in so the content and characters are distorted to appear taller and thinner than they should.
    2.) when i change the export settings, some of them correct the problem and some of them don't. This export preset works to get it into Widescreen but the file size is huge:  "MP4-H264 1920*1080p 24".
    3. Which brings me to compression. Does PrE have compression to resolve this issue- is it in one of the presets- what compression should I be using? Or do I have to buy a compression program? If so, what do you recommend?
    4.) Project Set-up: Is this where I went wrong? Which preset should I be using for this jpeg-driven project? How does that Project Preset affect the input settings and output settings? And should I be using jpegs or tiffs or native .ai files???
    5) My project preset is HD 1080i. Is this present affecting this exporting result?
     Thanks!

    You will find best advice over on the video forum. Most of us here are photographers.
    Click on the link below and copy and paste your question again. Good luck.
    Video questions: Click here for Premiere Elements Forum

  • Help with Premiere Elements 3.0,  won't work with Win7 Home Prem 64bit

    Does anybody knows if there's a patch or update for Premiere Elements 3.0 for Win7 Home Premium 64bit?  This software is a little bit old, but works great with my WinXP pro.  When I upgraded to Win7 Home, 64bit, Premiere Elements 3.0 would not work at all.  At first, I thought it was my hardware, but the software just crashed even without any video capture devices connected to my computer.  Any help is appreciated.
      Thanks!

    Well, there's no guarantee version 3 will work on Windows 7 at all -- let alone the 64-bit version.
    Have you installed the 3.02 patch for the software? That makes it Vista compatible -- and if anything will make it work, that will.
    Otherwise -- and assuming you've got the latest firmware for your video card and the latest version of Quicktime -- if it doesn't work for you, it simply may not. Sorry.

  • Where can I download the software for premiere elements 7

    I lost the CD software for Adobe Premiere Elements 7.  I searched on the Adobe site for the download and can't find it anywhere. I spoke to Customer service and they told me to come here and someone should be able to help me.  Does anyone know where I can download it and install it to my computer.  I still have the case with the serial number just don't have the software

    scoobynewarknj
    I do not see any opportunities for a free source of Premiere Elements 7 installation files.
    There is a web site that offers tryout downloads which you can install and then insert your purchased serial number into the install.
    However, they offer only the installation files for 9.0/9.0.1, 10, 11, 12, and 13.
    There may be very limited chances to purchase Premiere Elements 7 (Amazon may have some listed). You could do a Google Search for
    Premiere Elements 7 purchasing.
    If you purchased the product direct from Adobe, you "should" be able to obtain new installation files. Have you gone to the Adobe
    web site http://www. adobe.com, signed in, and, in the Search field, typed My Orders? Then you would follow My Orders to your orders where
    you should be able to pick out the order involved and download new Premiere Elements 7 installation files from that order. Did you explore that?
    Is it possible that the software can still be found at your location? Perhaps the bottom of a child's toy box?
    Please update us on any break troughs.
    Thank you.
    ATR

  • Lost my disc for premiere elements 8  s/n for software   where would i find a download for pe8?

    i lost my disc for premiere elements 8  and hd has been replaced   where would i find a download for this product   still have s/n of product  can someone help?  thanks

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 8:
    http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml

Maybe you are looking for

  • Problem with video

    I recently edited a reel on Final Cut Pro 4 and everything looked great when I watched it on Final Cut. Then I exported as a quicktime movie and when we watched it on a tv, the picture was all jumpy. I went back and looked at the footage in FCP and i

  • PO no.& PO dt. to be copied from contract to sales order at header level??

    Hi, I have a requirement, Purchase Order number & date has to be copied to the sales order (header fields below the SP & SH fields) when i create a sales order with reference to a contract. Can you tell which routine to be used in copy control?? Than

  • Query not fetching results and shows executing

    All, When I run a query from SQL Plus I am getting query results immediately table with more than 50,000 rows), but when I run from TOAD or PL/SQL Developer am not getting any result and all I see is query executing no error message also. Surprising

  • Problem while Starting J2EE Server

    When I am starting the J2ee Server , I am getting this error D:\>j2ee -verbose J2EE server listen port: 1050 Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/corba/se/internal/util/IdentityHashtable at com.sun.corba.ee.internal.java

  • Adapter setting for external system

    Hi, I have to connect external data system with CRM for BP & products. What type of adapter are available in CRM 4.0 to connect  to external system? What are the setting & where are located in CRM How to ensure that import is done 100% correct? Your