Live id problem in lumia710

my live id is not available at the moment... how to solve this problem..please do reply

Is this over wifi or data?
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Hello Mans and Womans! I live the problem to my iphone.While I was updating firmware update(my iphone is iphone 3G iOS 4.1.2) 4.2, the iphone gave an error(1015:error type).And now, the phone be rescue mode.I tried a lot of method, but ı didnt succesful

Hello Mans and Womans! I live the problem to my iphone.While I was updating firmware update(my iphone is iphone 3G iOS 4.1.2) 4.2, the iphone gave an error(1015:error type).And now, the phone be rescue mode.I tried a lot of method, but ı didnt succesful it.Please help mee!!

You can try putting the iPhone into DFU mode and see if that will let you restore and remove the jailbreak:
http://osxdaily.com/2010/06/24/iphone-dfu-mode-explained-and-how-to-enter-dfu-mo de-on-your-iphone/
Some jailbreaks cannot be removed and in some cases will permanently disable your iPhone. If that happens to you, then you will have to buy a new iPhone; Apple will provide no support, warranty or out-of-warranty, for a jailbroken iPhone.
You're on your own from here. We can provide no further help with a jailbroken iPhone in these forums.
Good luck.

KT3 Ultra-ARU SB Live! problem when using onboard Promise MBFasttrak 1

Hello !
I have one little problem with my motherboard. I know it's a little bit older compared to today's MSI production.. I have a MSI KT3 Ultra-ARU motherboard. I used only VT8233A southbridge's IDE until now, and everything worked perfectly. But now, I bought two Maxtor 80GB disks and placed them to a onboard Promise MBFasttrak 133 Lite (PDC20276) RAID in stripping mode. Everything works, except Soundblaster Live!. The soundcard itself works normally, but when I start to copy some files (and have some MP3's or video's running) the audio gets distorted in rythm with data transfer. I checked IRQs or address spaces, but IDE is on another IRQ than any other device, the same is address space. Had anyone the same experience with this "problem" ? Please let me know...
My configuration:
MSI KT3 Ultra-ARU
AMD Athlon XP 1700+
256MB RAM DDR 333
2x Maxtor DiamondMax 9 80.0GB
nVIDIA GeForce4 Ti 4200
ATi TVWonder
RTL8029 ethernet card
SoundBlaster Live! 5.1
Teac CD-E540 cd-rom
Sony DRU-190A cd-rw

Hi,
I think you should install at least the VIA RPP patch (http://www.viaarena.com), maybe also the patch from http://www.georgebreese.com.
Hans

Live Data / Problem with file permissions

Just trying out an old version of Dreamweaver MX 2004. I am
using my webhosting service for remote server/testing server
duties. It is running PHP 4.3.10 and MySQL 3.23.58. I was able to
set up the database connection and test-retrieve a recordset with
no problems. In following the tutorial I found that Livedata
wouldn't work, it just giving me a warning about file permissions
being wrong. It turns out that when Dreamweaver creates a temporary
file of the work-in-progress to upload to the remote server the
file is created on the server with owner=rw, group=rw, world=r
which explains why it won't run - group has to be set to group=r.
The file is created on the fly and then immediately deleted by
Dreamweaver so it is impossible to manually set the permission on
the server and probably fairly pointless too.
I tried just saving the file and previewing in the browser
which again causes it to be uploaded to the remote server. The
first time this resulted in the browser offering a file download
box instead of running the page. The reason is - again - that
Dreamweaver is setting the uploaded file permissions to include
group=rw. If I manually set the permission for group to group=r it
runs fine.
It turns out that Dreamweaver is always setting the file
permissions on file uploads (checked php and html) to the
remote/testing server to include group=rw. Once I set it manually
on the remote/testing server to group=r for a php file everything
is fine and subsequent uploads of the same file do not change it
again.
I checked with the webhosting company and their second-line
have reported back to me that the default file permission they set
on uploaded files includes group=r so it must be DW that is causing
the problem by setting group=rw the first time. I confirmed this by
using WS-FTP to upload the same file (renamed) to the same target
directory and the permissions set were owner=rw, group=r, world=r.
So
Can anyone please tell me how to change the permissions DW
sets on files written to a remote server because I have spent
countless hours on it without success. From looking at other posts
in this forum it could be that other users are hitting the same
kind of problem with DW8

Stop using Live Data with a hosting account. Set up PHP and
MySQL locally on
your machine. That is how it's supposed to work. You
shouldn't test files on
the fly on a host as you write them. Change your test account
in DW to use
the local server. Upload your files to your remote server
after they are
fully tested.
Tom Muck
http://www.tom-muck.com/
"nigelssuk" <[email protected]> wrote in
message
news:[email protected]...
> Just trying out an old version of Dreamweaver MX 2004. I
am using my
> webhosting
> service for remote server/testing server duties. It is
running PHP 4.3.10
> and
> MySQL 3.23.58. I was able to set up the database
connection and
> test-retrieve a
> recordset with no problems. In following the tutorial I
found that
> Livedata
> wouldn't work, it just giving me a warning about file
permissions being
> wrong.
> It turns out that when Dreamweaver creates a temporary
file of the
> work-in-progress to upload to the remote server the file
is created on the
> server with owner=rw, group=rw, world=r which explains
why it won't run -
> group
> has to be set to group=r. The file is created on the fly
and then
> immediately
> deleted by Dreamweaver so it is impossible to manually
set the permission
> on
> the server and probably fairly pointless too.
>
> I tried just saving the file and previewing in the
browser which again
> causes
> it to be uploaded to the remote server. The first time
this resulted in
> the
> browser offering a file download box instead of running
the page. The
> reason is
> - again - that Dreamweaver is setting the uploaded file
permissions to
> include
> group=rw. If I manually set the permission for group to
group=r it runs
> fine.
>
> It turns out that Dreamweaver is always setting the file
permissions on
> file
> uploads (checked php and html) to the remote/testing
server to include
> group=rw. Once I set it manually on the remote/testing
server to group=r
> for a
> php file everything is fine and subsequent uploads of
the same file do not
> change it again.
>
> I checked with the webhosting company and their
second-line have reported
> back
> to me that the default file permission they set on
uploaded files includes
> group=r so it must be DW that is causing the problem by
setting group=rw
> the
> first time. I confirmed this by using WS-FTP to upload
the same file
> (renamed)
> to the same target directory and the permissions set
were owner=rw,
> group=r,
> world=r.
>
> So
>
> Can anyone please tell me how to change the permissions
DW sets on files
> written to a remote server because I have spent
countless hours on it
> without
> success. From looking at other posts in this forum it
could be that other
> users
> are hitting the same kind of problem with DW8
>

Windows LIve Messager Problems On N97

Hi Everyone
I wonder if anyone can help me. I have a Nokia N97 on the three network. I went to use Windows Live Messenger last week and it errored so I thought I would reinstall WLM again. I uninstalled the one on my handset and went to Planet 3 to download it again but it errors with connection lost. If I click on details it says it cannot locate the files and gives a whopping long url address. I manually entered this url an the server says the location does not exist.
I rang three and they were uselless and just went through what it says on the online help and then told me to take the phone to a Nokia Care Centre which is stupid as there is nothing wrong with the phone, it's their servers. I had this problem a few months back with Skype. THey said it was the phone and replaced it twice and it turned out to be their side.
Is anyone else on three having this problem? Also does anyone have the three version of WLM for the N97. I recall the version on mine as V3.2?
Many thanks in advance

Hi
I've solved the issue. Java Rutime Nokia v2 which I installed from the Nokia Beta Labs makes the download link error. I have uninstalled this and WLM has insatlled and works no problem.
Thanks.

Lumia 720 YouTube live streaming problem

I've problem in playing live YouTube videos in Lumia 720 even im using a wifi connection..... Error : sorry, video cannot be played on your device

I am having the same problem with all three windows phone 8 devices. Videos on youtube play fine on 3G/H/H+ network status. But fails to play while connected through wifi. I have set the preference in internet explorer browser for mobile version of webpages.
On cellular network when I type youtube in bing and searched, it automatically sends me to the mobile version of youtube. I searched for videos in youtube srarch window and the results also open in mobile page format. so playing a video from there is not a problem.
Over wifi connection I searched the same on bing and as usually landed on mobile version of youtube page. Upto this everything is fine. But when i browse for videos on youtube page surprisingly it redirects me to desktop webpage format and never redirects to mobile page and in desktop version of youtube, most of the videos (almost all videos) will not play without Adobe flashplayer.
The same problem is occurring for all of my three windows mobile 8 devices.
I think this is a "nasty trick designed by youtube" to receive (steal?) information what kind of networks as well as devices people are using and behave that way, irrespective of the fact that I am using a mobile phone, they will treat me as viewing videos in a desktop computer.
Nokia and Microsoft must look into the matter seriously and should provide us a solution.
Attachments:
youtube problem.jpg ‏42 KB

Live picture problem with dreamweaver CS4

Hi all,
I am having problems inserting images onto my website. In design view I can view all images perfectly, however when I run the website live the images fail to display. Instead of the picture, the name of the picture appears with a red error cross in a box. These pictures are in the appropriate format (e.gjpeg & gif) so I am very confused and not sure what to do.
I would really would appreciate if anyone could assist me with this.
Thanks guys.

Sure thing, code below;
<div id="header">
<h1 class="themaintext"><span class="verdana_font"><span class="headingmain"><img src="Images/Corgi Logo.jpg" alt="Corgi Logo" width="140" height="153" hspace="5" />A1 Home Services Ltd</span></span> </h1>
</div>
Ive also attached some of the images I am trying to put on the site. Thanks.

Windows live mail problem

This is shivraj, from pune
i have use windows 7 pro and windows live mail 2011 since 2010, but suddenly i have to face a problem,
i have to move mail in reference folder,
change mail subjects and date and data and show old mail,
how to solve

Hi Shivraj,
You're asking this question in the wrong forum, this forum is for reporting issues with the forums themselves, not product support. Your best bet to get some help with this issue will be to post in the Live Mail forum here:
http://answers.microsoft.com/en-us/windowslive
Good luck.
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

Design View differs from Live view problem

I have Dreamweaver CS5.5 with Mac OS 10.7.3 on an iMac. I have the same set-up on a Macbook Pro 17
The problem is that the Design view is showing different fonts and not picking up layout as per CSS style but the Live view is all correct.
All is fine on the laptop so it is my iMac specific glytch
I have checked the settings for diplaying CSS styles and they are ticked
I have switched off the activation settings for Suitcase Fusion 3 in case of conflict there
I have uninstalled and reinstalled Dreamweaver
I think it a font-related problem as the design view only seems to want to display non-serif fonts.
Am I doomed to only use the lap-top in my web work?
I hope someone can advise as I am rather frustrated

I think that's just the way it is...
http://forums.adobe.com/message/4312435#4312435
Martin

"Code & Design" and "Code & Live" view problem i am getting in Dreamweaver CC 2014

Please anyone help me.
I have 2 webpages, one is with 12 columns fluid grid based and another is without fluid grid based.
Both are open in same site folder in Dreamweaver CC 2014.
I want to resize/edit my fluid grid div column in design view.
But i m not getting the proper menu (view-->Code and Design)
why the problem is happening ?
If my non-fluid page is active for edit purpose than i am getting the "View"-->"Code and Design"
if my fluid page is active for edit purpose than i am no getting the "View"-->"Code and Design"
but i am getting "View"-->"Code and live"
i am unable to resize my fluid div using the resize handler.
this is fluid based, i need "code and design view"
this is non-fluid based

There has been much discussion about this lately. You can add your vote for a return of Design View below.
Provide "Design View" for Fluid Grid Webpages
It's an "improvement" made to the October release to promote more people to use Live View editing in FGLayouts. As we're finding out, the removal of Design View in FGLayouts is severely impacting people's workflows.
Workarounds:
Step back to CC June release from links below
Win: http://download.adobe.com/pub/adobe/dreamweaver/win/cc/Dreamweaver_14_LS20.exe
Mac: http://download.adobe.com/pub/adobe/dreamweaver/mac/cc/Dreamweaver_14_LS20.dmg
or put an X in the FGLayout CSS comments
Change this:
Dreamweaver Fluid Grid Properties
dw-num-cols-mobile:        5;
dw-num-cols-tablet:        8;
dw-num-cols-desktop:    12;
dw-gutter-percentage:    25;
to this:
Dreamweaver Fluid Grid Properties
dw-num-cols-mobile:      X;
dw-num-cols-tablet:        8;
dw-num-cols-desktop:    12;
dw-gutter-percentage:    25;
Nancy O.

Compound path and live fill problem

Hello experts
I really hope you can help me out with this one. I'm all new to Illustrator and have tried to find the answer to my question but without luck, so you are my last way out
I'm currently working on a logo of a football which I have drawn with the line segment tool. A football is made of pentagons and hexagons, and I want all the pentagons to have a color fill. For that I have used the live paint bucket. But if I apply an effect such as a gradient it is applied to each segment as many seperates. I then read that you could use compound path and that works with my lines but not with the live fill. Is there a work around for my problem or do you have any smart suggestions of what I could do ?
Thanks for your help in advance
Kind regards
Christopher

A few questions:
What AI version?
By "Live Fill" are you refering to "Live Paint"?
CS 6 lets you fill a stroke with a gradient. That may be what you used here.
Congratulations learning about "compound paths" on you own. That's a step in the right direction.
You can control a gradient fill across multiple objects by using the "Gradient Annotator" (under "View" or "G"). This allows you to set a gradient start and end point by dragging across your selected artwork. You can also edit the gradient sliders directly on the annotator.
If you ARE using "Live Paint", you can use the "Live Paint Selection Tool" (hidden under the Live Paint Bucket tool, or "Shift-L"), to select multiple Live Paint segments, then drag the annotator across all segments. The annotator is hidden when used with Live Paint (at least in AICS5).
I hope these tips are helpful.
Ray

BT Broadband, Xbox Live, Destiny Problems

Hello everyone,
I have just had BT Broadband installed on Monday (22/09) and everyday since I am regularly disconnected from Destiny on Xbox One.
I did not have this problem before with my old broadband provider (EE) and I can't seem to find anyone that works for BT to be able to help me (they blame Xbox Live).
Does anyone know the solution to this problem and why this only happens to Destiny?
I'm using a Home Hub 4, I did try to use my old router, but that doesn't seem to work now BT is installed.
Much appreciate any help!
Solved!
Go to Solution.

The BT homehubs 5's and possibly homehubs 4's are not compatible with games made by activision.
Activision games on xbox one, ps3 and ps4 use demonware port mapping to open the required ports for the game via UPnP.
Problem is that these hubs are not compatible with demonware port mapping. Clearly BT were only interested in getting their hubs working on tablets and laptops. They didn't test the UPnP for gaming at all.
You will very likely have a moderate or strict NAT in Destiny even if the dashboard NAT says open. This is because activision games don't use the standard xbox live ports.
Destiny on xbox one seems to require port 1200. But because the UPnP on the hub is not compatibile with the demonware port mapping it's not getting opened.
You should try setting up port forwarding to forward port 1200 to the xbox one. You would also need to port forward if you want to play other games by activision as well. For instance COD ghosts would need port 3076.
If your disconnections are caused by NAT this should fix it. Although there may be some other compatility problem as well that I don't know about.
Personally I ditched the home hub because of this incompatibilty and bought a new router. I have consistantly open NATs now in the xbox dashboard as well as activision games. Disconnections in Destiny are rare for me.

Live stream problem with FMS 4.5 + FMLE

Hi,
I've got a live stream (and DVR) setup using FMS 4.5 and FMLE.
The hardware for the FMS server we use is 2x Xeon E5645 2.4GHz, 32GB RAM, OCZ RevoDrive R3 X2 PCI-e SSD. Installed OS is CentOS 5.8.
We have 6 workstation PCs, each equiped with 4 BlackMagic Intensity PRO capture cards and FMLE 3.2. Using these PCs we stream Live video to FMS server.
Video stream is grabbed from HDMI cable, to BlackMagic Cards, which are encoding by FMLE using H.264 format, 700kbps bitrate per stream.
Video stream is published to server through RTMP stream, which is later saved for DVR in RAW format. We only keep 3 days of recording and delete the old ones.
Server and Encoder PCs are in the same network, connected by gigabit managed switch.
The problem I'm having is that after 10-15 hours FMLE starts to drop frames, because video buffer is increased. What I observed is that this happens immediately when Server CPU load increases above 60%.
Based on the above observation I decreased the number of channels streamed by the server to 10, which reduced CPU load. But the problem still persists.
Whenever I restart FMS and delete all DVR data, the CPU load (when streaming 10 live channels) is only 1%, but after 2 days CPU load increases to 50-60%.
Whenever I restart FMS and don't delete DVR data, the CPU load is 5-10%, and after 2 days it still increases to 60-70%.
Another thing I observed is that there is only single fmscore process running, but it has lots of threads which are switched on and off in split seconds. These threads are launched on different CPU cores, but at any given point in time the distribution of the load isn't equal among CPU cores. This leads certain CPU cores being loaded by more than 60% and frame drops start to occur.
For the moment there are just 10 users watching this service, so I don't think this load accounts for the problem.
Has anybody had similar problem, or know how can I optimize or finetune the system to run without problem? I would appreciate any suggestions.
Another thing I noted through last couple of days:
When I was restarting FMS the CPU load was reduced to 30%, but after 1 week past when I restart it CPU load only goes down to 75%. Everything is the same, nothing has been changed and there is no disk IO issues involved.
P.S. I've modified application.xml using these values:
<Scope>vhost</Scope>
<Distribute numprocs="5">app</Distribute>
<LifeTime>
<RollOver></RollOver>
<MaxCores></MaxCores>
</LifeTime>

Hi
How many channels are you publishing?
If there are too many channels, it is recommended to have one FMSCore process start for each of them. To do so, you will have to change the scope to app.
---snippet---
<Application>
<Process>
<Scope>app</Scope>
<Distribute numprocs="3">inst</Distribute>
</Process>
</Application>
Also, to delete older content, you will have to enable disk management. Refer http://help.adobe.com/en_US/flashmediaserver/devguide/WSeb6b7485f9649bf23d103e5512e08f3a33 8-8000.html#WSec225f632fa00875-23954b6f1300b641158-8000 for more info.

Windows live mail problems

Since Sept 9 I have not been able to download my email messages via Live mail and the btinternet server I can send emails even though I receive an error box with the following error codes 0X800CCC90 Sever error inactivity timeout and also 0X800420CD Livemail error and 0Z800CCC0F
I can access all my emails ( send and receive) via BTYahoo using Firefox and IE but can only send via Livemail. Can anyone offer me any advice about to solve this problem. I have looked and checked all my settings in LIVEMAIL and followed the BT advisor in checking all the settings but still cannot download my messages. I cannot understand how I can send messages after the server has told me that it has dropped my connection. I must still be connected, It must be an issue at the server, what can I do?

Check that you have the correct settings
http://bt.custhelp.com/app/answers/detail/a_id/44917

5Dmkiii live view problem

Hi All,
I'm having a problem with my 5d when it comes to live view. Occasionally, when I half press the shutter down, the mirror will flip but nothing will happen. I'm not sure if I've set a bizzare setting or if there is something genuinely wrong with my camera, but it's meaning I have to use my eyepiece until it stops having a tantrum.
Has anyone else experienced this or can anyone suggest a fix?
Thanks!

That's the camera focusing. The mirror flip up, then back down again once it achieves focus. If you don't want it, switch to LIVE MODE instead of Quick Mode.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Live id problem in lumia710

Similar Messages

Maybe you are looking for