Live media encoder not recognizing my camera

I am working on a MacBook Pro with a Sony PMW-EX3 HD camera connected through iLink with a Firewire 800. My iMovie recognizes the camera, so I know it is not the computer. However, in Live Media Encoder 3,1, I am not allowed to choose my Sony camera for input. It is like Live Media Encoder does not recognize the camera.
Any ideas?

I'm sure you checked this but just in case...
Is the camera on or in the mode to output to firewire when you have it connected to FMLE? I also have experienced devices not showing up when connected when the device is not on or sending out a picture. They also don't show up usually when you connect it or turn it on when FMLE is already running (which can be fixed by closing it and restarting the program).

Similar Messages

Adobe Flash Media Encoder not detecting internal camera

I'm running OS X 10.8.5 and it won't detect the camera. I've installed the latest update from Apple that's suppose to address this error. After installing the new update I reinstalled Adobe Flash Media Encoder and it still doesn't work. The camera is also not being detecting on Skype. Reisntalled this as well. Anyone running into the same problems post update?

Verify that you are using the latest Flash version that works with you system:
http://www.adobe.com/software/flash/about/
If you need to update, use your Mac's Disk Utility to repair permissions.
Then follow Adobe's instructions here:
http://kb2.adobe.com/cps/908/cpsid_90893.html
Be sure to uninstall your current Flash player before installing the new one.
Repair permissions again immediately following installation of the updated Flash player.
Be aware that the current Flash Player Preferences can be configured to block your camera in your Mountain Lion Mac's System Preferences. However, you still configure Flash settings as shown here: http://tinyurl.com/5kjv3
Message was edited by: EZ Jim
Mac OSX 10.8.5

Media encoder not recognizing second sequence

I have to sequences a full 2 hr edited project, I then created second sequences and copied first sequence over and edited to a 18 m inute compressed vid. I have my 18 minute sequence open and hilighted open my media encoder and my 2hr propject shows up. Have no idea what is going on can't seem to find fix any help
Video gal

teeman52 wrote:
I have my 18 minute sequence open and hilighted open my media encoder and my 2hr propject shows up.
Did you export it to media encoder with file>export>media ?
You could also export it straight from premier pro if it's giving you trouble instead of queuing it in media encoder...
or you hit this
and it's the two hour long sequence that shows up?

Adobe Media Encoder not recognizing audio

I have MXF file I need to encode on a daily basis, but AME shows there is not audio in the files. QuickTime plays (and exports) the files great with audio (showing the audio as 16-bit integer big endian) Anyway I can force AME to recognize the audio?

This is at a Television Station. Shows and Promos are digitally delived to the station in a multitude of formats to our "Master Control". They have a server that recieves the files and flips them (via Flipfactory Telestream) into a format our main HD playout server uses to playout to air. The output setting for this process can not be changed (might change in the future?).
I need the promos that these companies send. So I have to grab the flipped files from our "Master Control". The raw files that were sent are not a playable (for me) format. I can "flip" them manually using Quicktime, but I would like to be able to set up watch folders that AME can use to grab the various promos and flip them as they are recieved.
Hope this all makes sense...

Is the Flash Live Media Encoder 3.2 compatible with MAC Yosemite?

I am trying to download the Flash Live Media Encoder 3.2. I can download the file but when I try to open it, I get an error message that says "Image not recognized."
Is this media encoder compatible with Mac OS X Yosemite (10.10.2)? If not, are there any work arounds?
Thanks for your help!

Hi Aaron,
Thread on Apple Support Communities: https://discussions.apple.com/thread/3758993
As per the above thread, it would generally happen if the file is corrupt or in case of an unsuccessful download. I would appreciate if you could attempt another download and see if it helps. Meanwhile, I shall try researching at my end for a conclusive answer.
Regards,
Diana

Onlocation is not recognizing my camera

I have a Panasonic HPX300 and im shooting on dvcprohd connected via firewire, and when i turn OL on it reads "no video input found. connect a camera to your computer, or check your cameras connection and power" I have my camera on PC Mode. any help would be appreciated.
thanks
Sean

It's not that FMLE is not recognizing your camera.... FMLE is not recognizing your capture device (the iGrabber).
Just because a capture device can capture video as a file onto your computer doesn't mean that the device is made to deliver throughput video as a "live camera" source. There is a big difference between recording to a file, and passing video through as a source.
An inexpensive caputre device that FMLE can see is the Dazzle Video Creator Platinum HD. If you have a FireWire connection on your computer I would strongly suggest using the Canopus ADVC110 capture device (works like a champ -- no issues or errors).
If you change your capture device out to one that allows other software (like FMLE, XSplit, Wirecast, etc.) to see the video as a "source" then you'll be in luck. iGrabber simply does not have that capability. This isn't the fault of Adobe, it simply wasn't designed by iGrabber to be used in this manner.

FMLE is not recognizing my camera.

I'm using a Sony HDR-CX160 with an iGrabber connected via USB. FMLE is not recognizing the camera. Any suggestions?

It's not that FMLE is not recognizing your camera.... FMLE is not recognizing your capture device (the iGrabber).
Just because a capture device can capture video as a file onto your computer doesn't mean that the device is made to deliver throughput video as a "live camera" source. There is a big difference between recording to a file, and passing video through as a source.
An inexpensive caputre device that FMLE can see is the Dazzle Video Creator Platinum HD. If you have a FireWire connection on your computer I would strongly suggest using the Canopus ADVC110 capture device (works like a champ -- no issues or errors).
If you change your capture device out to one that allows other software (like FMLE, XSplit, Wirecast, etc.) to see the video as a "source" then you'll be in luck. iGrabber simply does not have that capability. This isn't the fault of Adobe, it simply wasn't designed by iGrabber to be used in this manner.

Adobe Flash Live Media Encoder

Hi,
I'm having a situation with Adobe Flash Live Media Encoder 3.2:
Please enter Primary URL in rtmp[t]://hostname:[portno]/applicationpath format. Special characters in URL are not allowed.
URL is provided by a third party website, but it accomplishes with this parameters, How can I get this working?
Thanks in advance.

FMLE will work with all devices which have direct show based drivers and give data in raw format. Here is a list of devices which have been tested and certified with FMLE - http://www.adobe.com/support/documentation/en/flashmediaencoder/FMLE_DeviceMatrix3.0.pdf

Capture Card for Flash Live Media Encoder

Hello,
I need help finding the best capture card for the flash live media encoder. Any suggestions?

The problem you have is that your game and FMLE are competing for CPU time. Running FMLE is very CPU-intensive because of the work of encoding video. When FMLE consumes all your CPU there is nothing left to run the game. Instead of cropping I would suggest that you change your monitor resolution to 1280x720 (this is still HD, just not 1080 "full HD"). Increasing the screen size then cropping it back down is just another task you are throwing at the CPU that it can't cope with.

No luck importing from SonyHandycam DCR-DVD650? I am using USB import to my MacBook that is running OSX 10.6.8. The MacBook is not recognizing the camera. Any ideas what the issue could be?

I am not having any success in importing my videos from Sony Handycam DCR-DVD 650 to my mac book. I am using the USB connection. The macbook is not recognizing the camera. The macbook is running OSX 10.6.8. Any ideas on what the problem could be?

http://support.apple.com/kb/HT2361 There's a recommendation that when using this camera to record in the 'Standard' format instead of VR format. So if you know what the setting was you used to record the disk that's a starting point.
According to this website the camera should be compatible with iMovie '11
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
So here's some steps to take to get the Mac to recognize your camera.
1. Try it more than a few times, sometimes it can take 2-4 attempts to get iMovie to recognize a camera for the first time.
2. Always get the power adapter for your camera out of the bag. Hook it to the wall outlet, then plug your camera into that. Don't run it off the battery.
3. With the camera plugged into the wall, in DV playback mode. Hit play and just let it play video out continuously, then reboot the Mac. As soon as you see the desktop, launch iMovie. Go to File Menu > Import from Camera and see if the Capture window opens with your video playing through.
4. Make sure iPhoto doesn't try to launch itself automatically when it detects your camera has been connected to the Mac. Sometimes it tries to steal the videos off of a camera and 'blocks' iMovie from seeing the camera when it's attached. So make sure iPhoto hasn't interecepted your camera and is not running at all when you launch iMovie
No guarantees, but some things to try

Media encoder not showing in cloud apps

media encoder not showing in cloud apps - I receive an error opening it and I want to reinstall but it is not in the download list

Hello, Adobe?

Can Adobe Live Media Encoder encode with Left audio only?

Hi all,
I have a live feed video that contain dual audio (left = Englisg, right = Chinese).
Can i use Adobe Live Media Encoder to encode with English audio mono ONLY so that FMS can stream it to user with left&right = English audio?
Thank you.

Are you talking about Adobe media Live encoder and "Adobe media Server"...Just can publish from "Adobe media Live encoder" and publish to "Adobe media server"..
This is a adobe media server forum...and your question it seems lies in the domain of encoders.

Media GO not recognizing Xperia S

Since the last update (6.2.B.1.96), Media Go stopped recognizing my Xperia S, and it makes PC Companion to hang. So, I cannot make backups, nor syncs nor modify the media inside my phone. I can do nothing. It's not the first time I face this problem. I used to have this kind of issues with my Sony Ericsson W508 also. Is there any known issue?

Good morning,
This morning, Media Go asked to be updated to 2.5a that I do. When reading the post of Eliote87 I have tried to wait to see If the phone is connected later.
I close Media Go. I unlock my Xperia S. I connect my Xperia S to my computer. PC Companion recognize the phone. Windows asked what to do and I answered "Transfer files with Media Go". Media Go opened without connecting the phone.
2 minutes later, the Xperia S is finally connected to Media Go.
I disconnect my phone from the computer and I let Media Go open. I unlock my phone. I connect my phone to my computer. PC Companion recognize the Xperia S after 10 seconds. Windows does not ask me what to do with the connected device (Media Go still running). Media Go does not recognize my Xperia S.
2 minutes 30 seconds later, the Xperia S is finally connected to Media Go.
I disconnect my phone from the computer and I let Media Go open. I open Windows Media Player. I unlock my phone. I connect my phone to my computer. Media Go does not recognize my Xperia S.
7 seconds after connection, both Windows Media Player and PC Companion have connected my Xperia S.
2 minutes 30 seconds after connection, the Xperia S is finally connected to Media Go.
This means that our problem is solved or must be read as "Media GO not recognizing Xperia S below a fair time of connection around 20 seconds".
In addition, why Windows 7 does not ask me what to do with my device when Media GO is running ? Is it due to Media GO ?
Xebeauxa

GOES Utility not recognizing 60D camera

Does anyone have any idea why the EOS Utility is not recognizing the camera when connected to PC. All functionality are greyed out.

Hello E092176,
We are glad to assist you with downloading images from your camera to the computer using EOS Utility. Windows XP is used as an example, but the procedures are mostly the same if you use Windows Vista,or Mac OS X.
Connect the camera to the computer with the USB cable supplied with the camera.
- Set the camera's Auto Power Off settings to [Off] before making the connection.
- Please see the related information for how to connect a camera to a computer.
Set the camera's power switch to <ON>.
EOS Utility starts automatically.
- If EOS Utility does not start automatically, click the [Start] button, then select [All Programs] , [Canon Utilities] , [EOS Utility] and then [EOS Utility].
- If you use Mac OS X, click the [EOS Utility] icon registered in the Dock. When the [Welcome to iPhoto!] dialog box appears, click the [Decide Later] button. If the iPhoto starts at this time, quit iPhoto.
- If a screen for selecting the program (application) appears, select [Canon EOS Utility] and then click [OK].
[start the operation for downloading images.]
- To download all images saved in the memory card, click [Starts to download images] in the EOS Utility window.
- By default, the downloaded images are sorted into folders by their shooting date, and are saved in the [My Pictures] folder on the computer. If you wish to change the destination for the downloaded images, click [Preferences] and specify the settings in the dialog box.
- If you click [Lets you select and download images], the images saved in the memory card will be displayed in the EOS Utility window so that you can select the images to be downloaded. For the details, please see the "Downloading selected images" section below.
The images are downloaded to the computer.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Media Encoder not starting from Premiere Pro

I'm having issues Exporting from Premiere Pro - I'd rather queue it through Media Encoder so I can move onto the next edit, but when I select Queue and Media Encoder opens, it doesn't do anything - simply sits there with "Not Currently Encoding" as opposed to importing the data to export.
Help?
Adobe Media Encoder, 6.0.2.81
Also installed other CC products Ps, Pr, Id, Lr, Ai, etc
I have run Adobe Updater but no updates available for Me.
Mac OS X 10.7.5 (Lion)
I am using Adobe Media Encoder through a Creative Cloud Membership subscription
Project is 6 minute film shot on Sony FS700 (AVCHD) and exports from Premiere Pro
No error message, just no action from the Application
Have not seen the problem before - most of my work is vi Canon 5D MK III, so maybe it's a Sony Codec issue? Though I have exported footage from this camera before though...
Apple MacBook Pro, 17",
I am using Mercury Playback Engine GPU Acceleration in Premiere Pro
Cheers

Finally got fed up and rang Adobe (if all else fails...)
Video Support Team Member opened my Library folder (Go\Go to folder...\~/Library/) then went into \Preferences\Adobe\Adobe Media Encoder\ and changed the folder called 6.0 to 6.0old (i.e. rename it to anything else), then hit Queue in Premiere Pro and the project successfully opened in Media Encoder and was able to start encoding.
Hopefully that helps someone else suffering the same issue!
Ollie

Live media encoder not recognizing my camera

Similar Messages

Maybe you are looking for