Live Monitor doesn't detects my updates

Hello all
Been browsing arround the forums, but could't realy find this issue
Question #1
I have installed a brand new windows, and the first thing I installed was LiveMonitor ver 3. I leted LM (LiveMonitor) detect what drivers needing updates, DL:ed them and installed them. After several reboots I had installed them all I though . So I rerunned LM and did another autocheck, and I got exactly the same result!
I went in and checked the driver versions manualy in DeviceManager, and there all drivers look updated.
The system I have is:
MSI RS480M2-IL
AMD Athlon 3500+ (130nm)
2*512 MB kingston KHX3200UL HyperX (I can't understand if that is an OK mem or not)
Question #2
Should I be able to run a 64-bit OS on this machine? I tried both Microsoftand Novell (SUSE). The Linux fails initializing a table while mounting SWAP, and stands in a DoNothingLoop. Numlock and CapsLock works fine though. When trying to boot from MS 64 bit CD, the computer doesn't detect it sa bootable . I even tried DL and ISO , burned it and got the same problem
well, thanx in advance and

Live Monitor and Live update only properly detect MSI's own drivers. If you installed Windows without using the MB CD with MSI's drivers or got them from a site on the web other than MSI then they won';t be properly detected. No matter as most of the drivers at MSI or on the CD are dated anyways. Better to roll your own setup than to deal with older drivers.

Similar Messages

[Z87 MPOWER] Monitor doesn't detect Video. LED-POST switches between numbers

Hey folks!
I build my first PC yesterday and sadly I came over a seemingly unsolvable problem. I made a test-run with the Motherboard on the box, GPU, PGU, RAM, CPU+Cooler. I started it and everything worked fine, but the Monitor doesn't detect graphic input! It detects the cable I uses (HDMI and AVG) AND that I plugged it into a PC, but it just switches into sleeping mode as soon as I start the PC! (The Monitor works fine on my laptop).
Now I removed the GPU and used the onboard graphics with HDMI connection - the same problem! Now, I only have one 8GB-RAM stick, and I switched it between all 4 slots just to be sure - nothing. I double-checked the two PGU cables I have connected (8pin and 24pin ATX) - everything seems fine!
I just can't find the problem and its driving me insane! The only thing that says that something might be wrong is this little LED thing on the mb, it switches between 10 / 19 / 15(I think, its to fast to see!) / 55 endless! That's definitely not normal is it?
Is someone able to help me? I don't want anything more right now than getting this working.
SPECS:
CPU: Intel Core i5-4670K 3.4GHz Quad-Core Processor
Cooler: Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler
Motherboard: MSI Z87 MPOWER ATX LGA1150 Motherboard
RAM: Kingston 8GB (1 x 8GB) DDR3-1600 Memory
Asus GeForce GTX 770 2GB Video Card
PGU: SeaSonic 520W 80+ Bronze Certified Semi-Modular ATX Power Supply
Also if nothing works, can someone tell me what part might be the fault, so I can switch it in?
THANK YOU!

You may be able to repair this.
Remove the cpu and inspect the socket with a bright light and magnifier.
Fine the culprit pin and straighten it if possible. If not just RMA the board.

NI-XNET Bus Monitor doesn't detect port

Hi All,
I need somehelp. I have 2 PXI 8512 and set them to CAN1, CAN2, CAN3, and CAN 4.
I want to monitor data traffic from my XNET. Yes, they are available in MAX. But once i open NI-XNET Bus Monitor, all the channel i have are not detected. Interface Name box is empty, doesn't show anything.
Here is a screenshot.
Anyone knows what the problem is?
Thanks for help.
Rajamodol
Solved!
Go to Solution.

You are a great...
I have followed the pictures...
installing NI-XNET 1.6 my problem seems resolved.
Looking the png attached is possible to see that with vers. XNET 1.6 PXI 8512 is supported(this was my issue).
Now i can connect with varistand to CAN port.
Thanks again and bye
Nicola
Attachments:
forum1.PNG ‏166 KB

Problem with updates on live monitor

hi all
im new brazilian user, and my english is so bad, so sorry
my problem is, if i lose my cd of drivers, how can i update those ?
because now, i have formated my pc and install live monitor 3.72
but the update (only for drivers to sound and motherboard) of drivers arent listed
a detail, I install first only the network driver, to after update everything with "live monitor'(3.67 ok!)
but now with 3.72 i cant do at this way
so, this is my problem..
sorry for bad english
and thanks for all
msi k7n2 delta2 lsr

you can find everything you need at the support page for this board:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=617
click to left to select Driver or Utility
alternatively, download the Nforce system drivers (AGP GART, Mem Controller, IDE Controller, Audio, Lan etc) from Nvidia:
http://www.nvidia.com/object/nforce_udp_winxp_5.10

Updated to Mavericks. Now theres tons of activity in my terminal and my activity monitor doesn't seem normal. I want to think someone's hacking me, but i need experienced help please!

I spent all night trying to fix this. It seems to me that someone has been trying to hack into my system with all of the random codes/lines in my terminal and i have all of his foreign IP addresses. And now i get this strange message that popped up in my terminal. Idk what it entirely means? I would very appreciate if someone could just walk me through this. Thank you very much.
First time poster. I have Macbook Pro. OSX. Just downloaded the new mavericks. I'm i have my firewall on. I stay secure. I run Netbarrier, Virusbarrier, IdentityScrubber.
I know something is a little odd or just doesn't make since about my activity monitor. Then my WiFi was hacked last night and this person was writing tons lines of commands/codes that i found in my terminal and my activity monitor doesn't look normal, and I've only been a mac owner for about a year now and i'm learning more and more but while trying to figure out what was going on this message popped up which concerned me the most. Any help would be most appreciated, thanks guys. I have my terminal full of his foreign ip addresses i noticed, and a lot of other commands and lines he wrote out that i definitely did not type myself. Can anyone give me a hand on this? Thanks
--- 192.168.1.103 ping statistics ---
10 packets transmitted, 0 packets received, 100.0% packet loss
Extol:~ FBI$ who
FBI      console Nov 7 02:14
FBI      ttys000 Nov 7 04:33
Extol:~ FBI$ whois
usage: whois [-aAbdgiIlmQrR6] [-c country-code | -h hostname] [-p port] name ...
Extol:~ FBI$ whois 192.168.1.103
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
# Query terms are ambiguous. The query is assumed to be:
#     "n 192.168.1.103"
# Use "?" to get help.
# The following results may also be obtained via:
# http://whois.arin.net/rest/nets;q=192.168.1.103?showDetails=true&showARIN=false& ext=netref2
NetRange:       192.168.0.0 - 192.168.255.255
CIDR:           192.168.0.0/16
OriginAS:
NetName:        PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle:      NET-192-168-0-0-1
Parent:         NET-192-0-0-0-0
NetType:        IANA Special Use
Comment:        These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment:        These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment:        These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment:        http://datatracker.ietf.org/doc/rfc1918
RegDate:        1994-03-15
Updated:        2013-08-30
Ref:            http://whois.arin.net/rest/net/NET-192-168-0-0-1
OrgName:        Internet Assigned Numbers Authority
RegDate:
Updated:        2012-08-31
Ref:            http://whois.arin.net/rest/org/IANA
OrgTechHandle: IANA-IP-ARIN
OrgTechName:   Internet Corporation for Assigned Names and Number
OrgTechPhone:
OrgTechEmail:
OrgTechRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName:   Internet Corporation for Assigned Names and Number
OrgAbusePhone
OrgAbuseEmail:
OrgAbuseRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
Extol:~ FBI$
Extol:~ FBI$ hosts
-bash: hosts: command not found
Extol:~ FBI$ who
FBI      console Nov 7 02:14
FBI      ttys000 Nov 7 04:33
Extol:~ FBI$ whois
usage: whois [-aAbdgiIlmQrR6] [-c country-code | -h hostname] [-p port] name ...
Extol:~ FBI$ whois 192.168.0.0 - 192.168.255.255
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
# Query terms are ambiguous. The query is assumed to be:
#     "n 192.168.0.0"
# Use "?" to get help.
# The following results may also be obtained via:
# http://whois.arin.net/rest/nets;q=192.168.0.0?showDetails=true&showARIN=false&ex t=netref2
NetRange:       192.168.0.0 - 192.168.255.255
CIDR:           192.168.0.0/16
OriginAS:
NetName:        PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle:      NET-192-168-0-0-1
Parent:         NET-192-0-0-0-0
NetType:        IANA Special Use
Comment:        These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment:        These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment:        These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment:        http://datatracker.ietf.org/doc/rfc1918
RegDate:        1994-03-15
Updated:        2013-08-30
Ref:            http://whois.arin.net/rest/net/NET-192-168-0-0-1
OrgName:        Internet Assigned Numbers Authority
OrgId:          IANA
Updated:        2012-08-31
Ref:            http://whois.arin.net/rest/org/IANA
OrgTechHandle: IANA-IP-ARIN
OrgTechName:   Internet Corporation for Assigned Names and Number
OrgTechPhone:
OrgTechEmail
OrgTechRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName:   Internet Corporation for Assigned Names and Number
OrgAbusePhone:
OrgAbuseEmail:
OrgAbuseRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
Whois Server Version 2.0
Domain names in the .com and .net domains can now be registered
with many different competing registrars. Go to http://www.internic.net
for detailed information.
No match for "-".
>>> Last update of whois database: Thu, 07 Nov 2013 13:19:14 UTC <<<
NOTICE: The expiration date displayed in this record is the date the
registrar's sponsorship of the domain name registration in the registry is
currently set to expire. This date does not necessarily reflect the expiration
date of the domain name registrant's agreement with the sponsoring
registrar. Users may consult the sponsoring registrar's Whois database to
view the registrar's reported date of expiration for this registration.
TERMS OF USE: You are not authorized to access or query our Whois
database through the use of electronic processes that are high-volume and
automated except as reasonably necessary to register domain names or
modify existing registrations; the Data in VeriSign Global Registry
Services' ("VeriSign") Whois database is provided by VeriSign for
information purposes only, and to assist persons in obtaining information
about or related to a domain name registration record. VeriSign does not
guarantee its accuracy. By submitting a Whois query, you agree to abide
by the following terms of use: You agree that you may use this Data only
for lawful purposes and that under no circumstances will you use this Data
to: (1) allow, enable, or otherwise support the transmission of mass
unsolicited, commercial advertising or solicitations via e-mail, telephone,
or facsimile; or (2) enable high volume, automated, electronic processes
that apply to VeriSign (or its computer systems). The compilation,
repackaging, dissemination or other use of this Data is expressly
prohibited without the prior written consent of VeriSign. You agree not to
use electronic processes that are automated and high-volume to access or
query the Whois database except as reasonably necessary to register
domain names or modify existing registrations. VeriSign reserves the right
to restrict your access to the Whois database in its sole discretion to ensure
operational stability. VeriSign may restrict or terminate your access to the
Whois database for failure to abide by these terms of use. VeriSign
reserves the right to modify these terms at any time.
The Registry database contains ONLY .COM, .NET, .EDU domains and
Registrars.
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
# Query terms are ambiguous. The query is assumed to be:
#     "n 192.168.255.255"
# Use "?" to get help.
# The following results may also be obtained via:
# http://whois.arin.net/rest/nets;q=192.168.255.255?showDetails=true&showARIN=fals e&ext=netref2
NetRange:       192.168.0.0 - 192.168.255.255
CIDR:           192.168.0.0/16
OriginAS:
NetName:        PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle:      NET-192-168-0-0-1
Parent:         NET-192-0-0-0-0
NetType:        IANA Special Use
Comment:        These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment:        These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment:        These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment:        http://datatracker.ietf.org/doc/rfc1918
RegDate:        1994-03-15
Updated:        2013-08-30
Ref:            http://whois.arin.net/rest/net/NET-192-168-0-0-1
OrgName:        Internet Assigned Numbers Authority
OrgId:          IANA
RegDate:
Updated:        2012-08-31
Ref:            http://whois.arin.net/rest/org/IANA
OrgTechHandle: IANA-IP-ARIN
OrgTechName:   Internet Corporation for Assigned Names and Number
OrgTechPhone:
OrgTechEmail
OrgTechRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName:   Internet Corporation for Assigned Names and Number
OrgAbusePhone:
OrgAbuseEmail:
OrgAbuseRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
<Personal Information Edited by Host>

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

HT5167 after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

Windows Live Mail doesn't work in Firefox after recent updates to Windows 7. System Restore doesn't help.

Installed around 8 important Windows 7 updates over the past 3 days (so, nothing I could uninstall as they're security updates mainly). Since then, Windows Live Mail doesn't respond in Firefox. Did 2 System Restores and downloaded Live Essentials again but nothing works.

Did you try to clear the cookies as well?
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

Since updating to iOS 8.1 my Bluetooth doesn't detect any devices

Good Morning Denise -
Sorry to hear you are having issues connecting to your Wi-Fi network. I'll include a few more things that you can try to troubleshoot this below. The first thing that I'm wondering is if you cannot connect to your Wi-Fi at home -- are you able to connect to a different Wi-Fi network (at work, a local coffee shop, etc.)? That would be one of the first things to try.
Turning the modem and router in your house of and then on is also a common step as it "reinitializes" everything. Hopefully, one of the steps below will help you with this.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
http://support.apple.com/en-us/HT204051
Restart.
For more help, try restarting your device, router, or cable/DSL modem. After each step, check to see if you fixed the issue.
• Restart your iOS device.
• Unplug your router and plug it back in.
• Unplug your cable or DSL modem and plug it back in.
Still can’t connect?
Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you’ve used before.
Get more help
Try connecting to a Wi-Fi network in a different location. If your device can connect, you’ll need to get help with your Wi-Fi network. If it can’t connect to any Wi-Fi networks, contact Apple.
iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
http://support.apple.com/en-us/HT202068
All the best,
- Judy

U430 Touch doesn't detect second monitor

I recently got a U430 but, when I connect it to my Dell S2240L monitor using an HDMI cable, the U430 doesn't detect it. I've tested the monitor and cable. The display driver that came on the machine is from Intel (version 10.18.10.3379). The supported display driver listed on the Lenovo site is also from Intel but for an earlier version (10.18.10.3277). I've read a number of threads about a second monitor not being detected. Hase anyone else seen this?
Solved!
Go to Solution.

Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your U430 Touch Laptop is not connecting to the External Monitor, the issue should resolve if the latest display driver is installed in the computer, below are the link to automatically scan the computer and install the relevant driver from Intel and Nvidia:
Intel display driver auto detect
NVIDIA graphics driver auto detect
Hope this helps!!!
Do post us back if the issue persists
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I was wanted to update my iphone but the computer doesn't detected?

was trying to update my iphone with new software and backed up and everything but then something happened and the computer doesn't detected oit but is shows is charging and on iphone screen says connect to itunes?

Your iPhone has probably gone into recovery mode. Since, you have already backed up the iPhone there is nothing to worry about. Please follow this article, it would certainly resolve your issue
http://support.apple.com/kb/HT1808
Feel free to reply if you have any confusion.

Since update Bluetooth mouse doesn't detect

Updated last night, with new security update & may have also updated bluetooth firmware and since then my Microsoft bluetooth mouse doesn't detect, it worked perfectly before. Bluetooth detects phone so it is working. Are there any fixes to this?

Tried everything. Even tried detect new device. Mouse is definately working on other computer.
Tried Open Bluetooth Setup Assistant at Startup. At startup bluetooth icon briefly shows connected for a few seconds, then nothing.
Seems a lot of people on forum have lost mouse/keyboard connectivity since updating last night.
Would appreciate any help. Trackpad is def no comparison for photoshop etc.

Different live update 3 and live monitor results

Different live update 3 and live monitor results.
And manual downloads are different also.
Not sure which way to go.
All checked today
Drivers Tabs
Live Update 3 v3.79 shows
Update Date 2006/11/17
Via Chipset Driver v5.07a 7.10mb
Via Lan Driver v3.23.0.0417 996KB
AMD Away Driver v1.0.1.0 1.19MB
Live Monitor shows
Search Time: Sat, Nov. 25, 2006, 17:13:55
VIA Chipset Drivers 4.51 1.68MB
VIA LAN Drivers 3.23.0.0408 537.5KB
VIA Smart5.1CH Sound Drivers 6.14.01.4010 3.92MB
And these are from manually Looking up my MB
at Support Downloads Today
VIA Chipset 4in1 Drivers 5.09a 7587KB
VIA 10/100 LAN Drivers 3.32.0.0417 638KB
VIA Smart5.1CH Sound Drivers Driver version: 6.14.01.4120 (package:620b)3142KB

Quote from: Maesus on 27-November-06, 19:26:55
my take is... don't update if nothing breaks in your system. These are very fundamental drivers, the LAN and the Audio, most if not all of the features are already there and there won't be EXTRA features added by new updated drivers. Don't hope much! and don't update unless you really think it's necessary. Just my piece of advice. :D
I second to Maesus advice.

Since last update on itunes, my PC doesn't detect any of my devices. HELP!

Since I downloaded the last version of iTunes my PC doesn't detect any of my devices (ipad, ipod, iphone). Have been connecting my devices to the PC, when opening iTunes there is a legend, with the ipod saying that itunes doesnt detect the device to uninstall itunes and reinstall, have done it twice and the problem is still there. Just bought a new ipad and when I connect it to the PC iTunes doesnt detect it. When connecting my iPhone same thing happens, when I try to export the photos to the PC the folder where the photos are suppossed to be has no photos

Hello andreaparra,
Thanks for using Apple Support Communities.
I found the following article that will help you in resolving this issue, where none of your devices are being recognized by iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you get to the part where it asks you to uninstall iTunes, even though you have done it before, be sure to uninstall iTunes and the other components in the order listed.
Take care,
Alex H.

After 4.3.4 update the ipPad is in Recovery mode and iTunes doesn't detect the device

Hello,
brand new Win7 installation, restored iTunes folder and installed latest 10.4. iTunes64 bit.
Hooked up both my iPad and iPhone4
Detected new firmware 4.3.4
and bang, both devices are now stuck into recovery mode.
No matter I set the iPad/iPhone into Recovery or DFU mode, iTunes will not detect any device for recovery.
Uninstall/Install iTunes => no change
The driver will display that the units is detected and in DFU or Recovery mode, but iTunes doesn't detect the device.
Tried TinyUmbrella etc but no fix
Any other hint?
Best Regards
Uwe

Place the device in DFU mode (google it) then restore.

Win XP doesn't detect video adaptor

Hello,
Win XP Professional
MSI Mainboard MS-6380
VGA Card GForce 4
Has anybody a clue what might have happened (and hopefully how to fix it) when the system info does NOT detect any adaptor for my grafic card or the screen. As it is I cannot use the power of my video card (for example more than 16 bit depth in high resolutions) and cannot update any drivers. When checking Control panel -> Sýstem for the card it's not represented at all.
My MSN Live Monitor tells me that I have the correct BIOS (Live and Live VGA), the correct VIA Chipset drivers (but an old Realtek AC97 Audio driver (but doesn't matter to me?), the nVidia driver is reported as "unknown". I've downloaded the newest correct drivers and used the setup to install, but it doesn't reflekt any adapter and I still cannot use my card in full.
Maybe a dizzy quest, but please ask me more if it helps to give me useful info. I've already checked the card in the slot and it seems right. And MSI Live Monitor seems to "know" what card I'm using.
I've now tried everything and it still fails. I would be most greatful for any help.
Micke
Sweden

Thanks Richard for your reply,
I've tried to get what you asked for and can add anything you need besides this:
WinXP Pro SP 1 Build 2600
Motherboard MSI MS-6380E
Processor X86 AMD Athlon 1.20 GHz
Bios Am Megatr 07.00T. 2001-04-02
SMBIOS-ver 2.3
RAM 768 MB
MSI MS-Starforce GeForce4 Ti 4200
The IRQ report as follows (some swedish there but I guess you get it)
IRQ 0   System timer   OK
IRQ 1   Easy Internet Keyboard   OK
IRQ 3   Kommunikationsport (COM2)   OK
IRQ 4   Kommunikationsport (COM1)   OK
IRQ 6   Standarddiskettstyrenhet   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 10   Ljudstyrenhet för multimedia   OK (Audio)
IRQ 12   Logitech-compatible Mouse PS/2   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primär IDE-kanal   OK
IRQ 15   Sekundär IDE-kanal   OK
IRQ 17   CNet PRO200 PCI Fast Ethernet Adapter   OK
IRQ 18   Diamond Multimedia Systems SCSI-värdstyrenhet   OK
IRQ 19   Gina20 (WDM)   OK
IRQ 21   VIA Rev 5 or later USB Universal Host Controller   OK
IRQ 21   VIA Rev 5 or later USB Universal Host Controller   OK
IRQ 21   VIA Rev 5 or later USB Universal Host Controller   OK
IRQ 21   VIA USB 2.0 Enhanced Host Controller   OK
Then there was a report as below:
Conflicts / Sharing
I/O-port 0x00000000-0x00000CF7   PCI bus
I/O-port 0x00000000-0x00000CF7   DMA-styrenhet
IRQ 21   VIA Rev 5 or later USB Universal Host Controller
IRQ 21   VIA Rev 5 or later USB Universal Host Controller
IRQ 21   VIA Rev 5 or later USB Universal Host Controller
IRQ 21   VIA USB 2.0 Enhanced Host Controller
Minnesadress 0xA0000-0xBFFFF   PCI bus
Minnesadress 0xA0000-0xBFFFF   VgaSave
Does anything of this help!
Thank's in advance
Micke

Live Monitor doesn't detects my updates

Similar Messages

Maybe you are looking for