Live Office support for Microsoft 2010

Sorry if this is in the wrong forum- not sure where i would ask this.
My customers are starting to use office 2010 and are having problems with office 2010.
Does anyone have an idea of when office 2010 will be supported?
Thank you,
Dave

Please check note 1446026 http://service.sap.com/notes.
XI 3.1 will probably provide support for MS Office 2010 starting from SP4 (This is NOT XI 4.0)
Regards,
Stratos

Similar Messages

  • Support for Excel 2010?

    At what point does Oracle plan to add support for Excel 2010 (including 64 bit) to IOP?
    11.1.2.0 supports Excel 2003 SP1 and Excel 2007.
    Thank you.

    It will be supported in future release and we dont have specific dates or releases yet.

  • Installation of Live Office; Update for Office 2003 (KB907417)

    Hello,
    We are trying to install BOBJ Edge  3.1 on windows server 2003 R2 sp2 and office 2003 sp3.
    Live Office installation is getting cancelled with the following message.
    "Produkt: BusinessObjects Live Office XI 3.1 -- Update for Office 2003 (KB907417) was not detected on this  machine. Please install the update and re-run setup."
    We installed the mentioned update on MS Office but the message did not disappear.
    Does anyone have any insight on this issue?
    One problem we are guessing is that of MS Office language. We have MS Office 2003 installaed in Swedish. Does any of you think that can be the reason.
    thanks in advance.
    /Suman

    The solution for fixing 2003 with out upgrading to 2007 is to install this update
      Update for Office 2003 (KB907417)
    You can download this update from the Microsoft Download Center:
    http://go.microsoft.com/fwlink/?linkid=67959&clcid=0x409

  • MeetingPlace support for Outlook 2010

    We have a client running CUCM version 7.1.3.30000-1 and using Cisco MeetingPlace version 2.1.1.2.
    When my client migrated their users to Office 2010, they have been unable to use Meeting place, they get the following error:
    "unable to download, unspecified error web browser"
    As I have read this MeetingPlace version does not have support for Outlook2010 plugins, and we would have to upgrade to MeetingPlace 7.1 in order to solve this problem
    With this environment:
    a) Does MeetingPlace 7.1 support Outlook2010 plugins??
    b) Can we upgrade this meeting place version to a new one supporting Outlook2010 plugins??? Or We also would have to upgrade CUCM version??
    Thank you
    Enrique Villasana

    Enrique,
    1. Yes, MP 7.1 supports MS Outlook 2010. Please refer http://www.cisco.com/en/US/partner/docs/voice_ip_comm/meetingplace/7_1/english/release_notes/mp71rn.html#wp127737
    2. If MP needs to be upgraded to 7.1 then CUCM needs to be at 7.1.5 ( in 7.x series ). Please refer http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace,_Release_7.1_--_Component_Compatibility_Matrix
    Hope it helps ?
    GP.
    Pls rate helpful posts by clicking on stars below the post !!

  • Coded UI automation support for MIcrosoft Dynamic CRM 2013

    Hi,
    I have been checking for a UI automation tool for Microsoft Dynamic CRM 2013. Even though it is mentioned as coded UI fully supports Dynamic CRM, I was not able to automate CRM with VS2013, VS2015 Preview. Please reply if you have any workaround to make
    it possible to automate UI testing of CRM 2013 using coded UI.
    Regards,
    Vinu chandran.

    Hi Vinu,
    According to your description,
    could you please tell me what version of VS you use to test your coded UI test?
    In addition, I did some search and don’t find any information about CRM2013 support for Coded UI test.
    Based on this article:
    Supported Configurations and Platforms for Coded UI Tests and Action
    Recordings, Dynamics CRM web client is fully supported. Even though I am not sure whether it includes CRM2013, I suggest you should use VS to drag the crosshair
    on the control to check the control can be identified by Coded UI Test.
    In addition, since the issue is related to the Microsoft Dynamic CRM, I suggest you can ask the issue to
    Microsoft Dynamic
    CRM forum, may be you will get better support.
    As you said that you are not able to automate coded UI test with VS2015 Preview, because VS2015 Preview is still a preview version
    instead of final released version, I suggest that you should submit this feedback to Microsoft Connect feedback portal:
    http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx,
    Microsoft engineers will evaluate them seriously.
    After you submit the feedback, you can post the link here which will be beneficial for other members with the
    similar issue.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Where do I find live OnetoOne Support for Photoshop CS5?

    Hello,
    I have Apple OnetoOne but, unfortunately, they will not help me learn Photoshop CS5. It is understandable since Photoshop is not an Apple product. With that said, I still need to learn it. I really do not want to purchase the generic Photoshop tutorials and was wondering if anyone knows where I can get live OnetoOne support; where the tutor goes live with me on my screen and over the telephone and walks me through the steps. This is frustrating for me because I ultimately need to learn Photoshop in support of my iWeb designed website. Any suggestions would greatly be appreciated.

    Honestly, I have to lay it on the line. There is no customer service that can even shake a stick at Apple. With Photoshop CS5, a $1600 program, you only get 2 free phone support phone calls. How pathetic is that?! It is such a complicated program and not nearly as intuitive as Aperture. Granted, CS5 is far more advanced than Aperture but it doesn't matter if I don't know how to use it. So what I am left with? I feel as if, "I am but a fish caught in the net of an empty wind". I just wish Apple would come out with a much more advanced versions of Aperture and iWeb. Having to use third party software truly *****. In my new business, I am making high-end photobooks and I "have" to use this photobook software called AlbumDS. Unfortunately, AlbumDS is a plug-in for, you guessed it, Photoshop. As much as I love Apple, I hate how proprietary everything is and I just wish they would loosen the reigns a bit so that outside award winning software would be supported with Apple products.

  • Is there live telephone support for a recently purchased copy of Elements 12?

    Anyone know is live phone support is offered to new Adobe products....namely Elements 12?
    Steve

    Deactivate is for PSE11 and earlier. In PSE12 you use the Help> Sign Out menu. There should be nothing to stop you downloading the software as many times as you want, maybe it is a problem with the servers. Instead of downloading from your 'My Adobe A/c' download the trial instead - it is identical.
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en
    PSE12 allows you to install on as many computers as you have -  even dozens or hundreds. but only two can ever be signed in and activated at any one time.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • DAQmx support for LabVIEW 2010

    FYI to those downloading LabVIEW 2010 from NI web site:
    After Installing LabVIEW 2010 (download from web site), I noticed that there is no support for DAQmx (i.e.. VI libraries) in NI_DeviceDrivers-February2010 DVD (my latest copy).  Your have to download and install DAQmx 9.2 drivers (the first to include LabVIEW 2010 support).
    Additionally, If you were using Traditional NI-DAQ (Legacy) 7.4.4 VIs in a prior version of LabVIEW, you must do one of the following:
          1. Uninstall current Traditional NI-DAQ (Legacy) 7.4.4 installation and re-install after completing LabVIEW 2010 installation.
              Reason: Traditional NI-DAQ (Legacy) installs support only for the latest version of LabVIEW found on the system.
    Or
          2. Copy the the "<previous LabVIEW>\vi.lib\Daq" directory and all it contents to a new "<LabVIEW 2010\vi.lib\Daq directory.  This way you can use Traditional NI-DAQ in both versions of LabVIEW.

    I didn't have DVDs, I had to download.
    Yes it was a mess.  The device driver download took forever (NI can't help that).  The installation took beyond forever (what else can be done?). 
    I was disappointed that I had to do all of this backing up of legacy folders and restoring them after installing the device drivers.  Why does NI always have device drivers and toolkits install to the latest version of Labview only?  Why couldn't they leave the legacy stuff alone??  I still use LV2009 and wanted to try LV2010.  This involved a whole lot of trouble and time. 
    NI needs to provide a much easier way to upgrade, while still allowing previous versions to work without modification.  Most people who upgrade will not completely abandon the older versions.
    - tbob
    Inventor of the WORM Global

  • Is there any interface support for Microsoft MSMQ from Oracle AQ?

    Hi frns,
    Like Oracle's Native AQ Interface for Java , Is there any support for microsft?.
    Is there any way of posting msgs from AQ to MSMQ?
    Regards
    Sunil

    Take a look at DUMP_CSV function by Tom Kyte.

  • Toshiba Support for Microsoft Windows Service Packs ?

    Does Toshiba provide Downloads,
    for the Microsoft Service Pack
    ( For example Windows XP Service Pack ) ???

    The easiest way for you to find Information about Windows Service Packs is to surf on the Toshiba Website of your Country and look at Support & Download.
    There you find the a Category Microsoft Service Packs.
    The Link for Toshibe Europe for example is -> http://eu.computers.toshiba-europe.com/

  • Are Local Self Signed Certificates Supported for Exch 2010

    Hello,
    We have Exch 2010 and CUP 8.6.2.
    Trying to find out if local self signed certificate (without signed by internal or external CA) are supported?
    Thanks
    James

    Never mind. I figured it out.
    First of all, my Xserve certificate did not have the full FQDN, just a convenient subset. I created another self-signed cert with the true FQDN. I saw some hints around the web saying that Mail.app will always complain if the DN does not match.
    Second, it turns out that Keychain Access is where the local certs live, and in Tiger I needed to drag the cert to my Desktop, open it, and store it in the x509 section.
    All is good. Now to see how my iPhone likes the new certs...

  • Support for Microsoft Dynamics AX

    Does HP QTP/UFT support automation on Microsoft Dynamics AX ?

    Afraid do not have a definitive answer for you but you may find your answer here:
    https://mbs.microsoft.com/customersource/northamerica/AX/support
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • NO Live traffic support for N9 Drive app

    my N9 doesn't have live traffic report - don't understand why (my N8 had this months ago)

    Just because the MeeGo development team got shown the door this doesn't mean that "Live Traffic" is unavailable, but it does need to be switched ON if user not averse to a bit of Linux programming, although easier methods to be found over at talk.maemo.org
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • SCVMM support for Microsoft SQL Server 2014

    Hi
    Does anybody know if Microsoft SQL Server 2014 supported and/or does it work, when installing SCVMM 2012. Current documentation stills says SQL Sever 2012.
    Thanks

    hi,
    SQL Server 2014 is not supported: https://technet.microsoft.com/en-us/library/dn281933.aspx
    I did not test if SQL 2014 works.
    regards,
    Thomas
    Thomas Hanrath [MCT | Regional Lead Germany]
    Thomas Hanrath Private Cloud Blog
    Microsoft Learning and Certification Blog
    Follow me on Twitter

  • CUP 8 Support for Exchange 2010 Calendaring

    Will Unified Presence 8.5 support Exchange 2010 calendaring?
    Thanks!
    Jeff

    That's the plan. Nothing is guaranteed until it reaches FCS though.

Maybe you are looking for

  • Best Way to import items from final cut pro

    I have recently edited a video in final cut pro studio 1 and them compressed the file for dvd studio. However when i came to look for my file it was as a quicktime movie that dvd studio could not see. ie when i came to locate the file i dvd studio it

  • Error while deploying an adapter

    Hi, I'm trying to deploy the sample adapter. I have written the JAVA files and I am using the DeployTool to deploy them. The creation of the rar and ear files went all right, but the deployment does not work. The error message is: Cannot connect to h

  • My Cannon mf8580cdw wont send emails,

    we cant email documens via scan, the contacts on the address book is greyed out.  SO i cant select them.  help would be much appreciated.

  • Photosmart Plus B209a won't communicate with my computer

    I have a Photosmart Plus B209a, and I run 4 different laptops with a wireless connection They run Windows Vista, and Windows 7, and I can not print either. The Wireless hub was recently changed, but prior to that I could not print.  I get an error me

  • ObjectID from PageID

    Is there any way to obtain the objectID from a DatabaseID & PageID WITHOUT using DBCC Page. I'm returning Data from the Blocked Process Report and want to show which resource is being blocked. For certain locks means i need to find the ObjectID from