Live-Playback get´s more jerky with growing resolution

Hi all,
have a question concerning the playback of Live content
on my laptop with a i7 920 (shows 8 cores).
With growing video resolution the picture get´s more jerky:
720x576 ~ 5% CPU Power
1280x720 ~ 10% CPU
1440x800 ~12% CPU
1920x1080 ~15% CPU, all with 25fps.
All resolutions are encoded live with 4.5MBit Main Profile H264 and AAC. 720x576 and 1280x720 is perfect,
1440x800 little bit jerky, and 1920x1080 more jerky (every 1-5 sec a frame skip/drop/wrong sequence???)
Due my CPU Power seams to be enough I did not have an explanation for such a behaviour.
What could be the reason - is it possible to get the HD Resoltuions also smooth?
Thanks in advance
Klaus

Hi, this thread may give some insight, but keep in mind the Flash Player is not version 10.1. Also I don't know if this site would give any additional info for you or not, but you could take a look.
thread: http://forums.adobe.com/message/2600961#2600961
Site: http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html
Thanks,
eidnolb

Similar Messages

HT201318 I registered my apple ID and Icloud with a US address, and live in Switzerland. I do not own a US credit card. Now that I need to buy more storage with my swiss credit card, I can't change the country's billing address from the US to my swiss one

I registered my apple ID and Icloud with a US address, and live in Switzerland. I do not own a US credit card. Now that I need to buy more storage with my swiss credit card, I can't change the country's billing address from the US to my swiss one. HELP PLS?

Did you actually watch the movie? You get 30 days in which to view it and if you didn't watch it, that could be why you are getting that message. If you have watched the movie and you're sure that is has expired by now, contact iTunes Store Support and seek their help.
Change the country in the upper left. - and click on Purchases, billing and redemption to proceed.
https://getsupport.apple.com/Issues.action

Issue with live playback while editing - Premiere Elements 10

Hi there, It's been a while since I used Premiere, and decided that I would make a video. I've copied all of the media across and started editing the clip. I dragged the first clip onto the timeline and clicked the play button so I could find where I wanted to make the first cut. And there was no video, just a still frame from where the marker was. If I click the live playback area, it pauses the video and updates the still. I have tried updating the software to see if it was a bug that had been patched, but it's still there. I've never had this issue before, and would appreciate any help you guys could lend.
Thanks in advance,
-Chris.
Extra info:
OS: Windows 7 home premium 64 bit
Premiere version 10.0 (20110902.mol11.b123.280463)
Project settings [email protected] FPS, dslr preset in PAL
I'm working with mp4 files from my gopro.

I've been reading this with interest because I'm having the same issue since updating the nVidia drivers at the end of November. There is a conflict that is NOT resolved by completely uninstalling and rolling the drivers back.
Previews just will not display in the monitor in Adobe Premiere Elements 11. Audio is fine.
Clicking on the monitor window allows me to view the frame, and I can advance the frames one at a time and view them, but when I select 'Play' I just get a blank screen.
NOTE: SAME FILE AND SOFTWARE work fine on roommate's GTX550 with nVidia drivers from Jan 18 2013.
I'm running NVIDIA GeForce GTS 240,
Win7 64-Bit OS;
2.93 gigahertz Intel Core i7 870;
12 GB RAM;
Board: Dell Inc. 0G3HR7 A00 Serial Number: ..CN736040BU01GG. Bus Clock: 133 megahertz
BIOS: Dell Inc. A05 07/08/2010;
ASUS VE276 [Monitor] (27.2"vis, s/n B1LMTF048504, January 2011).
Up until the last driver update everything worked great.

I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!

I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!

I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/

Ever since installing on my 64bit Windows 7 install, Firefox has continually gotten more sluggish as time moves on, hangs for 10-15 secs at a time and just gets worse over time with the updates and everything.

Ever since installing on my 64bit Windows 7 install, Firefox has continually gotten more sluggish as time moves on, hangs for 10-15 secs at a time and just gets worse over time with the updates and everything. It was fast when I first installed, but over the last six mos has slown to a crawl.

upgrade your browser to Firefox 8 and try
* getfirefox.com

Workin in Live View when I press the zoom button to focus I get a white screen with a 5x or a 10x wr

Working in Live View When I press the zoom button to focus I get a white screen with a 5x or a 10x written. I don't get the zoom picture. It just started doing this today and I've been using it for years. Any help? Thank you. OH I have a 450D (rebel xsi)
Solved!
Go to Solution.

Which camera model?
Also, what are your exposure settings? Canon DSLRs do exposure simulation in live-view. So if the settings would result in an over-exposure you might be cropping in to view an all white area.
Tim Campbell
5D II, 5D III, 60Da

How do I get my new Apple ID associated with an older MacBookPro so that I don't get charged more than once for a purchased app when I download it to the older computer recently upgraded to Snow Leopard?

I recently upgraded my 2 year old MacBookPro to Snow Leopard so I could download Face Time and Final Cut ProX to it.
I've already purchased the apps and installed on my iMAC and Macbook Air.
After downloading Face Time I received the following mail;
"Your Apple ID, *************, was just used to purchase FaceTime from the App Store on a computer or device that had not previously been associated with that Apple ID.
If you made this purchase, you can disregard this email. This email was sent as a safeguard designed to protect you against unauthorised purchases.
If you did not make this purchase, we recommend that you go to iforgot.apple.com to change your password, then see Apple ID: Tips for protecting the security of your account for further assistance.
Regards,
Apple"
I don't want to be charged twice for these apps, especially Final Cut ProX, so how can I get the MacBookPro associated with the Apple ID I'm using now?
Cheers

This is probably a new precaution that Apple has taken to alert folks that something has occurred with their account that has not occurred before*, namely a Mac has downloaded something from their account that has not done so before. And as the notice says, if it was you doing so, then you may safely ignore the notice. Also, do not be alarmed, Apple refers to all downloads as purchases, even when they are free.
But if you are truly concerned about the notice then you can authorize the Mac with your iTunes account, which should be the same as your MAS account. Open iTunes on the older Mac and sign into your account. Then in the Store menu choose Authorize This Computer. Now this Mac is definitely associated with your account and can now play media that you purchase from the iTunes Store as well.
*My banks do the same thing when I pop up making a purchase with my bank cards somewhere in the world I have never made a purchase before. They call me and email me and want to know if it is indeed me using the card.

How come u dont get a cleaning cloth with the iphone any more

how come u dont get a cleaning cloth with the iphone any more

Apple doesn't read these forums.
Submit your suggestion at http://www.apple.com/feedback

Live View Preview is only available with...

When I select preview 'server' from the Browser Lab panel in Dreamweaver I get this message:
"Live View Preview is only available with BrowserLab Local/Network preview option, please select the Local/Network preview option."

Hi Mattdwm,
Yes this behavior is 100% correct, and what you observed about it only working if you toggle Live View off is what the error message was trying to tell you.
I'll try to explain - in Dreamweaver's Live View mode you can interact with your page "freeze" the javascript in intermediate states. The information about those states is only contained on the local machine. So if you were to perform a server preview from DW while in Live View, the page would only be in the base/default state in the screenshot captured by BrowserLab. So the only way BrowserLab can get the properly get the info about the intermediate state you've navigated to is if you choose the Local/Network preview option.
I suppose we could have implemented things so that it would not show you that message if you haven't done any interactions with your page in Live View, but I think that would actually be more confusing, as it would sometimes work and sometimes not work. And even if we could automatically switch over to Local/Network mode for BrowserLab while you're in DW's Live View mode, we probably wouldn't because we want that to be a choice made explicitly by our users.
Thanks for your interest in BrowserLab, I hope this helps,
Mark

How do I move/duplicate small objects without CC 2014 live corners getting in the way!?

Hi folks,
I'm finding a problem with live corners on the recent Illustrator CC2014 update...
Live Corners used to be a feature of the direct selection tool but now its on both types of selector as default... Much as I love live corners and use it all the time, its now impossible (or really bloody awkward) to move or duplicate (with holding alt and dragging) small rectangles. E.g if I wanted to duplicate out lots of small windows in a building for example. It just grabs a corner and makes its a circle. Zooming in gets around this but it doesn't really solve the problem. I'm also aware that you can turn the live corners off entirely but if I had to do that every time I needed it, we may as well go back to the days of effect>stylise>round corners.
Anyone else come across this new frustration or have a work around?
Tom
http://www.tomnapperdesign.co.uk

> @KrisHunt it's under View>Hide Corner Widget.
Oh, I thought you were talking about the gigantic corner handles, and being able to completely disable live rectangles. The internal rounded corner handles are not a problem for me because they are eternally hidden (via that very menu command) unless I specifically select one or more corners with the direct selection tool, which makes sense.

Trying to get this "One" sound with Logic pro 8

Hi everyone i spent like 2 hours last night trying to get this sound with Logic Pro 8 soft synths trying to find a sound exactly like or close to this sound: http://home.comcast.net/~tommykry/Weezer%20-%20Troublemaker.mp3
The sound can be heard at 00:19 and through out the song, its like a low bass synth kind of sound that drifts down when its hit, like a portamento kind of thing. In live weezer videos the bass player is hitting a pad on a keyboard so i know its a key sound not a bass guitar slide. ive heard this sound in trance and techno songs as well. I have Sonar 8 and pro tools 8 as well and can look there if i have too, also have an Access viress Ti, But im trying to do this all in Logic. Like i said i played around for like more than 2 hours going through most of all the Logic synths, patch after patch trying to find something close i could tweak, so if anyone has more experience with The Soft synths in Logic Pro 8 and can steer me in the right direction i would be greatful.
Thanks
Tommy

In live weezer videos the bass player is hitting a pad on a keyboard so i know its a key sound not a bass guitar slide.
He could just be triggering a bass slide sample...
It's some kind of bass sound that bends down, in a similar style to what a bass player might do. Whether it's a real bass or a synth is difficult to say (and probably doesn't matter a great deal), but in any case it's certainly compressed, and grunged up dirty with some amp sim or distortion...
Try that route...

Disable "Your computer may use more energy with these settings"

I frequently use my laptop for presentations or video chats, and I frequently have to turn off my screen saver and disable all my Energy management settings to prevent that stuff from showing up during a presentation.
However, every time I drag the Energy Saver timers around, I get the annoying message:
"Your computer may use more energy with these settings"
The box forces me to hit Okay to acknowledge this painfully obvious message. How do I disable this prompt from popping up every single time I adjust my Energy settings? Plist setting somewhere perhaps?

Thanks Livia and Huevoos (eggs??) for your interest in this post.
In a nutshell, I haven't been able to solve this. I gave up on Apple support after they proved useless.
As Huevoos suggested, and I confirmed it time and again after browsing thru endless forums, it seems that the user validation routine for the Mac App Store is done by looking into your network settings, which in my case are either incomplete or erroneous due to the broken-down ethernet. (I am still waiting for somebody more experienced in this forum to contradict or explain this).
So, because I still have wireless connection, I can use my machine for day-to-day chores, have not been able to purchase anything up to this date in the Mac App Store though. I'm waiting for either a software update that could correct this (Mountain Lion??? there's no guarantee only hope) or the moment when my machine will need to be replaced by a new one with a functional ethernet.
I'm sorry I can't be of more help. But I'm pretty much in the same situation as you guys.
Live long and prosper.
Brt1618

How do I get my data back with no duplicates

I need no duplicate EncounterNo even if I do this it still returns dupes. Any Suggestions would be deeply appreciated!
SELECT Distinct
PWLDBA.ENTORDER.ENTORDERNO,
PWLDBA.TESTREQ.ACCESSION,
PWLDBA.ENCOUNTER.ENCOUNTERNO,
PWLDBA.PATIENT.NAMELAST,
PWLDBA.PATIENT.NAMEFIRST,
PWLDBA.PATIENT.NAMEINITIAL,
PWLDBA.PATIENT.NAMESUFFIX,
'F' AS PATIENT_GENDER,
PWLDBA.PATIENT.SSN,
PWLDBA.PATIENT.DOB,
' ' As AGE,
PWLDBA.RC.DESCRIPTION AS ETHNICITY,
'NA' AS PATIENT_OCCUPATION,
PWLDBA.PATIENT.ADDR1,
PWLDBA.PATIENT.ADDR2,
PWLDBA.PATIENT.CITY,
PWLDBA.PATIENT.STATE,
PWLDBA.PATIENT.COUNTRY,
PWLDBA.PATIENT.PHONE,
PWLDBA.SF.SRCFAC,
PWLDBA.SF.SRCFACNAME,
PWLDBA.PATIENT.PID,
PWLDBA.RD.NAMELAST AS ORDERING_PROVLNAME,
PWLDBA.RD.NAMEFIRST AS ORDERING_PROVFNAME,
PWLDBA.RD.NAMEINITIAL AS ORDERING_PROVINITIAL,
PWLDBA.RD.NAMEDEGREE AS TITLE,
PWLDBA.RD.NAMESUFFIX,
PWLDBA.RD.PMRY_SFKEY,
PWLDBA.RD.ADDR1,
PWLDBA.RD.ADDR2,
PWLDBA.RD.CITY,
PWLDBA.RD.STATE,
PWLDBA.RD.ZIP,
PWLDBA.RD.CONTACTPHONE,
PWLDBA.RD.UPIN,
PWLDBA.RD.NPI,
PWLDBA.PATIENT.ITKEY_0,
PWLDBA.PATIENT.GROUP_0,
PWLDBA.TESTREQ.COLLECTED AS PRIMARY_COL_DT,
PWLDBA.TESTREQ.RECEIVED AS PRIMARY_REC_DT,
PWLDBA.PTRESULT.FINALSTAMP AS FINAL_COMP_DT,
'NA' AS CASECURRENTSTEPDESC,
'DIGENE' AS CASE_TYPE,
PWLDBA.TEST.SHORTNAME,
PWLDBA.TEST.TESTCODE,
'NA' AS LOCALSTANDARDCODE,
PWLDBA.PWSP.DESCRIPTION AS PRIMSPECDESC,
PWLDBA.TESTREQ.SOURCE,
'NA' AS SNOMED_CODES,
PWLDBA.TESTREQ.ICD9KEY_0,
PWLDBA.BILLING.DESCRIPTION,
PWLDBA.BILLING_CPT.CPTBILLCODE AS CPTCODE,
'NA' AS LOINCCODES,
'NA' AS UMLCODES,
PWLDBA.TEST.TESTCODE,
PWLDBA.ANALYT.DESCRIPTION AS RESULTNAME,
PWLDBA.PTRESULT.VALUE AS RESULT_VALUE,
PWLDBA.PTRESULT.VALUE AS HPV_DETECTED,
PWLDBA.TESTCOMMENT.D_COMMENT,
PWLDBA.PTRESULT.ABNRANGE,
'NA' AS CLINICALHIST,
'NA' AS SPECIMENSOURCE,
PWLDBA.TEST.NAME,
'DIGENE' AS HPVTEST_MFG,
'NA' AS ADDENDUM,
'SED MEDICAL LAB' AS LABCODE
FROM
PWLDBA.TESTREQ
INNER JOIN PWLDBA.PATIENT
     ON PWLDBA.PATIENT.SFKEY=PWLDBA.TESTREQ.SFKEY
INNER JOIN PWLDBA.ENCOUNTER
ON PWLDBA.ENCOUNTER.PATIENTKEY=PWLDBA.TESTREQ.PATIENTKEY
INNER JOIN PWLDBA.SF
ON PWLDBA.SF.SFKEY=PWLDBA.PATIENT.SFKEY
INNER JOIN PWLDBA.TEST
ON PWLDBA.TEST.TESTKEY=PWLDBA.TESTREQ.TESTKEY
INNER JOIN PWLDBA.PWSP
ON PWLDBA.PWSP.PWSPKEY=PWLDBA.TESTREQ.PWSPKEY
INNER JOIN PWLDBA.PTRESULT
ON PWLDBA.PTRESULT.TESTREQKEY=PWLDBA.TESTREQ.TESTREQKEY
INNER JOIN PWLDBA.PT
ON PWLDBA.PT.PTKEY=PWLDBA.ENCOUNTER.PTKEY
INNER JOIN PWLDBA.RD
ON PWLDBA.TESTREQ.RDKEY_0=PWLDBA.RD.RDKEY
INNER JOIN PWLDBA.ANALYT
ON PWLDBA.ANALYT.ANALYTKEY=PWLDBA.PTRESULT.ANALYTKEY
INNER JOIN PWLDBA.TESTCOMMENT
ON PWLDBA.TESTCOMMENT.TESTREQKEY=PWLDBA.TESTREQ.TESTREQKEY
INNER JOIN PWLDBA.BILLING
ON PWLDBA.BILLING.PATIENTKEY=PWLDBA.TESTREQ.PATIENTKEY
INNER JOIN PWLDBA.BILLING_CPT
ON PWLDBA.BILLING_CPT.BILLINGKEY=PWLDBA.BILLING.BILLINGKEY
INNER JOIN PWLDBA.RC
ON PWLDBA.RC.RCKEY=PWLDBA.PATIENT.RCKEY
INNER JOIN PWLDBA.ENTORDER
ON PWLDBA.ENTORDER.ENTORDERKEY=PWLDBA.TESTREQ.ENTORDERKEY
WHERE PWLDBA.TEST.TESTCODE in ('8191','721L') AND PWLDBA.TESTREQ.STATUS ='D'
ORDER BY PWLDBA.ENCOUNTER.ENCOUNTERNO ASC

Hi,
Whenever you have a question, please post a little sample data (CREATE TABLE and INSERT statements) and the results you want from that data. Explain how you get those results from that data.
If you can show your problem using commonly available tables (liek those in the scott schema) then you don't have to post any sample data; just the results and explanation.
Always say which version of Oracle you're using.
I believe your problem is very much like this:
Say you want to display one row for every ditinct job in the scott.emp table.
If you run this query:
SELECT DISTINCT
          job, ename, hiredate
FROM       scott.emp
ORDER BY job
,            ename
;you'll get these results:
JOB       ENAME      HIREDATE
ANALYST   FORD       03-Dec-1981
ANALYST   SCOTT      19-Apr-1987
CLERK     ADAMS      23-May-1987
CLERK     JAMES      03-Dec-1981
CLERK     MILLER     23-Jan-1982
CLERK     SMITH      17-Dec-1980
MANAGER   BLAKE      01-May-1981
MANAGER   CLARK      09-Jun-1981
MANAGER   JONES      02-Apr-1981
PRESIDENT KING       17-Nov-1981
SALESMAN ALLEN      20-Feb-1981
SALESMAN MARTIN     28-Sep-1981
SALESMAN TURNER     08-Sep-1981
SALESMAN WARD       22-Feb-1981because SELECT DISTINCT means that no row of output will be identical to any other row of output; it says nothing about individual columns. For example, there are two rows in the output above with job='ANALYST'; these rows are distinct, because even though the job column is identical, the ename column is different.
If you want only one row of output per job, like this:
JOB       ENAME      HIREDATE
ANALYST   FORD       03-Dec-1981
CLERK     ADAMS      23-May-1987
MANAGER   BLAKE      01-May-1981
PRESIDENT KING       17-Nov-1981
SALESMAN ALLEN      20-Feb-1981then you can run a query like this:
WITH     got_r_num     AS
     SELECT     job, ename, hiredate
     ,     ROW_NUMBER () OVER ( PARTITION BY job
                               ORDER BY         ename
                             )        AS r_num
     FROM    scott.emp
SELECT       job, ename, hiredate
FROM       got_r_num
WHERE       r_num          = 1
;Notice that, although the table contains two rows where job='ANALYST' this query displays only one of them, the one where ename='FORD'. Why didn't the query display the other row from the table, the one with ename='SCOTT'? Because of the analytic ORDER BY clause in the ROW_NUMBER function. "ROW_NUMBER () OVER (PARTITION BY job ORDER BY ename)" means that the ROWN_NUMBER function will return distinct numbers (1, 2, 3, ...) for each alue of job, with the first row in order by ename getting #1, the 2nd row getting 2, and so on. If there happened to be 2 or more rows with the same job and the same ename, then ROW_NUMBER would still assign distinct numbers to each one, but there's no way to foretell which of the rows would get the lower number.

How do I get fios to work with my new desktop w/ Windows Media Center

Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

Based on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

I have a Power Mac G4 and i am trying to get it to work with my LCD

I have a Power Mac G4 and i am trying to get it to work with my LCD Monitor/TV. The connection on the computer is DVI and the connection on the Monitor is DVI. The Monitor says in the manual to hook up computers using the DVI connection. When I connect the too the monitor says there is no video input. I tried changing the settings on the monitor from PC mode to DVI mode and nothing. I have also tried changing the display on the computer to a couple of different settings and nothing. Please Help?

Hi-
A little more info please.
What model G4?
What Graphics card?
What OS?
What model/make of monitor?
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan

Live-Playback get´s more jerky with growing resolution

Similar Messages

Maybe you are looking for