Live! SB022x (or any OEM model) owners with driver installation problems ... [Help 'maybe' he

Hi
Problems to get 'drivers'/'driver updates' installed for your Li've! or other SB models on XP or W2k system?
If ctzapxx.exe method didn't work either for you, have you tried 'forced' driver installation yet? If not here is what you can do.
NOTE: THIS METHOD DOES NOT WORK W/ ALL DRIVER PACKAGES, BECAUSE OF THE USED INSTALLER IS NOT THE SAME (ctcomp.dat is not available on those)
. download [url="http://members.aol.com/dvdking200/Pub/ctcomp.exe">this utility[/url]
2. download driver package (or installation ISO/rip) you want to install and extract it to your HD (you can also install Audigy X drivers for your Li've! card if you like)
3. run ctcomp.exe and point it to look from
- ..\Audio\Setup -folder, found as a subfolder in folder you extracted the ISO/rip
- 'main folder' (for. ex. AUD_EAX4DRV_0303) when you're installing driver update (data.cab must exist on that folder)
4. press Patch button
5. install your drivers by running setup.exe located
- at same ..\Audio\Setup -folder when setting up from extracted ISO
- at 'main' folder when you're installing driver update
.jtp
ADDON: ---------------------------------------------------------------------------------
I tested what ctcomp.exe makes to this installation package and here are the results.
INSTALLATION PACKAGE patched: Li'veDrvUni-Pack(ENG)
SUPPORTED CARDS by installer
BEFORE CTCOMP
;SBLi've!
;For CT4670, CT4620, M002/M003, CT4780, CT40, CT4830, CT4832, CT4870, CT4872, CT483, CT487, CT4760, CT4850
[Hardware.Map3]
ID = 00000020, 0000002, 0000002F, 0080022, 0080025, 0080026, 0080027, 0080028, 0080029, 008003, 0080032, 0080040, 0080050
ProductName = Sound Blaster Li've!
;SBLi've! 5.
;For SB0060, SB000, SB002, SB00, SB003, SB005, SB022, SB0222
[Hardware.Map5]
ID = 008006, 0080062, 0080064, 0080069, 008006A, 008006B, 008006C, 0080065
ProductName = Sound Blaster Li've!
AFTER CTCOMP listed only Li've! and older series cards
;SBLi've! 5. : For SB0060, SB000, SB002, SB00, SB003, SB005, SB022, SB0222, SB0228, SB0226, SB0223, SB0229
[Hardware.Map4]
ID = 008006, 0080062, 0080064, 0080069, 008006A, 008006B, 008006C, 0080065, 0080066, 0080067, 00000, 000000A
ProductName = Sound Blaster Li've!
;SBLi've! : For CT4670, CT4620, M002/M003, CT4780, CT40, CT4830, CT4832, CT4870, CT4872, CT483, CT487, CT4760, CT4850
[Hardware.Map4]
ID = 00000020, 0000002, 0000002F, 0080022, 0080025, 0080026, 0080027, 0080028, 0080029, 008003, 0080032, 0080040, 0080050
ProductName = Sound Blaster Li've!
;For SBPCI 52 : CT4790, CT4820, SB050
[Hardware.Map4]
ID = 0080023, 0080050, 008007
ProductName = Sound Blaster PCI52
;For SBPCI 256 : CT4890, CT489, CT4893
[Hardware.Map4]
ID = 008002A, 008002B, 0080033
ProductName = Sound Blaster PCI256
= No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
I think there is not.
.jtpMessage Edited by jutapa on 07-04-2006 08:6 AM

The reason i said this should be a sticky is that these boards move so fast that its impossiable for new comers to keep up with threads that have AWESOME tips that may or may not help but how many of us have accually gone through every post in the last 60 days to try and find a fix? I know I have not, but in the end you need to try everything you can.
Something like this is not on the Creative FAQ data base so the only people to know about this possiable fix are the few who catch it in time.
In my experience there is ALWAYS more than way to do things and 0 ways to get it to work with 20 other methods to run it. Thats a lot of ways to do the one thing. So unless we have a huge data base with every possiable fix,method or forceiable way to do something then more and more people will get really upset that Creative offer no help.
Take the way Creative say to un-install drivers, man, this for the most part never works, so something like this may be the only way to get it to work for some people.
What I do is though, I copy a thread like this one and will pass it on to others if need be. Ofcause with all credit to the original poster and I never pass it off as my fix and/work.
I I like to cover every possiable aspect to do something. Ya know what i mean

Similar Messages

Another New IPod Touch Owner with Wi-fi Problems

Another New IPod Touch Owner with Wi-fi Problems.
I have been working at this for about 4 hours now with no success and I am getting pretty frustrated, so if it show up in my typing please ignore it. I just don't understand why these multi-million dollar companies can't write a manual or put up a web site that can actually help someone with a problem.
Ok, venting aside.
I am running a gateway computer.
Operating System = XP
Router = Linksys WRT54G
I have two other computers that are working fine with the existing wireless net work and have been for some time.
I'm pretty good with my computer but haven't touched my router since initial set-up and all that was done was a basic set up.
My I-pod is searching for a network and I'm three feet away from it but it doesn't find it.
I printed out my wireless setting. I presume SSID name equals the name box on the ipod-touch
Security = WEP
What seems to be kicking my A$$ is the password. The route setting have never been changed so I would pesume the password should be the default "admin" which I put in (JOIN) and get the "Could not find network" screen
So, I have perused this message board trying to discover and answer to mine, and and apparently many others question with no definitive results.
So I guess what I and everybody else needs is a step by step how to guide on how to discover the info needed and enter in what we need to make this work.
Thanks in advance to anybody that can actually help with this issue. A step by step do this would be nice.

Thank you Terpfen for replying, and please excuse my ill temper earlier. I've calmed down some now.
Step: 1 followed step one previously, Main screen, settings, Wi-Fi. Also set power down to 5 min to give I-Pod plenty of time to find network.
Wi-Fi Network Screen.
Wi-Fi ON
Choose a Network (searching indicator) symbol spinning.
Other ...
Ask to Join Networks ON
At this point the I-pod does not find any networks available. The indicator just spins but never returns any results. I am 3 feet for my WRT54G router.
Hence the easy connect isn't connecting.
The next step. is to manually set-up the connection.
Main screen, setting, Wi-Fi, Other.
press "Other" which brings up two fields
Name __________
Security ___________
First Question? Which Name are they looking for. when I went to my router 192.168.1.1 It has the name linksys. However, when I go to my Wireless Network setting it has the name * ???? * which is different than Linksys router.
Now, since one of the goals here is file sharing I presume I should be using the Wireless Network settings name. (which I have tried.)
Next is security, Wireless Network setting indicate setting for WEP Once this is selected you then back-up to the "Enter Network Setting Screen" and you now have a password line added.
Now I have never set a password for the router so the password for the router is the default Password "admin" And I don't recall ever setting a password for my network setting. But, I only use about three different passwords and a cycled through them still with no success.
So, I need some expert advise on how and where to find the info to input into the required field to work or what I need to reset in my router to make this work.
Thanks again for anyone who has constructive input to resolve my and probably many other peoples issues with this problem.

Is there any way to sync with new pc? HELP!

Ok, so I have an ipod touch and a new computer. The old computer that the ipod was synced to was destoyed. Can anyone tell me if there is ANY way to sync with the new pc AND keep all the songs, games, pic, and everything? I don't want to lose everything!!

There are several shareware utilities that can be used to transfer some of your data such as music files from the Touch to the computer - search for "ipod" at VersionTracker. Contacts and calendar data will sync automatically when you use iTunes to sync the Touch, but be sure to get your music files and pics transferred first. Apps should sync normally.

Are there any Lenovo X220 owners with IPS that don't notice ghosting?

I need to pull the trigger soon and have been watching all the posts about fan noise, throttling and IPS ghosting.
Are there any users with an IPS screen who do not notice, or are not bothered by, ghosting on their IPS screen?
I would prefer IPS for the better viewing angles and color reproduction.

As far as I can tell, the two units I got all exhibit ghosting if I just let the screen idle for too long (assuming idle at max brightness for more than 15 minutes), I think it's an issue that will be addressed by Lenovo later and for the time being, it doesn't hinder productivity unless your use of the company requires the image to stay stationary for an extended period of time.

Any GT80 Titan or GT72 owners WITH the i7-4980HQ, help me out

Hello. I'll be rather blunt. I want to test the 4980HQ CPU's overclocking, TDP limit, current limit, and voltage limit potentials.
The GT72 and GT80 Titan laptops are among the only ones on the market that've had enough love for someone to actually own one, and I've already had users test the 4710HQ and 4720HQ chips for me already.
Basically, the point is that the HQ line appears to be TERRIBLE at increasing TDP limits, Current limits and possibly even Voltage limits. The options are available to tune in intel XTU, however adjusting the sliders does absolutely nothing.
Can anyone with either of these machines reply here and basically be my guinea pig so I can put proper information in the mobile i7 CPU guide in my signature?
In general, I need you to run a couple stress tests/benches like Intel's stress test or Linpack or something. In general, I need to see you drawing above your short power turbo boost max of 57W and not dropping overclocked values on your CPU under load. Some examples I have are below; please use HWiNFO in "sensors only" mode to check for TDP and clock speed per core. I'll give two image examples below of my CPU having a maximum draw of well over the stock TDP (check the maximum column in HWiNFO for the Linpack bench as I don't run the screenshot program during its bench):
and
If you lose clock speeds or get otherwise limited, please let me know. It helps to set your minimum processor state in windows power settings to "100%". I believe using the default "high performance" plan does this automatically.
Sorry, I have no idea how to use spoiler tags to hide the images on this forum.

Thank you for visiting the HP Support Forum. This is a peer to peer
community for customers to connect and share solutions on their HP
consumer products. If you have direct feedback for HP about their
products or services, please use the link below.
http://welcome.hp.com/country/us/en/wwcontact_us.html
If you have other questions and concerns, please feel free to send me a private message
MrMatthew - HP Support Forums Moderator
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.

Need help with iphone 4s activation goes from hello to country to network and will not activate on network or itunes i am original owner with no obvious problems with phone any ideas

need any ideas on iphone trying to use again but now it goes from hello to country to network then tries to activate but on wifi and itunes both say sever unavailable any ideas?

That message usually means that your phone was once connected to a different phone carrier than the one you're currently on.
Then when you restore or updated the phone it locked back to the original phone carrier - this is caused when the phone was hacked to unlock it from the original phone carrier.
Very rarely is the activation server unavailable.

DirecTv NFL Supercast with Adobe Air - Problem - HELP

I am attempting to download the DirecTv Supercast feature so I can watch NFL Sunday Ticket online. I am unable to get Supercast to work via Adobe Air. When I attempt to download Supercast, I get an error message (see first screen shot) that states, "The application could not be installed because the AIR file is damaged. Try obtaining a new AIR file from the application author." After I download Adobe Air from the Adobe website, it installs fine; however, if I attempt to install Supercast after installing Adobe Air I get an error message (see second screen shot) that states, "The application could not be installed. Try installing it again. If the problem persists, contact the application author. Error 2032." I have the latest Adobe flash player. I have already viewed DirecTV online FAQs and called customer service… neither have helped resolve the issue. I have uninstalled and reinstalled all software numerous times. I have also attempted the installs with all firewalls off. Nothing has worked. I get the same problem on 4 different computers (3 running Vista and 1 running XP). Anyone have any ideas what the problem might be? Thanks for the help.

hey my name is tom im in the army stationed out here in bulgaria and i have been having this same problem for 2 weeks now trying to watch the games,i downloaded and uninstalled adobe air hundreds of times, but directtv when i click there thing to install the supercast it dosnt work, i think it might be the isp aswell, would u please be able to send me the direct link or the direct file for supercast? or tell me a easy way to fix it, i dont know anything about vpn's so thats not going to work. id appreciate it if u could just send it to me thanks tom.burns421 at live dot com is a email please send it to there and put who its from in the subject so i know

Pls help me with this installation problem. Your advice is highly needed.

I am installing oracle 11.1.6.0 on windows xp professional everything was going fine untill there was a pop up that reads below
INFO: exit-tool: Launch browser
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 1
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat /orahome c:\app\doN H\home /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile c:\app\doN H\home\network\install\netca_typ.rsp
Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat has failed
Execution Error : 'c:\app\doN' is not recognized as an internal or external command,
operable program or batch file.
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to c:\app\doN H\home
Configuration directory is set to c:\app\doN H\home\cfgtoollogs. All xml files under the directory will be processed
INFO: The "c:\app\doN H\home\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is C:\app\doN H\home\oui\bin\runConfig.bat ORACLE_HOME=C:\app\doN H\home MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home C:\app\doN H\home we use the runConfig Command instead of the plugin's command
INFO: Created a new file C:\app\doN H\home\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\app\doN H\home\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\app\doN H\home\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat /orahome c:\app\doN H\home /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile c:\app\doN H\home\network\install\netca_typ.rsp
Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat has failed
Execution Error : 'c:\app\doN' is not recognized as an internal or external command,
operable program or batch file.
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to c:\app\doN H\home
Configuration directory is set to c:\app\doN H\home\cfgtoollogs. All xml files under the directory will be processed
INFO: The "c:\app\doN H\home\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is C:\app\doN H\home\oui\bin\runConfig.bat ORACLE_HOME=C:\app\doN H\home MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home C:\app\doN H\home we use the runConfig Command instead of the plugin's command
INFO: Since the option is to overwrite the existing C:\app\doN H\home\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\app\doN H\home\cfgtoollogs\configToolFailedCommands.bak.1
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: No
1...The Netmgr and the ODCA was not properly configured and they are not opening on the windows enviroment.
2...The sqlplus, whenever called up, aooears and disappears in 1 second
3...I can not connet to the database. Says adapter error
4...Will 1 start the listner before i can connect and how?
Ur contribution is highly needed. TNX

I am installing oracle 11g on windows xp, everything installed suceessfully except the enterprise control. the error reads
Jan 14, 2011 5:32:30 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:32:40 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:32:51 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:01 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:11 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:21 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:31 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:41 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at G:\app\doN_H\cfgtoollogs\dbca\orcl1\emConfig.log for more details.
Jan 14, 2011 5:33:41 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:869)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:250)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:213)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:235)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
at java.lang.Thread.run(Thread.java:595)
Jan 14, 2011 5:33:41 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\app\doN_H\product\11.1.0\db_1\oui
It also told me that i can configure it later by running G:\app\doN_H\product\11.1.0\db_1\BIN\emca.script
Pls help me. I appreciate ur help so far.

OEM 12.1.0.3 installation problem

Hi,
I want to install OEM 12c Release 3 (12.1.0.3) on my virtual machine/box.
VM details:
Windows Server standard 2007 service pack 2
Memory(RAM) :5 GB
System Type : 64 bit.
HDD free space : 9 GB
Already 11g database is installed on this VM.
Earlier BI publisher was present on this VM, however uninstall it to get more free space.
I have downloaded OEM 12c Release 3 (12.1.0.3) from oracle using below url.
Oracle Enterprise Manager Downloads for Windows x86-64 (64-bit)</title><meta name="Title" content=&qu…
There are three zip files. I have extracted it in same folder and tried to run setup.exe present in em12103_winx64_disk1 folder, but when i run it from cmd prompt, it doesn't start installation. it shows popup and immediately gets disappears.
Please let me know if i am missing anything here.
-PM

Hi PM,
Most likely this is the problem with wrong download from OTN , either its not downloaded properly or not extracted properly.
a) can you make sure that all the zips are downloaded from OTN have correct byte and checksum information
b) Can you make sure that you unzipped all these zips files in a single folder
c) After unzipping can you check if you have following folders created ( not these folder are for linux but they will be same on windows) -
install libskgxn plugins response stage WT.zip
jdk oms runInstaller wls
after zip file extraction what is the dir structure you have, make sure that setup.exe is not under \tmp\em12103_win64_disk1\oms\Disk1\install" directory and its separately under /tmp
d) Can you invoke setup.exe -debug
then look at the logs from -
C:\Users\aime\AppData\LocalTemp\2\OraInstall2013-07-09_04-10-59AM ( for windows it will be orInstaller.err and log )

PHP disaster with entropy installation need help with file location

I have a mac mini snow leopard server running 10.6.5 ,and I was trying to resolve a mcrypt module issue so that I could install wordpress and magento on some of our sites.After doing what I thought was extensive research, I decided to download the entropy php 5.30-3pkg from Marc Liyanage since it was already compiled and had an automatic install.I had the xcode tools installed and was going to attempt to compile it myself,but did not quite understand the instructions on Michael Gracie's site.When I installed the entropy package it told me that i needed to first disable the existing module,and I attempted to uncheck the php5 module,with no luck,as every time I tried to save it it rechecked itself,which I later discovered was happening because of dependency issues, as I had the mail,wiki,etc services on the sites checked. So my problem is that I wasn't aware at the time of the dependency issue,and I just renamed the module and the file name by putting a # in front of both (Inside the server admin dialog box through the pop up window).I didn't think it would hurt since is was going to be disabled,but now i get blank pages when trying to connect,and can't even see a test.php file, nor can I even locate where they say:
software is supposed to be installed into a new directory /usr/local/php5 on my boot volume. If you ever want to get rid of the package, you only have to remove this directory and a symbolic link called +entropy-php.conf in either /etc/apache2/sites or /etc/apache2/other, depending on whether you run OS X Client or Server.
Any help would be appreciated !

Thank you so much, that works just like i wanted it to as it downloads the file but then i have the problem of the file being called firename.png (or whatever i put in there instead)
using this i changed the code and made it this instead which works 100%
set download to text returned of (display dialog "Enter IGN" default answer "" buttons {"Download", "Cancel"} default button 1)
set the destination to (choose folder)
do shell script "curl -L http://minecraft.net/skin/" & download & ".png" & " -o " & quoted form of ((POSIX path of the destination) & download & ".png")
so i used the input name again with download and added a .png for the extention and now it downloads the file to the locaiton i specify with the name of the user im entering with the correct exention, 100% awesome ^^
Thank you everyone who help me with that issue, grately appreshiated

Need help with drive installation for K9N2 SLI Platinum

Hi
I am new to the forum and to MSI
This is my 6th computer build and first time using SATA and PCIe
My hardware includes:
•   MSI K9N2 SLI Platinum Motherboard
•   Corsair XMS2 TWIN2X4096-6400C5
•   GeForce 9800 GT 512MB GDDR3
•   AMD Phenom X4 9850 Quad Core Processor, Black Edition 2.5GHz
4MB Cache 2000MHz [4000 MT/s] FSB
•   Thermaltake Ruby Orb Aluminum Core CPU Cooler
•   UltraX3 850 Watt ATX Modular Power Supply
•   [1] Western Digital 200MB7200 ATA133
•   [1] Maxtor 80MB ATA133 Drive [Not connected yet]
•   [1] Western Digital 500GB 7200RPM 16MB SATA II HARD DRIVE
•   [2] Seagate 7200.11 ST3500320AS 500GB SATA Hard Drives With 32 MB Cache
[Not connected]
•   LG DVD-RW
•   Toshiba DVD-ROM
•   AMI Bios
•   Antec Full Tower case
The board set up fine, but I can’t figure out how to install my drives. The MSI directions are the worse I’ve ever seen, or should I say non-existent. They don’t even describe the bios entries… I am familiar with the bios, but don’t know all the settings for the board. I set the time and date and had to rearrange my drive placement on the board to have my 2 DVD drives show up on the secondary IDE Channel instead of the primary IDE. The Western Digital 200MB7200 ATA133 is on the primary master IDE. I’m old fashioned so I still use FDISK to erase the old OS and partition the drive… I couldn’t see my SATA drive in FDISK even though I could see it in the bios. Now I want my Western Digital 500GB 7200RPM 16MB SATA II HARD DRIVE to be the system drive and the Western Digital 200MB7200 ATA133 to be a slave drive. My previous boards had raid but I just used them as additional slave drives.
My goals: I want to have redundancy for my personal audio/video and my work. I will use the 2 Seagate 7200.11 ST3500320AS 500GB SATA drives for that.
I also want 2 additional drives not purchased yet for my other data storage needs and for games
My questions are:
Can I use the SATA drive as the system drive if a drive is connected to the primary IDE?
How do I set up Raid on this board? I actually want to use its capabilities this time.
Does this board present any special problems with dual booting XP sp2 and Vista 64bit.
If I put another set of Corsair XMS2 TWIN2X4096-6400C5 in anticipation of installing Vista 64bit will this cause a problem other than windows XP not seeing the additional memory.
Is there additional documentation for this board somewhere?
Please help…I have been working on this thing for 4 days straight. My last build took 2 hours not including software installation. Hope I stated everything you need to know. Thanks in advance

Hello!
Advice no. 1 will be not to have everything connected at once. Have the chosen SATA and one of the DVD:s connected and install Windows. (Windows can only boot from bootable devices. It "jumps" all un-bootable.) Once you have a successful boot and happy with it, remove other things from the boot-sequence.
Eh, some of your questions suggest you don't have the full manual, but a multi-lingual one. Check this out, bottom of the list:
http://global.msi.com.tw/index.php?func=downloadfile&dno=6745&type=manual

MSI K8N Neo Platinum with Vapochill Case problems - Help anyone. :)

Hi all,
Had a bit of a tricky problem and as Im new to this board I have no idea what could be causing this.
First all all system specs:
Athlon 64 3700+ Clawhammer
MSI K8N Neo Platinum -
1 gig Corsair XMS ProL Low Latency Ram (2 x 512mb)
Nvidia Gefore 6600GT
1 x WD Raptor 10000rpm HD
NEC 2500a DVD writer.
Eye-T 550w PSU.
Vapochill SE Case with installed Vapochill Phase change cooling.
Here are photos of it in its present state, you will notice that it isnt installed in the case at the moment.
The reason for that is because the two wont work together and I want them to so so bad...
So, hopefully someone here can save the day for me - here goes.
I have tested the Motherboard and all other componants outside of the case and everything runs smoothly and there are no problems what so ever, great.
I have also retested the Vapochill case with another motherboard and that also works without a hitch.
The problem comes when I insall the MSI board into the system, all hooked with a really basic setup, PSU, Case cooling, CPU and Ram. Flick the on switch on the power suply and the system turns on for around 1/2 a second then turns off again. I found this strange because it soundnt come on at all until I press the power button.
If I press the power button the same thing will happen over and over.
I have tried a different powersupply and this does nothing at all.
I have checked for shorts and there is no possible way it is shorting on anything.
I have a fan plugged in where the CPU fan would go and this doesnt help.
I have taken it back out and tested it again and it still works ok.
Does this sound familiar to anyone? Are there any secret Bio's menu's that would have an option that would solve this?
Any help would be greatly appreciated.
Glenn

When you are running the MoBo standalone, what are you connecting to the Power, Reset, HDD, etc. pins ? Are you using the wires from the Vapochill case, or something else ? It looks like a single cable with an intermittent switch (red/white cable). I once had a similar sort of problem and it was because I hadn't connected up (the incredibly fiddly) cables correctly. Other than that, I would have gone for a short of some sort - but you have checked that already, so . . . .
As to the system starting to power-up when you switch on the PSU, I wouldn't worry too much about this. It seems to happen from time to time with some of my systems - amongst other things, the BIOS can be set to resume to previous state after a power-fail.

9171 driver installation problem with LV 8.5.1 and NIDAQ9.3

Hello,
I just bought an NI9171 chassis with a NI9477 DO board after checking the compatibility (driver, LV version). Everything seems to be ok, but I can't manage to get the right driver installed within NIDAQ 9.3. I tried it with NIDAQ 9.4. Here the driver was installed properly and I could do some tests in MAX, but my DAQmx LabVIEW library was completely deleted during the installation of 9.4...Re-intsllation of NIDAQ9.3 brought back the DAQmx library, but the driver is not working anymore. One thought is to copy the library somewhere else and install 9.4 again....but in case this would work, it should not be the correct way to solve the problem. Could anyone tell me, if there is something wrong with the 9.3 readme or suggest a solution for that problem? Unfortunatly I have no SSP anymore and can't get direct support by NI ;-(
Here you can find the readme:
http://download.ni.com/support/softlib//multifunction_daq/nidaqmx/9.3.0/readme.html#OS
Thanks for any hint!
Olli
Solved!
Go to Solution.

Hi Olli,
Sorry for the inconvenience, however DAQmx 9.3 does not support 9171. This is error in our documentation. It was first supported in 9.4. However I do have a workaround for you. It involves installing DAQmx 9.4/9.5's core components with DAQmx 9.3 LabVIEW support:
1) Uninstall all versions of DAQmx
2) Install DAQmx 9.3 Full and reboot
3) Run the DAQmx 9.4/9.5 installer
a. Select Custom then click Next
b. For "Application Development Support" select "Do not install this feature"
c. Click through the next few menus until you get to "Start Installation." Make sure that Application Development Support is NOT under the Upgrading section
d. Continue the install as normal and reboot.
5) The DAQmx palette should be in LabVIEW 8.5.1
Please let me know if you have any question. Again I apologize for the error.
Steven K.
National Instruments
DAQ Software Engineer

Need help with an installation problem on XP.

I try to install iTunes and it comes up with this message... An error occurred during the installation of assembly 'Microsoft.VC80.CRT, version="8.0.80727.4053" type="win32," public key token="1fc8b3b9a1e18e3b" process or architecture="x86" please refer to help and support for more info. HRESULT:0x8007054F.
WHAT DO I DO?

Hi RyTemple,
If you are having issues installing iTunes on your Windows Machine, you may find the following article useful:
Apple Support: Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Cheers,
- Brenden

How do I get Adobe to help with an installation problem?

I removed Windows Vista, and installed XP instead. Then tried to install CS3 using the file I downloaded from Adobe 2 years ago. It installed Acrobat, but the other components (InDesign, Photoshop, Illustrator) failed with “Component not installed.” No error message. Never even asked for my serial number.
Phoned Adobe support on Sunday: closed.
Phoned again on Monday. Told to run CSClean. Did not solve problem. Phoned back. Swapped around departments (2 hours total on hold.) Promised they would email a link to download the installation file again. No email sent.
Phoned again Tuesday. More hours on hold. More promised link. Never sent.
Phoned again Wednesday. More hours on hold. Finally given a zip file link. Downloaded it 3 times, using different software (browser, FTP client.) I received the exact number of bytes on Adobe’s server, but the file is “not a valid archive” — rejected both by Windows itself and by WinZip.
We’ve now lost 3 days work, and cancelled clients for Thurs as well.
Utterly frustrated! WHAT DO I HAVE TO DO TO GET ADOBE TO HELP???

Please post your tale of woe here:
http://forums.adobe.com/community/general/adobedotcom_feedback
Adobe personell monitor this forum. You might post your casenumber. Hopefully, someone will arrange TS to call you back or provide some other avenue for help.

Live! SB022x (or any OEM model) owners with driver installation problems ... [Help 'maybe' he

Similar Messages

Maybe you are looking for