Live sites with Discoverer Viewer

Is there a list of sites available in the Internet with Discoverer Viewer working ? I would like to see some real live experiences with Viewer.
thanks,

Hi Simon
That's really cool, although it is Discoverer 9.0.4, not 10.1.2.
For anyone who is interested, Oracle made a lot of changes between the 9.0.4 Viewer and the 10.1.2 Viewer, not least being the ability to send a report via email, to save a report, to pivot the data and to handle fine grained printing using PDF. You can also set up a corporate look and feel for 10.1.2 Viewer using the OEM interface.
With regards to the take up of Discoverer Viewer, most companies I work with are using it in a ratio of between 70:30 and 90:10 Viewer versus Plus.
Its a great tool for doing exactly what it says - viewing a report.
Best wishes
Michael

Similar Messages

  • Workbook with Discoverer Viewer in Apps 11i?

    With the help of (Doc ID: 278095.1) I was able to link Discoverer workbooks in Apps 11i. But all of my workbooks open with Discoverer Plus.
    How do I open some of the workbook with Discoverer Viewer in Apps 11i?
    I can open all my workbook directly with Discoverer Viewer without Apps 11i config.
    Current Function Settings (in 11i) are:
    Type: SSWA plsql function
    HTML Call: OracleOASIS.RunDiscoverer
    Thanks in advance for your help,

    Hi,
    Your workbooks are openned with viewer or plus depending on the profile 'ICX: Discoverer use Viewer'. You can override this by setting the viewer parameter on the call to OracleOASIS.RunDiscover. In the config of the Apps function that call OracleOASIS.RunDiscover, on the form tab add &VIEWER=Y or &VIEWER=N onto the end of the parameters. e.g workbook=myworkbook&parameters=param1~value1&viewer=Y
    Hope that helps,
    Rod West

  • Offline working with Discoverer Viewer 3i

    I work with Discoverer 3i and I have a problem.
    I can't save my pages (with Discoverer Viewer) in order to see
    them offline.
    Can you give me any solution???
    Thanks

    Hi Simon
    That's really cool, although it is Discoverer 9.0.4, not 10.1.2.
    For anyone who is interested, Oracle made a lot of changes between the 9.0.4 Viewer and the 10.1.2 Viewer, not least being the ability to send a report via email, to save a report, to pivot the data and to handle fine grained printing using PDF. You can also set up a corporate look and feel for 10.1.2 Viewer using the OEM interface.
    With regards to the take up of Discoverer Viewer, most companies I work with are using it in a ratio of between 70:30 and 90:10 Viewer versus Plus.
    Its a great tool for doing exactly what it says - viewing a report.
    Best wishes
    Michael

  • Drill error with discoverer Viewer

    Hi,
    i'm not able to drill up and down with discoverer viewer.
    I've the following error when i click on icon : Object doesn't support this property or method
    I've read some notes on metalink and maybe a patch is applicable to fix my problem. But i'm lost.. i don't have any experience with oas administration !
    Spécifications :
    Browser ie 7.0 with OracleBI Discoverer 10g (10.1.2.2)
    Hope my explication are clear !!
    thx in advance for help..
    Jeff
    Edited by: [email protected] on 2009-09-18 09:49

    Jeff,
    To get the fix you have to: Bug number -5673463
    (a) Apply the 10.1.2.2 patch - you can get this on Metalink (4960210). It is a big patch (over 1 and half GB in size) and will upgrade your app server.
    (b) Then apply the IE7 patch from Metalink (5758865).
    Hope this will help

  • Problems with Discoverer Viewer and the printable page

    Hi,
    I have a problem in Discoverer Viewer. I run a workbook, see the results and I click on "Printable Page". I set the page setup options to "Portait" and "100% scale". I preview the workbook in a PDF file and it's ok, I see the results in "Portait" and "100%".
    I close the PDF file and I click again on the "Printable Page". This time, I set the workbook to "Landscape" and "20% scale". I preview the workbook in a PDF file and it's NOT ok, the results are still in "Portait" and "100%". And the date/time in the workbook is the time when I run the workbook the first time. So, it's seems like a browser cache problem. The problem repeats until I clear the brower cache. At that moment, the workbook will take the page setup that I set at this time. However, it will be the same workbook with the same results until I clear the cache once again.
    If I save the PDF file on my Windows Desktop and I overwrite it each time, it's ok.
    Can somebody help me on this??
    Thank you!
    Mathieu

    Hi Michael,
    I'm clearing the browser cache by going in Tools -> Internet Options. In the "General" tab, I click on the "Delete files..." in the "Temporary Internet Files" section" (middle of the window).
    But I don't indicate that Discoverer is saving my printable page changes. I say that the first time I run a workbook, Discoverer saves it (the results) in the "Temporary Internet Files" folder in a PDF file. Each time I run the same workbook after that, Discoverer don't overwrite the file in the "Temporary Internet Files" folder. He takes the PDF file that is already there and show it to me. So, the results are the same even if the data has changed. It does this until I clear the browser cache (it deletes the PDF file in the "Temporary Internet Files" folder).
    Do you understand?
    Regards,
    Mathieu

  • Strane Issue with Discoverer Viewer

    Hi All
    I Created a report in doscoverer plus (OracleBI Discoverer 10g (10.1.2.2)). I have a page item LOCATION and in the drop down box i have four locations LOCATION 1,LOCATION 2,LOCATION 3,LOCATION 4. In discoverer plus the page items are working just fine, whenever i select a location from the page item it gives me the report based on my selection. The problem is when i look at the report in Discoverer Viewer and try to select a different location (other than the default which is LOCATION 1), for some reason it doessn't select a different location but just shows the default. Once i logout and log back in into the viewer it works fine again. Can anyone please tell me whats causing this?
    Thanks

    What browser are you using and have you tried a different browser?

  • Live site with mobile site under construction

    I have developed a desktop site which has been uploaded to a local server and is now live. I am now working on the smartphone version of the site which may take a few weeks to complete. I notice that once the mobile version is opened in the Muse file, any uploaded changes of the desktop site on the server include a manifest file that reflects the existence of a mobile version and automatically redirect any visits from smart phones to that version, even though it is unfinished. This is not what I want to do until the mobile version is completed.
    Is there a preferred way that allows work on one version of a site while another version is already live? Is it as simple as making a copy of the Muse file under a different name and then renaming and uploading the entire site from that copy of the Muse file when it is finished?

    The other option is you can create a Homepage for Mobile which can say "Mobile site under construction" create a link there to go to Desktop site.
    While creating the link, make sure you link it to the Desktop Homepage. And in plan view of Mobile site, make sure you uncheck the "Export Page" option of all the pages so that when you Publish/Upload the site, the other mobile pages are not uploaded.
    Regards,
    Sachin

  • Help with discoverer viewer tables

    Hi
    I have a oracle table which has some blank cells which oracle discoverer shows as null, thats fine although i wish it wouldn't show but i can live with that, the problem is can i exclude the null count when calculating percentages ?
    thanks
    nimesh

    Hi
    You can change how the NULL shows up in your sheets, if you go into Tools, Options, Sheet and at the bottom there is an option Show Null values as.....
    Or on an existing report right click on the table and choose Format Table (or Crosstab) and set the NULL value option in there....
    Can you give us more info on what you mean by excluding nulls from a count....because if it's what i think it is then you can do a case statement.....
    MF

  • HTTP 500 - Internal Server Error from Discoverer Viewer to Portal

    HI,
    I created a tab with a list of workbooks created with Discoverer Viewer and published with Discoverer Portliest Provider (List of Database Workbooks). Another tab contains four Discoverer Worksheets created with the same account. Everything works well but if i click on a report in list and open Discoverer Viewer, when i return to portal and go to tab containing worksheets i see message "HTTP 500 - Internal Server Error" and i'm not able to do anything. I only can close my browser and i must reconnect to portal!
    Can you help me?
    My portal version is cg (9.0.4), i'm using Windows 2000 ESP and Internet Explorer 6.
    I tried with Olin and Mazola but result did not change.
    I used a public connection bud i tried a private connection too. Nothing happened.

    The application.log file, under the OC4J which running your Discoverer provider, should give you some hints about the problem you're facing.
    Peter

  • Discoverer Viewer Issue - IE7 - Parameter Popup Fails (Oracle JS issue?)

    OracleBI Discoverer Version 10.1.2.55.26
    I have created a report that has several parameters, each of which can be entered directly or by clicking a button to bring up a parameter selection popup. Each parameter popup displays an associated LOV.
    This works great in Discoverer Plus. It also works well in the HTML-based Discoverer Viewer using IE6. It does not, however, work in IE7.
    What happens:
    When using IE7 with Discoverer Viewer, I access a report with parameters and then click on the "flashlight" icon to the right of a parameter field to bring up the parameter popup. IE7 then:
    - Changes the cursor to an hourglass
    - Displays the following in the status bar: "Done, but with errors on page."
    - Stops doing anything else, leaving the cursor as an hourglass
    - Popup never shows up
    I assume that the cursor is stuck as an hourglass since the flashlight button must have a JavaScript "onClick" handler that executes a function to change the cursor prior to opening the new child window with the parameter LOV...and the cursor gets stuck when the JavaScript routine encounters an error. The cursor isn't my issue, but it is also annoying since my users will assume that the browser is doing something...and it is not.
    Regardless, if you click the status bar message, it displays the following JavaScript error:
    Line: 3609
    Char: 1
    Error: Object doesn't support this property or method
    Code: 0
    Oddly enough, if you then ignore the situation and click the "Go" button to run the report (using the cursor stuck as an hourglass), the report runs and as soon as it completes, the popup for the parameter THEN appears.
    As I said, the issue is with IE7 only. It works fine in IE6...and I don't have the popup blocker enabled in IE7.
    Any ideas? Thanks!
    Steve

    Hi
    Yes' you're right, the compatibility is for IE8 to IE7 and it does work very well - which I know is a red herring.
    I'll keep looking through my notes.
    From all of my notes, IE7 is supposed to work just fine with 10.1.2.3 (your version). I've been using IE7 for quote some time and I've never seen a JS error coming up in Viewer - Plus yes and many times.
    Some things I would try at this stage are:
    1. Delete your Java cache
    2. Make sure no popups are blocked
    3. Make sure cookies are enabled
    4. Try Mozilla and see if you get the same issue - will indicate if a machine issue or browser issue
    Best wishes
    Michael
    Edited by: [email protected] on Sep 13, 2010 3:54 PM

  • AS 10g 904 Discoverer Viewer and remote db EUL

    I have installed Oracle AS 10g (9.0.4) with Discoverer Viewer on a RH AS3 box. I need an EUL setup on remote db (9.2.0.5). Do I have to have Discoverer Windows Admin tool or should I be able to setup an EUL from scratch with the java command line? I am getting core dumps trying to do create_eul using the java command line method. The log file is complaining about no default eul or specified schema tables available. Any help much appreciated.

    Add the host name to your etc/hosts file. If you are on windows it would be under c:\WINDOWS\system32\drivers\etc\hosts. Try adding that entry to ur hosts file along with the actual ip address. That should make it work.
    Thanks,
    Venkat
    http://oraclebizint.wordpress.com

  • Discoverer Viewer/Plus 10g after a migration from Discoverer 4i

    Hi, I upgrated Discoverer4i to Discoverer 10g with Ebusiness Suite 11i ( 11.5.9) without installin AS 10g
    I followed the note: http://oracle-magic.blogspot.com/2006/11/upgrading-discoverer-4i-to-10g-on-apps.html
    If I use Discoverer Administrator and Desktop it works perfectly (I connect as an Oracle Application User)
    Now, I want to see my reports with Discoverer Viewer/Plus but I don't understand how to do it (always connecting with an Oracle Application user).
    My previous URL (with Discoverer4i) was: http://gnvdev.ote.gr:8025/discoverer4i/viewer
    Now, after the Discoverer 10g installation I can connect to the "Welcome to Oracle Business Intelligence 10g (10.1.2)" page with the following URL:http://gnvdev.ote.gr:7779/
    I didn't understand how Ebusiness Suite 11i ( 11.5.9) can communicate with Discoverer 10g in order to see reports from the web
    Can anyone help to understand where and how I should modify anything in order to see my reports with Discoverer Viewer or Plus
    Thank you
    Alex

    If you have followed all the steps in "Note: 313418.1 - Using Discoverer 10.1.2 with Oracle E-Business Suite 11i" then you should be able to access Discoverer Plus/Viewer through the following links:
    Discoverer Plus:
    http://gnvdev.ote.gr:7779//discoverer/plus
    Discoverer Viewer:
    http://gnvdev.ote.gr:7779//discoverer/viewer
    The above links will prompt for some input, all what you need to provide is:
    - Applications Username
    - Applications Password
    - Database (SID)

  • Serious issue in discoverer viewer

    Dear all,
    I have serious issue with discoverer viewer 9.0.2.53 version.
    I am in need of displaying lengthy worksheet in discoverer viewer,i am using crosstab format.
    my client wants to compare the datapoint value of worksheet with leftside drillup/down and top drill up/down values.
    I want the assumption of "display similar to desktop display of worksheet"..is it possible to have same type of format or alternative one by customizing viewer?
    Plz help me out of this..if viewer does not support this issue i think..its not best suited for report making..
    plz somebody confirm about this issue..its very urgent to proceed further...
    regards
    chandra

    Already checked that. I don't think the problem is color profile related.
    Besides, when I reset the viewer as described above the colors look perfectly fine.

  • Discoverer Viewer and UTF8

    Dear friends
    I have problem with Discoverer Viewer - version 9.0.2.39.02 and UTF8.My infra has a UTF8 and my App server is too, but when i run a query on Discoverer Viewer (web) i see the header of table with WE8MSWIN1252 then it's not readable!!! How can i change this nls_lang to UTF8 or how can i solve this problem.
    thanks alot.

    Hi,
    Were you able to find the solution to this problem? I have installed 9ias successfully. I could log to OEM and created a public connection but I cannot go to
    http://hostname.domain:7779/discoverer/viewer
    I get an error "Internal Server Error".
    Any help is welcome
    Vani

  • No CR rendered with 3i viewer

    Carriage Returns CR are entered into a pl/sql generated web page field. When the field (long) is viewed with discoverer viewer 3i, the CRs are ignored and all lines of the text are run together.
    What is the work around?
    Please Email me direct
    [email protected]

    There is no workaround at this point. If you put in a <br> in the data it'll show up as <br> in the HTML page, not as a carriage return. A bug has been logged.
    Regards,
    Discoverer Development Team
    htttp://technet.oracle.com

Maybe you are looking for

  • New bug in DVD SP 4.1.1

    After updating to ver. 4.1.1 subtitle files such as .STL, .SON, and .SCR are no longer imported on Intel Macs. Power PC machines are unaffected. Apple, wake up! This is unacceptable, especially after 4.1 static menus and DDP formatting debacle.

  • Xserve G4 Dual 1.3GHz PCI Options?

    I just picked up a Dual 1.3GHz G4 Xserve. I was wondering what my PCI options are. I was looking for what exact video cards work. So far I have only came up with the ATI8500 I believe. Is there any SATA cards that work to add external storage? Any in

  • Best way to set up 'sample songs' using iWeb?

    Just upgraded to '09. I remember having to write extra code to get iWeb to open separate music files. How's iWeb '09? What would be the easiest\most efficient way to set up a sample song list - click on title to have the sample clip open and play? Do

  • My youtube is acting weird for no reason

    on my ipod, i have youtube that it originally came with. i have updated my ipod before, but the original youtube on the ipod never went away. so i still have it. this morning i went on youtube and all my favorites were there and everything was workin

  • Time Machine error message "Unable to complete backup....."

    I just purchased Time Capsule and attempted to do my initial backup. I had to stop during the middle of the process. When I returned to resume the backup I get the following error message: "Unable to create backup. An error occurred creating the back