Live streaming in lion 10.7.2 and safari 5.1.1

yh, ok so i have lion 10.7.2, the latest of safari and a very good internet connection, my live streaming is not that encouraging, there must be a plug-in or something to enhance it ryt? can anyone share an advice on that please? thanks

So far the only solution I have been able to find has been launching the recovery partition and running disk repair. That will fix the problem until you trigger it again. Fortunately, or unfortunately, I have pinpointed what triggers it on my computer.
Seems to be a flaw in keychain access. When Safari's connection times out due to an expired certificate (common in university networks that require a log in every few hours), the security settings freak out and effectively shut down safari's ability to do anything. The fact that it attacks KeyChain access and iPhoto and more is just a really big system wide glitch. Here's the run down:
http://digit.algravitas.com/2011/10/major-networking-glitch-found-in-os-x-v10-7- 2/

Similar Messages

MacBook Air 2011, running Lion 10.7.2, and Safari won't load any pages. Firefox loads everything just fine. What's going on?

I have a MacBook Air 2011, running Lion 10.7.2, and Safari won't load any pages. Firefox loads everything just fine. What's going on?

d Pacifist to reinstall both the Safari
application and the WebKit framework
was that before the 10.4.6 combo was applied?
Nope, I tried the Pacifist route after applying the combo update.
It does sound as if webkit is busted at the moment.
What version of osx is on your install disks?
Not sure, I'll have to check them.
I'd like to avoid a archive & install, but I'm beginning to think it's my only remaining option.

User Auth. for Live Streaming with Media Encoder 2.5 and FMSS

Hi,
i am currently thinking of buying the Flash Media STREAMING
Server (~995 $) and in order to see if this is the right choice, i
also take a look at the Wowza Media Server for comparison.
I want to support Live Streaming from Events with Flash Media
Encoder 2.5 and for this i'll need a user authentification for
giving access to special publishing Users only. Wowza Media Server
supports a User Authentification by parsing the connecting URL,
witch is delivered by the Media Encoder on starting a Connection,
and therefor grants or denies access to the publishing function.
Only Users with the right Access Persmissions, which is written
trough a password and the onPublish Comand in the url, can publish
Live Streams. Everyone can watch the Live Stream, if no restriction
to the onConnect Command was made.
The Problem in this case is, i will need seperate Application
folders for every user who should be able to start a live stream.
This would be a horrible effort...
more info ==>
http://www.wowzamedia.com/forums/showthread.php?t=1281
Is there a similar way to support authorisation for starting
publishing a LiveStream to the Flash Media Streaming Server, or do
i need the Flash Media Interactive Server?
How can i restrict access to users, who should not be able to
start a live stream on my FMSS?
Thx for your help,
Tobi

quote:
Is there a similar way to support authorisation for starting
publishing a LiveStream to the Flash Media Streaming Server, or do
i need the Flash Media Interactive Server?
Unfortunately no, there isn't. I struggled with same issue
earlier, and we were forced to purcahse the Interactive edition. As
the 'Streaming' version only runs Adobe-signed apps, there is no
way to change things that happen within the onConnect handler.
Furthermore, guys at Adobe haven't provided any possibility for
even simple access control through configuration files for built-in
apps that come along with the Streaming Server edition.
- Jakki

Live stream - How To Detect connection success AND video stream receiving?

Hi,
I'd like to know how to catch the Event when the NetConnection has successfully connected,
And after being connected, but nostream is published to the server yet.
I'd to catch the Event in OSMF Player, when a real video stream has started to be pusblished to server, and of course is received in the player.
Because i dont find the Event making a difference between connection and stream receiving.
Thanks.
Seb

you should watch for a NetStream.Connect.Closed NetStatusEvent being sent to the NetConnection object, where the event.info.stream object is the NetStream in question.

Sarafi won't start up. Hard drive crashed, reinstalled Lion from Safe Mode. and Safari still won'topen. I get an error message. There are no files in the extensions folder.

How do I clear the error in Safari? I've reinstalled Lion 3 times and the error won't clear.

Well Apple Suupport is still tops in every book.
The fix for my problem was so ridiculously simple, I can't beleived it worked.
But somehow the mouse install disk (stuck in the drive) was disrupting the start up. I was instructed to take the batteries out of the wireless mouse.
IT WORKED.
Not sure if anyone that's had this similar problem is using wireless devices, but take the batteries out of them, use plug in devices to work around the problem, eject the CD and if you luck out like I did, it'll work
Thanks Apple my faith is renewed

Problem of republishing remote rtmp live stream with AMF

Hi, Guys
I am trying recieving one live stream from a remote rtmp server and republishing this stream in AMF.
a remote rtmp (rtmp://192.168.1.100/live/remotestream)
AMF instance(codes in application/app/main.asc) recieve and republish to another AMF instance.
I can watch with url(rtmp://192.168.1.100/live/remotestream ) in a player (ex. OSMF player).
But,no data from remote rtmp streaming can be recieved in AMF.
Here is the log:
NetConnection.Connect.Success
Sending error message: Method not found (onBWDone).
mystream.onStatus: NetStream.Publish.Start
mystream.onStatus: NetStream.Play.Reset
My codes in application/app/main.asc
application.onAppStart = function()
          mystream = Stream.get("myvideo");
          myRemoteConn = new NetConnection();
          myRemoteConn.connect("rtmp://192.168.1.100/live");
          myRemoteConn.onStatus =function(info){
           trace(info.code);
           if(info.code == "NetConnection.Connect.Success"){
                mystream.play("remotestream", -1, -1, true, myRemoteConn);
                //mystream.play("sample", 0, -1, true);<-----if play a local flv video file ,it works.republish fine.
          nc = new NetConnection();
          nc.connect("rtmp://localhost/demo");
          ns = new NetStream(nc);
          ns.setBufferTime(2);
    mystream.onStatus = function(sinfo)
        trace("mystream.onStatus: "+sinfo.code);
        if(sinfo.code == "NetStream.Publish.Start")
                              attach_retVal = ns.attach(mystream);
            if(attach_retVal==true){
                    ns.publish(mystream.name,"live");

On the Macintosh side there is the Camtwist app which allows you to do this and it works smoothly with FMLE. On the PC side I´m not sure but there just got to be more apps capable of this than on the mac side.

Re-Start a Live Stream using AMS 5 through Cloudfront

We have AMS 5 running on an Amazon EC2 instance. We send a Live Stream from an FMLE encoder using H.264/AAC.
If we do an Origin Pull from that instance running the AMS 5 and Live steam through one of our commercial CDN accounts, we can stop and re-start our Live stream without issue. It stops and re-starts as it should. When we re-connect to the AMS using FMLE, using the Origin Pull, the stream re-starts in either the OSMF or JW Player 6 in under 30 seconds.
If we use that same AMS 5 on the same EC2 instance and Live stream through an Amazon Cloudfront distribution, if we stop our Live stream, when we re-start the stream it takes an unacceptably long time for the stream to refresh - if ever. Basically, after the re-start of the Live stream through FMLE, the Live stream at the player plays the first 10 or 15 seconds of the intial Live stream and then stops. If you refresh the player, it will play that same 10 or 15 seconds again - and stop again.
It would seem that the AMS 5 is setup correctly. It works through our commercial CDN.
It also would seem that the issue is with the cache on Amazon Cloudfront. Our assumption is that the Cloudfront cache is not properly updating. But we have tried about every variable in every setting for Cloudfront that we can find. We can't get past this.
Any suggestions?
Thanks
As a followup to this discussion, you can follow the issue through the AWS.Amazon forums at https://forums.aws.amazon.com/thread.jspa?threadID=120448&tstart=0

We also have other threads going.
http://forums.adobe.com/thread/1180721?tstart=0
https://forums.aws.amazon.com/thread.jspa?threadID=120448&tstart=0
There appears to be 2 different issues - one issue with Amazon Cloudfront and a second issue with Adobe Media Server. Unfortunately, they are tied together in the real world application of these programs.
In AMS. when we use the adbe-record-mode=record, then the AMS works fine because the AMS is clearing the streams on each re-publish. Unfortunately, this causes a status code error on Amazon Cloudfront. And that particular status code error from a custom origin server causes Cloudfront to "override the minimum TTL settings for applicable cache settings". As the programmers explained, basically what happens is that Cloudfront overrides our 30 second cache settings and goes into a standard cache setting of 5 minutes. And waiting 5 minutes to re-start a Live stream just doesn't work in the real world for real customers.
We can fix that Cloudfront status code error issue by using adbe-record-mode=append on the AMS. If we use that AMS setting, then we can stop a Live stream, re-start the stream, the Cloudfront cache clears and everything works - unless you also change the stream settings in your FMLE. If you stop the stream and change the video input or output size in the FMLE, then the AMS server gets stuck and can't/won't append to the f4f record file.
Does anyone have any ideas about how we can adjust all of this so that it works together?
Thanks

Does Flash lite support live stream?

I use Flash CS4 and AS3 to build a flash client side live stream swf.
It can publish and play live video and encode by flash.
Can Flash lite support it?
If so, can mobile browser play flash swf?

Yes flash lite 3.0 / 3.1 support rtmp streaming. you can check your device for more info on rtmp support. Here s a project about what you want:
http://flashvisions.com/flashlite/spylite-open-source-flash-lite-security-application/
streaming from camera to flash lite device with rtmp.

Live streaming audio on flash site

Hello,
I am new to Flash and I am working on a web page using flash, the page itself is going to be pretty basic, but the situation I am in is this, we would like to but a live streaming audio feed on the site and I am having trouble figuring out how to add that. The server it is from is a Broadwave server, and it does stream in MP3. I would like the audio stream to start automatically when the web page is open. Any help would be greatly appriciated.

You could build your own player but if you are new to Flash, you might want to just embed or place on the Web page a prebuilt player. For example:
http://www.longtailvideo.com/players/jw-flv-player/
or
http://flowplayer.org/
or
http://ffmp3.sourceforge.net/
each player will have it's own config setup for autoplay etc.
Best wishes,
Adninjastrator

Advice on Snaphots of live streams

I've got a streaming video/audio app(CHAT). and everything is
working nicely. I'm going to add a snapshot function to it and i'd
love some pointers. There will be approx 100users, each user will
have the options of taking snapshots either single shots or a few
automated ones...I'm using FMS2
1. Are there any know issues recording parts of a live stream
while it's streaming?
2. Should I use the same NC and record the FLV file/ CHAT
instance then do a FLV -> FFMPEG -> jpg?
3. Should I make a new NC (and stop the live stream) to a
different app(snapshot) and do the FLV->jpg there
And if you have any other good advice please let me know
BR
/A

Well i kind of figured it out : Using a setinterval on the
serverside and instanciating a Stream from the server then playing
the live stream and then recording 1-2s flv files to be converted
by the FFMPEG.
/A

When i visit sites with live streams sites (justin ustream) browser freezes

Hi
I got a huge problem everytime i visit a site like justin.tv veetle ustream freedocast or only a site with a live stream in it my browser freezes and i ned to close it it stops to react sometimes i hear a sound on justin but the picture of the stream is frozen and my browser does not react back
when i watch livestreams on popout it works thats weird
i think it all started after i deinstalled msn but i m not sure about that pls someone help me i tried on ie or firefox browser both same problem
i use windows vista 32 bit version on an asus laptop

Try to create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
You can also try to reset Firefox:
*https://support.mozilla.org/kb/Basic+Troubleshooting

Live Stream only spools, never connects.

Up until several weeks ago, I was able to watch Live Stream. Now, it only 'spools' and never connects. The chat message box says 'disconnected.' Firefox is my browser.

I know this is a problem with JWPlayer which is very widely used. When videos get converted to Mpeg4 (h.264) flash, the time information is often at the end of the video. This causes the player to try to buffer the entire video before it starts playing.
Interestingly, Quicktime Pro 7 and Final Cut Pro put the time information where it belongs, but most of the other tools to convert do not. I spent weeks trying to solve this problem for videos on my site www.dfdtv.com . The solution was right in front of me all the time, QT Pro.
You can find out for sure by just starting the video in question and just waiting for a long time. If it is the time atom problem, it will eventually start to play.
All of our videos' are now h.264 and if created with QT Pro they stream great using JWplayer/Firefox (and underneath it all Adobe Flash).

Live streaming with multiple remote cameras?

look up lts security, i found it as a easy, high quality, low cost, and great solution

I didn't see any discussions on SpiceWorks that covered this question. I'm involved in live streaming of my church's services, and we got hit by lightening 2 weeks ago. We had 3 cameras which were able to be remotely controlled by 1 Telemetrics box, and which sent video feed into a digital video mixer. Well, one of the cameras and the remote control box have died, so we are looking to replace the setup with better equipment. I'm able to run the equipment, and even troubleshoot it to an extent, but have no idea what's even out there. Does anyone have any recommendations on a setup for at least 3 remotely controllable (pan/tilt/zoom) HD cameras? The remote control could be either hardware or software based. I have no idea how much the church could budget for a new system, so a range of low-high cost options would be ideal for me to...
This topic first appeared in the Spiceworks Community

Flash on Lion and Safari

I'm running Lion 10.7.1 and Safari 5.1. No matter how many times I install Flash Player, Safari won't recognize it and tells me I need to download the latest version. I'm reduced to watching videos on another browser. Any ideas?

I'm having the same problem on Snow Leopard 10.6.8, Safari 5.1.
Flash video seems to have stopped working in the last few days. Oddly, youtube plays, but many others don't.
It keeps telling me I need to update to a more recent Flash, and I have done, twice.

Ever since updating to Mountain Lion, I cannot watch live streams.

Hey, since updating to ML, something seems to be interrupting how Flash is working.
I am unable to see live video streams in the browser.
When I try to use VOKLE, for example, it seems to load fine and then I get an error from Vokle telling me to make sure I have an internet connection and allow RTMP traffic. Same story with Stickam, it connects but then shows me a blank screen.
I've tried:
Reinstalling Flash and messing with the settings (allow storage of data etc.).
Chrome and Safari
Disabling OS X Firewall & Sophos
Nothing seems to work, I haven't had this problem with Lion and I am pulling my hair out!
MSN messenger refuses to sign in also, this seems related to me maybe, it just tries for a long time then fails.
It seems like there is something blocking incoming connections BUT WHAT?
Thanks.

Same problem with Windows 7 using boot camp! O:

Live streaming in lion 10.7.2 and safari 5.1.1

Similar Messages

Maybe you are looking for