Live streaminng not working from Adobe 3.1 Encoder to iOS devices
We are trying to live stream from Adobe 3.1 encoder(on PC ) to live stream on IOS devices, by broadcasting the stream to Adobe Media Server 5 Professional.However though we succeeded in streaming live to PC, it is not working on IOS devices.Only when we uncheck the Audio option from Encoder, we are able to Live stream to IoS devices, which will be only the video without any audio.When we we have audio option checked as well, it works for PC, but for Iphones/Ipads it flickers once and then gives a error message " Cannot Decode".The current settings on encoder is as below
The current process is to use the default HDS links(as per the stream URL) for the PC, and the HLS links for IOS.Any guidance how to get the audio working here on IOS devices will be of great help.
Note:Online most of the places use AAC format for audio on encoder, is that the only one which can work for IOS devices?
Yes, AAC is the codec that iOS devices support
-Karishma
Similar Messages
-
Live Upgrade not working from Solaris 10 05/09 - 10/09
I have a Blade 1000 that used to run SXCE, and I used to LU all of the time. I recently rejumpstarted it back to Solaris 10 05/09 to match production.
Now that 10/09 is out, I went to do a normal LU, however it completely bombs out. I'm assuming it's because of the weird device name, yet I can't figure out what is causing it. Any ideas?
========
= Before =
========
root@dxnpnc05:~ # zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 9.24G 24.0G 54.5K /rpool
rpool/ROOT 2.46G 24.0G 18K legacy
rpool/ROOT/sol10u7 2.46G 24.0G 2.46G /
rpool/appl 18K 24.0G 18K /appl
rpool/export 2.41G 24.0G 18K /export
rpool/export/home 2.41G 24.0G 2.41G /home
rpool/local 1.63M 24.0G 1.63M /usr/local
rpool/opt 279K 24.0G 279K /opt
rpool/perl 23K 24.0G 23K /usr/perl5/site_perl
rpool/pkg 107M 24.0G 107M /usr/pkg
rpool/pkgsrc 263M 24.0G 263M /usr/pkgsrc
rpool/swap 4G 27.4G 545M -
root@dxnpnc05:~ # lustatus
Boot Environment Is Active Active Can Copy
Name Complete Now On Reboot Delete Status
sol10u7 yes yes yes no -
=========
= Creation =
=========
root@dxnpnc05:~ # lucreate -c sol10u7 -n sol10u8
Analyzing system configuration.
Comparing source boot environment <sol10u7> file systems with the file
system(s) you specified for the new boot environment. Determining which
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Updating system configuration files.
Creating configuration for boot environment <sol10u8>.
Source boot environment is <sol10u7>.
Creating boot environment <sol10u8>.
Cloning file systems from boot environment <sol10u7> to create boot environment <sol10u8>.
Creating snapshot for <rpool/ROOT/sol10u7> on <rpool/ROOT/sol10u7@sol10u8>.
Creating clone for <rpool/ROOT/sol10u7@sol10u8> on <rpool/ROOT/sol10u8>.
Setting canmount=noauto for </> in zone <global> on <rpool/ROOT/sol10u8>.
ERROR: cannot open ' ': invalid dataset name
ERROR: cannot mount mount point </.alt.tmp.b-0lg.mnt/opt> device < >
ERROR: failed to mount file system < > on </.alt.tmp.b-0lg.mnt/opt>
ERROR: unmounting partially mounted boot environment file systems
ERROR: cannot mount boot environment by icf file </etc/lu/ICF.2>
ERROR: Unable to mount ABE <sol10u8>
ERROR: Unable to clone the existing file systems from boot environment <sol10u7> to create boot environment <sol10u8>.
ERROR: Cannot make file systems for boot environment <sol10u8>.
======
= After =
======
root@dxnpnc05:~ # zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 9.24G 24.0G 54.5K /rpool
rpool/ROOT 2.46G 24.0G 18K legacy
rpool/ROOT/sol10u7 2.46G 24.0G 2.46G /
rpool/ROOT/sol10u7@sol10u8 68.5K - 2.46G -
rpool/ROOT/sol10u8 110K 24.0G 2.46G legacy
rpool/appl 18K 24.0G 18K /appl
rpool/export 2.41G 24.0G 18K /export
rpool/export/home 2.41G 24.0G 2.41G /home
rpool/local 1.63M 24.0G 1.63M /usr/local
rpool/opt 279K 24.0G 279K /opt
rpool/perl 23K 24.0G 23K /usr/perl5/site_perl
rpool/pkg 107M 24.0G 107M /usr/pkg
rpool/pkgsrc 263M 24.0G 263M /usr/pkgsrc
rpool/swap 4G 27.4G 545M -
root@dxnpnc05:~ # lustatus
Boot Environment Is Active Active Can Copy
Name Complete Now On Reboot Delete Status
sol10u7 yes yes yes no -
sol10u8 no no no yes -
Any ideas? Thanks!I have been trying to use luupgrade for Solaris10 on Sparc, 05/09 -> 10/09.
lucreate is successful, but luactivate directs me to install 'the rest of the packages' in order to make the BE stable enough to activate. I try to find the packages indicated , but find only "virtual packages" which contain only pkgmap.
I installed upgrade 6 on a spare disk to make sure my u7 installation was not defective, but got similar results.
I got beyond luactivate on x86 a while ago, but had other snags which I left unattended. -
Event.hits property does not work at Adobe 9
I have just discovered that the property "event.hits" does not work at Adobe Reader 9 properly.
I have some JavaScript, which uses this property:
if (event.hits.length > 0)
var targetPos = event.hits[0].position;
Now, at Adobe Reader 9 the value of "event.hits[0].position" is not correct.
At Adobe 8 Standard this JavaScript works very well!
Can you comment this issue?Hello to everyone!
There is a some PDF file, which works fine on Adobe 8 and does not work properly on Adobe 9.
You can download this file from the following hyper-link:
http://www.pdf3d.co.uk/pdf/box97.pdf
When I open this file on Adobe 8 then gold arrow works fine.
In this case the gold arrow (pointer) has a true location on the box.
When I open this file on Adobe 9 then gold arrow has a false location.
In this case the gold arrow (pointer) has a false location on the box.
Could somebody can to me a some suggestion?
Thank you,
Peter -
MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!
This topic has been moved to Operating Systems.
MSI Live Update not working Windows XP Professional 64bit Edition!!!Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I? -
Dashboard link is not working from BI Publisher
Dashboard link is not working from BI Publisher. Please let me know How to fix this problem.
Please somebody guide me.
Dashboard link is working fine from the Apps Server Machine. But the link is not working from other machines. Do I need to setup machine.domain:<port_number> any where.
Thanks,
Vara -
My mail is not working from my iPod touch. I looked it up and it says it trouble shooting? But they are not giving me anything to fix it. I restored my iPod touch to see if that worked and it didnt. Can anyone help me?
Can you access the account from another device?
Without you telling use the email provider and type of account we can't really help you. -
HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.
HP Pavilion dv6-6181TX
Product No. A3U49PA
Genuine Windows 7 Home Premium 64
(but i upgraded it to windows 7 ultimate)
System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
so when i restart my computer and press Esc and then choose F11 i get this message :
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occured while attempting to read the boot configuration data."
i saw this from the forum
http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
Had the C partition been split/shrunk to form a new partition previously?
Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
please help me & Thank you for your time,
This question was solved.
View Solution.If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
Older versions of Partiton Wizard Free work:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Thumbnail preview works in adobe reader 9 but does not work in adobe 8.0
I have small issue. Thumbnail works in adobe reader 9 but but does not work in adobe acrobat 8.0 in win xp
Anyone going to tell me how to do this uninstalling and installing??????????
I don't want to mess things up even more! Geez--I'm almost 60 years old,
need to work and this might be costing me a job. I'm not 20 and text and
e-mail etc every day. I'm just asking for a little help that as I see it ,
is due to a "glitch" with Adobe's software. They can easily in their
technological minds put a warning on anything before someone downloads
anything such as "If you download this and you have already downloaded
that,, then it won't work." How tough would that be??? They, like most other
major corporations, are in it for the money. What has happened to customer
service???
I need a step by step with my hand held and so it won't screw up things even
MORE. Adobe...get your customer service and your software together...This is
draining. I may lose a job over it. I need to have my computer running well
at this point in time as there is no extra time to spend dealing with
software issue that are a result of Adobe's software incompatibility.
I was on the phone for TWO hours last night telling people exactly what was
going on. I even read the error message word for word. No one would help me
unless I coughed up the money that I don't have...and in addition I will
lose a job that might get me some money. This is why I am so upset. Why is
dealing with Adobe always so difficult??? Of course, I am upset. I'm
actually a lovely person. It is just that this stuff rattles my nerves.
Especially when there is a jobwith a raiseinvolved that I may lose as a
result.
Now I had better get dressed and ready for the job I have now before I am
late for work and lose that job, too..... -
Webcam not working with adobe air
hey frnds,
i'm trying to capture webcam snaps and storing it on local desktop.
Below code of capuring snap is working with flex but same code not working in adobe air.
I'm using Adobe Flash builder beta 2
is any setting is required to use webcam with adobe air?
i'm using following code
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/halo" creationComplete="init();">
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<fx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.core.UIComponent;
import flash.media.Camera;
import flash.media.Video;
private function videoDisplay_creationComplete() : void
var camera:Camera = Camera.getCamera();
if (camera)
videoDisplay.attachCamera(camera);
else
Alert.show("Oops, we can't find your camera.");
private function capture_click() : void
var snap:BitmapData = new BitmapData(320, 240, true);
var snapBmp:Bitmap = new Bitmap(snap);
snapBmp.width = 320;
snapBmp.height = 240;
if(snapshotHolder.numChildren > 0)
snapshotHolder.removeChildAt(0);
snapshotHolder.addChild(snapBmp);
snap.draw(videoDisplay);
]]>
</fx:Script>
<mx:HBox>
<s:Panel title="Video">
<mx:VideoDisplay id="videoDisplay" creationComplete="videoDisplay_creationComplete();" width="320" height="240" />
</s:Panel>
<s:Panel title="Snapshot">
<mx:UIComponent id="snapshotHolder" width="320" height="240" />
</s:Panel>
</mx:HBox>
<mx:HBox>
<mx:Button label="reload camera" click="videoDisplay_creationComplete();"/>
<mx:Button label="capture" click="capture_click();"/>
</mx:HBox>
</s:WindowedApplication>
Camera is connected but cannot see anything inair,
plz guide me in this.
thx in advanced,I seem to have the same problem. When creating an web application it works fine, but when creating a desktop application it doesn't. I can't figure out what the problem is.
Does anyone know? -
The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.) -
PDF Printer not working in Adobe XI
The PDF Printer option is not working in Adobe XI. We are using Windows 8. When I open the printer box and select Adobe PDF, I get an error message stating "The server threw an exception." The "Save as PDF" and "Convert to PDF" options work but those options are not always available.
A server exception would suggest you are using Acrobat in the cloud. I don't have an answer in that case other than trying later. Is the Adobe PDF printer indeed installed on your machine or in the cloud?
-
File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13
File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
ThanksI hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print -
In 5s, personal hot spot does not work from time to time. Not detected
In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.
Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
also avoid special characters making a password. hashtags or open brackets for example doesn't work too good. -
File sharing is not working from pc to imac os x 10.9.2
file sharing is not working from pc to imac os x 10.9.2
Hello there Karen,
It sounds like you are having to power cycle your modem to get internet back every single day. We can start by troubleshooting your Airport Express to help isolate the issue. I would first perform a Soft Reset, then test the issue again. If needed as a last resort I would then perform a Hard Reset:
Soft reset
Connect the device to power and wait for it to complete its start up process. To learn more about the start up process, please see All about Wi-Fi base station Status Lights (LED).
Press and hold the reset button with a pen, pencil, or straightened paperclip for 1 full second, then release it. The light (LED) will begin flashing amber, indicating that the device is in soft reset mode.
From the AirPort menu bar item, choose the network created by the device (the network name does not change).
Open AirPort Utility from Applications > Utilities.
Select the base station, then click Edit (The Edit window will indicate that the base station is in Soft Reset mode).
Move through the tabs to make changes to your passwords or other settings as needed, and click Update and Continue as required
Quit AirPort Utility.
Hard reset
Press and hold the reset button with a pen, pencil, or straightened paperclip until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
Release the button and the device will reset.
Wait about a minute for the base station to finish restarting, then open AirPort Utility from Applications > Utilities.
Select the base station from Other Wi-Fi Devices, then click Edit.
Select the Other Options button.
Select "Restore previous settings" and click Next until you get to the final window.
AirPort Utility will indicate that Setup is complete. Click Done.
Quit AirPort Utility.
Resetting an AirPort base station FAQ
http://support.apple.com/kb/ht3728
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Asm link not working from kolkata
hi
http://www.oracle.com/technology/tech/linux/asmlib/install.html
this link is not working from india / kolkata.
what to do?javadev991 wrote:
Now working.
What?
Just cross check certain things
- The servlet you specified in Form Action is correct
- The Form Method must be POST not GET
- The query string param you are specifying in URL which is classifiedsearchtype, You are trying to get the same param in the servlet. It is case sensitive.
Maybe you are looking for
-
Airport Extreme,iBook G3,Panther 10.3 Can't get it to work
Hi I have a iBook G3 running 10.3 800MHz with Airport card installed but can'r get it to connect with Airport Extreme knows it works my daughter connect to it with her PC but I can't get it to work with my iBook Put in all the Wireless Network name a
-
How to Upgrade 11.1.0.7 to 11gR2 in EBS R12.1
Hi Experts I wanna upgrade the 11.1.0.7 to 11gR2 in EBS R12.1 which is on a single node architecture. I am not sure about the Patches that i need to apply on Apps & DB tier even after going through couple of metalink note like 1058763.1 & blog http:/
-
PSE8 crashes when I try to email photos using Adobe Email Service
The PSE8 Organizer crashes when I attempt to email photos. In the 2 months that I have owned this program it has crashed several other times, but the current problem with emailing photos always occurs at the same step in the process. I have read al
-
How to pass in complex data to a web service using dynamic client
I wrote to dynamic client to access the complex example in weblogic 7.000, I would like to know how I passed in a complex type to a dynamic client.
-
Probleme beim upload der neuen App Version: "Redundant Binary Upload "
Ich habe versucht die neue Version meiner App hochzuladen und ich bekomme immer wieder folgende Fehlermeldung. Redundant Binary Upload - There already exists a binary upload with build version '32.0.3.51.99524' for train '1.0.50' Ich verstehe allerdi