Live type error message

When I try to open Live Type it gives me an error message: wrong type. What to do

never mind I got it thanx, pandini

Similar Messages

  • Wrong Operand Type Error Message - please help

    I have built a form and I keep getting the message - Wrong Operand Type every time I either try to preview or save to PDF as the file suddenly becomes 90% blank (I can see the content boxes for any date fields in the form and if I click the highlight fields option I can see place holders for all of the content) but other than that it wont process properly. I have tried going through the document and made sure that item by item the fields are all inline with each other, have the same fonts, etc. I even tried deleting out every single item in the form, previewing it, then placing that item back in and moving on to the next to try a process of elimination to see if I could figure out what item(s) were causing the problem, but still no luck.
    Please help.
    CG

    I, too, am having this error message. I read somewhere that it is either because of the font Helvetica Nueue, or because the files is being shared between a PC and a Mac. The quickest fix I have found, is to take the pdf and open it in Illustrator and convert all the text to curves. Then it should work correctly.
    I don't think anyone has found a definitive answer.
    thanks

  • M35-S359 Wrong Machine Type error message

    Well I will try this again!
    HDD replaced
    Attempted System Restore
    Failure - Error message "Wrong Machine type"
    Restore Disk is Valid. I have used it before to restore the Original Drive.
    Attempted to run Ghost from the Restore Disk. HDD took the Restore but will NOT boot from it.
    I have taken all the proper steps in setting up the Laptop.
    Others POSTed for this Model Laptop have had the same issue
    Im not going to send it in to an ASP.
    I am Toshiba Certified but this one has been a real Pain in the Bottomside.
    Im about ready to do what one of my former Customers did to his Laptop out of frustration.
    He smashed it until nothing was left.
    It seems to me Toshiba want us to sell and support their products but we are not getting the support that we need!
                                    Steve Toquinto
                                    [email protected]

    I, too, am having this error message. I read somewhere that it is either because of the font Helvetica Nueue, or because the files is being shared between a PC and a Mac. The quickest fix I have found, is to take the pdf and open it in Illustrator and convert all the text to curves. Then it should work correctly.
    I don't think anyone has found a definitive answer.
    thanks

  • Firefox v 19.0.2 won't play videos gives Mime type error message

    Using Firefox v. 19.0.1 on Mac 15' Macbook Pro running OS X 10.8.3. Trying to play videos. Have webm and MP4 version videos to play. Code works fine and videos play in Firefox on my machine. When downloading web pages from the server I get "No video supported format & Mime type found" error messages.
    HOw does one fix this?
    Thanks,
    George

    You may need the flash player required to play those types of files or you may need to update your plugins.
    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • Live Paint Error Message

    I wonder if I could contribute something to the forum. It isn't clear (to me anyway!) that one cannot create a Live Paint group if there is text in the area to be converted. This I discovered fairly rapidly but the regular error message is very general in content, it is up to the user to discover what is inhibiting the conversion. But I have found that, if I create text on paths and then delete the text, it is easy to leave isolated anchors on the artwork which are barely visible and they will inhibit the creating of a Live Paint group. When I hit the snag, I looked in all the usual places online but there didn't seem to be any obvious threads. In the end I worked it out for myself. This is not a criticism, I think Illustrator CS6 is superb!
    Steve

    You might try using Object>Path>Cleanup to remove stray points and empty text paths.

  • Conditon type - error message

    Hi SD consultants,
    Spare your valuable time to resolve this
    I get error message in assigning access to condition type.
    When I entered value ZM01 into the Access sequence field of condition type ZM01, I got message "E: An access sequence has not been assigned for the header condition."
    any solutions thanx Manisha

    Hi manisha
    I think you are assigning a access sequence to the header conditon type that is why it is giving this error .
    But no header condition types have , will have access sequence, so you cant assign access sequence to header condition types
    Regards
    Srinath

  • Msi live monitor error messages

    I have a msi  mx 440 card and on msi live monitor i get error messages saying the service has not been started hit ok then does it again hit ok then loads any reason for this thanks

    Quote
    Originally posted by ChippyBlue
    I have tried reinstalling live monitor, and uninstall it and try downloading the lastest ver. from MSI Downloads.  But still left with the same problem
    MSI KT4v MS 6712
    Athlon XP 2400+ Thermaltake Heatsink fan 9000RPM
    256 Mb DDR PC 2700
    Nvidia GeForce 5200 8x 128 Mb
    SBlaster
    HDD 0 Maxtor60Gb HDD1 Maxtor20Gb Lacie 120Gb both Ata 133-7200 RPM
    USB 2.0
    CDR 52x
    CDRW 48x12x50x
    Thermaltake silient 420w P.S.
    Epson 1660 Scanner
    Epson Stylus Color 1160
    Joystick
    Floppy Drive
    PS2Mouse

  • Windows Live Mail error message appears in subpage

    I am getting an error message when I try to go from an email message to a sub page and the sub page will not load.
    The message in a box says "X There was a problem sending the command to the program" and when I click on OK an Internet Explorer heading is shown with "connecting" in the tab and the rest of the page is blank. The page does not load.
    Can anyone suggest a solution?
    Thanks
    ronswold

    Hi mate
    If you would search for this error message (There was a problem sending the command to the program) on google page then you would get a lot of hits.
    Seems that you are not the only one who gets the error message but this has nothing to do with your Toshiba notebook but with the Windows OS.
    In most cases an firewall causes this issue possibly you have installed Zonealarm or something like this
    Check this and remove or disable the settings which could prevent the software from loading.

  • PGI for STO movement type error Message no. L9005

    Hi Gurus,
    I have created an STO.Created delivery and confirmed TO.
    Now while doing PGI,single step only(647 movement type),
    system throws the following message,
    "" Error during search for WM movement type (641 1 L K  )
       Message no. L9005 "".
    As per my checking for both IM movement types 641 and 647, ' 641 ' has been assigned as
    Ref movement type and " 601"  has been assigned as WM movement type.
    601 is maintained in WM.Should I maintain 641 in WM?That case I have to change SAP std settings..
    If so pls provide me the details for 641 K.
    Kindly help.
    Best Regards

    Hi Kumar,
    Try the following:
    Maintain an entry for your warehouse with movement type 641 SpStIn and Movment Indicator l combination in transaction OMLR.
    And also ,
    Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location.
    Here check whether the warehouse number is assigned to your plant and storage location.
    Thanks!
    Preethi
    Edited by: preethi R on Dec 2, 2008 10:50 AM
    Edited by: preethi R on Dec 2, 2008 10:50 AM

  • Error Message: Sorry, a serious error has occurred that...

    This seems to be a common problem, however, I have not found a fix. I am somewhat technologically savvy, but limited! Listed below are my specs and details to the problem.
    Software- Premiere Pro (Version 5.03) Recently updated
    OS- WIN7 Core 2 Duo CPU E8400 3.00GHz 4.00GB RAM
    Footage used- all types
    Error message text-
    Sorry, a serious error has occurred that requires, Adobe Premiere Pro to shut down. We will attempt to save your project.
    The problem-
    When attempting to start PP it allows me to start a new project, select setting, and sequences. However, as the program begins to start up the new project the error pops up. The only option is to click ok, which in turn locks up the program.
    Also any files that I have previous created also will not open properly.
    Also, I have recently lost a drive that contained many of my old PP projects. I've read that some people have this problem when losing a drive that once related to possible PP preferences and scratch disks...once again I am limited on understanding how that all works.
    I have restarted, cold boots, warm boots....clean uninstall, clean reinstall of PP and all components, updated chipset, display adaptor is up-to-date (NVIDIA GeForce 9300 GE) ...also I am an administrator of the workstation
    **Through my many failed attempts from reading forums I have also at sometimes received a RunTime Error R6025 (pure virtual function call)
    I have no 3rd party effects
    not using Mecury to my knowledge.?

    Has it worked OK in the past?  If so, try System Restore.
    While your computer might meet Adobe's minimum requirements, it is way underpowered to run Premiere Pro properly. 
    See here:
    http://forums.adobe.com/message/6336879#6336879

  • Error message in enhancement spot

    Hi...,
    I want to give error message in enhancement spot.
    I am using FM 'CR_BT_ORDER_POST'.
    wHEN USER WILL TRY TO CHANGE SERVICE ORDER.i WANT TO THROUGH ERROR MESSAGE.AND KEEP THE CURSOR ON SAME SERVICE ORDER SCREEN
    But now it is coming out of IW32.WHEN I AM GIVING ABORT MESSGAE TYPE.ERROR MESSAGE IS NOT ALLOWED IN UPDATE TASK MODE.
    tHANKS,
    aNIL

    Hi,
      I think you have to use the function module 'POPUP_TO_CONFIRM' give the error message what you want to and if the user press any button keep the control on the same screen.
    Regards,
    Himanshu

  • Error message when IDOC Monitor

    Dear Friends,
    When i monitor IDOCs, i meet one type error message, and have no idea about it, anybody can give some ideas? and what dose the 'BOL' mean? please describe it in detail, thanks a bunch~
    Senario:
    Direction: 2 (Inbound)
    Message Type: INVOIC
    Current Status: 51 (Application document not posted)
    Error messages in application log as following:
    Cost document from BOL not found 73769702-001
    Can't determine fiscal year
    Freight condition not found 73769702-001 Z003
    Freight condition not found 73769702-001 Z006
    Error in Bose Freight Processing

    These are posting error which you need to correct. BOL means Bill of Lading. You can go and check documentation of different fields in segment/idoc types for more information,

  • Global Error Message Trapping

    I would like to be able to trap an unexpected error at the application level and redirect the user to another page.
    We are performing SQL Injection testing and are security analysts are able to inject text, for example in the source SQL for a region, that causes an unexpected database error. I would like to trap any ORA type error message and redirect the user. I have not been able to determine if there is a field/object/etc where the message is stored. If I knew that, I was hoping ot build an application process that could check for an error and if present, peform the redirect.
    Any help would be appreciated.

    Roel -
    We found another article doing something similar to your solution but more simplistic. This is working for me. I modified the Javascript to look only for 'ORA-' messages and redirect to another page.
    http://www.apex-blog.com/oracle-apex/capturing-custom-error-messages-from-database-triggers-21.html
    This solution does not seem to work in trapping errors for the interactive report pages. Is there a different template used for these pages?
    Thanks again.

  • I am receiving Basic Idoc Type error while I am executing SWO1 for BKPF

    Hi
    I am receiving Basic Idoc type error message while I am trying to test BKPF object. Please note that the Business Object is delegated to a custom BO. Can anyone tell me where the linkage is established between IDOC type and BO.
    Thanks
    Arghadip

    Arghadip,
      Can you check the transaction WE57?
    Thanks

  • T400: Error Message - There was a problem connecting to the TPM

    Hi,
    I'm a new ThinkPad user. I just got my T400 about a week ago, and I'm a fan of it right away. But there's this one little thing that really annoys me. The second day I used my laptop I got this error message: "There was a problem connecting to the TPM (Security Device) on this computer," and I've received this message since then, every time I turn on my laptop.  What does it mean? And how do I get rid of this error message? Thanks!  
    Moderator note: Type + error message added to subject line for clarity.
    Message Edited by Agotthelf on 06-07-2009 10:23 AM
    Solved!
    Go to Solution.

    go into bios and check whether the TPM is activated or deactivated in the BIOS. Make sure it is on. If the problem persists then call Lenovo, could be a hardware level problem.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

Maybe you are looking for