Live Type - Fades and Title Movement with Animation
I am wondering how to add fades (fade in and fade out) to text or animation. I am also wondering how it might be possible to
animate text. Thank you very much!
1. Simple. It's just a matter of adding two keyframes to an effects container that change the opacity level over time.
2. Very possible. Add any of the dozens of animation presets to a LiveType timeline and look in the Inspector's Effects tab to see what the active parameters are and deconstruct them. Do your own experimentation.
3. Read the extensive .pdf manual found in the Help menu bar item.
Similar Messages
-
Any Problems using SSL with Safari and the move with Internet explorer to require only TLS encryption.
Hi .
Apple no longer supports Safari for Windows if that's what you are asking > Apple apparently kills Windows PC support in Safari 6.0
Microsoft has not written IE for Safari for many years. -
I want to buy an New iPad(4th generation) WIFI CELLULAR, but i not live in U.S. I live in Colombia and want it with cellular. somehow to buy the iPad with cellular that comes unlocked for my GSM local carries?
They may be purchased unlocked at full price. But whether you can use them in Brazil depends on whether you have GSM service there.
Note that if you buy in the US then any warranty work will require you to bring the device to the US for service. The US warranty is only good in the US, not in Brazil. You would be better off buying it in Brazil which will also save you duty and import taxes plus US sales tax. -
Hello, i would like to know how to make horizontal sites and it moves with the scroll
Hello, i would like to know how to make horizontal sites and it moves with the scroll
Hi
You can refer to these videos :
http://www.lynda.com/Muse-tutorials/basics-horizontal-scrolling-websites/108131/115685-4.h tml
https://www.youtube.com/watch?v=gZI_K1TXqOM
Thanks,
Sanjit -
Live Type Textures and Background
Does anyone know why when I import my live type titles, the background or textures do not transfer over into Final Cut Express? The fonts and the effects work, but the background does not transfer?
Thanks for your help!As Da Nam has pointed out you just need to check a little box next to "Render Background"
If you are Rendering a Movie then when doing so a little dialogue plate comes up and you can check the box next to "Render Background"
If you are using the Live Type project directly then the box is in your Project Properties. In this case while you are in Live Type hit cmd-zero, and when the Project Properties plate comes up check the box next to Render Background. -
Re emmitters and match move with SLOW smoke
I am trying to put some smoke into far distance chimneys, and the background is pan moving.
If I use match move, I don't get the same floating gently upwards effect that I get if its stationery. How can I pan and yet achieve the same effect. Otherwise it looks like an extremely windly day and the smoke is billowing in the same match move as the background, yet I want the smoke to come out of the stack and move with the pan.
Also I cant seem to get an extremely slow speed for the smoke to emitt, even with speed on 1... and loads of other tweeking i.e low birth long liffe...its still a bit too fast. Any tricks and advice please..???Glad you solved your problem... There are ways to improve Motion's interactive performance.
1) If you're using Ram Preview, clear it periodically.
2) Keep your render quality at Draft or Good until the very end.
3) Text is especially draining of resources in Motion 3. Turn off layers you've finished with to improve performance while you work in other areas.
4) Definitely turn off Timeline and Layer thumbnails.
5) Don't have any layer selected when playing - the thumbnail for the Inspector Tab has to be generated when you stop.
Patrick -
i have an older yamaha receiver and projector both without hdmi inputs but component video instead. I would like to get apple tv and start renting movies through iTunes but apple tv only supports hdmi and ive read that iTunes has codes to prevent the use ot analog cables with movies. Is there a way to adapt hdmi to component video for both apple tv and iTunes easily?
Yes, HDMI is the only supported method. Also, with converters you will run into issues with HDCP (which will prevent you from streaming DRM content from iTunes etc) as well as resolution.
-
How to make page name and title change with AJAX driven site?
I am building a travel site. I am a fairly basic but longtime
DW user. I built the site in DW. I made a template and all pages
are then based off the template. I hired a programmer to do the
complicated hotel searching code. He says that he used AJAX and I
know also php (all the pages are whatever.php)
What I don't like and he says can not be changed, which there
must be a workaround for, is that, for example, a user will be on
the spahotels.php page. Or perhaps they are on the whatshot.php
page reading the latest article about jungle treehouse eco lodges.
So far so good, the name of the page is "spahotels.php" or
"whatshot.php".
But, on each (and all) of the site pages we also have a hotel
search on the top left nav. So from any page, the user can do a
hotel search. The problem I have is that...once they do this....the
results they are given in the main window of the page, are totally
unrelated to spahotels or whatshot about jungle lodges...so if they
have now searched for tokyo business hotels, it looks ridiculous
and confusing that the page name says "spahotels.php" and the page
title says Find Great Spa Hotels.
My programmer says AJAX was the best way to do the hotel
search functionality (which I dont know anything about so if he
says so maybe so but I don't know) but he also says there is no way
to make the page name or title change to reflect what the user has
done on the left search function. Makes sense..they are clearly
unrelated.
However...this is a terrible user experience in my opinion.
So...one idea he had was to find a javascript code that changes the
page title/name.
Does anyone have some ideas of how to solve this issue?
The page (rough, we are still developing) is
http://www.bluehippotravel.com/spahotels.php
Try doing a seach for something on the left nav hotel
search...and see what I mean...the name of the page stays
spahotels.php and the title stays Spa Hotels. I get it...I
think...why it does...but it looks stupid if you are looking for
something else in your search (which of course the user will be).
Any ideas??? Thank you so much in advance!!
Lauratheir is no out of box way to avoid this but you can change this in the Designer.
check this technet for more details how to do:
http://social.technet.microsoft.com/wiki/contents/articles/17557.sharepoint-2013-change-page-title-in-wiki-sites.aspx
also good information here
http://stackoverflow.com/questions/10799682/change-sharepoint-main-page-name-without-changing-url
http://www.topsharepoint.com/change-title-tag-on-sharepoint-sites
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Live Type textures and Objects not working
Everything had been working. Moved to a new home...so I had to take editing suite apart. Now when I open LiveType there seems to be a red render bar...and when i try to apply textures and objects to a new track...you see it in the canvas as a small black line. And you get nothing if you try to render the movie. though the font seems to be working
please helpLook in this discussion: http://discussions.apple.com/thread.jspa?threadID=1392289&tstart=0
To nutshell it, use an app called "Pacifist" to revert your ProApps to 4.0 from 4.5 and Quicktime from 7.4 back to 7.3. You can find links to all that in the other discussion. I found my liveType dead this morning and the culprit appears to be the combination of the ProApp update and the Quicktime update. I used Pacifist to revert and it was simple and fairly painless. Install Pacifist, drop the "old" update's .pkg onto the Pacifist icon in your Application folder and rock on. -
Black screen and slow movement with Gnome and ati driver
Greetings, I use ati driver free.... and Gnome... and gnome sometimes works very slow and shows black screens... other days works fine...ideas?... i try installed catalyst-utils, but gdm dont start.
Greetings and thanks.try to flash bios & graphic card drivers from the link below.
http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_list.aspx?CategoryID=46 -
Start and stop movie with key press
Can anyone please tell me how to do this?
I'm very new to flash.
ThankyouPlace this code in the timeline that you are trying to control--pressing and releasing a key will play/stop depending on which mode it is currently in.
stop();
var isPlaying:Boolean = false;
stage.addEventListener(KeyboardEvent.KEY_UP, keyUsed);
function keyUsed(event:KeyboardEvent)
if (isPlaying){
stop();
} else {
play();
isPlaying = !isPlaying;
If you have other questions, try to anticipate what you might be asked and include those details. -
Live Type iMovie 08 = Upside Down Text
Weird proble. Brand new MacBook, iMovie 08, Live Type, making short little movie and all is well in iMovie as far as viewing. Title created in Live Type is fine, once movie is exported (tried several formats), the Live Type text is flipped, and small in the upper left corner. I can't figure it out. Any ideas?
Hmmm.. I removed the plist and for the time being it seems to have worked. Is this a common problem with 10.5.x and iMovie? I have used iMovie for year and never had a problem. What's especially odd is it was occurring in both iLife 08 and iLife HD.
Since this is a new MacBook I have yet polluted my system with my own installs, but one of the installs I have done is the Perian codec. I am wondering if that has anything to do with the issue. -
GRN Report for 103 and 105 movement
Hi all
IS there any report available in SAP
Like i have done GRN with movement type 103 and 105
So i want to know for a specific plant against specific movement type let us say
my po is of 100 quantity
i have done GRN for 20 qty mov type 103 and 20 qty with mov type 105
GRN of 40 qty mov type 103 and 4 qty with mov type as 105
grn 20 qty with mov type 103
grn 20 qty with mov type as 103
so i want a report material doc created for mov type 105 w.r.t 103 mov type material doc
and only 103 material doc whose 105 is not done
plz give me ur valuable input
regds
shaileshya that is possible to get but not thorug standard MB51
look do this way create a query in SQVI
select tables MSEG and MKPF , EKBE now from this table select the field movement type as selection critera and posting date , plant etc.
now select the field MSEG,Movement type, PO no.
i will give you the logic system should select the material document for movement type 105 then against this material document you can get the po now(that is already there in mb51 just change the layout) now from the purchase odere no selected you can get the material document for movement type 103 from table EKBE that is purcahse order history . check with abaper by using this logic -
Live Type not in FCP 7 & I need it badly
I sold my old system that I had and was using FCP 6 with Live Type. On my new system I got the FCP 7 and Live Type is not on there. I am screwed because all of my graphics and templates that I put togther are in Live Type and I need the program to run them. I have never used Motion and it seems to be a huge pain to try to learn and I don't have time to learn it to keep my editing going. Is there a way to get Live Type back on my system with out having the old FCP 6 pack. I do not have that anymore. I need help fast!!!
That is where the problem is. I let all the FCP 6 discs go with the system since I was getting the full suite & package on the new computer. Now I do not have them the load Live Type onto the system.
-
Recording knob and slider movements from an external synth in a good way
How do I record the knob and fader movements made on an external synth into Logic in a good way?
I have managed to do it but Logic writes a new region over the top of the region containing my midi notes. When I stop recording the new region which contains the CC data disappears behind the region containing the midi notes.
On top of this, once I've moved the regions around so I can select the one containing the CC data I can't see anything for it in the Hyper editor (though I know the changes have been recorded as it plays back.)
Any guidance would be much appreciated.I often make a duplicate of my Midi track/Software Instrument track (assigned to the same Audio object - standard KC for this is shift+Return) beneath the original track and then record fader and knob movements on the duplicated track.
In the Piano Roll->view->Hyper Editor select Modulation/Pitch bend or "Other" and choose a Midi Controller number frome the menue which opens, the selected Controller (e.g.#21) will be displayed underneath the Piano Roll and you can edit it with your pointer/pencil/Eraser tool.
Maybe you are looking for
-
How do I manage my iCloud Data across my apple devices
How do I manage my iCloud data across various devices....like my iPhone 5 and Macbook
-
Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?
-
DS console operators cannot change their passwords?
I've setup named developer accounts with the operator role, so that (among other things) they can tell who has an object checked out. But it seems that console users cannot change their own passwords: someone with administrator access needs to do it
-
Can't add keywords (locked) until I select image in the Finder
I am running OS X 10.4.11 and Bridge CS4 for Mac on my G5 Tower. Sometimes when I go to add a keyword to an image, Bridge says I can't because the file is locked (or something to that effect). If I go to the Finder, and click on my image, then switch
-
Hello. I like javafx scripting like JSON. But I want to set some node to a variable. For example: Group { content: [ SomeNode {} SomeNode {} // I want to set this node to 'var someNode'; }Two methods here. one: var someNode = Some