Live type files look grainy and do not fill the background when used for green screen backgrounds.

live type files look grainy and do not fill the background when used for green screen backgrounds. Ideas?

What I want to do is somehow make my entire iMovie project smaller by compressing it somehow but without losing any footage or audio or quality. At the moment the project is a 56GB iMovie project lasting approx 1hr. I have a mixture of miniDV footage, titles created in Live Type (they are better quality than anything available in iMovie) and audio.
The miniDV footage is automatically compressed when it transfers from my camcorder to my Mac, no worries there.
The LiveType titles contain a motion background (imported into LT) and then text which appears and disappears at set points. The titles vary in length but are about 5 seconds each.
The file size for the LT titles is approx 180MB per clip, the movie requires about 20 or so of these clips, making a very large file size overall.
Is there a way that I can save something in LT so that the file size is smaller yet still keep the quality and use the clip in my iMovie ?

Similar Messages

  • Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

    Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

    stop the download if it's stalled, and restart your download.

  • My sound is not working on my phone unless i put my head phones in, my phone is not on silent and can not here the ring when phoning someone...help

    my sound is not working on my phone unless i put my head phones in, my phone is not on silent and can not here the ring when phoning someone...hel

    Restart the device. http://support.apple.com/kb/ht1430
    Reset the device. (Same article as above.)
    Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • "The file is damaged and could not be repaired" error when trying to open a PDF in Reader

    A few of our employess (only 3 out of over 100 so far) have been getting the error, "The file is damaged and could not be repaired" when trying to open some PDFs. Other people are able to open the same PDF files with no error. It's happening on about 10% of the time. I've read a bunch of threads here with this isue and tried some suggested fixes and nothing has resolved the issue. Here is what I have found works and does not work and the info on their computers:
    Computers:
    1 Dell Vostro desktop running WIndows 7
    1 Toshiba Satellite C55 runnign Windows 8
    1 Samsung ATIV Book 4 running Windows 8
    All using Adobe Reader XI but we did uninstall that version and tried previous versions and still got the error.
    Did Not Work:
    As suggested by the company that we use online for claims adjustments where this error is occuring, we tried using a different PDF creator since the files were created using a free PDF creator by the employees. PDF995 and PDFcreator (pdfforge) did not resolve the issue. I then created the PDFs with my Adobe Acrobat, uploaded from my computer to the online program, and that did not resolve the issue.
    Saving the file to hard drive and then opening in Adobe did not work.
    Turning off Protected Mode and Enhanced Security did not work.
    Compatibility View settings enabled in Internet Explorer 10 did not resolve the issue. The previously mentioned claims adjustment software company we use online was code for IE so is not fully compatible with other browsers.
    That being said I did try to open the PDF files in Chrome and it also did not work. Same error message.
    Does work:
    I download the file they cannot open onto my hard drive, open in Adobe Acrobat, Save as a pdf, then email it to them and they can open it via email attachment.
    If they close the error and continue trying to open the file over and over sometimes it will eventually open.
    Is there a setting in Windows that is preventing them from opening a small % of files some of the time? Thanks in advance for any help!
    James

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Every time apple sends an update for my Itunes it goes wrong. last time this happened I got someone to fix it for me. I am very techno phobic and do not understand the on line instructions for uninstalling and reenstalling.Please help in simple English.

    when ever Apple sends an update to my pc, it knackers up my itunes. The last time this happened I got someone to fix the problem for me, I am very techno phobic and do not understand the uninstalling and reinstalling. It comes up error MSVCR80. Please can someone help in simple English , as the technical jargon just goes over my head.
    much Thanks

    The last time this happened I got someone to fix the problem for me, I am very techno phobic and do not understand the uninstalling and reinstalling.
    I think you should get a friend or family member who knows a bit more about computers to fix this for you.
    They should try the following instructions.
    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I'm attempting to transfer files, address book, etc from an external hard drive to my new Mac-mini using migration assistant.  The external drive is showing up on my desktop but Migration Assistant is not seeing the drive when searching for devices

    I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant.  I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop

    I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion   Start up assistant wouldn't see my extrnal drive with the Time Machine files on it.  After many tries, I skipped the restore there and let the system boot.  I could see my external drive from Finder and the files looked OK.  I was told to use Migration Assistant and it had the same problem.
    I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD.  I went ahead and told it to continue and it started to restore my apps, settings, and documents.  It's been going for a couple of hours, and is close to being done.  I expect to see my old system restored when it is finished.
    Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
    It's been a month or so since your post  Did your get it to work?

  • How do i get my old password back.. my grandson changed it and does not remember the numbers he used?

    My grandson changed my password to get onto my ipod and cannot remember the number he put in. how do i open it and change back to original password (4 numbers)   thankyou in advance.

    You'll need to connect it to the iTunes library you normally sync it with and restore it.  If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • Oci_close does not release the connection when using DRCP

    Hello everyone,
    we are currently testing the deplyment of DRCP with 11g. I have the whole thing setup (correctly to my best knowledge), but I am facing an issue. The call to oci_close does not seem to release the connection to the pool as I would expect and therefore we see similar behavior like we were getting without using the DRCP.
    Our setup is using two RAC instances running 11.1.0.6.0, I am using PHP 5.1.6 with PECL installed oci8 1.3.4. The DRCP pool is configured and started, each with 100 max servers.
    When the webserver is idle it looks, well, idle.
    SQL> SELECT INST_ID,NUM_BUSY_SERVERS FROM GV$CPOOL_STATS;
    INST_ID NUM_BUSY_SERVERS
    1 0
    2 0
    The script is as simple as it gets:
    <?php
    $c = oci_pconnect('scott','tiger','IWPPOOLED');
    $s = oci_parse($c, 'select * from emp');
    $r = oci_execute($s, OCI_DEFAULT);
    oci_close($c);
    sleep(30);
    ?>
    What I would expect is that the script would connect to the pool, do the work for a tiny moment and then release the connection for usage by other script.
    But after I point the browser to the script, I get a 30 second loading time (as expected) but the server is busy all the time, like this:
    SQL> SELECT INST_ID,NUM_BUSY_SERVERS FROM GV$CPOOL_STATS;
    INST_ID NUM_BUSY_SERVERS
    1 0
    2 1
    After the 30 second sleep, it is released and busy servers are back to 0.
    If I load the server with ab using 256 connections:
    ab -n 1000000 -c 256 -k http://mywebserver/ocitest.php
    the pool is maxed out and the connects are stalling:
    SQL> SELECT INST_ID,NUM_BUSY_SERVERS FROM GV$CPOOL_STATS;
    INST_ID NUM_BUSY_SERVERS
    1 95
    2 95
    My network config for this service is following:
    IWPPOOLED =
    (DESCRIPTION =
    (LOAD_BALANCE=ON)
    (FAILOVER=ON)
    (ADDRESS = (PROTOCOL = tcp)(HOST = 10.1.16.33)(PORT = 1521))
    (ADDRESS = (PROTOCOL = tcp)(HOST = 10.1.16.34)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = IWP)
    (SERVER=POOLED)
    (FAILOVER_MODE=
    (TYPE=SELECT)
    (METHOD=BASIC)
    (RETRIES=5)
    (DELAY=3)
    The phpinfo() look like this:
    OCI8 Support enabled
    Version 1.3.4
    Revision $Revision: 1.269.2.16.2.38.2.20 $
    Active Persistent Connections 1
    Active Connections 1
    Oracle Instant Client Version 11.1
    Temporary Lob support enabled
    Collections support enabled
    Directive Local Value Master Value
    oci8.connection_class IWPAPP IWPAPP
    oci8.default_prefetch 100 100
    oci8.events On On
    oci8.max_persistent -1 -1
    oci8.old_oci_close_semantics Off Off
    oci8.persistent_timeout -1 -1
    oci8.ping_interval -1 -1
    oci8.privileged_connect Off Off
    oci8.statement_cache_size 20 20
    I am using the instant client for 11g
    Any ideas?
    Thanks!
    Michal

    Don't forget to use oci_free_statement($s); See "Closing Oracle Connections" in The Underground PHP and Oracle Manual. (I was just simplifying this example today for the next release of the manual).
    You may also see the "dedicated optimization", where a pooled server in a non- maxed-out pool is retained (unless needed by another PHP process) under the assumption that the initial PHP process might become active again. See http://www.oracle.com/technology/tech/php/pdf/php-scalability-ha-twp.pdf
    Feel free to email me offline (see my profile) if there are questions/data you don't want to post.
    cj
    Edited by: cj2 on Oct 16, 2008 8:12 AM

  • CS5.5 Upgrade does not accept the serial number used for CS 5 Master Collection install

    Installed CS5 Master Collection from disk with given serial number.  CS5 Master Collection installed fine.  Inserted CS 5.5 Design Standard disk, and entered its serial number.  It asked for a qualifying product/serial number.  I selected "Master Collection CS5" and entered the serial number I had just used to successfully install that product.  I get an error saying "This serial number is not for a qualifying product.  Please try another."

    Serial Number or Activation Issues
    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here are some links to help making contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

  • Hangs up when i try to access email, do not have the problem when using internet explorer

    do not get indication of number of emails on home page. have att.net which uses yahoo.com. when i click on email icon i get the rotating circle icon, but just stays there for longer than i have been willing to wait. get out of there by right click and reload. do not have problem if using internet explorer

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • HT204384 What are GT/s?- "Computers that use the PCIe bus express their speed as GT/s"? and what else is the card slot used for?

    If I understand correctly the card slot on the Macbook Pro is for flash memory? Can it be used for anything else?

    Read http://support.apple.com/kb/HT3553?viewlocale=en_US&locale=en_US
    for information on the card slot.
    GT/s is gigatransfer per second. It takes into account the overhead of the PCIe bus.
    Allan

  • FCE not seeing new Live Type files correctly... (Leopard issue?)

    There appears to be a problem in LiveType and FCE as of Leopard.
    LiveType files created BEFORE Leopard was installed import fine, but files created AFTER Leopard was installed will not import and return an error:
    File Error. 1 File Recognized. 0 Access Denied. 1 file unknown.
    Live Type files that are rendered as movies are importable and that is the workaround. But of course they cannot be edited again unless the Live Type file is reopened and re-rendered.
    IOW, no import of a Live Type file directly into FCE.
    Pro apps download doesn't appear to apply to FCE and you need a FCP serial # to access it anyway.
    All suggestions appreciated.

    Never mind. I figured it out.

  • When I attempt to open a PDF file I saved from a website, I get the message "There was an error opening this document. The file is damaged and could not be repaired." Is there any way to correct this problem?

    When I attempt to open a PDF file I saved from a website using Safari, I get the message "There was an error opening this document. The file is damaged and could not be repaired." When I save the same PDF file using FireFox it opens up immediately. Is there any way to correct this problem with Safari?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Some pdf files wont open error "this file is damaged and could not be repaired"

    just recently this error has occured on a number of email pdf attachments
    "there was an error oping this document. the file is damaged and could not be reapiared"
    I am using Mozilla thunderbird and adobe reader 10.1.2.
    I have forwarded the attachments to other edress's and get the same error
    whn i download the attachment to my pc and check the properties
    the general tab gives the file size etc but the PDF tab is empty except for
    Fast Web View NO and Pdf version 0.0
    i am running winxp professional

    What can you see when you open the file with a text editor?

  • I use Outlook for my email on the Safari web browser, and about 90% of the time when I want to attach a pdf or jpg file the email message will crash.

    I use Outlook for my email on the Safari web browser, and about 90% of the time when I want to attach a pdf or jpg file it fails and about 50% of the time when I want to send a standard text massage it will also fail and the email massage crashes. The only way I can get my Outlook to work is if I switch to Firefox web browser. I would rather not switch to a new web browser if I don't have to.
    It seems like what ever the problem is that its related the Safari web browser, because it works fine on the Firefox web browser.
    I think its some kind of plug-in failure because it giving me a LOC ERROR:
    LOC ERROR: Unable to locate localized string for resource ID 5007.
    How can I fix this Plug-in?
    And, yes my softwer is conpletly updated…

    That's an Outlook issue. You'll probably get better responses posting on the Office for Mac forums.

Maybe you are looking for