Live Type Not Responding

Hi Sirs.
When I try and open Livetype, after about 20sec. The Program hangs and does not respond. Any ideas.
Thanks
Jon

It has worked fine. Up and till one day when I tried opening the application.
Live Type version. 2.1
MOSX 10.4.11
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
Recently up graded my quick time to 7.6
Weary of trashing my FCP Preference systems since they mess up projects I am working with at the moment.
Recently added 3ivx components in my qicktime library. (don't know if this does anything)
Thanks for taking an interest in my problem.
Hope you can help.
Jon

Similar Messages

Live Type not in FCP 7 & I need it badly

I sold my old system that I had and was using FCP 6 with Live Type. On my new system I got the FCP 7 and Live Type is not on there. I am screwed because all of my graphics and templates that I put togther are in Live Type and I need the program to run them. I have never used Motion and it seems to be a huge pain to try to learn and I don't have time to learn it to keep my editing going. Is there a way to get Live Type back on my system with out having the old FCP 6 pack. I do not have that anymore. I need help fast!!!

That is where the problem is. I let all the FCP 6 discs go with the system since I was getting the full suite & package on the new computer. Now I do not have them the load Live Type onto the system.

Live Type not loaded when I loded Final Cut Studio

I just upgraded to a Mac Pro from an i Mac. I loaded Final Cut Studio and Live Type was not loaded I do not see it in my applications folder. Do I have to reload the whole Final Cut app. or can I load Live Type only. If so from which disc would I have to load Live Type ?

You can install it from and older version of FCP. Run the installer and it will tell you which discs to load.

Live Type Not Opening

I have FCE 4 and Live Type came with the program. Every time I try to open Live Type I get an error message. I have tried to reinstall it 3x and no luck. Each time my computer says the installation was successful. Below is the error message:
An unexpected error occurred.
(* -[NSProTabViewItem _displayedLabelForRect:]: unrecognized selector sent to instance 0x8fc58d0)
What do I do?

I had to get my hard drive erased and install from scratch....it was a pain. After 45 minutes on the phone with apple support they were the ones to suggest either that or a new computer. I chose the former. Good luck

My firefox is not responding, i get a message (firefox is not interacting with windows) I have tried cleaning up cookies, catch etc nothing works. i have unenstalled and reenstalled, as soon as i type a letter firefox wont respond. Help.

As soon as i type a letter in fire fox it stops working, i get (FIRE FOX IS NOT RESPONDING, WINDOWS IS NOT INTERACTING WITH FIREFOX) I have tried all i can and now give up. Ive cleared all cookies and catch, etc i have gone in to help and tried out instructions for the not responding but no luck. I have windows 7 and have not had problems in the past with firefox. I have uninstalled and reinstalled still no luck.

go to '''TOOLS '''then '''OPTIONS''' then '''ADVANCED''' then '''NETWORK tab''' then '''SETTINGS tab''' and select the options '''NO PROXY''' click '''OK''' and '''OK '''again in the next screen. With that you have disabled the proxy settings.
''if you like to not disable the proxy settings choose'' : '''Auto-detect proxy settings for this network''' (it is in the same session)
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Office 2013 (Word, Outlook, Excel, Power point) are not responding after live update

I had problems all last week with my Office applications not responding. I tried to uninstall and reinstall the software which did not solve the problem. I then did a samsung 5 recovery to factory state and installed office all over again which temporally
worked. My computer then prompted a windows live update after which the same problem came back with windows application not responding.
Please help as this is holding up my work.

Hi,
Please check your update patch list, if you had installed the Office 2013 SP1. please try to update the display card dirve. See the below thread:
http://social.technet.microsoft.com/Forums/en-US/34401d63-6c3b-47e6-ab20-9ed9b70d890b/outlook-2013-sp1-unusable-since-sp1-update-?forum=officesetupdep
Regards,
George Zhao
TechNet Community Support

I cannot use the bottom part of my touch screen. It would not respond to any of the touches I make. Is the screen broken or have I stuffed up my settings? I want to be able to type on my iPhone

I cannot use the bottom part of my touch screen. It would not respond to any of the touches I make. Is the screen broken or have I stuffed up my settings? I want to be able to type on my iPhone

Basics from the manual are restart, reset, restore from backup, restore as new. If you've been through ALL these steps and you still have the problem, you'll need to bring the phone to Apple.

Live Type Template not displaying correctly in FCE

I'm trying to use the "Ink Title" template from the Live Type Template Browser: File > Open Template > Template Browser.
But when I import the .ipr file into FCE 3.5.1 it comes across with a transparent background and is not showing the artwork. I set up each of the other "Ink" templates and imported them into FCE and they run fine -- with the Ink design.
Can you tell me what I might be doing that is keeping the "Ink Title" template from displaying correctly?
Thanks.
core duo Mac OS X (10.4.6)

You have to go to the sequence settings in Live Type and check Render Background. Press Apple + 0 and you will see the Render Background Check box. I bet it is not checked. Hope this works. Tell me if it doesn't.

Live Type "effects" not present

I've periodically loaded and unloaded the (2) Live type Media discs when my laptop has been low on space. Never had the problem about to describe before.
I have my hard drive partioned into two drives: The hard drive and a Videostore (where I keep my Final Cut Pro media). I also usually load the Live Type Media on that drive.
This time, all the Livefonts, Fonts, Textures and Objects media shows up when I open LIVETYPE...but the "effects" do not.
I've re-installed the discs several times.
Any thoughts would be appreciated.

I copied the appropriate files off of another computer that had the effects on them, and they correctly came up on the computer i was attempting to load them on.

Live type files look grainy and do not fill the background when used for green screen backgrounds.

live type files look grainy and do not fill the background when used for green screen backgrounds. Ideas?

What I want to do is somehow make my entire iMovie project smaller by compressing it somehow but without losing any footage or audio or quality. At the moment the project is a 56GB iMovie project lasting approx 1hr. I have a mixture of miniDV footage, titles created in Live Type (they are better quality than anything available in iMovie) and audio.
The miniDV footage is automatically compressed when it transfers from my camcorder to my Mac, no worries there.
The LiveType titles contain a motion background (imported into LT) and then text which appears and disappears at set points. The titles vary in length but are about 5 seconds each.
The file size for the LT titles is approx 180MB per clip, the movie requires about 20 or so of these clips, making a very large file size overall.
Is there a way that I can save something in LT so that the file size is smaller yet still keep the quality and use the clip in my iMovie ?

FCE not seeing new Live Type files correctly... (Leopard issue?)

There appears to be a problem in LiveType and FCE as of Leopard.
LiveType files created BEFORE Leopard was installed import fine, but files created AFTER Leopard was installed will not import and return an error:
File Error. 1 File Recognized. 0 Access Denied. 1 file unknown.
Live Type files that are rendered as movies are importable and that is the workaround. But of course they cannot be edited again unless the Live Type file is reopened and re-rendered.
IOW, no import of a Live Type file directly into FCE.
Pro apps download doesn't appear to apply to FCE and you need a FCP serial # to access it anyway.
All suggestions appreciated.

Never mind. I figured it out.

Why is my ipad disabled, I can type in search engine and it will find this but unable to do anything else as pad is shaded and not responding to touch

why is my ipad2 disabled, I can type in the search engine and this is working fine but the screen is shaded and is not responding to touch please advise

If the Reset does not work, try this.
Go to Settings>Safari>Clear History, Cookies and Data or Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Live Pro- program not responding

Since I purchased my web cab on the 26th, it was working great. On the 29th, all of a sudden, the program will not respond.
I have tried to uninstall it and reinstall it but that did not work.
Any suggestions?

I have just the same problem. Installed LivePro yesterday and it worked allright until I took a snapshot. Since then nothing works. Tried to uninstall and reinstall but it do not work.
It might be a problem caused by Windows XP Home. The MS-program CCAPP seems to get problems and WebCamCenter uses all resources on the PC. My son has the same camera, which has worked allright for nearly one year, but yesterday evening he got the same problem, which is unresolved.
Could it be an error in an automatic update from MS? Or unlucky circumstances if the update takes place while the WebCamCenter is running?
I discovered one thing. When I logon to my computer with another user-id, it works! I also see, that when I use another user-id I have an icon "Install Shield Update Manager", which I do not have when I logon with the normal id.

Live type does not appear in hard drive

I'm in the middle of reinstalling Live Type on my computer. I deleted it earlier today, trashing everything that had "Live Type" in its name, and have tried reinstalling the software from the original discs.
I have two discs ("Live Type Data" 1 of 2 and "Live Type Data" 2 of 2) that I've tried to reinstall. I get the dialog boxes indicating that the discs are installing on the computer's hard drive, then after about 50 minutes, I get a message that "Installation was successful!" with a green check mark. After both discs were installed successfully, I restarted the computer (although there was no instruction to do that), but the software's icon didn't appear in my Applications folder. When I use "Find" to look for anything with "Live Type," all I get are files of previous titles that I'd created.
Is the application software on another disc and I'm only loading the "media" for the software's use?
A while ago, I installed only the first disc, but I still had the software's icon appear in my Applications folder.
Is the Live Type application software stored on my FCE 1 (or FCE 3) installation disc.
Any suggestions are appreciated.
Gary

Nick Holmes wrote:
Final Cut Studio 3 no longer includes LiveType. Its functionality has been incorporated into Motion.
I just got Final Cut Studio HD and was surprised it didn't have LiveType, which I love. I learned Final Cut at a college and they had LiveType. Still doing the install as we speak, but just wondering: Is it JUST AS EASY and fun in Motion as LiveType or is it way more involved? Is there any way to get LiveType?

Firefox is constantly crashing when I am in the Pogo Games app - it even crashed when I was on live c hat with a Pogo helper - this is SO frustrating - all I see lately is the (not responding) message - please help!!!!

I will be playing a game in Pogo, when the game suddenly stops and starts and then locks up. The message up top is Mozilla Firefox (not responding) - then if I close out and reboot, Firefox gives me "how embarrassing - we lost your session" message........please help! I LOVE Firefox, but I do not know what the problem is - I have deleted the histories and most of the bookmarks thinking it might help, but it is getting worse.

Hell0.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

Live Type Not Responding

Similar Messages

Maybe you are looking for