Live Update issues? See here.

Hi all,
This sticky topic has been created so you can report any issues you have with MSI Live Update software.
So if you experience any issue related to this program, please post here instead of creating new thread. We will do our best to help you as long as it's not common problem with particular version of LU.
Please make sure to post Live Update version, error message and code, and also follow this >>Posting Guide<< so we and MSI know what systems/combos are affected by it.
Thanks

Current Live Update version: v 6.0.021
Download available >>HERE<<
OS support: Win 8.1/Win8/Win7 32&64 bit
Live Update 6 supports the following MSI product lines and items:
Motherboards: Drivers / BIOS / Utilities;
Graphics Cards: Drivers / BIOS
Do NOT use Live Update for AIO PC and Notebooks.

Similar Messages

Re: Live Update issues? See here.

I am using Live Update v6.0.0.24. App will not instal Intel ME driver 10.0.31.1000. It downloads the driver but will not install. Receive no error messages of any kind. Just nothing happens.
I thought I installed the driver manually successfully but De...

Quote from: Nichrome on 19-July-15, 19:28:17Hi
Try to roll back the Windows updates and see if it works fine then.
Give your PC few restarts, might help too.
Hello and thanks for the prompt response. Unfortu...

10.4 Smart Playlist Live Update Issue

Hi All,
Among the other challenges presented by the 10.4 series of updates (greyed out commands, disabled shortcuts that come and go for no apparent reason) the smart playlist live update function seems to be broken. I do a lot of tagging and use smart playlists to identify tracks that need particular tags. I used to be able to highlight them all, run a script and they'd all get tagged and clear out. Now it breaks down after a couple and grinds to a halt. Works fine if you turn live update off, run the script then turn it back on, but that kind of defeats the purpose right?
On the smart playlist thread, I've also encountered an issue where I can no longer edit a smart playlist: command-I doesn't work and "edit smart playlist" is greyed out in the "file" menu.
Anybody else know what the deal is, or is it just part of iTunes becoming less of a music player because it's "more than a music player?"

Thanks Leonie - issue with editing smart playlists isn't that I don't know how to do it, it's that it periodically isn't an option (i.e. command-I or file menu drop-down are greyed out & doesn't matter what or where you click). I'm running Snow Leopard 10.6.8.
Not sure how to tell what command is getting stuck, but it's definitely the interaction between the script and the live update feature because it works perfectly when live update is off (and the script is fairly simple - see below).
Thing is that it's not the smart playlists themselves that aren't working, they are all fine, issue is limited to the live update feature. I use SPs to tag particular things (ie dragging to a playlist causes it to show up in the smart playlist if it's not tagged - so I go to smart playlist & run the script to tag all of them in a batch and once they've got the tag they should disappear from the SP). Here's the script, though, slightly modified for me by the author - it's actually pretty ******* if you want to steal it. He wrote one for removing tags too (all using the grouping section):
property okflag : false
-- check if iTunes is running
tell application "Finder"
    if (get name of every process) contains "iTunes" then set okflag to true
end tell
if okflag then
    try
        tell application "iTunes"
            set selected_tracks to a reference to selection
            activate
            if selection is {} then
                display dialog "Please select songs first."
                return
            end if
            try
                display dialog "Enter group to add:" default answer ""
                set dialogInfo to result
            on error dialogError
                return
            end try
            set grouptoadd to text returned of dialogInfo
            repeat with current_track in selected_tracks
                try
                    set current_grouping to grouping of current_track
                    set group_delimiter to ", "
                    set AppleScript's text item delimiters to the group_delimiter
                    set the track_groups to every text item of current_grouping
                    if current_grouping is "" then
                        if (length of (genre of current_track as string)) is not 0 then
                            set track_groups to {}
                        end if
                    end if
                    if track_groups does not contain grouptoadd then
                        set track_groups to track_groups & grouptoadd
                    end if
                    set grouping of current_track to the track_groups as string
                on error trackErr
                    display dialog "Unable to update track \"" & name of current_track & "\"-" & trackErr
                end try
            end repeat
        end tell
        display dialog ((count of selected_tracks) as string) & " track(s) updated."
    on error myErr
        display dialog myErr
    end try
end if

FM2-A85XMA-P33 live update issues

Hello,
I am running win7 and after doing the live update the system wont boot anymore.
First it starts up and then i cant do anything at all.
The srceen goes blanc and i can shut off or reset the PC with the power/reset buttons and have to cut the power to shut it down.
I`ve tried it a few times but everytime the same result.
If i dont do the live update its running like it should.
Other thing is that if i try to install Win 8 or Win 8.1 the same thing happens..
If i enable the win8 feature in the BIOS i only get the shell if i restart the pc and cant install Win8.
Maybe a partition issue.
Any ideas?
Vincent

Stop using Live Update! It likes to brick boards.
Apart from that: >>Posting Guide<<

Z77A-GD65 Live update and mouse

Hey all!
trying to see if theres any update to the BIOS for my MB.... but when i enter liveupdate f rom the BIOS I cant use the mouse (well I can move it around but it wont register any clicks).
So what shall I do?

You should skip using crappy Live Update and see for a new bios yourself: http://www.msi.com/product/mb/Z77A-GD65.html#/?div=BIOS
For flashing >>use the MSI HQ Forum USB flasher<<

I installed 10.6.8 through Live Update, now Snow Leopard doesn't start at all! And I don't even have my Leopard DVD here! What should I do?

Two days I ago I installed 10.6.8 through Live Update. But, since then, I can't open Snow Leopard! Everytime I got the grey page and the request to reboot turning the Macbook off and then on. I could use Safe Mode, used Utility to repair all the processes and deleted any cache but nothing, tried a procedure of renaming the kernel found on the net and now I can't even open the Safe Mode. I don't even have here my Snow Leopard dvd! What should I do? Called the customer service twice but not that great help. Can I try to use another Snow Leopard dvd (i.e. from a friend of mine)? Should I format the partition and reinstall it? I'm really angry about this, got this Macbook since less than one year and it crashes after an autoupdate, probably forcing me to 700 km x 2 trip to get that dvd (and of course those of any other app I got?!)? Grrr.

... tried a procedure of renaming the kernel found on the net ...
If you've been doing things like that, you probably destroyed your system. You need the installation disc that came with the machine. Another one won't work, unless it's for the same model.
I'm really angry about this, got this Macbook since less than one year and it crashes after an autoupdate ...
It failed to boot because of incompatible third-party system modifications that you installed. We know that, because it started in safe mode. Then, instead of removing the modifications, which would have solved your problem, you did something that immobilized the machine completely. You should not have updated the OS without having an installation disc available, and you shouldn't be using a computer at all without backups. Apple can't protect you from the consequences of making bad choices.

Possible issue with MSI Live Update 5

Hi guys, purchased a brand new MSI R9 280X Gaming 3G GPU from Scan.co.uk just before Christmas.
Whilst playing around with GPUz i happened to notice that my card appears to have had at least one new BIOS for it (possibly two) since release. I downloaded MSI Live Update 5 from your site and ran the tool however it reports my GPU BIOS Version as unknown and doesn't find any BIOS updates for my card.
Just wondering why this would be and if i can get a link to the latest BIOS and instructions on how to manually flash.
My system specs are as follows
AMD FX8350 @ 4.8Ghz 1.55v / Corsair H100 Cooler
ASUS Sabertooth R990FX R2.0
16GB Corsair Vengeance 1600Mhz CL9 @ 1866Mhz CL9,9,9,24-2T
MSI R9 280X Gaming 3G
2 x Sandisk Ultra 256GB SSDs in RAID 0
Fractal Design Define XL R2
If you need any further info please let me know. Thanks

First off this is a Users-to-Users Forum not MSI tech support if you wanted to address them. Don't use LU5 as it is quite buggy. You can't see if there are new vbios versions available as you can't compare gpu-z numbers or such. Different batches of the same model can use different vbios versions which have different (higher or lower) version numbers. A higher version number might be a different not newer vbios. To check your S/N and a copy of your current vbios is required.

The Ap store on my iPad shows threr is an application update ready. However thhere is no update. My wife has the same issue on her iPad. What needs to be done?

The Ap store on my iPad shows threr is an application update ready. However thhere is no update. My wife has the same issue on her iPad. What needs to be done?

There are countless posts about this. There's a problem at Apple's end and has been so for several days.
However, I have no trouble updating using itunes on my computer and later syncing to my device.

[GeForce 6] Live Update(?) issue - display

hi. This weekend there was an update for the geforce6600, I believe. The reason I'm guessing there was is because I have live monitor set on
auto-updates. Sometime on saturday I was prompted with a "cannot connect to server", this prompt gave me two options "retry" or "switch to",
behind the prompt was a "MSI live monitor" window. Since I couldnt 'retry', nor 'switch to' live update, I rebooted my machine (a pretty standard solution).
Upon rebooting, i got the standard login to windows prompt, followed by the standard windows chimes. however, nothing, except for my background was displaying.
I could get into the windows task manager fine when i hit ctrl-alt-del.
I've deduced that it may be an issue with an incomplete bios update.
has anyone encountered this problem and how do I alleviate this? i apologize if this seems inarticulate, but these emoticons are probably gonna induce epilepsi
thanks
I'm running windows 2K - sp 4;
system: geforce6600gt vga; 400w ps; 1gig ddr ram; 3200+ athlon xp (barton); 40gig maxtor hdd

incomplete bios update wouldn't even boot your machine. i think it's a software problem. try booting windows in safe mode and removing the latest software you have installed. then reboot into normal mode.
just restarting windows might also help.

Neo2 defaut FSB frequency , live update and core center issues

Hi,
This is the point : i bought a brand new 915P Neo2 last week,
out of the box results : Windows XP SP2 install is OK right
now, Graphics Card is working properly but the system is
still unstable !
--> I decided to install MSI core center but while running
pc freezes !
---> tested MSI live update, packets download is working
but the tool is still unstable and pc freezes .... while testing system...
---> tested a small utility (third party) from intel website
to compute P4 target and actual frequency
this tool reports that my p4 is running at 3.24 Ghz,
I double checked and found that defaut FSB was set to 810 Mhz
even after hardreset and bios safe mode, CPU is running at 203 Mhz * 16 = 3248 Mhz
I really dont understand why reset value has been set to 203 Mhz ?? why not 200 Mhz
so MSI 915 P defaut setting is 1 % overclocking strategy ?
the bios setup is not really taken into account ??
have you ever pointed out this problem with defaut frequency ? is this a problem ?
what is your opinion regarding MSI utilities ?
I have a lot of random pc freezes, too many for this board !
all advices are welcome !!

I don't usually recommend bios updates, but you should seriously consider it if you can get the board to run stable.
Test your ram with Memtest86. This should give you an indication if you can do a flash from DOS, plus it will test the ram for you.
Try setting your FSB to 201. On the 865/875 boards that will hold the setting. 203 is typical of MSI and other manufacturers, but it really isn't high enough to be considered overclocking, and certainly isn't high enough to cause problems. But it keeps them in the race with the others when the reviewer's determine which board is best by looking at the decimal places.
You don't list your power supply data. Power and ram are the usual culprits, with heat being another.
Quote
have you ever pointed out this problem with defaut frequency ?
Who are you asking? Have you?

Z77A-GD65, "Missing Operating System" after running Live Update

So here's the brand new computer I assembled:
$309.99 HIS IceQ Boost Clock H795QC3G2M Radeon HD 7950 3GB 384-bit GDDR5 PCI Express 3.0 x16
$219.99 Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Processor Intel HD Graphics 4000
$199.99 Acer G276HLDbd Black 27" 6ms (GTG) Widescreen LED Monitor
$179.99 Western Digital WD Black WD2002FAEX 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$159.99 AZZA Hurricane 2000 CSAZ-2000 Black SECC Japanese Steel ATX Full Tower Case
$154.99 Intel 335 Series 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
$154.99 Intel 335 Series 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
$144.99 MSI Z77A-GD65 LGA 1155 Intel Z77 Motherboard with UEFI BIOS
$119.99 OCZ ZT Series 750W Fully-Modular 80PLUS Bronze Power Supply
$99.99 Kingston HyperX Beast 16GB (4 x 4GB) 240-Pin DDR3 2400 (PC3 19200) RAM
$99.99 Logitech G930 USB Connector Circumaural Wireless Gaming Headset
$99.99 Microsoft Windows 7 Home Premium SP1 64-bit - OEM
$74.99 ASUS Black Blu-ray Burner SATA BW-12B1ST/BLK/G/AS
$59.40 CNPS9900MAXR Red CPU Cooler
$49.95 3YR DATA RECOVERY SERVICE I INT. HD For (WD Black 2TB)
$34.99 2 yr Replacement W/ ADH plan For (Acer 27" LCD)
$10.99 LITE-ON SK-2030/B Black PS/2 Wired Slim Keyboard
$9.99 LITE-ON SK-2035/B Black USB Wired Slim Keyboard
I wanted to have the SSDs in RAID0 with Win7 and the games on it, then a volume on the 2TB that the RAID backs up to, with the remaining 1.5TB just free storage space in another volume. I couldn't get raid past Win7's Where Do You Want To Install screen during installation, so I ended up installing the OS on just one SSD. I figured I'd backup the functioning OS to the 2TB then rebuild the RAID array and copy the OS back onto it.
The system had been up an running for a full day, being updated left and right nonstop, several big games put in, etc etc, everything was running fine until I decided to run MSI Live Update and started pumping in updates. Constant errors as I went along, but generally it'd just skip to the next installation attempt. When it got down to updating the BIOS and did it's DOS injection thing, it for forcefully shut down the PC, restarted, did Post, flashed the BIOS wallpaper, restarted again, Posted, no BIOS wallpaper, just endless "Missing Operating System". Walked away, went to bed, back up and at it for a few minutes (Will be back tonight for however long it takes to get it fixed). I switched the BIOS switch over, no dice. Feels like it's a BIOS "OS" that's gone, and that a BIOS reset/flash is in order or something, but I've never done these things.
Thanks in advance for any rendered assistance that leads to resolution.

The SSDs are definitely hooked up where they're supposed to go; the motherboard had a little sticker n' everything for where the two SSD dedicated SATA 6.0gbps ports were :P AND my case has 2 specific slots for SSDs which don't use the hotswap electronics PCB passthrough like the other 4 bays, which is where the 2T is installed. I was going to take the 2TB out and hook it up normally and see if that changed the speeds, but I'm leaning towards wishful thinking. Did I mention I went and made several volumes with different file cluster sizes to test and see if that was the issue? Alas, all were borked. It still confuses me though because every once n' awhile it'd do massive burst speeds the way it's supposed to.
As far as I can recall I'm using up to date BIOS, the last one or two. One BIOS switch is set for the last BIOS, the other switch is a step back devoid of the Windows 8 stuff. I believe I have all the drivers up to date as well. Intel 335's are literally brand new, mine hadn't been more than 3 weeks old off the production line when I received them; IE, they should pretty much have the latest firmware on them which spares me the risk of destroying something precious
I MIGHT have a SATA external enclosure around here somewhere, if so, the 2TB could go in that for additional testing until I figure out where it's sustaining speeds of 2-10MB vs 100-150MB/second.
Meanwhile, the good news is that the system has been fully operational and hella stable. I hadn't slept in almost 3 days, playing and installing stuff nonstop. The system continues to run cooler (32c@stock CPU speed) as the thermal paste sets in, the knocking sound of the fan in the PSU has gone away upon me reawakening a bit ago, and amazingly, this massive system (with EIGHT fans) draws only 60-65 watts while desktopping. That's just astounding

MSI-6712 BIOS update issues

I have a PC, running XP Pro SP3, which was built for me nigh on 9 years ago.
Motherboard: MSI-6712 (KT4V-L) Version 1.0 (North Bridge KT400A Rev 80, South Bridge VT8235 Rev 00)
CPU: AMD XP2800+ CPU (Socket A 462, 3000 MHz)
Memory: 1.0GB DDR
GPU: nVidia GeForce FX-5200 (128 MB)
About 4 years back I considered updating the BIOS, but the MS LiveUpdate utility (v 3.5 I think it was) no longer worked (wrong URL). Tried updating it, but the update (can’t remember the version) shut down my system whenever I tried to use it. So I rolled back and left it.
Recently, a program I was evaluating (running on .Net 4 Client Profile) caused my PC to freeze up and after uninstalling I discovered all manner of problems with USB peripherals (recognition and auto-play issues).
Tried to restore a backup (Retrospect Express HD) from a Maxtor One Touch III external drive but it wasn’t having it, presumably because of the drive recognition issues, and a straight System Restore wouldn’t complete (because XP would freeze at log off).
I feared there had been hardware damage, but decided to try a clean re-install of XP Pro. The person who built the PC had left a folder of system set up files (VIA chipset 4in1, LAN, RealTek AC97, nVidia drivers, utilities etc) on the hard drive (which I backed up) but when it came to installing XP, I couldn’t figure out which chipset drivers to install, as there were multiple versions (presumably for his purposes). So I let XP install the default windows drivers and then replaced them with the latest VIA 4in1 set for the KT4V-L from the MSI download page (can’t post link) – driver version 5.11a, release 20.4.2007
Seemed to go well, but it was suggested to me that it might be a good time to update the BIOS. So I installed MSI Live Update 5 and ran a scan. Strange thing is that an automatic scan (which pulls up just the nVidia driver and utilities) reports that none are installed and a manual scan reports that the BIOS, Drivers and Utilities are the latest version and no there is need to update. How can that be? I’ve never updated the BIOS and the only other utility I re-installed is PC Alert 5.
Yet when I run a SIW (System Information for Windows) scan and it reports the following:
BIOS Properties
BIOS Vendor American Megatrends Inc.
Serial Number 00000000
BIOS Version Version 07.00T
Firmware Version 101.114
BIOS Date 04/02/01
BIOS Size 256 KB
BIOS Starting Segment F000h
DMI Version 2.3
Characteristics
supports ISA Yes
supports MCA No
supports EISA No
supports PCI Yes
supports PC Card (PCMCIA) No
supports Plug-and-Play Yes
supports APM Yes
upgradeable (Flash) BIOS Yes
allows BIOS shadowing Yes
supports VL-VESA No
ESCD support is available Yes
supports booting from CD-ROM Yes
supports selectable boot Yes
BIOS ROM is socketed Yes
supports booting from PC Card (PCMCIA) No
supports Enhanced Disk Drive specification Yes
supports INT 13 for Japanese NEC 9800 1.2M floppy (3.5-inch, 1024-byte sectors, 360rpm) No
supports INT 13 for Japanese Toshiba 1.2M floppy (3.5-inch, 360rpm) No
supports INT 13 5.25-inch/360K floppy services Yes
supports INT 13 5.25-inch/1.2M floppy services Yes
supports INT 13 3.5-inch/720K floppy services Yes
supports INT 13 3.5-inch/2.88M floppy services Yes
supports INT 05 print-screen Yes
supports INT 09 and 8042 keyboard services Yes
supports INT 14 serial services No
supports INT 17 printer servicesYes
supports INT 10 CGA/Mono video services Yes
NEC PC-98 No
supports ACPI Yes
supports legacy USB Yes
supports AGP Yes
supports booting from I2O device No
supports booting from LS-120 Yes
supports booting from ATAPI ZIP drive Yes
supports booting from IEEE 1394 deviceNo
Smart Battery supported No
BIOS Boot Specification supported Yes
Function key-initiated Network Service boot supported No
Enable Targeted Content Distribution No
How is it that Live Update 5 doesn’t pick this up?
So, apologies for the convoluted post (thought it best to explain the events leading to this), but what to do?
1.   Do I need to update the BIOS, given that it has never been done and I now have the latest VIA 4in1 drivers installed?
2.   Why is Live Update 5 not reporting the status correctly and is there anything I can do to correct this.
3.   Otherwise, if a BIOS update, is warranted, should I go ahead and download directly from the Global MSI webpage and then which version? (can’t post link). I note from the version descriptions that it was v1.7 (26/12/2002) that added support for AMD XP 2800. Strange then that the guy who put together my PC, would not have updated the BIOS from v1.0 to 1.7 at that time!!
4.   Should I also update the nVidia driver, and if so, when? Before or after a BIOS update or is that irrelevant?
Video Adapter NVIDIA GeForce FX 5200 (Microsoft Corporation)
Code Name NV34
Video Processor GeForce FX 5200
Technology 0.15 0m
Adapter DAC Type Integrated RAMDAC
PCI ID 0x10DE / 0x0322 (nVidia Corporation / GeForce FX 5200 [NV34.3])
PCI sub ID 0x1462 / 0x9360 (Micro-Star International Co., Ltd. / MS-8936 (FX5200-T128))
Memory128 MBytes
BIOS String Version 4.34.20.22.00
BIOS Date 08/01/03
PnP Device Id PCI\VEN_10DEDEV_0322SUBSYS_93601462REV_A1\41FEB96E400008
Video Mode Description 1440 x 900 x 4294967296 colors
Driver Version 6.14.10.5673
Driver Date 2004-08-03 22:29:56
DirectX DirectX 9.0c (4.09.0000.0904)
Driver Name nv4_disp.dll
Driver Description NVIDIA GeForce FX 5200 (Microsoft Corporation)
Edit: Actually, looking at the original SIW scan report I see that there are some errors relating to DirectX. Not sure if I need to update DirectX (surely MS Update does that automatically) and/or the nVidia driver.
5.   One other thing that concerns me is that the SIW scan reports that the BIOS is reporting wrong values for the DDR memory. What’s that about?
Memory Summary Reported by BIOS
Warning! Wrong values reported by BIOS
Maximum Capacity 3072 MBytes
Maximum Memory Module Size 1024 MBytes
Memory Slots [unknown]
Error Correction
Memory Timings 3-3-3-8 (CL-RCD-RP-RAS)
Device Locator Slot 1
Manufacturer Silicon Technology
Capacity 512 MBytes
Memory Type DDR (PC3200)
Speed 200 MHz
Supported Frequencies 166.7 MHz, 200.0 MHz
Memory Timings 2-3-3-7-0 at 166.7 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Memory Timings 2-3-3-8-0 at 200.0 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Data Width 64 bits
EPP SPD Support No
XMP SPD Support No
Device Locator Slot 2
Manufacturer Silicon Technology
Capacity 512 MBytes
Memory Type DDR (PC3200)
Speed 200 MHz
Supported Frequencies 166.7 MHz, 200.0 MHz
Memory Timings 2-3-3-7-0 at 166.7 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Memory Timings 2-3-3-8-0 at 200.0 MHz, at 2.5 volts (CL-RCD-RP-RAS-RC)
Data Width 64 bits
EPP SPD Support No
XMP SPD Support No
Hope someone can advise me on this.
Cheers.

Sorry for cross-posting to another forum, but this has got me in a twizzle
http://www.windowsbbs.com/pc-hardware/89688-need-ram-recommendations-msi-kt4v-l-2.html#post493343
According to the poster (Post #30), the KT4V-L can support 3gB DDR400.
I looked at the MB in my PC and it is in fact stamped MS-6712 KT4AV v10A (assumed 1.0A ). Both CPU-Z and SIW report it as a MS-6712 v1.0 (BIOS 07.00T 04/02/01, Firmware 101.114)
According to the MSI product webpage, the only difference between the KT4AV and KT4AV_L is that the latter includes an (optional) on-board 10/100 LAN.
http://www.msi.com/product/mb/KT4AV.html#/?div=Detail
The ethernet port on my PC is (as described in Device Manager) is a Via Rhine II Fast Ethernet Adapter, whereas in the listed MSI specifications, the optional 10/100 LAN is stated to be a VIA VT6103 LAN controller. So possibly then I was mistaken in assuming that my MB is a KT4AV-L.
Even so, if the statement about the KT4AV-L supporting 3gB DDR400 is true, surely this also applies to the KT4AV ?
Looking at the available BIOS updates on the MSI page, I can see no mention of an upgrade in DDR400 capacity:
http://www.msi.com/product/mb/KT4AV.html#/?div=BIOS
Edit: Ah, the guy in the post specifically refers to a KT4V-L v1.1 not KT4AV-L and I see that it is different product:
http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html#/?div=Detail
What's confusing is that they all designated as MS-6712. So if anyone, like me, does a look up under MS-6712 they could pull up either version, and since the KT4AV/L and KT4V/L have different BIOS update series, I can see how someone could easily flash the wrong BIOS.
That aside, the memory specifications for the KT4V/L are essentially the same as those in the User Guide that came with my KT4AV:
Supports up to 3GB PC1600/2100/2700/3200* DDR SDRAMs
*See Glossary for recommended DDR400 modules - with the largest listed module capacity being 2 x 512MB
So where does this "up to 3GB DDR400 capacity" notion come from. I'd really want to believe it. And if the guy in the PC shop is to be believed, I'd settle for just 2GB.
Edit 2: Oh, boy, so there is a separate product listing for the KT4V-L v1.1:
http://us.msi.com/product/mb/KT4V-L--v1-1-.html#/?div=Detail
Yet, the memory specifications appear to be the same as those for the other MS-6712 versions and BIOS updates are the same as those for the KT4AV-L (very confusing). In fact the downloadable User Guide is the same - 'KT4AV MS-6712 (v1.X) ATX Motherboard'.
Am I missing something here?

Mom does not see my iChat video, but I see her, and my wife can see mine

When I iChat with Mom, I can see her, but she cannot see my iChat video. All she sees is herself as if she is still in iChat preview mode. Audio works fine. It is like a 1-way video chat with a 2-way audio chat, only we did not request this mode.
This was working for years (from when Mac OS X Panther first offered iChat video chats). Mom only seeing herself is a fairly new situation, but I can not pin down when it started, or what might have triggered it.
My wife can connect with my Mom, and again, my Mom's display stays in preview mode, but my wife can see my Mom, same as I see, only my wife is using her own MacBook Pro.
When I'm at Mom's using my MacBook, I can iChat with my wife. She can see me and I can see her. My wife and I can also successfully iChat video chat when she is away on business trips using the hotel's WiFi. I do not think it is my MacBook, nor my wife's MacBook Pro.
And also while at Mom's with my laptop right next to Mom's iMac G4 using a Bonjour local connection, I see what Mom is sending, but she stays in preview mode only seeing herself.
So I think I've eliminated the internet as a whole, and I've eliminated my MacBook as being the cause.
I really think it is Mom's iMac G4.
I've tried trashing all the iChat related .plist files, but I could have missed something.
Mom's Connection Doctor says it is getting stuff from me at between 13 and 15 frames/second, but all that is shown is her own iSight image.
Some configuration details:
o Mom's 1.25GHz G4 PowerPC iMac is Mac OS X Tiger (10.4.11) all the latest updates.
o Mom uses the original firewire iSight.
o While I think I've eliminated the router, it is an 802.11n Airport Extreme (single transmitter in 802.11b/g/n 2.4GHz mode, channel 1).
o Verizon DSL connection that has worked just fine in the past, beside same situation occurs when I'm sitting next to Mom using a Bonjour connection.
o Mom is 300 miles away, so I can not just drop in. However, I do have VNC access to Mom's system over an ssh tunnel.
o Firewall is Off
o My 2GHz intel Core 2 Duo white MacBook is Mac OS X Leopard (10.5.8) all the latest updates (w/build-in iSight camera).
o My wife has an intel 2.2GHz Core 2 Duo MacBook Pro running Mac OS X Leopard (10.5.8) all the latest updates (w/build-in iSight camera).
o My router is also an 802.11n Airport Extreme (single transmitter in 802.11n 5GHz only mode), with an older flying saucer Airport Extreme 802.11g in bridge mode to support older Macs and iPod Touchs.
o My broadband is also a Verizon DSL connection.
o Firewall is Off.
Events that have happened recently. I'm not saying they are the cause, but generally things that did work do not stop working for no reason at all.
o I've applied Apple's Software Updates.
o I've experimented with TeamViewer.com as an alternative to VNC for remote control (this did not involve video, but it was something new to the mix). NOTE: I DO NOT keep TeamViewer running. I find my VNC via OSXvnc to be satisfactory.
o My nephew moved back in with his Mom (my sister) and his Dad, which is where my Mom happens to live. However, my nephew has his own 12" G4 PowerBook, so he does not need to mess with Mom's. But then again, years ago, I found my Mom's previous Bondi Blue iMac had its web server enabed after a visit from my nephew. Of course now he is a college gradate and much more responsible. Oh yea my nephew was a College Quarterback for a Top Ten College, and I'm a bookworm type. I am not going to accuse my nephew of doing something to his grandmother's iMac unless I have absolute proof
o At one time I had the Chax plug-in installed on Mom's iMac G4. I used Chax to uninstall itself.
I'm stumped. I've tried all the problem isolation things I could think of, as well as the tried and true "Delete the .plist" trick (assuming I found the right .plist(s)).
Has anyone actually lived through this, solve it for someone else, other.

I would do the Latest Combo Installer for the OS level she is at.
That is going to have to wait until after Thanksgiving.
While I'm confident that applying/re-applying the latest Combo Update will not cause any problems, if anything goes wrong (and I know Murphy personally), I will not be able to drive the 300 miles to Mom's house until the weekend following the Thanksgiving weekend.
If I'm going to try doing something like this remotely, I'm not going to do it unless I can get in the car and be a Mom's house the next morning to clean up any mess I create.
So I will put your idea in my "To Do" list (I'll even create a Google Calendar event), to try this 4-Dec-2009.
Thank you for the idea. If I have not found a solution before the 4th, I will install the Combo update.
But I do have a question. Why would Mom's iChat display the video preview window showing what her iSight camera sees, if she was unable to display the remote video stream, just because there was a ColorSpace issue. Hay, I write software for a living, so I know that the left hand does not need to know what the right hand is doing, not the big toe, the elbow, an ear, etc... Software is full of paradoxes. But I figured I would just ask.
And I'm still going to give the Combo update a try on 4-Dec-2009.
But in the mean time. Other suggestions would be appreciated.
Does anyone have a laundry list of .plist files I should try deleting? I did try deleting some obvious ones, but maybe I missed something important, or maybe there is one that does not say iChat, but is just as important.
You never know, if I get enough ideas (tons of ideas), and they all still fail, and I'm frustrated beyond belief, maybe I'll break down and get Mom a nice 27" iMac for Christmas! But if I do that, I'm getting one for me first

Not able to install live update with vista 64bit

I got a MSI P45 NEO-F board with Intel 2 duo E8400 processor, and VISTA 64bit.
I'm not able to make the live update work, the CD-ROM following the card does support vista, but not the 64bit version. After having tried updating everything else to make my computer stop crashing when playing Age of Conan, I would like to see if an update of the bios will help. I would rather use the MSI updater than do it my self, as I don't want to take the extra risk.
I've checked core temperature, RAM temperature, memory leak seems not to be the issue either, and I got the last driver for my videocard (v8.9 for Radeon HD 4870 512MB). At any given time the sound loops, picture may freeze and pixel or just go to brown stripes, and I then need to force a reboot. Some times the system has BSODed by itself as well.
Current BIOS is v1.1, I think there is a v1.5 now.
Is there a live update supporting vista64? Or a receipt for dummies how to do it manually? The AMI BIOS Flash procedure following one of the BIOS-versions that I *think* I can use doesn't include an explanation for vista.

Quote
2x2GB DDR2 RAM CL5 Dimm's (Corsair TWIN2X)
Can you provide a link to the Corsair Datasheet or post the full model/serial number?
Quote
Intel 2 duo E8400 processor
Is that an E8400 C0 or an E8400 E0?
E8400, C0 --> sSpec# = SLAPL
E8400, E0 --> sSpec# = SLB9J
You can find the sSpec number here:
Have you tested your memory with memtest86+? If not, please do that and make sure the each of the 10 individual tests runs at least once.

SAP HANA XS and SAPUI5 - how to live update a chart?

Hi all,
we are developing with SAP HANA Developer Edition and SAPUI5.
We read data with an XSJS File out of the Database ( i read the recent 40 datasets of the table with an SQL statement and LIMIT).
This is the code in my controller.js which calls the XSJS service that reads the data out of HANA DB.
loadChart: function() {
        var model = new sap.ui.model.json.JSONModel();
        var aUrl = '../../../dev/data_HANAXS/services/readdata.xsjs?cmd=loadChart';
        jQuery.ajax({
            url: aUrl,
            method: 'GET',
            dataType: 'json',
            success: function(data) {
                model.setData({modelData : data});
        return model;
Then in my view.js i set the model for the line chart and i can see my data.
var model = oController.loadChart();
linechart.setModel(model);
What i want to do now is to live update the chart in regular time intervals, i am using SETINTERVAL ( you can also use jQuery.sap.delayedCall ) for that:
function updateChart() {
            var model = oController.loadChart();
            linechart.setModel(model);
setInterval(updateChart, 5000); // every 5 seconds refresh the chart
And this works fine BUT the COMPLETE CHART (including x-axis and y-axis) is drawn again every 5 seconds , what i want to know is how can i realize it so that ONLY the DATA LINE is drawn again every 5 seconds?
It would be great if anyone could help me regarding this issue?
It must be possible to do a live update of a chart especially for cases where you get steadily new data that has to be visualized.
Regards & Thanks,
Andreas

Hi Micha,
yes i tried that some days before but it did not work. After your message here, i tried it again but same result, what i get after some seconds is "No Data". Moreover i am not quite sure how to set the data with model.setData().
What i do is the following, maybe you know if there is a mistake: this is the code for updating the chart in the controller.js:
update: function(oController) {
        var model = new sap.ui.model.json.JSONModel();
        var aUrl = '../../../xxxx.xsjs?cmd=loadChart';
        jQuery.ajax({
            url: aUrl,
            method: 'GET',
            dataType: 'json',
            success: function(data) {
                model.setData({modelData : data});
                oController.onUpdateCall(model, oController);
onUpdateCall: function (updateJSONModel, oController) {
        oController.updateModel = updateJSONModel;
        var linechart = sap.ui.getCore().byId("linechart");
        var oModel = linechart.getModel();
        var oUpdateData = oController.updateModel.getData();
        oModel.setData(oUpdateData);
I use the same cmd parameter and i call the same xs service method "loadChart" (which always returns the newest datasets - data is continuosly pushed in our HANA DB) that initially loads the data for the chart.
I get no error messages in my browser.
When i do oController.update(oController) in my view.js after 5 seconds, i get "No Data" but analysing the data in browser shows me that the xs service returns the data, so data is definitely there.
Regards & Thanks,
Andreas

Live Update issues? See here.

Similar Messages

Maybe you are looking for