Live Upgrade not working from Solaris 10 05/09 - 10/09

I have a Blade 1000 that used to run SXCE, and I used to LU all of the time. I recently rejumpstarted it back to Solaris 10 05/09 to match production.
Now that 10/09 is out, I went to do a normal LU, however it completely bombs out. I'm assuming it's because of the weird device name, yet I can't figure out what is causing it. Any ideas?
========
= Before =
========
root@dxnpnc05:~ # zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 9.24G 24.0G 54.5K /rpool
rpool/ROOT 2.46G 24.0G 18K legacy
rpool/ROOT/sol10u7 2.46G 24.0G 2.46G /
rpool/appl 18K 24.0G 18K /appl
rpool/export 2.41G 24.0G 18K /export
rpool/export/home 2.41G 24.0G 2.41G /home
rpool/local 1.63M 24.0G 1.63M /usr/local
rpool/opt 279K 24.0G 279K /opt
rpool/perl 23K 24.0G 23K /usr/perl5/site_perl
rpool/pkg 107M 24.0G 107M /usr/pkg
rpool/pkgsrc 263M 24.0G 263M /usr/pkgsrc
rpool/swap 4G 27.4G 545M -
root@dxnpnc05:~ # lustatus
Boot Environment Is Active Active Can Copy
Name Complete Now On Reboot Delete Status
sol10u7 yes yes yes no -
=========
= Creation =
=========
root@dxnpnc05:~ # lucreate -c sol10u7 -n sol10u8
Analyzing system configuration.
Comparing source boot environment <sol10u7> file systems with the file
system(s) you specified for the new boot environment. Determining which
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Updating system configuration files.
Creating configuration for boot environment <sol10u8>.
Source boot environment is <sol10u7>.
Creating boot environment <sol10u8>.
Cloning file systems from boot environment <sol10u7> to create boot environment <sol10u8>.
Creating snapshot for <rpool/ROOT/sol10u7> on <rpool/ROOT/sol10u7@sol10u8>.
Creating clone for <rpool/ROOT/sol10u7@sol10u8> on <rpool/ROOT/sol10u8>.
Setting canmount=noauto for </> in zone <global> on <rpool/ROOT/sol10u8>.
ERROR: cannot open ' ': invalid dataset name
ERROR: cannot mount mount point </.alt.tmp.b-0lg.mnt/opt> device < >
ERROR: failed to mount file system < > on </.alt.tmp.b-0lg.mnt/opt>
ERROR: unmounting partially mounted boot environment file systems
ERROR: cannot mount boot environment by icf file </etc/lu/ICF.2>
ERROR: Unable to mount ABE <sol10u8>
ERROR: Unable to clone the existing file systems from boot environment <sol10u7> to create boot environment <sol10u8>.
ERROR: Cannot make file systems for boot environment <sol10u8>.
======
= After =
======
root@dxnpnc05:~ # zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 9.24G 24.0G 54.5K /rpool
rpool/ROOT 2.46G 24.0G 18K legacy
rpool/ROOT/sol10u7 2.46G 24.0G 2.46G /
rpool/ROOT/sol10u7@sol10u8 68.5K - 2.46G -
rpool/ROOT/sol10u8 110K 24.0G 2.46G legacy
rpool/appl 18K 24.0G 18K /appl
rpool/export 2.41G 24.0G 18K /export
rpool/export/home 2.41G 24.0G 2.41G /home
rpool/local 1.63M 24.0G 1.63M /usr/local
rpool/opt 279K 24.0G 279K /opt
rpool/perl 23K 24.0G 23K /usr/perl5/site_perl
rpool/pkg 107M 24.0G 107M /usr/pkg
rpool/pkgsrc 263M 24.0G 263M /usr/pkgsrc
rpool/swap 4G 27.4G 545M -
root@dxnpnc05:~ # lustatus
Boot Environment Is Active Active Can Copy
Name Complete Now On Reboot Delete Status
sol10u7 yes yes yes no -
sol10u8 no no no yes -
Any ideas? Thanks!

I have been trying to use luupgrade for Solaris10 on Sparc, 05/09 -> 10/09.
lucreate is successful, but luactivate directs me to install 'the rest of the packages' in order to make the BE stable enough to activate. I try to find the packages indicated , but find only "virtual packages" which contain only pkgmap.
I installed upgrade 6 on a spare disk to make sure my u7 installation was not defective, but got similar results.
I got beyond luactivate on x86 a while ago, but had other snags which I left unattended.

Similar Messages

  • Live streaminng not working from Adobe 3.1 Encoder to iOS devices

    We are trying to live stream from Adobe 3.1 encoder(on PC ) to live stream on IOS devices, by broadcasting the stream to Adobe Media Server 5 Professional.However though we succeeded in streaming live to PC, it is not working on IOS devices.Only when we uncheck the Audio option from Encoder, we are able to Live stream to IoS devices, which will be only the video without any audio.When we we have audio option checked as well, it works for PC, but for Iphones/Ipads it flickers once and then gives a error message " Cannot Decode".The current settings on encoder  is as below
    The current process is to use the default HDS links(as per the stream URL) for the PC, and the HLS links for IOS.Any guidance how to get the audio working here on IOS devices will be of great help.
    Note:Online most of the places use AAC format for audio on encoder, is that the only one which can work for IOS devices?

    Yes, AAC is the codec that iOS devices support
    -Karishma

  • MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!

    This topic has been moved to Operating Systems.
    MSI Live Update not working Windows XP Professional 64bit Edition!!!

    Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
    A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
    Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
    http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
    Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I?

  • Exchange mail after iOS 8 upgrade not working

    exchange mail after iOS 8 upgrade not working.
    I can not get email from my exchange account.
    Any suggestion?

    Just had this issue.  I turned WIFI off and it connected fine.  Then turned WIFI back on and working as always.
    It had something to do with the WIFI conflicting with the exchange server.

  • HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.

    HP Pavilion dv6-6181TX
    Product No. A3U49PA
    Genuine Windows 7 Home Premium 64
    (but i upgraded it to windows 7 ultimate)
    System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
    so when i restart my computer and press Esc and then choose F11 i get this message :
    "Windows failed to start. A recent hardware or software change might be the
    cause. To fix the problem:
    1. Insert your Windows installation disc and restart your computer.
    2. Choose your language settings, and then click "Next."
    3. Click "Repair your computer."
    If you do not have this disc, contact your system administrator or computer
    manufacturer for assistance.
    File: \Boot\BCD
    Status: 0xc0000225
    Info: An error occured while attempting to read the boot configuration data."
    i saw this from the forum
    http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
    Had the C partition been split/shrunk to form a new partition previously?
    Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
    If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
    The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
    please help me & Thank you for your time,
    This question was solved.
    View Solution.

    If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
    Older versions of Partiton Wizard Free work: 
    http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Why keyboard and mouse right click not working in Solaris and Linux?

    Hi all,
    I have two problems:
    1) I am working on AWT/Swing application and its working fine in window enviornment,but while running on solaris and linux mouse right-click option window not poping up.
    2) Ctrl+c,Ctrl+v,Home and End keyboard key are not working in solaris and linux OS for same application.
    Pls provide me some solution for these problem.
    -Dinesh

    Hi Nik,
    Thanks for reply. I found some solution for the above problem.
    For mouse right click there was problem in my source code.I have not implemented the mousePressed() method
    In case of keyboard Home, End and arrow key working fine after exporting AWTUSE_TYPE4_PATCH=false; in solaris and linux
    But still Ctrl-c and Ctrl-v not working.
    I am using JDK1.5.0_07+Eclipse IDE 3.1
    -Dinesh

  • Dashboard link is not working from BI Publisher

    Dashboard link is not working from BI Publisher. Please let me know How to fix this problem.

    Please somebody guide me.
    Dashboard link is working fine from the Apps Server Machine. But the link is not working from other machines. Do I need to setup machine.domain:<port_number> any where.
    Thanks,
    Vara

  • My mail is not working from my ipod i looked it up it says it trouble shooting but its not giving me anything to fix it can someone help me?

    My mail is not working from my iPod touch. I looked it up and it says it trouble shooting? But they are not giving me anything to fix it. I restored my iPod touch to see if that worked and it didnt. Can anyone help me?

    Can you access the account from another device?
    Without you telling use the email provider and type of account we can't really help you.

  • The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I'm very computer literate and am pretty sure the problem is on your end.

    The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
    I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?

    Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
    https://wiki.mozilla.org/Mobile/Platforms/Android
    Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
    Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
    (Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

  • File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

    File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
    I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
    Thanks

    I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
    Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
    I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

  • In 5s, personal hot spot does not work from time to time. Not detected

    In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.  

    Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
    also avoid special characters making a password. hashtags or open brackets for example doesn't work too good.

  • File sharing is not working from pc to imac os x 10.9.2

    file sharing is not working from pc to imac os x 10.9.2

    Hello there Karen,
    It sounds like you are having to power cycle your modem to get internet back every single day. We can start by troubleshooting your Airport Express to help isolate the issue. I would first perform a Soft Reset, then test the issue again. If needed as a last resort I would then perform a Hard Reset:
    Soft reset
    Connect the device to power and wait for it to complete its start up process. To learn more about the start up process, please see All about Wi-Fi base station Status Lights (LED).
    Press and hold the reset button with a pen, pencil, or straightened paperclip for 1 full second, then release it. The light (LED) will begin flashing amber, indicating that the device is in soft reset mode.
    From the AirPort menu bar item, choose the network created by the device (the network name does not change).
    Open AirPort Utility from Applications > Utilities.
    Select the base station, then click Edit (The Edit window will indicate that the base station is in Soft Reset mode).
    Move through the tabs to make changes to your passwords or other settings as needed, and click Update and Continue as required
    Quit AirPort Utility.
    Hard reset
    Press and hold the reset button with a pen, pencil, or straightened paperclip until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
    Release the button and the device will reset.
    Wait about a minute for the base station to finish restarting, then open AirPort Utility from Applications > Utilities.
    Select the base station from Other Wi-Fi Devices, then click Edit.
    Select the Other Options button.
    Select "Restore previous settings" and click Next until you get to the final window.
    AirPort Utility will indicate that Setup is complete. Click Done.
    Quit AirPort Utility.
    Resetting an AirPort base station FAQ
    http://support.apple.com/kb/ht3728
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Oracle Reports Team Please Help..! Arabic Reports PDF not working in Solaris

    Hi,
    I am not able to Generate Arabic PDF reports (HTMLCSS is working fine with me.....)
    O/s is Solaris........O/s supports Arabic....
    NLS_LANG is set to "ARABIC_EGYPT.AR8ISO8859P6"
    In place of arabic content its showing Junk characters..... In win2k Its working fine........ I have checked my uifont.ali I am giving my PDF section details..
    [ PDF:Embed ]
    helvetica = "helvetica.afm helvetica.pfa"
    [ PDF:Subset ]
    Arial = "Arial.ttf"
    helvetica = "Arial.ttf"
    "Andale Duospace WT J" = "Aduoj.ttf"
    "Albany WT J"="AlbanWTJ.ttf"
    "MS UI Gothic" = "msgothic.ttc"
    And i have Included the Fonts folder entry in REPORTS_PATH variable entries...Is there any thing needs to be done.....??????
    Why its not working in Solaris........PLEASE HELP ME OUT...........!!!!!
    Thanks in Advance........
    sharat ([email protected])

    Hi Sharat
    I see that you have two entries for helvetica font in your uifont.ali. Be aware that order of precedence is alias->embed->subset. If the helvetica part is appearing junk, try and comment out the entry in embed section and let the subsetting happen.
    On Solaris, ensure that the case of font file names match.
    Regards
    Sripathy

  • D-Link 562M modem does not works in Solaris 10 (?)

    I use D-Link 562M external USB 56K modem. Modem works in Windows but does not works in Solaris 10 (?). Help me!

    pat.gibbons wrote:
    Not supported yet but will be in a future Solaris Express release.Many USB modems are not really modems but the entire signal processing is done by the host computer. Such "winmodems" require signal processing software which is quite complex. I do not think that such modems are supported in the following versions of Solaris.
    If the 562M is NOT such a modem (but a "real" one) it should be quite easy to adapt a driver to work with this modem.
    Martin

  • Swedish chars ��� not working under Solaris

    Hi All,
    I created the following little code and it is not working under Solaris 7, JDK1.4.1_01. (also tested some other but does not work)
    public class HelloSweden
    public static void main(String [] args)
    String newName="���";
    String charsetName = "iso-8859-2";
    byte [] s = {(byte)229, (byte)228, (byte)246};
    try
    newName = new String(s, 0, s.length, charsetName);
    catch ( java.io.UnsupportedEncodingException e )
    System.err.println(e.getMessage());
    e.printStackTrace();
    System.out.println("new name is: "+newName);
    for(int i=0; i<newName.getBytes().length; i++)
    System.out.println(i+"."+":"+newName.getBytes());
    The problem is that on Solaris 7 the output is:
    new name is: ???
    0.:63
    1.:63
    2.:63
    Whereas on Linux it works fine:
    new name is: ���
    0.:-27
    1.:-28
    2.:-10
    I also tried the "javac -encoding iso8859-1" option but no use.
    Could anybody help?
    Thnx,
    GF

    I also tried the "javac -encoding iso8859-1" option
    but no use.
    Was the output exactly the same or were the numbers correct, at least?
    You may need to compile with:
    javac -encoding ISO-8859-1 ClassName.java
    and then run with:
    java -Dfile.encoding=ISO-8859-1 ClassName
    You can set the character encoding explicitely like that. The character encoding depends on locale settings; if you set LC_ALL to a Swedish locale ("sv_SE"?) javac and java should start using the correct encodings automatically.

Maybe you are looking for