Live Upgrade with Zones - still not working ?

Hi Guys,
I'm trying to do LiveUpdate from Solaris update 3 to update 4 with non-global zone installed. It's driving me crazy now.
I did everything as described in documentation, installed SUNWlucfg and supposedly updated SUNWluu and SUNWlur (supposedly because they are exactly the same as were in update 3) both from packages and with script from update 4 DVD, installed all patches mentioned in 72099, but lucreate process still complains about missing patches and I've checked if they're installed five times. They are. It doesn't even allow to create second BE. Once I detached Zone - everything went smooth, but I had an impression that Live Upgrade with Zones will work in Update 4.
It did create second BE before SUNWlucfg was installed, but failed on update stage with exactly the same message - install patches according to 72099. After installation of SUNWlucfg Live Upgrade process fails instantly, that's a real progress, must admit.
Is it still "mission impossible" to Live Upgrade with non-global zones installed ? Or am I missed something ?
Any ideas or success stories are greatly appreciated. Thanks.

I upgraded from u3 to u5.
The upgrade went fine, the zones boot up but there are problems.
sshd doesn't work
svsc -vx prints out this.
svc:/network/rpc/gss:default (Generic Security Service)
State: uninitialized since Fri Apr 18 09:54:33 2008
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: man -M /usr/share/man -s 1M gssd
Impact: 8 dependent services are not running:
svc:/network/nfs/client:default
svc:/system/filesystem/autofs:default
svc:/system/system-log:default
svc:/milestone/multi-user:default
svc:/system/webconsole:console
svc:/milestone/multi-user-server:default
svc:/network/smtp:sendmail
svc:/network/ssh:default
svc:/network/inetd:default (inetd)
State: maintenance since Fri Apr 18 09:54:41 2008
Reason: Restarting too quickly.
See: http://sun.com/msg/SMF-8000-L5
See: man -M /usr/share/man -s 1M inetd
See: /var/svc/log/network-inetd:default.log
Impact: This service is not running.
It seems as thought the container is not upgraded.
more /etc/release in the container shows this
Solaris 10 11/06 s10s_u3wos_10 SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 14 November 2006
How do I get it to fix the inetd service?

Similar Messages

  • Resolution in Live Meeting with Global Client not working since new laptop purchased- SONY VAIO

    Live Meeting

    To be honest, you should have received it upon purchase. You should have no issues returning to get it added on.
    Crystal
    Superuser
    Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
    *Remember to mark your questions solved and click the star to give kudos to show your thanks!*
    While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
    My opinions do not in any way shape or form represent Best Buy's Official decisions.

  • Live upgrade with zones

    Hi,
    While trying to create a new be environment in solaris 10 update 6 i 'm getting following errors for my zone
    Updating compare databases on boot environment <zfsBE>.
    Making boot environment <zfsBE> bootable.
    ERROR: unable to mount zones:
    zoneadm: zone 'OTM1_wa_lab': "/usr/lib/fs/lofs/mount -o ro /.alt.tmp.b-AKc.mnt/swdump /zones/app/OTM1_wa_lab-zfsBE/lu/a/swdump" failed with exit code 33
    zoneadm: zone 'OTM1_wa_lab': call to zoneadmd failed
    ERROR: unable to mount zone <OTM1_wa_lab> in </.alt.tmp.b-AKc.mnt>
    ERROR: unmounting partially mounted boot environment file systems
    ERROR: cannot mount boot environment by icf file </etc/lu/ICF.1>
    ERROR: Unable to remount ABE <zfsBE>: cannot make ABE bootable
    ERROR: no boot environment is mounted on root device <rootpool/ROOT/zfsBE>
    Making the ABE <zfsBE> bootable FAILED.
    Although my zone is running fine
    zoneadm -z OTM1_wa_lab list -v
    ID NAME STATUS PATH BRAND IP
    3 OTM1_wa_lab running /zones/app/OTM1_wa_lab native shared
    Does any body know what could be the reason for this ?

    http://opensolaris.org/jive/thread.jspa?messageID=322728

  • IPhone 4, 16 GB. After upgrading to iOS 7, despite having 10 GB free, the phone says No storage available. Tried a soft reset, tried restore as well. Still not working. iCloud is switched off.

    My wife has an iPhone 4, 16 GB. After upgrading to iOS 7, despite having 10 GB free, the phone says No storage available. Tried a soft reset, tried restore as well. Still not working. iCloud is switched off.
    Please help.. This has become a pain.. and of course theres no way to go back to iOS 6.

    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Then... Restore as New (not backup) and Re-Sync your Content.
    Restoring  >  http://support.apple.com/kb/HT1414
    SYNCING with iTunes >  http://support.apple.com/kb/HT1386

  • My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

    My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

    Hello Kierasully,
    I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/en-us/ts2570
    Regards,
    -Norm G. 

  • TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.

    'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.  I have even done a repair to see if that works and it has not.  Has anyone else found a new way to get it working?

    Try Troubleshooting issues with iTunes for Windows updates.
    tt2

  • My ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working. i have a a windows PC please help thanks

    my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
    ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanks

    Are you attempting to sync music from your iTunes Music Library on your PC?
    What options do you have set on the Music Tab for your iPad in iTunes?
    What happens when you sync?
    Any error messages?

  • Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

    Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • TS1702 I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!

    I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
    Kindly note also that i did not work on this iphone before, i just turned it on and i cannot connect it to the itune and restore it as the itune cannot read the device since i'm not able to reach my home screen, I am stuck in my restoring screen.
    Please help!!!!

    You dont have any data on your phone yet right?
    If you dont connect your device to the computer and
    Press and hold the Sleep/Wake button and the Home button together for at least 15 seconds, until the Apple logo appears.
    after that click okay when it says itunes has detected an iphone in recovery mode. Then click restore
    after that try again

  • Many of the times my Iphone 5s shows "No Service" in the specific network area, but if the same sim card is used with other mobiles in the same network area, it shows good network.. i did restore but still not working.. please help me..

    My Iphone 5s shows "No Service" in the specific network area, but if the same sim card is used with other mobiles in the same network area, it shows good network.. i did restore,change sim card, reset all the settings but still not working... please help me..

    Please do not double post a subject. Iphone 5S  I answered your other thread.

  • HT3226 Having problems with my mouse. Cannot scroll up or down or sideways. Did all the cleaning but still not working. Any help on this??

    Having problems with my mouse. Cannot scroll up or down or sideways. Did all the cleaning but still not working. Any help on this??

    Hello:
    Try resetting the PRAM and SMC.
    Barry

  • Hi, when the itunes finished the downloading for ios 6 , the iphone turned of and shows that i have to connect it with the itunes , i already did but still not working . please appreciate your help

    Hi, when the itunes finished the downloading for ios 6 , the iphone turned of and shows that i have to connect it with the itunes , i already did but still not working . please appreciate your help

    First make sue you are installing the 64 bit version of iTunes.
    Second make sure it is iTunes 10.7 or later.
    I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
    Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • What's with Tracked Packet & Paypal Labels - still not working properly?

    This is probably an old refrain, but honestly, how many months/years has it been since Tracked Packet was added to Paypal labelling, and it seems it's still not working 100% correctly.  Case in point: I rarely use TP, but when I tried to change my listing's shipping type from Small Packet to TP yesterday while preparing a label, I got an error message saying the information was incorrect and I couldn't complete the process with TP.  I used the back button, tried inputting the details again, still no go.  Finally, I decided to back out completely, return to the Paypal transaction page and start all over.  This time I was able to get the label done.  So it seems that if any other shipping type is input first, you can't change your mind and switch to TP during the process. This has never been a problem with Expedited Parcel or with Xpresspost -- you can input the details, check pricing, then return and change the shipping type as many times as desired.  I'm wondering if the problem is me and/or my browser (again??), or does anyone else experience this annoying glitch?  BTW, Tracked Packet is an air service, right?  If not, I may be in trouble.  I ask this because I see the estimated delivery time is from 4 to 15 days -- quite a spread for TP U.S.A.

    Tracked Packet has always done the error since it was introduced. If another shipping option is used when you go to PayPal shipping from eBay, switching to Tracked Packet does not reset the form from the service that you came into. You cannot see anything but the form has not been reset. To get around this is simple.  You need to reset the form. A trick to do this is to go to the Service Type entry box, select "Select Type" as the service and click "Continue" at the bottom of the page. This will generate an error message at the top saying to "Please enter a valid service type."  This resets the form to the starter defaults and now you can select the Tracked Packet service. All the information that was entered will not be lost. I posted this solution way back when this "glitch" was first mentioned years ago when Tracked Packet was introduced. It was sent to kalvin at the time but he left eBay and it was never fixed. It is hard to get things fixed on eBay.ca Canada but it seems impossible to get anything fixed on PayPal shipping for Canada Post shipping issues.

  • My Siri and microphone in other apps hasn't been working lately. I've cleaned the mics, took off te case, and it's still not working. My camera only picks up audio when it's off of vibrate. And now I can't answer texts with the new pull down thing.

    My Siri and microphone in other apps hasn't been working lately. I've cleaned the mics, took off te case, and it's still not working. My camera only picks up audio when it's off of vibrate. And now I can't answer texts with the new pull down thing. please help

    Hello Sarahd200037,
    Thanks for using Apple Support Communities.
    To troubleshoot the microphone on your iPhone please follow the steps in the article linked to below.
    iPhone: Microphone issues
    Take care,
    Alex H.

Maybe you are looking for

  • HT204053 how do I associate two Apple id's to one iCloud account?

    How do I associate two Apple id's to one iCloud account?

  • N8: Getting Really Sick of Music Player and Photo ...

    Both Music Player and the Photo Gallery look at the entire device - main memory, mass memory, SD card, everything. This is an ENORMOUS pain. Is there some way I can change this, even if it means using 3rd party software? 1. Music player looks at all

  • Mac Book Pro rebooting automatically

    I just installed the latest update from Apple and now my machine is just restarting and rebooting automatically. I cleaned out any dust, reset in safe mode but still rebooting.

  • Convert VI Block Diagram to snippet/Image Online

    I see many people in the Forum mainly who contribute a lot sometime use Mobile phone to reply to the queries and trying to solve problems ( Example ). But when a vi is posted its not possible for them to view that so if there is any plugin in the NI

  • Active tab page and tab

    I would like to know how to make active tab page stands out from other tab pages. For example, tab page background color and tab background color in light gray. Tab text in white. Any ideas? Thanks in advance for any suggestions.