Live video image only shows Quicktime logo

I was watching a live stream on uStream then after a minute it changed to the Quick Time logo. I tried to reload the stream but it still showed the Quicktime logo. How do I fix this?

i have the EXACT same problem. Whenever i add new files and try to play them the clicking noise is LOUD and it does not stop for a good 10 seconds nad my IPOD begins to shake...
i would like to know the answer as well

Similar Messages

  • 80g video ipod only shows apple logo and makes loud clicking noises

    I've had my ipod 80g for a little over two years, with few incidents, and it's about 50 g full. When I most recently connected it to my computer, it started making these loud whirring and clicking noises and the apple logo is all that shows. I know the ipods can't be expected to last more than a few years (or so I'm told) so my question is what to do. Should I take it into the apple store and have the hard drive totally wiped of all my music, should I try some alternative fix (this strange business card opening the ipod technique, for instance?), or is there something else I should try? Is an ipod in this stage even salvagable? Thanks!

    i have the EXACT same problem. Whenever i add new files and try to play them the clicking noise is LOUD and it does not stop for a good 10 seconds nad my IPOD begins to shake...
    i would like to know the answer as well

  • IPod: when I turn it on my ipod only show Apple logo

    hello I really new in this forums but I don't be too sure if here is the correct forums to post my question.
    I have a 30GB video iPod, when I turn it on my ipod only show Apple logo, what can I do to fix this problem.
      Windows XP  

    Try this link for computer not recongizing your ipod
    http://docs.info.apple.com/article.html?artnum=61711

  • My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • AppleTV 3 only showing Apple logo when connected to very new Panasonic plasma - worked Ok with older Panasonic (2007)

    AppleTV 3 only showing Apple logo when connected to very new Panasonic plasma - worked Ok with older Panasonic (2007) - have reset AppleTV, tried 3 HDMI cables.

    Tried again as you suggested - no luck. Ref sequence below
    A. Pressed menu & down to reset Apple TV
    B after reset & restart pressed menu & up buttons to change resolution. After pressing both buttons for 6 sec, LED starts flashing - released both buttons. TV screen blank. After 20 to 30 sec horizontal lines came on screen remained for 20 sec then screen again went blank. Waited for couple minutes. LED still flashing - pressed Menu button for 2/3 sec  - flashing stopped & LED glows continuously. Screen blank
    C. Reset the unit again by pressing menu & down. When it restarted - while LED was still flashing, got orange color screen with Apple logo in the middle. This screen remained till LED stopped flashing & then screen went blank

  • Photos in album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

    Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • HT1551 my apple tv is only showing apple logo and the white light keeps flashing what do i do

    my apple tv is only showing apple logo and the white light keep on flashing can anyone help

    You have to restore the device using iTunes
    Apple TV (2nd generation): Restoring your Apple TV
    support.apple.com/kb/HT4367
    You need a micro-usb cable and the ATV must be in DFU mode (Hold down the menu and play button for 7secs)
    Apple TV (1st generation): How to perform a factory restore
    support.apple.com/kb/HT3199 

  • Iphone seems to be working but only shows apple logo, itunes sees the phone normally, when i restored it appeared successful and itunes tried activating my phone but the screen only shows apple logo nothing else???

    my iphone is detected in itunes as normal, but screen on the phone only shows apple logo??? restored and everything but no difference its weird, it restores successfully and stuff but once done the screen only shows apple logo.. note:while restoring everything goes through as normal on the phone it shows the bar loading etc.. but once complete just stays on apple logo.

    It can take a few minutes to reinitialize, but if it stays on the Apple logo for as much as 10 minutes there is something seriously wrong. Try restoring again, and set up as a new phone rather than installing your backup. If this fixes it you have a corrupt backup. If this doesn't fix it the phone is broken. Or possibly jailbroken.

  • Google images only showing first page. Any solutions yet?

    Hi
    I've recently come across this problem of Google images only showing the first page of images with the rest being blank grey boxes.
    After trawling the web for days it seems this has been an ongoing problem for many for several months now but I haven't seen any solutions that have worked for me.
    I've cleared the cache and temp files, I've un-checked 'disable or replace context menus' on firefox etc.
    It seems to run ok on ie8 but I prefer to use Firefox if at all possible.
    Is there a solution out there?
    I am on XP Pro sp3 using FF 3.6.11

    This was happening to me (only getting one page of images after a search.) I disabled the AdBlock Plus ad-on and the problem was solved.

  • How can i fix white display only shows apple logo ond loading symbol

    How can i fix white display only shows apple logo ond loading symbol! Pls help me guys!

    shutdown your mac by holding power button. Then Hold CMD+V and press power button now it will start to show some text wait for few minutes and somewhere it will stop post that screenshot

  • Ipad frozen only shows apple logo then tells me to ask support

    will not switch on only shows apple logo then ask support

    will not switch on only shows apple logo then ask support

  • My iphone only show apple logo

    my iphone only show apple logo ,, is any one know what happen and what i do

    Hi omar makram,
    Thanks for visiting Apple Support Communities.
    If your iPhone is only starting up to the Apple logo, see the advice in this article:
    iOS: Not responding or does not turn on
    These steps can help return your iPhone to working order.
    All the best,
    Jeremy

  • , The screen shows quicktime logo and despite pressing done it is not reverting back

    My Itunes app is stuck on my phone after accessing a podacast. i am unable to get out of it. The screen shows quicktime logo and despite pressing on the done button nothing happens. I can close the Itunes app, but the minute I access it get the same podcast menu.

    Place the device in DFU mode then restore it.

  • New video clips only show bottom half of frame

    Video clips shot with my new video camera only show the bottom half of the frame in Premiere Elements 3.0.  Older video clips show up just fine.

    goshawk28776
    You say that this 1/2 video display is related to video from your new camera and Premiere Elements 3.
    The problem of the 1/2 video display has been associated specifically with .wmv format and a recent Windows Update kb file.
    But, I would ask, just whar brand/model camera do you have that is shooting .wmv video?
    By the way, what computer operating system are you running Premiere Elements 3 on....Windows 7 32 or 64 bit or Windows XP 32 bit?
    The Announcement that we have post at the top of this forum is as follows:
    Announcement: Windows Update Causes Half of Display to Be Blacked Out
    Hide Details
    MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
    "MS bulliten MS13-057.  Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
    For us, it occurs when decoding WMV9 files.  Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
    You can uninstall these windows updates to resolve your problem."
    There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
    Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
    This notice suggests deleting Windows Update kb 2834904 for Windows XP, and Windows Update kb 2803821 for Windows 7. So, please let us know your situation and whether any of this applies to you and whether your problem was solved by taking one of these actions.
    Thank you.
    ATR

  • I have forgotten my security answer,also my ipod not starting only showing apple logo.

    i have forgotten my security answer,also my ipod not starting only showing apple logo.
    <E-mail Edited by Host>

    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Use the Express lane and start here:
    https://expresslane.apple.com
    then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
    or
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    or           
    Apple ID: Contacting Apple for help with Apple ID account security
    3 - Use your rescue email address if you set one up
    Rescue email address and how to reset Apple ID security questions
    For general  information see:
    Apple ID: All about Apple ID security questions
    For iPod problem
    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

Maybe you are looking for

  • Issue after rebuild of java file

    Hi, I am using the JDEV11.1.2 and i migrated the source from JDEV11.1.1.5. If i do any changes and rebuild it then am trying to proceed further in the applicaion means am getting the below error along with inactive message. oracle.adf.controller.inte

  • Mail Server suddenly stopped working

    My mail server has stopped working, and I can't figure out why. This is a brand new MacMini with the latest Maverics Server (preinstalled) that I just setup last month. (We migrated from an Xserve running 10.6.) Up to this point, mail has worked flaw

  • I have an ipod touch 4th gen. charged twice battery went dead now will not charge or power on. what can I do?

    I have had my 4th gen ipod touch for over a yr. But I've only charged it twice now it wont charge or power up. I have had ppl try resetting it. But no change. Is there something I can do to fix it?

  • Naming cell or group of cells

    Is there any way to assign a user defined name to a cell or group of adjacent cells? Much like the naming functionality in Excel. I want to refer to the named cell across sheets and workbooks.

  • Iprocurement, istore , ipayment, configurator

    Hi , What efforts/Learning are required from APPS DBA perspective about the i-modules in EBS. Any Links or documentation will be helpful. Please also tell me about the log files of i-module in R12.1.3 . In 11i I gernally used to serach Jserv and jvm