LIVE VIDEO USING MULTIPLE CAMERA

iam trying live video streaming using Flash lite + FMS3 +
Flash Media Encoder
if i use multiple camera how to switch it..?

Almost every frame grabber displays live images on the screen. I use the
falcon board and control it by it's dll. I give it a handle to a window
by LV to show it there. The DLL supports me with a pointer to the pixel
data as well does IMAQ vision. That's all I need to move a frame into an
IMAQ picture for further processing.
Detlef
Paul schrieb:
> Does someone know how i can watch a live image from my camera in
> labview ? i have imaq, but i don't know if i would be easier using an
> active x component.
> thanxs
>
> --
> [email protected]
>
> Sent via Deja.com http://www.deja.com/
> Before you buy.

Similar Messages

Is it possible to stream live video from a camera to an iPad3 via bluetooth or a cable?

Is it possible to stream live video from a camera to an iPad3 via bluetooth or a cable?
I want to use my iPad as a screen for a reversing camera in my van and want to know if this is possible. do i need a bluetooth camera and is there a specific one that will connect to the iPad? Or is there any form of adaptor that I can plug the camera straight into the iPad?
Any ideas?

no
only "live" thing one can do is to airplay mirror the screen of a ios device or a newer mac with mtn lion

Streaming 2 x H264 live videos using smil file?

Hi,
I want to be able to stream a live video using Flash Media Live Encoder 3 using two options of 300 kbps and 150 kbps.
I want to give users a choice of stream quality depending on their available bandwidth to maintain the live feed.
I have set it up so that the Bit Rates are 300 and 150 and tick marks on: 1 and 2
my FMS URL is correct
The stream names are test1 and test2
in the Stream: box I have written: test1;test2
Yet I have also tried : mp4:test1.f4v;mp4:test2.f4v and other combinations.....
The SMIL file has the following:
<smil>
    <head>
        <meta base="rtmp://live" />
    </head>
    <body>
    <switch>
          <video src="mp4:test1.f4v" system-bitrate="150000"/>
          <video src="mp4:test2.f4v" system-bitrate="300000"/>
    </switch>
    </body>
</smil>
The SMIL file is in the same root level as the web page.
It does not work, I have tested this with prerecorded videos and it works fine, so I thought it should work with 2 live streams also.
I believe one of the issues might be the Stream: test1;test2
in Flash Media Live Encoder 3?
Second related questions:
Also using Dreamweaver CS5 what is the correct setting to stream an FLV with h264?
I also tried mp4:test1.f4v in the stream name but it comes back with anerror that the name is wrong.
any solutions to what I am doing wrong would be appreciated

Thanks for the response.
With respect to the second query I had, I do understand that FLV does not support H264, I just used the term FLV to mention it was a flash video I was refering to rather tahn the codec used.
The first part, I did actually try that option previously, but it still returned an error of "Cannot Connect".
I used the code generated by the FMS dynamic video page to create the video object.
I simply changed it in Dreamweaver to: ( Bold text are my edits to the original. ) The original generated vod instead of live.
<object width='640' height='377' id='videoPlayer' name='videoPlayer' type='application/x-shockwave-flash' classid='clsid:d27cdb6e-ae6d-11cf-96b8-444553540000' ><param name='movie' value='swfs/videoPlayer.swf' /> <param name='quality' value='high' /> <param name='bgcolor' value='#000000' /> <param name='allowfullscreen' value='true' /> <param name='flashvars' value= '&videoWidth=0&videoHeight=0&dsControl=manual&dsSensitivity=100&serverURL=dynamicStream.s mil&DS_Status=true&streamType=live&autoStart=true&videoWidth=0&videoHeight=0&dsControl=manual&dsSensitivity=100&rtmp://servername/live/test1.f4v&DS_Status=true&streamType=live&autoStart=true&videoWidth=0&videoHeight=0&dsControl=manual &dsSensitivity=100&serverURL=dynamicStream.smil&DS_Status=true&streamType=live&autoStart=true'/><embed src='swfs/videoPlayer.swf' width='640' height='377' id='videoPlayer' quality='high' bgcolor='#000000' name='videoPlayer' allowfullscreen='true' pluginspage='http://www.adobe.com/go/getflashplayer'   flashvars='&videoWidth=0&videoHeight=0&dsControl=manual&dsSensitivity=100&serverURL=dynam icStream.smil&DS_Status=true&streamType=live&autoStart=true&videoWidth=0&videoHeight=0&dsControl=manual&dsSensitivity=100&serverURL=rtmp://servername/live/test1.f4v&DS_Status=true&streamType=live&autoStart=true&videoWidth=0&videoHeight=0&dsControl=manual&dsSensitivity=100&serverURL=dy namicStream.smil&DS_Status=true&streamType=live&autoStart=true' type='application/x-shockwave-flash'> </embed></object>
I think something in this code is causing the connection error.
Regards

HT4437 Transmit live video using AirPlay?

I have a iPhone 4 and iPod and I want to connect them to transmit live video using AirPlay but I dont have it - how do I install Airplay?
Having real problems finding the answer to this question.
Thanks
Roland7

Hi Roland7!
Here is an article that can explain this to you:
iOS: Use AirPlay to wirelessly stream content
http://support.apple.com/kb/ht4437
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Capturing live Video From DV Camera

I Tried to capture a church service using iMovie. I Expected multiple files because of the file size limit and imovie braking up the file. I also assumed that these files butt seamlessly together, but to my surprise they do not. How can i get a hour+ of continues live video recorded?

Please note that I don't believe your camera will put out a proper full-resolution, full-quality HD signal via HDMI while in record mode. DSLR cameras are notorius for not allowing you to fully turn off info overlays on the HDMI output, or even if you can on your particular camera, the output signal is somewhat cropped or otherwise not a proper HD signal.
We're a reseller of the Atomos Ninja portable recorders and this has been a huge issue - DSLR shooters want to use Ninja for the exact purpose you mention, for long, uninterrupted recordings, but the HDMI outputs from those cameras are just not suitable.
Do this - connect the HDMI out from your camera to an HD display and start recording with the camera. Do you get a perfect, full-screen image without any overlays or any cropping, and at full quality? My understanding is that they all "dumb-down" the output signal in some regard while recording, unlike video cameras that will all put out a perfect HD image. The only 2 DSLRs that I'm aware of with "clean" output are the Panasonic Lumix GH2, and the new Nikon D4.
As mentioned, even if a DSLR camera will put out a good image, you will need a "capture device" with HDMI input such as BMD Intensity or Matrox MXO2 Mini connected to Mac or PC.
Thanks
Jeff Pulera
Safe Harbor Computers

Video import, multiple camera - drifts out of sync

Hi - I've been using iMovie for years, am now starting with Final Cut Express because I have a project with multiple video tracks. Here's the problem: I've imported video from two cameras that were used simultaneously to record a play. I can sync the two video clips together, but if I sync them at the beginning of the clip, then at the end of the clip they are close to a second apart - they 'drift' progressively further out of sync as the clip goes on.

Sorry, I accidentally submitted the question before I had finished entering it ... here is more info ...
This is NOT an audio/video sync issue, which I have seen reported elsewhere. Each of the clips from the two cameras has its ownaudio track which is in sync with its own video. But both video/audioon the clip from camera 1 drifts out of sync with the video/audio fromcamera 2.
Finally, another (possibly related) issue.In addition to the video from the two cameras, I have an audio trackwhich was recorded on a separate audio recorder. This also drifts outof sync with the video - in fact it is not in sync with EITHER of thetwo imported video tracks.
All the video clips are thesame in terms of frame rate, sample rate etc. The audio track has thesame sample rate as the video clips. The only thing I can think of thatmight be an issue is that while two different MiniDV cameras were usedto record the play, I only had one camera available when it came timeto import - so I imorted the video from both cameras using the samecamera. So the video from camera 1 was imported using camera 1, but thevideo from camera 2 was imported using camera 1 as well.
Any suggestions?? thx

Is it possible to send live video from a camera to (2) Apple TV's?

I'd like to use some sort of consumer camera or even an iPhone camera to send live video to 2 different Apple TVs and have that video displayed on 2 different monitors. The intent is 2 different displays w/Apple TVs located in different rooms in the house to network to a single camera. Is this possible?

no
only "live" thing one can do is to airplay mirror the screen of a ios device or a newer mac with mtn lion

Live video feed from camera and other PC

My Mac Pro is being shipped as we speak. I'm new to this, and not up with all the lingo so please bear with me. I'm hoping you all can help me figure out what I'm trying to accomplish:
I currently VJ (Video Jockey) with certain software on a PC and send that video mix out (DVI or VGA) to a Plasma TV. I just bought a Canon A1 camera and a Mac Pro w/FCP studio. How can I mix the live video feed of the Canon with the video feed from PC (preferably in HD)?
I also want to be able to record and edit the footage from the Canon later.
I was told by the guys at the Apple store that I could do this using FCP multicam. Is that true? I read a couple posts on here that say FCP is just editing software and can't do live feed. Then what is the purpose of multicam? Please help. Thanks-
mac pro Mac OS X (10.4.8) Two 2.66GHz Dual-Core

The Apple people probably didn't understand that you wanted a live mix. FCP can't help you there.
MultiCam is an FCP feature "post-switching" multicamera recordings for that live-to-tape look. It is fairly complex, and especially with only two "cameras" you would be muchn better to start off editing them on the timeline.
As for a live switch you need a video switcher. Outside the realm of FCP, but http://bhphoptovideo.com is a great place to do research.
Then if you're really serious you can record both feeds plus optionally the live switched output for further manipulation in FCP or elsewhere.

Can't capture video using iSight camera in QuickTime 7.4 (92)

OK, I see that there are plenty of "bugs" with Quicktime Version 7.4 (92), but I don't see the problem I am having, posted anywhere. Here goes...
I cannot capture video using my [Firewire] iSight camera on my CoreDuo MacMini. I definitely used to be able to do this. When I go to File>New Movie Recording, I get a back/blank Movie Recording window and that's it. I click on the Red/Record button and nothing happens. The timer doesn't even advance. Just sits there. When I try to stop the recording, I get the following message:
*"Recording failed because no data was received.*
*Make sure that the media input source is turned on and playing."*
I can still capture audio, although had some problems and had to "downgrade" to version 7.3.x and subsequently reinstalled 7.4. Now the audio works but still no video.
A few things:
1. YES, the iSight camera works - I can use it in iMovie, iChat, Photobooth, etc. - for both video and audio.
2. As I mentioned, I tried "downgrading" (using "Pacifist") but still no video.
3. I re-installed Version 7.4 and the audio problems cleared up, but again, still unable to capture video.
3. All software updates installed.
Any ideas???
Thanks!

"As I mentioned, I tried "downgrading" (using "Pacifist") but still no video."
See QuickTimeKirk’s posting in the following thread:
http://discussions.apple.com/thread.jspa?threadID=1357579&tstart=0
Try the following:
Trash com.apple.LaunchServices.plist
It's located in your account:
HD/Library/Preferences/com.apple.LaunchServices.plist
Delete the file, restart (a new .plist will be created) and quicktime hopefully will work again w/o doing an Archive & Install.
+If you want to do an A&I:+
Do an archive and install of your OS from the OS disc. Stop at the QT upgrade you need.
http://docs.info.apple.com/article.html?artnum=301270 Scroll down to "Archive and Install”
IMPORTANT: Maker sure you select "preserve user preferences and data" when you performed the A&I?
Good luck!

IPhone "live" video to multiple AppleTVs?

Is there a way to stream live video that is being recorded from an iPhone to multiple AppleTVs that are all on the same Wi-Fi network?

No.

How to deinterlace live video using flash as a broadcaster?

I am trying to replicate the deinterlace functionality that is available in FMLE in a simple flash broadcaster that is hosted on my website.
I have built a flash broadcaster (using Flash CS4 and AS2) that connects to my FMS server with the aim that people can stream live video to the site. That all works OK; however, I would like to be able to implement a deinterlace option like that which is available in FMLE. Any clues?

go here: http://www.progettosinergia.com/flashvideo/flashvideoblog2005.htm and scroll until you see the blog entry from the 26th of September.
There is no direct link to the post.. But the solution he provdes should do the trick.

Stream live video - use http or rtmp protocols from player code?

I'm trying to stream live video for the first time. I've installed FMIS 3.5 without Apache 2.2. I'm confused on the RTMP/HTTP protocol usage,
I can only have port 80 opened on our FMIS 3.5 box.
1. I've created a new directory under "C:\Program Files\Adobe\Flash Media Server 3.5\applications" called "livedev" as my publishing point.
2. Question:
     Do I need to copy main.asc, Application.xml, allowedHTMLdomains.txt, allowedSWFdomains.txt to this directory as well?
3. Question:
     Using FMLE 3 - FMS URL parameter which protocol do I need to use, does it matter 'http' or 'rtmp'? - http://localhost/livedev or rtmp://localhost/livedev
     Does RMTP use port 80.
4. Question:
     In my Flash Player code. I dragged an instance of FLVPlayback component, what URL do I need for the 'Source' parameter?
     Which protocol do I need to use, does it matter 'http' or 'rtmp'? - "http://localhost/livedev/livestream" or "rtmp://localhost/livedev/livestream"
Thanks,
Dave

A:
2. You don't need to copy main.asc unless you have logic in there that you want on your new application. It's a text file so you can open and read it, get familiar. allowedDomains is up to your security policy, but if you want it to apply to that application then yes. Finally the Application.xml in there is an override of the default one in the server's conf directory - so you only need to include it if you plan on overriding settings from the default.
3. Chosing which type dictates whether or not you're doing HTTP (not streaming) or RTMP (streaming) however you've added a complication that you're only allowed to use port 80 - which RTMP does not by default. FMLE doesn't support HTTP push to FMS, so the FMS URI must be fomr form of RTMP* so you're left with some good choices
Use RTMP over port 80 like so rtmp://myServerName:80/appName/ <- notice the coded port number
Use RTMPT which automatically uses port 80 and will get around most proxies that demand HTTP traffic - however there's more performance overhead than RTMP (think maybe 25% more overhead for a wild guess on my part)
I dunno the answer for your FLVPlayback component but I'm going to take a guess that the issue is about the same here and you should use the same parameter that you're using for your RTMP ingest. At worst I'm pretty sure that it will work and that's not so bad.
Asa

Streaming Live Video using Flash Media Encoder/Flash Media Streaming Server

We currently get a video feed from local cable channel that gets streamed live to our internet website. It gets encoded first on our Windows 2003 server running Windows Media Encoder and then gets published on another Windows 2003 server running Windows Media Services. We are trying to replace these two servers with another solution and the two things driving this project are:
1. These two servers are coming to an end of life cycle so we need to replace the hardware and upgrade the OS.
2. They currently only support Windows compatible file formats. Just like other organizations out there, iPAD users are popping up and they want to view these video streaming from their iPAD.
That's why we are looking at Adobe Flash Media Encoder3 and Flash Media Streaming Server 4.5. My questions for the experts out there are:
1. Can Adobe Flash Media Encoder and Adobe Flash Media Streaming Server can replace our current solution?
2. Do we need both Flash Media Encoder and Flash Media Streaming Server or can Flash Media Streaming Server also can encode video feed?
3. Can Flash Media Encoder and Flash Media Streaming Server can run on the same server?
4. Our Windows Media Services server also has few on-demand publishing points along with a live video streaming. Can above mentioned Adobe products support having live streaming publishing point along with on-demand video publishing points?
5. Does Adobe Flash Media Encoder only support Flash and Quicktime or does it also support .wmv?
I called the sales to find the answers to these questions but he basically read the features listed on the Adobe product website and couldn't really answer these questions.
Any help in find the answers to these questions will be greatly appreciated.
Thanks you.

FYI - I was able to do it by using the "onFI" handler of the embedded NetStream object.
myVideo.addEventListener(fl.video.VideoEvent.STATE_CHANGE, onVideoStateChange);
function onVideoStateChange(evt:fl.video.VideoEvent)
// trace("State = " + evt.state);
if ( evt.state == "playing" )
if (!ns)
ns = myVideo.getVideoPlayer(evt.vp).netStream;
ns.client.onFI = onFIHandler;
function onFIHandler(infoObj:Object):void
var ts:String = infoObj.st;
trace("system time: " + ts);
ExternalInterface.call("updateTimeStamp", ts);

Record video using iSight camera

Hi all, I want to record video using my webcam on Mackbook Pro 17". How can I do that?

Understand that the image quality will not be up to what a consumer DV camera will produce.

I recorded a video using the camera but deleted it by accident, has it gone for good?

I recorded a video on my iPad using the camera and deleted it by accident, have I lost it for good?

Unless your last back up to your computer was after it was taken and before it was deleted then yes, it's gone - there is no trashcan or undelete facility on the iPad. If it was on the iPad when you last backed up then you could try restoring the iPad to the backup and see if that puts it back (you'll need to restore the whole iPad, you can't just restore an individual app)

LIVE VIDEO USING MULTIPLE CAMERA

Similar Messages

Maybe you are looking for