Live!Ware 2.1 Installation prob

I'm looking for Li've!Ware 2.. I'm using Windows 98SE and I have already Li've!Ware 2.0.
I've tried downloading the one from here:
http://imshome.net/tech/drivers/Audio/
But when I attempt to run the Setup program, it won't start at all!
Help me please! I really want it to correct a sound bug in a game!

Search for the badboy thread with all the Cd ISO downloads. I think the oldest one is the Li'veWare 3.0 cd. Li'veWare 2 had loads of problems that were fixed in 3.0. If he doesn't have the cd there, driverguide.com does have the full downloads, probably of 2.0 too, though you're better off with 3.0.
Or, for a really bug fixed WDM version, use the later ISO's and your card'll work better. You'll just lose Dos driver support. If your computer is really old and has less than 500MHz processor and less than 64MB memory then you still need to use the older VXD Li'veWare, so in that case don't bother with the newer stuff.

Similar Messages

SB 5.1 Live Digital Installation Prob

Hello,
i got a little Problem with the Installation of my SB Li've 5. Digital.
I?ve lost my original Driver CD, so i downloaded the two ISO Files from BadBoys Post.
The Serial No. of my card started with 0228 so i downloaded the 2 ISO Files for my 0228 Card.
The Problem is now, when I start the Installation, i got an Info Screen that says.
"No Soundblaster Card have been found" and the Installations quits.
I tried to install the Drivers the manually way but it doesn?t work and the computer getting down with a blue screen.
Did i anything wrong ?
Can someone help me please ?
Thanks
Don Limpio

That?s the Way i tried many Times but no Driver can be installed.
But I think you need the Full CD to install the Card and when you have the Driver installed you can use the Drivers from the Support Donwload Section.
Anyway the single Driver from the Download section don?t work.
Thanks for your reply

SB Live 5.1 Installation Prob

I have a SB Li've 5. card. I purchased it less than a year ago. I purchased a new computer last week and wanted to put the card into the new computer. I can't find the disk that came with the card. I downloaded the driver and tried to install it, and I was told that "Setup could not decect any Sound Blaster Audio card on your system". I tried to run the auto update from this site, and it found my SB Li've 5. card and said that it was fully updated. I tried to search the previous posts but never found an answer. I'm running Windows XP, and I have an eMachine with an AMD processor. Am I having issues due to the AMD processor? Can someone help? I'd use my onboard audio, but I have a Creative 5. speaker system... I need sound!

Ditto. I see no thread. When I searched for this topic, I found posts of this problem, but never any answers. Please come up with an answer. I sent a request to customer service, and if I get an answer from them before an answer here I'll be sure to post it. Thanks in advance to anyone who can help. My games are no fun without surround sound.

SoundBlaster Live Software Installation Prob

After two weeks of working with support to no avail i find out through this board there are other people having very similar problems. I am running XP home on an emachines system with on-board sound.
When i install the hardware and software card runs fine. After i reboot i can no longer get it to run. I have gone through all the deinstallation routines along with the clean boot. Support has bailed out on me and told me i am sol.
Anybody have any ideas?
Thanks in advance,
Gary

cheers , JUTAPA .
much appreciated .
downloading everything from the site now.

AIR desktop app installation prob

Gidday
I'm having trouble getting my AIR desktop app (AIR2.5 with a self-signed certificate) to do auto updates. I've had it updating fine in the past, but now get the following message:
"This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
Here's my method when I test the installation:
- publish a new AIR file using the SAME version number as the currently released app eg 1.017
- install it on my local machine
- publish a new AIR file with an incremented version number, in this case 1.018
- set my text file that the app checks online for updates to contain 1.018
- upload 1.018 AIR file to my site
- run the desktop app (version 1.017). It successfully detects there's a new version, and downloads it.
- it starts to install, and then I get the error
I've researched this all afternoon, and have found articles mainly talking about expired certificates. So I created a new certificate, and the problem still occurs.
Also, I've tried uninstalling my app from my local machine, but I still get the installation error.
Any ideas how to rectify this, so that I can continue using auto updating rather than force people to uninstall and download the new version for installation?
Thanks for your help.

Nevermind - the txt file that contains the version number and the url for the updater has the url for my live site, not my test one, so I changed it , and it installed fine.

Oracle 8i Post Installation Prob..

Respected members
I succesfully installed Oracle8i on linux
(redhat linux 6.1) . Everything is ok and got a succesfull installation message.
After it i set Path and everything but
but getting listner not available or sometime oracle not available message message
i try to solve prob but still not responding
any one suggest me some idea . i use tcp/ip
protocol and i have enough hardware resource required for oracle 8i installation
Thanking you
Piyush Patel
null

I am having the same problem with my resources.ora as empty.
PLEASE SEND me the content that should go into this file. I need
it to start my OMS service.
my email id is [email protected]

Win 7 installation probs

Info, first.
Toshiba Satellite L775-S7114 (big box v. of L775-S7111). Win 7 installed.
Now, onto the history (condensed version):
Had HDD probs (laptop kept shutting down out of the blue). Tried to restore HDD to factory defaults (on board recovery). During recovery laptop shut down. Started getting "bootmgr.exe missing. Press Ctrl+Alt+Del to restart." Would restart in HDD recovery mode and continued getting same message.
Ordered the recovery media from Toshiba. Didn't work until I installed Win 8 (free OS only version from MS with purchase of this laptop), then used recovery media to factory default back to Win 7. But found out prob was a bad fan. Fan replaced. Found out, then, bad sector on HDD. Bought new HDD from Toshiba (correct P/N for this model). Installed....
Now the bigger picture/problem:
New HDD will not install either OS. Win 7 (recovery media) or Win 8 (OS only). Been trying for months now.... all kinds of workarounds and tricks I can find/think of to get it to install. Been on the phone with Toshiba support toooooo many times with ZERO help or satisfaction. Sooooooo....
Got a wild idea and curious if someone can help me figure out how to do it. Was thinking that if I can connect the new HDD externally to the laptop, that I can somehow manage to install Win 7 (recovery media) to it. Hell, I'll even accept Win 8 (OS only) installation, because I can then install Win 7 in it's place.
I may not be relating this thought in a clear way to the forum, so I'll explain further. Currently the bad HDD is working on this laptop, albeit in a very limited fashion. Every so often it dies, and I have to use the onboard HDD recovery to get it back to running. I would like to externally connect the new HDD (correct one for this laptop model) to this laptop, use the CD-ROM drive to transfer the Win 7 (recovery media), or the Win 8 (OS only) to the new HDD "THROUGH" this laptops CD-ROM drive.
Can this be done? Or would I have to transfer all the data from the Win 7 recovery media disks -or- the Win 8 OS only disc to a USB to transfer it? I'm really not sure how to accomplish this task. But, I am at wits end, as I have sunk a TON of money into trying to repair/rework this laptop (I really like it) to no avail. I can't find a new laptop with the features this one has for anywhere near a reasonable price.
Any help will be greatly appreciated.
All my best to the forum, and thanx in advance.
Nawlins Jeaux

After holding down the option key after starting up, I tried EFI Boot, and the machine just booted into Mac OS X. I restarted again, and I selected Windows from the Win 7 DVD. After whirring a bit, a black screen said the following:
1.
2.
Select CD-ROM boot type.
Please help! Peace.

Oracle 8i on windows terminal server(installation probs.)

-->>oracle 8i installation in terminal server.
i have termianal server client window.
and i am doing remote installation of oracle 8i from client window.
the installation completes copying all files but
when comes for net8configuration and database assistant..
screen gets hang..i mean that service become hang..
like in database creation assistant ..it is not going above 0%.
what to do?
using any other remote viewer will solve this probs?
regards

If you got answer please let me know. I got stock in same place for my Production installation.
[email protected]

Installing war using custom installer or MSI + tomcat question

hi all ! well Im planing since I finished my project to create a installer for the users. I must take into count that most of the users will be non experienced, so I was thinking in making a installer that has already build or ask for installation of this programs & their proper configuration (PHP,Mysql,etc), rather than waiting for a customer to do it. That way I would avoid all kind of troubles with unexperienced users.
So my first question is ... is possible to load the WAR file and make the program run without using tomcats interface?
Or wich would be the best way to do it?
Thanks a lot for any feedback.
Juan Ma

juanmanuelsanchez wrote:
So my first question is ... is possible to load the WAR file and make the program run without using tomcats interface?No. You have basically imlemented an application which requires interface X. You basically need a container which can run the application against interface X.
Or wich would be the best way to do it?Host it somewhere and just give an URL. That's the normal case for webapplications. The way of distributing as you described is only normal for desktop applications.

Installation prob Essbase Administration Services 9.3.1 on HP-UX 11.11

Hello,
I'm having problems while installing the Essbase Administration Console 9.3.1 on HP-UX 11.11.
At the last step, I have the following messages in the Unix console:
...........May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
SEVERE: An exception while extracting the archives.
The message is: java.util.zip.ZipException: error in opening zip file
May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
SEVERE: An exception while extracting the archives.
The message is: java.util.zip.ZipException: error in opening zip file
May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
SEVERE: An exception while extracting the archives.
The message is: java.util.zip.ZipException: error in opening zip file
May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
SEVERE: An exception while extracting the archives.
The message is: java.util.zip.ZipException: error in opening zip file
May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
WARNING: The work folder exists. Make sure that it is empty.
May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
SEVERE: An exception while extracting the archives.
The message is: java.util.zip.ZipException: error in opening zip file
EAS-INSTALL.LOG
==============
(May 29, 2008 4:56:50 PM), eASSuiteContext, com.installshield.product.actions.Files, err, ProductException: (error code = 601; message="Error 0")
STACK_TRACE: 12
ProductException: (error code = 601; message="Error 0")
     at com.installshield.product.actions.Files.install(Files.java:477)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1916)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:5195)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:369)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:333)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:133)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4563)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3758)
     at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)
     at java.lang.Thread.run(Thread.java:595)
Thanks for your help.
Regards,
Andy

Hi all! I faced into similar problem in March. (installing hyperion EAS "MakeEDSLinkEssdlls: not found"
I have also faced to zip error messages as well. I have started communicate with support, and finally I should have installed each product in separate HYPERION HOME, then I have moved them into one. It isn't easy, but can be done. It is a bithunter method:
First install Shared Service, then Essbase Client and Server. It should be ok.
Configure them with configtool HH/common/...
Then install EAS in different HH. You will have another .hyperion.<hostname> file, so save the 'original'. You will find also a HH/common/.. configtool.
Copy the common dir of that HH to the "original" one and other parts in a separate directory under HH original. Then you have to edit product.xml (HH/common/config/product/...) to point product to their new location (in the "original" HH) and copy to the "original". Then run configtool, and you shall see eas unconfigured in productlist as well. Have attention to have the right .<hostname> hyperion files, when starting configtool. Then you can config eas as well. Good luck! *****It is not a supported method, so do it your own risk! Make copy of your existing phases !!!!! ******
Lacko

Itunes and windows installation prob...

I had an older version of itunes and tried to upgrade to 7.1. Everytime I try to download it, I click on the 'itunes setup' icon on my desktop and a 'windows installer' window pops up with a bunch of info that I don't understand. I uninstalled the old itunes and quicktime...any other suggestions?
Windows XP

http://img148.imageshack.us/img148/8793/itunesvs7.png
with that one, let's try the following procedure.
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
Description of the Windows Installer CleanUp Utility
next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
Removing iTunes and QuickTime for Windows
now try another itunes install. does it go through properly this time?

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

MAC OS 10.5.8 Combo update installation probs

Hi!!
I'm trying to update my mac with the new software update, but unfortunately, it can't seem to finish installing. im stuck in the "configuring installation" part. i left the computer for two hours hoping that it would continue with the installation, but it didn't.
what seemed to be problem? do i have to redownload the update?

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

SB Live! 24-bit Headset Prob

I can't seem to make my microphone for my headset work for my Sound Blaster Li've! card work. I've tried plugging it into the input and thrned up the volume and everything I could think of. I would hate to have to resort to my onboard sound system again, so if anyone has a solution or an idea, please share!

Latest....
After reinserting the ATI card, I was not able to test before driver installation due to low resolution video.
I tested after installing the latest ATI driver and still had zero SCP issues.
I then uninstalled the original driver from the SB Li've CD and reinstalled the latest driver from filename SB24_WEB64_LB__04_0055
SCP is BACK!
This DOES seem to indicate a major change in the Creative drivers from original issue to current issue that are not in spec.
My SB Li've model # is SB040.
The information from the p7.inf file on my CD is as follows.....
; Apache INF file
; Models : SB030, SB032, SB0399, SB037, SB043, SB040
; Feature : Enhanced (WDM)
; Language : English
; Date : 04 Jun 2004
; Revision : .03.037 (SoundFont)
; Copyright 995-2004, Creative Technology Ltd.
[Version]
Signature="$CHICAGO$"
Class=MEDIA
ClassGUID={4d36e96c-e325-ce-bfc-08002be038}
provider=%MfgName%
CatalogFile=p7.cat
DriverVer=06/04/2004,5.2.0.34
Perhaps the Creative team can examine any changes between this driver and the current version to see what's going on.
Hope this helps some of the rest of you out there in SCP City!

Addon Installer Prob

Hi,
I am using Simple Installer for installing the Addons in sapb1.
What is the use of the Professional Installer?
how to install multiple addons in Sapb1? which is easy way.
plz help me asap
Regards

Hi,
   Professional Installer is generate standard windows installer that we build using .NET. You can use Merge Module and other standard features that you will get in .NET installer.
One main disadvantage is, it fails in WTS and Citrix.
   Where as the Simple installer is really very simple installer as it named. If you can able to pack your add-on using this simple installer, you can go with this since it light weight and works in WTS and Citrix.
    When you want to install more Add-on, install one by one. I dont thinks there as any short cut exist.
HTH
B Ravi Shankar

Live!Ware 2.1 Installation prob

Similar Messages

Maybe you are looking for