Livecache application in ERP system on HANA

Hello HANA experts,
While exploring DB02 on ERP system based on HANA database, I found there is Livecache node and OMS schema available in database.
Please help me understand use of LiveCache objects in ERP system. It is only ERP on HANA landscape.
Thanks in advance.
Regards,
Ashish

Maybe this is the info you are searching for ?
SAP HANA and SAP SCM liveCache

Similar Messages

SAP NetWeaver Application Server ABAP & SAP Business Warehouse 7.4 SP8 on SAP HANA with ERP-System

Hello,
I have a running Instance of SAP NetWeaver Application Server ABAP & SAP Business Warehouse 7.4 SP8 on SAP HANA 1.0 SP8.
Here I have the minisap Licence of A4H.
When I get the Licence of ERP - do I have a fully ERP System on HANA ?
Or do I need a new Instance?

Hi Julia,
even if you or your company have an SAP license for ERP, you are legally not allowed to install the license key into the free offering it because you have accepted the terms and conditions of the trial/developer version.
If you want to use your own licenses, you would need to switch to the BYOL model where you bring in the license. For that you would need to purchase the SAP Cloud Appliance Library subscription. You get more details here (CAL FAQ - Business related questions ). To purchase the SAP Cloud Appliance Library subscription you would need to select the "Unlock full library" link on the top right corner of the Subscriptions screen on http://cal.sap.com.
Best Regards,
Hannes

How to configure sap maxdb client to connect to SAP ERP system (SAP HR)

Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb client

i tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00                           ( Windows NT )
1. Connect. test with "dbmcli db_state"                         Successful
2. Connect. test with command mode "dbmrfc db_state"            Successful
3. Connect. test with session mode "dbmrfc db_state"            Successful
4. Connect. test with "native SQL" ( LCA )                     No connection
   SQL Code: 4008
    POS(1) Unknown user name/password combination
   For detailed information, see the developer trace for work process:            1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION    SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR       program IDOCTEST not registered
M *
M * TIME        Fri Jan 07 18:15:25 2011
M * RELEASE     701
M * COMPONENT   SAP-Gateway
M * VERSION     2
M * RC          679
M * MODULE      gwr3cpic.c
M * LINE        1778
M * DETAIL      TP IDOCTEST not registered
M * COUNTER     715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani

Integration from Power Builder Application to ERP??

Hey~~~
I want to integrate between power builder application and erp system.
A power builder application is a sender and erp is a receiver.
It should be real-time and sync. scenario.
What adapter should I use for power builder app. in this case?
If someone experienced power builder as third-party, please give me a hint.
Thank you.

Hey
>>Do you means that we call web services in power builder app. ?
generate the WSDL for the powerbuilder application(powerbuilder guys should be able to provide you with it ) and then import this WSDL in IR,then import RFC(as urs is sync scenario)into IR as well,do the request and response mapping.
configure sender SOAP adapter and receiver RFC adapter(also do the pipeline steps ) and there you go,the scenario is complete:)
thanx
Ahmad

Error when publishing a supplier to ERP system

Hello experts,
I am implementing ESO 5.1, SP9 with Integration Package to a ERP 5.0 system.
When trying to publish a vendor to the ERP system, I am getting the following error in ESO:
"Unable to create the file: \Vendor__20110823172054719.xml"
System provides no further information, and can't find anything on ESO logs.
I hope you can point me in the right direction as to how I can get this issue resolved.
Thanks!

Hi,
if you are using FTP, make sure the property is ftp.temp_dir is configured to point to the right path. if not, in the Integrated System Config object, make sure the Export Directory value is maintained. Make sure the path/folder you maintain here is on a shared drive so that it can be accessed from all application servers in the cluster.
Thanks,
Baski

Using Flex to develop a ERP system

I am trying to use Flex4 to develop a ERP system. Now i am using Module technology. it's seem some problem when dynamic loading module. Though I do a force reference in main application. it works. I dont know why and how it happens.
our demo site is http://demo.coolerp.com and our support site is www.coolerp.com
You can check the demo site http://demo.coolerp.com, it seems a little bit slow at the same time.
Now we are usng the following arthictecture to implement ERP
http://www.micsun.com/mainsite/show_list_content.jsp?parentId=1949746407&classId=195080214 8
Any good idea or good architecture for cool ERP, please come to me.
BTW, welcome people knowing ERP or Flex knowledge to join free ERP develoment.
tomby wu

Hey Tomby,
Good to know about your idea. I was thinking on similar line, although my motivation was only 'fun' to do this. However, I have good expertise over other RIA platforms like YUI, jQuery etc. Let me know if I can help you any where. I am available at [email protected]

How to active a PDF Based Form in ERP System

Hi ,
One of user facing problem "When I try to active a PDF Based Form in ERD, I got the following error: u201CINVALID http CONNECTION : ADSu201D
Please can anyone help me in this ,what should i do and how to proceed it slove this issue.
Thanks and Regards
Brijesh Prasad

You need
- an application server JAVA with Adobe Document Service installed
- you need to configure the connection between that Java instance and your ERP system
https://www.sdn.sap.com/irj/sdn/adobe
Markus

How can Oracle ERP system reduce the total cost of ownership

i have read a report that describe the advantages of using Oracle ERP system in different organizations ; it is mentioned that
"+Oracle’s ERP solution suite helps customers achieve 30-80% lower total cost of ownership, benefit from a predictable cost model, and reduce risk+".
So does this means that Oracle ERP system reduce the total cost of ownership because it provides cheaper price comparing to other ERP providers, or it is meant that using Oracle ERP system will reduce the total cost of ownership for other assets in the organization by 30-70% ?
Thanks

My thoughts:
1) Oracle ERP (or any ERP) typically replaces numerous applications. Each of those applications needed separate licensing fees, separate support mechanism, and separate employees in your organization to support them. By consolidating into one, it is easier to support it.
2) Normally, Oracle ERP is cheaper than SAP but it certainly not the cheapest ERP in the market. There are some smaller ERPs which are cheaper but may not offer the breadth that Oracle offers. In fact, Oracle offers a small business ERP that is quite cheaper than EBS.
Sandeep Gandhi

Oracle Linux 6 and Oracle DB for ERP System

All,
I have a few questions about using Oracle Linux 6 and the Oracle Database for our ERP Server. We are using a System that run off of Appache httpd and Tomcat and connects to an Oracle Database. We currently are running as a hardware installed server, with Oracle Linux 5 and 10gR2. We are looking to migrate to a Virtual environment as we run VMWare for all our other Servers and services. I have started the install of a development/test system. I wanted to install Oracle Enterprise Linux 6 x86_64 along with either 10gR2 or 11gR2. I noticed that 10gR2 was not certified on OEL6 hence why the thought of moving to 11gR2. The one issue I have is the ERP system is not a x86_64 system is there any way of running 32 bit apps on a 64bit OEL install? I would need to compile a few small 32bit C code programs so would need 32bit libs to compile against. Any support would be greatly appreciated. I know that OEL has an i386 install but I also know that the x86_64 has more support for Oracle DB.
P.S.
Our ERP System is programmed via a small company that does not certify anything. They have taken the approach if it works it works (not happy with this but it is what it is). So the main issue is I need to get Appache Httpd, Tomcat running along with ability to compile a few small 32bit apps.
Edited by: Rever75 on May 7, 2012 1:45 PM

x86-64 is an extension of the x86 32-bit CISC instruction set. The 64-bit extension provides support for long mode to address larger virtual and physical address spaces.
You can generally run 32-bit applications on a x86_64 bit CPU and a x86_64 kernel, provided you have the appropriate i386 libraries installed. When you install Oracle 11gR2 11.2.0.1 for x86_64, appropriate i386 libraries are a prerequisite.
Since x86 on a x86_64 CPU is still hardware, there will be no performance penalty to run 32-bit application. Btw, you cannot run 64-bit applications using a i386 kernel. The only exception I know is Mac OS X.

How to integrate a sales process across multiple ERP systems with SOA?

Over time we have merged with multiple companies that used to run on their own ERP system. In the past we concerted them to our own R/3 instance. Having recently upgraded from R/3 4.6 to ERP 6.0, we want to transition to a SOA architecture for integrating stand-alone ERP systems. We are looking for best practices on how to start this transition; i.e., how to use SOA to implement an Order-to-Cash process across separate ERP systems.
Here is our scenario:
The same products are sold through ERP system A and ERP system B. However, each system represents a different company code with its separate manufacturing plants. Both systems evolved independently and presently have separate master data. How do you enable a sales process that dynamically (depending on inventory availability) gets the product either from a plant on system A or B? How do you implement a triangular sale that covers both ERP systems?
I am looking forward to learn from your experiences and your advice.

Hi Bernard,
Like most SOA scenarios, first your scenario requires a detailed fit gap analysis to see which of your existing ERP systems best meet which business process that you want to accomplish at an organisation level. It is only after that, that you can decide which capabilities of SAP SOA can you leverage and how.
Broadly speaking, SAP's SOA paradigm provides several approaches which you could use depending on your scenarios. For example, if you only need a brokerage between two or more systems (updating or retrieval of data) either synchronously or asynchronously, your best bet is PI (preferably 7.1 because of its ESR and Services Registry). On the other hand, if you require a new application that acts as a controller of flow or processing across various systems, you could use the Composition Environment which provides you with a toolset to build composite applications across various systems (for instance, by registering services from multiple systems on the Services Registry, and then consuming it from say a WebDynpro application).
The following document might provide you with more insight on this:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/809db91f-9bdf-2910-93be-ca4f0853f929
Hope this helps!
Regards,
Romit

Error occurs when set up middleware to new ERP system

Hi,
We are chainging ERP system to upgrade ERP version.
So we must set up middleware newly on CRM system(CRM 5.0).
so, I made new RFC destination and site..and another middleware setting.
The other initial download is succeed. But when I download the DNL_CUST_PROD1 to get product
hierarchy, this error message occured..-> "Hierarchy R3PRODHIER may only be changed in the original system <system name> ".
And I found the note about this symptom.(Note 369684)
But at this note, I can not find the solution. (or I could not understand the solution.)
I think that I should do the solution No. 4.
As solution No 4, I checked transaction COMM_PRAPPLCAT. Sales application is set to R3PRODHIER. I deleted the sales application. and downloaded again. But this error occured again.
I think I shoul delete R3PRODHIER hierarchy at the transaction COMM_HIERARCHY. But I can not do that.
How should I do?
And I think that I do not understand the solution of Note 369684.
So..please tell me the solution easyly.
Edited by: WON BUM LEE on Sep 26, 2008 10:15 AM

I found the solution. As the note 369684 turn off detective of error message.
At the first time, I didn't do that because that is for CRM4.0. But it is work on the CRM 5.0.

Using Flex to develop ERP system

I am trying to use Flex4 to develop a ERP system. Now i am using Module technology. it's seem some prolbem when dynamic loading module. Thought I have do a force reference in main application. it works. I dont know why and how it happens.
our demo site is http://demo.coolerp.com and our support site is www.coolerp.com
Any good idea please come to me.

This query is best posted to the Flex SDK forums - http://forums.adobe.com/community/flex/flex_general_discussion
Thanks,
Mayank

Can two ERP systems talk to one SCM?

Hello Experts,
We have a requirement to connect Two ERP systems to one SCM system?
Is this option available is available in SCM? CIF processing and optimizer should divide for the two ERP systems in SCM.
Please advice .
Thanks
Ramesh

Hi Ramesh,
Yes; it is possible to integrate multiple R/3 systems with single APO. You need to define multiple business system groups in APO and assign to different R/3 logical systems to be integrated(transaction /SAPAPO/C1 and /SAPAPO/C2). Also you can use CIF enhancements APOCF001 on APO inbound to attach (suffix) a unique R/3 identifier along with product and location codes. For this, you have to maintain a Z table containing the required suffixes. You may further refer to application help in the enhancement transaction.
Regards,
Raghav
Edited by: Raghav_Udupa on Jun 17, 2010 4:29 PM

ERP Systems

What are the other ERP systems in the market besides SAP?

Hi Kiran,
Here is the list of ERP or Vendor.
1.SAP
2. Oracle Applications
3. Infor Global Solutions
4. The Sage Group
5. Microsoft Dynamics (Formerly Microsoft Business Navision)
6. Unit 4 Agresso
7. Lawson Software
8. Epicor
9. Visma
10. Industrial and Financial Systems
11. QAD
12. NetSuite
13. SIV.AG
14. BizAutomation CRM
Hope this will answer your question. You can visit following link for more details...
<a href="http://en.wikipedia.org/wiki/List_of_ERP_vendors">ERP and ERP VENDORS.</a>

Migration erp system aix to windows

Hi,
I want to migrate my erp system on another platform.
Now I am able to migrate my database.
But I am not able to migrate my application Application version is 11.5.10.2
If any body knows please help me.
Currently we are using Aix server and wants to migrate from windows server.
Thanks

Hi,
At a very high level, one option is to install R11.5.10.2 on your Windows server and patch to the same level as your AIX server. Then migrate your database (exp/imp) and rerun autoconfig to setup everything correctly.
For detail the following documents might be a good start:
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=238276.1
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230627.1
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

Livecache application in ERP system on HANA

Similar Messages

Maybe you are looking for