Livecache Error in SCM5.0 - Database Instance Not Found
Hi,
I installed SCM5.0 SR2 IDES version on Windows 2003. I selected Livecache in SAP System option when installing SCM5.0. After complete installation, I executed MAxDb exe file to install the MaxDb. I get this error when I try to access LCA Monitor in LC10.
Here the error details:
Name and Server: LCA - SCMSRVR
DBMRFC Function: DBM_CONNECT
Error: DBM Error
Return Code: -4
Error Message: Database Instance Not Found
It wolud be really helpful if someone could respond to this messgae.
Thanks
Satish
Hello Satish,
-> My assumption was correct. Please see my first reply:
"Please pay attention that the liveCache server software is not supported on the 32bit Windows
server. You could install the liveCache client software on 32 bit Windows server, if the
application running on the 32 bit Windows to be able to communicate to the liveCache instance. The liveCache instance need to be installed on another server, please overview the
PAM matrix or check info at
service.sap.com/liveCache -> Release-Dependent -> SAP LC/LCAPPS 5.0 ->
"Matrix of released OS platforms for SAP liveCache Technology 7.6.0" "
You need the server, where you could install the liveCache instance.
After the liveCache instance will be installed, you need to follow up with the post installation
Steps from the liveCache installation guide, which you could also display from link
service.sap.com/liveCache -> Release-Dependent -> SAP LC/LCAPPS 5.0
-> "Yes.I found the above two files.
Dbmcli.exe --> Found in the directory /sapdb/programs/pgm
Sdbregview.exe --> Found in the directory /sapdb/programs/bin"
==> You could start the command prompt from those directories & run the recommended
commands.
With output of the 'sdbregview -l' command you will get the list of the database packages
installed on the server.
-> Please see helpful SAP notes ::
820824 FAQ: MaxDB / SAP liveCache technology
767598 Available documentation
Thank you and best regards, Natalia Khlopina
Similar Messages
-
DATABASE MANAGER ERROR "-4 database instance not found"
Hi
I have installed NNW 2004 ABAP Trial Version and everything seems to be good. SAP GUI is installed and MAX DB too.
Except, I am unable to "add a database instance" in the Database Manager. The instructions tell me to leave the entries as default (database server: <local> and port: <default>) but then when I click the ADD button up pops the message:
-4 database instance not found
I have a 32 bit Intel Atom processor Netbook running Windows 7 with two drives C: and D:. I have tried disabling my antivir with no avail.
I think the problem could be either:
A) My installation is on the D drive but the database might be searching for something on the C drive????
B) There are some "sap" type entries (like 200 of them) in my system32/drivers/etc/services file. One in particular is "sapdp00 3200/tcp" and I know the installation says make sure there are no "3200 ports". I would like to change this and save the file but up pops a message saying "access is denied" even though I have admin rights.
Any help would be appreciated
JoshPlease, any hints or directions would help immensely as I am not a technical expert
Thanks in advance -
Hi,
When i try to connect to dbmcli the result is
bsa0938:sqdu00 111> dbmcli -U c
Error! Connection failed to node bsa0938 for database U00:
database instance not found
bsa0938:sqdu00 111>
When i checked the database.ini file in /sapdb/data/config there is nothing inside that file
when i checked the dbm.prt file i could see somebody executed db_unreg command.
But the data files and logfiles are there.
To run db_reg command i need that dbmcli working and can v run the db_reg command?.
can anybody help me out here?
Regards,DurairajHi Durairaj,
first of all: databases.ini is nothing you should "look into".
Use "dbmcli db_enum" to figure out what databases there are available.
To re-register a database use the following commands:
dbmcli -R "<dependend_path>" db_create <DBSID> control,<control-pw>
If really all files are still there, then this should be sufficient to access your db instance again.
regards,
Lars -
AIP-50143: Transaction Instance Not found for Transaction Id
Hey Guys,
We have configured a Custom Document Exchange over Generic protocol to transfer a file.
1. Internal delivery channel is 'SFTP' - Picks file
2. External delivery channel is 'SFTP' - Puts file
3. Exchange protocol - Custom document over generic
4. Translation enabled - False (Currently its turned off, but the file is xml so we may want to turn it on)
5. Validation enabled - False
We are encountering below error in B2B while processing. Can someone please help with this.
Thanks,
Phani
010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin PickReqRev 1.0
2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : Cremul version D96A
2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : EDIPHARM version 1.0
2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : PickReqRev version 1.0
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setExchangePlugin Generic version 1.0
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setExchangePlugin info : Genericversion 1.0
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage translated payload =
oracle.tip.adapter.b2b.message.MessageStorage@140fee
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage msg.isSignalMsg() = false
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Call Outgoing Response Processor
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Response:Response:outgoingResponse Enter
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Response:Response:outgoingResponse Update the Request-Response Table Row for RefertoRequestMessageID with message state Processing Outgoing Response
2010.02.05 at 18:41:41:676: Thread-26: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.02.05 at 18:41:41:677: Thread-26: BusinessLogicLayer - (DEBUG) Push Stack: queryBusinessTransactionInstance
2010.02.05 at 18:41:41:693: Thread-26: BusinessLogicLayer - (DEBUG) Pop Stack: queryBusinessTransactionInstance
2010.02.05 at 18:41:41:694: Thread-26: B2B - (ERROR) Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3249)
at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:905)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1170)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.sftp.SFTPProcessor.processMessage(SFTPProcessor.java:188)
at oracle.tip.transport.basic.sftp.SFTPMonitor.processMessage(SFTPMonitor.java:351)
at oracle.tip.transport.basic.sftp.SFTPMonitor.run(SFTPMonitor.java:304)
2010.02.05 at 18:41:42:001: Thread-26: B2B - (DEBUG) Engine:notifyApp Enter
2010.02.05 at 18:41:42:014: Thread-26: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A140A0E126A1276F45000001AD6B570</b2bMessageId>
<errorCode>AIP-50014</errorCode>
<errorText>General Error</errorText>
<errorDescription>
<![CDATA[Machine Info: (fcgemappdev04)
Description: General Error
StackTrace:
Error -: AIP-50014: General Error: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1213)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.sftp.SFTPProcessor.processMessage(SFTPProcessor.java:188)
at oracle.tip.transport.basic.sftp.SFTPMonitor.processMessage(SFTPMonitor.java:351)
at oracle.tip.transport.basic.sftp.SFTPMonitor.run(SFTPMonitor.java:304)
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3252)
at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:905)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1170)
... 4 more
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:874)
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3249)
... 6 more
Caused by: Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
... 7 more
]]>Hi Phani,
What is the naming convention you are using at IDC? If you are sending the response to your TP, then make sure to send ReplyToMsgId as part of file name. If it is not a response, then send MessageType as 1 as part of file name.
For file naming convention required, please refer -
http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_010_Transport_File_FTP_Internal.pdf
Regards,
Anuj -
Shared Services database content not found in the specified database."
Trying to configure Version 11 and get the error: "Shared Services database content not found in the specified database". Relevant details on my issue as below:
- I'm running Windows 7 and SQL Server 2008 on my local machine.
- I did have a previous installation of Hyperion 9 on my machine which I uninstalled before installing 11. However, after uninstalling, I could still see the Hyperion EPM (empty folders) in my "All Programs", which I manually deleted.
- Now I've installed Essbase 11, and for now am trying to configure Hyperion Foundation only (Common Settings and Configure Database is greyed out, I checked deploy to applicaiton server. I left the calculation manager and workspace blank).
- The next window is the "Configure Shared Services and Database Registry" option. I chose "Perform 1st time Configuration of Shared Services Database". When I enter the relevant details, I got the error mentioned above. My error log file entries are as below:
(Jul 14, 2010, 02:10:50 PM), com.hyperion.hit.registry.Registry, ERROR, Exception when trying to store the component
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.RangeCheck(ArrayList.java:546)
at java.util.ArrayList.get(ArrayList.java:321)
at com.hyperion.hit.registry.JDBCRegistryUtils.storeComponent(JDBCRegistryUtils.java:612)
at com.hyperion.hit.registry.JDBCRegistryUtils.saveComponent(JDBCRegistryUtils.java:166)
at com.hyperion.hit.registry.Registry.storeComponent(Registry.java:2749)
at com.hyperion.hit.registry.Registry.getInstance(Registry.java:353)
at com.hyperion.config.wizard.impl.RegistryWizardRule.validate(RegistryWizardRule.java:66)
at com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel.queryEnter(WizardFormAdapterPanel.java:80)
at com.installshield.wizard.awt.AWTWizardUI.currentBeanChanged(Unknown Source)
at com.installshield.wizard.swing.SwingWizardUI.currentBeanChanged(SwingWizardUI.java:842)
at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1822)
(Jul 14, 2010, 02:11:08 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Shared Services database content not found in the specified database.
(Jul 14, 2010, 02:11:58 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Shared Services database content not found in the specified database.
I believe version 11 supports Windows 7, but correct me if I'm wrong. What's going on here? Any suggestions on what I should try ?Actually when I installed version 9, I never got around to configuring shared services and so never had a shared services database in SQL Server to begin with.
One question about the registry entry you told me to delete: The (HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions) which currently exists would be the entry for version 11 which I have installed right? It's the only entry for Hyperion Solutions in the registry.
After uninstalling versino 9, C:/hyperion still existed on my machine (though it didnt have all the subfolders which it did prior to uninstalling), so I manually deleted it before installing verison 11.
I wouldn't mind installing it on a compatible version of windows, but the thing is that at this point this is all that is available to me.
and I don't have any other oracle products.
thanks.... -
Repository error:Error -: AIP-50143:Transaction Instance Not fo
Hi Ramesh,
The Scenario is as follows:
1. we are running a stub on WLI server(back end) which enques a message in to the JMS queue.
2.This JMS queue is used in the B2B internal delivery channel.
3.The message is coming to the B2B , however we are getting an error with the following message.
******ERROR*******
2008.10.31 at 16:29:35:289: Thread-27: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>AC1F755B11D528EE26C000001BDC0BC0</b2bMessageId>
<errorCode>AIP-50014</errorCode>
<errorText>General Error</errorText>
<errorDescription>
<![CDATA[Machine Info: (PUNIN1879164419)
Description: General Error
StackTrace:
Error -: AIP-50014: General Error: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1178)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:134)
at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:609)
at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:235)
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3214)
at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:904)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1135)
... 3 more
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:874)
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3211)
... 5 more
Caused by: Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
... 6 more
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) Engine:notifyApp Exit
2008.10.31 at 16:29:35:304: Thread-27: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50014: General Error
******ERROR*******
the screnario is working when we directly put the message on to the queue.
Please help .
Thanks & Regards
Sachin (Infosys Team)Please refer Re: AIP-50025: Repository error ?
Regards,
Sinkar
[From Ramesh Team] -
Workplace Installation Error: DB instance not found
Hello all,
While installing our Developer Workplace SR2 on our workstation, we encountered an error indicating that the database instance is not found.
FYI, we were able to successfully install two without the problem . It appears that during the installation, it was able to access the database - dropping the said instance - but failed in creating the database instance afterward.
Will reward points for helpful answers.
The log is located below:
> Subprocess starts at 20080729165754
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n BASP-BMZMT1S-D -d J2E -u control,********
Execute Session Command : sql_connect superdba,********
Execute Session Command : sql_execute SELECT USERNAME FROM USERS
Execute Session Command : exit
> Subprocess stops at 20080729165754
OK
OK
END
'CONTROL'
'DBSERVICE'
'SUPERDBA'
> Subprocess starts at 20080729170435
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n BASP-BMZMT1S-D -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20080729170436
OK
State
ONLINE
> Subprocess starts at 20080729170436
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n BASP-BMZMT1S-D -d J2E -u CONTROL,******** db_offline
Execute Session Command : exit
> Subprocess stops at 20080729170440
OK
> Subprocess starts at 20080729170441
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -s -d J2E -u CONTROL,********
Execute Session Command : db_offline
Execute Session Command : db_drop
Execute Session Command : exit
> Subprocess stops at 20080729170442
OK
OK
> Subprocess starts at 20080729170444
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n BASP-BMZMT1S-D -d J2E -u CONTROL,********
Execute Session Command : param_startsession
> Subprocess stops at 20080729170444
> Subprocess call failed
Error! Connection failed to node BASP-BMZMT1S-D for database J2E: database instance not foundHello Juan,
Thanks for the prompt response.
As I reviewed the sequence of the installation, it appears that this could be an installation bug. The sequence does not make sense at all - it drops the database instance and starts a session after that - thus, resulting into the error.
The option I chose during installation is to recreate the default DB instance which is "J2E" that is made available during the MaxDB installation. Thus, it should recreate the "J2E" instance after the dropping of which -- this appears to be missing in the entire sequence.
The Resoultion/Workaround
Well, nothing amazing - but I just chose to make a different DB instance instead of using the existing J2E instance from MaxDB (i.e. DB1). In this approach, it does not have to drop the instance but instead create a NEW instance.
Not a definitive solution but a mere, common sense workaround. But I hope this helps those who has encountered the same issue through the same installation scenario.
Regards,
Jan -
Error while invoking bean "finder": Instance not found in datasource
Hi All
I am facing Error while trying to execute a BPEL processing using Notification service for sending out mail .
Following is the Error Stack :
<ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "finder": Instance not found in datasource.
The process domain was unable to fetch the instance with key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" from the datasource.
Please check that the instance key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" refers to a valid instance that has been started and not removed from the process domain.
ORABPEL-02152
Instance not found in datasource.
The process domain was unable to fetch the instance with key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" from the datasource.
Please check that the instance key "677c0310e56e2b26:26d607:10dca65e80a:-7ffc" refers to a valid instance that has been started and not removed from the process domain.
at com.collaxa.cube.engine.data.AdminFinder.__lookupInstanceMetaData(AdminFinder.java:314)
at com.collaxa.cube.engine.data.AdminFinder.__lookupInstanceMetaData(AdminFinder.java:262)
at com.collaxa.cube.engine.data.AdminFinder.lookupInstanceByConversationId(AdminFinder.java:235)
at [b]com.collaxa.cube.ejb.impl.FinderBean.lookupInstanceByConversationId(FinderBean.java:177)
at IFinderBean_StatelessSessionBeanWrapper42.lookupInstanceByConversationId(IFinderBean_StatelessSessionBeanWrapper42.java:669)
at com.oracle.bpel.client.Locator.lookupInstance(Locator.java:420)
at displayInstance.jspService(_displayInstance.java:111)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:350)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:222)
at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:152)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
<2006-09-20 14:55:44,109> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Error in sending e-mail message.
<2006-09-20 14:55:44,119> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Error in sending e-mail message.
The understanding formed till now is that the service is trigged using a stateless session bean wrapper and the lookup for the same is failing.
One option will be to write the java code for performing the lookup using method
lookupInstanceByConversationId(String convId, DomainAuth auth)
but certain information e.g DomainAuth is not available.
I have tried locating information about the dynamic wrapper which is being created.
Any inputs/comments/direction for the above problem are welcomed
CheersThanks Marc.
I checked the domain log (ORA_BPEL_HOME\bpel\domains\default\logs\domain.log) for information. It repeats the same error displayed in the bpel server window.
I have now put some SOPs in my Java embedding activity to see if the process gets instantiated or not. On the BPEL server window, I am able to see these SOPs upto the point where I invoke a method invocation on my remote Java class. Which clearly means the BPEL process is instantiated, contrary to the information in the error (that the BPEL instance cannot be found) I am getting. -
Webi Refreshing Error :database name not found and no default driver specified
Hi All,
When I refreshing the webi report from Launchpad getting bellow error
"database name not found and no default driver specified"
Bellow is the Screen shot
It is refreshing in webi Rich client (server and client tools are in same system) but not from Launch pad
1. Environment :BI 4.0 SP4
2. Server and client tools are installed in same system
3. Created a 32 bit odbc, universe connection is responding properly and report refreshing in rich client(I could not find 64 bit odbc) .
Can Please suggest me where I am doing wrong
Regards,
MahiHi Mahi,
Seems like your BO server is 64 bits and you have created a 64 bits DSN; whereas your database requires 32 bits DSN.
Try below steps:
1. Navigate to the C:\Windows\SysWOW64 directory and open odbcad32.exe. This will open the ODBC Data Source Administrator for 32-bit drivers on the 64-bit server. NOTE: The ODBC Data Source Administrator that is located by clicking Start and Administrative Tools will only create 64-bit ODBC connections.
2. Click on the System DSN tab
3. Click on Add to create a new Data Source
4. Provide the database details
5. Your 32-bit ODBC data source is now ready for use.
Hope it will help.
Regards,
Yuvraj -
ERROR WHILE INSTALLING DATABASE INSTANCE
Hi All,
I am getting an error while installing database instance in 4.7EE with Oracle 8i.The error is
running sapstart.exe name=AS9 nr=00 SAPDIAHOST=astrum -wait
SAPSTART finished successfully on astrum_AS9_00, but Dispatcher is not connected to MessageServer.
sapparam(1c): No Profile used.
PLEASE HELP ME....hi pavan,
i believe that oracle 8i are no longer supported by SAP.
By default, SAP R/3 4.7 EE should come with Oracle 9i.
Check your installer again.
ardhian
http://sapbasis.wordpress.com -
When trying to install Windows Azure SDK for .NET (VS 2013) - 2.3 from Web Platform Installer 4.6, the install fails because Windows Azure Storage Emulator - 3.0 (Dependency) does not install successfully.
Possibly relevant lines from the install log are:
CAQuietExec: Entering CAQuietExec in C:\WINDOWS\Installer\MSI1223.tmp, version 3.6.3303.0
CAQuietExec: "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\Storage Emulator\WAStorageEmulator.exe" init -forcecreate -autodetect
CAQuietExec: Windows Azure Storage Emulator 3.0.0.0 command line tool
CAQuietExec: Error: No available SQL Instance was found.
CAQuietExec: Error 0xfffffff6: Command line returned an error.
CAQuietExec: Error 0xfffffff6: CAQuietExec Failed
CustomAction RunInitialize returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 11:50:13: InstallFinalize. Return value 3.
Action ended 11:50:13: INSTALL. Return value 3.
In terms of SQL Instance, SQL LocalDB is installed and working properly. SQL Server 2012 is also installed and working properly.Hi,
It is a SDK version issue. I suggest you could remove all azure sdk form your PC and use WPI to install the latest version again.
If you have any questions, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error -: AIP-50904: ReferTo message not found
Hi,
We have 3 windows system acting as TP's (TP1, TP2 and TP3).
When the message is fired from TP1, it reaches TP2 and TP2 sends back an acknowledgement to TP1.
But when the message is fired from TP3, the acknowledgement is being sent back to TP1 instead of TP3 and the error appearing in TP1 is "Error -: AIP-50904: ReferTo message not found".
The configuration on TP2 for TP1 and TP3 are as follows:-
1) The DUNS IDs of TP1 and TP3 are the same.
2) The Delivery channel names in TP1 and TP3 are different.
3) The transport server names are the same, but their IP addresses are different.
4) The agreement names are different, but their Agreement IDs are the same.
Can you please treat this issue on priority and look into it ASAP?
Regards,
Vishal
+919881737231Hi Prasanna,
Thanks a lot for your reply.
The solution given by you worked.
But now iam getting different error at the TP2.
The ACk shows the status as complete but the request PO show error and it takes 20-30 min to process the ack.
The error it shows is as follows:-
rror -: AIP-50903: Message "AC1F755611E2AA4AEA80000017749090-1" retry count is zero
at oracle.tip.adapter.b2b.msgproc.MessageHandler.handleAppMessageRetry(MessageHandler.java:375)
at oracle.tip.adapter.b2b.msgproc.MessageHandler.deliverMessageToDestination(MessageHandler.java:325)
at oracle.tip.adapter.b2b.msgproc.Request.putMsg(Request.java:650)
at oracle.tip.adapter.b2b.msgproc.Request.continueRequest(Request.java:474)
at oracle.tip.adapter.b2b.msgproc.Request.incomingRequest(Request.java:403)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:2042)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2554)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2424)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2379)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2008.12.12 at 15:31:23:938: Thread-16: B2B - (ERROR) Error -: AIP-50903: Message "AC1F755611E2AA4AEA80000017749090-1" retry count is zero
at oracle.tip.adapter.b2b.msgproc.MessageHandler.handleAppMessageRetry(MessageHandler.java:375)
at oracle.tip.adapter.b2b.msgproc.MessageHandler.deliverMessageToDestination(MessageHandler.java:325)
at oracle.tip.adapter.b2b.msgproc.Request.putMsg(Request.java:650)
at oracle.tip.adapter.b2b.msgproc.Request.continueRequest(Request.java:474)
at oracle.tip.adapter.b2b.msgproc.Request.incomingRequest(Request.java:403)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:2042)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2554)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2424)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2379)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateMsgError(3 params) Exit
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) Engine:notifyApp Enter
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = null
2008.12.12 at 15:31:23:938: Thread-16: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>AC1F755611E2AA4AEA80000017749090-1</b2bMessageId>
<errorCode>AIP-50903</errorCode>
<errorText>Message "AC1F755611E2AA4AEA80000017749090-1" retry count is zero</errorText>
<errorDescription>
<![CDATA[Machine Info: (PUNIN1879164449)
Message "AC1F755611E2AA4AEA80000017749090-1" retry count is zero ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
Can you please help me on this.
Regards,
Rakesh -
Error when sending message: 404 not found
Hi,
New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
"Error when sending message : 404 not found"
Also tried in Adapter Engine and the result same.
Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
Any idea's?? what might be the issue????
Thanks,
Venu.Hi Venu,
"404 is a not found error", plz make a check of your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
Select XI Adapter Framework.
Thirteen associations have to be registered.
(Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
If you can't find all the associations, then you will have to create the associations manually.
This is a very good blog which answers ur question:
check this weblog
https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
Regards,
Vinod. -
Shared Services database content not found in the specified database - EPM
I installed three VM machines (Workstation) for the following on Windows 2003 OS:
VM1 : Oragle DB 11g, Shared Services. Workspace
VM2 : Financial Management, EPMA, Calc Manager
VM3 : Microsoft Active Directory
I have configured Database and Shared services successfully and all machines talk to one another.
Also, I created the appropriate table spaces for the Hyperion products with the right access on the database. And, I am able to connect from the client (VM 2 to the Database VM 1)using SQLplus.
When I tried to configure Financial Management, using the EPM System Configurator and put in the following values:
Database Type: Oracle
Server: VMDatabase (Name of VM1)
Port: 1521
SID ORCL
Username: HFM
password: *********
It returned the error message: "*Shared Services database content not found in the specified database*"
Can someone please help on what I need to check, Please!?
Thanks for your time.
KHi,
Information from Oracle Support:
Shared Services database content not found in specified database
Cause
There is a flag in the shared services repository that indicates the shared services database is to be used as a registry. If that flag is not set, the configtool will not re-configure the database as a shared services repository.
Solution
Note: Make sure the Shared Services repository is backed up before doing any Shared Services Registry changes.
The registry flag isRegistryDB must exist and be set to true on the Shared Services Database Connection.
epmsys_registry.bat VIEW DATABASE_CONN
Find the shared services database registry entry. The entry in bold will be missing. The italicized item is the 'unique_id' referenced later (different in each installation).
COMPONENT - 3
NAME - Database:ORCL:HSS
ID - +11d1def534ea1be07ad8eb3012d2e3d310a7ff4+
TYPE - DATABASE_CONN
HOST - Database
HYPERION HOME - /home/hypadmin/Oracle/Middleware/EPMSystem11R1
PROPERTIES -
isRegistryDB = true
dbUserName = HSS
dbJDBCDriverProperty = oracle.jdbc.OracleDriver
dbJdbcUrl = jdbc:oracle:thin:@Database:1521:ORCL
registryDatasource = EPMSystemRegistry
registryDatasourceJNDI = jdbc/EPMSystemRegistry
dbName = ORCL
version = 9.5.0.0
dbPort = 1521
instance_home = /home/hypadmin/Oracle/Middleware/user_projects/epmsystem1
dbPassword = GABaMyyplja+wLNCmLs8ag==
Run the following update to populate the isRegistryDB flag with the unique_id being the ID field used in the DATABASE_CONN registry entry.
epmsys_registry.bat addproperty #unique_id/@isRegistryDB true
Repeat the epmsys_registry VIEW DATABASE_CONN to make sure the flag is now set.
You will be able to reconfigure the shared services repository.
You can mark it as Answer/Helpful if you feel so.
Cheers!
J -
IMPORT ABAP phase error when install database instance
Error number 207 error type SPECIFIC_CODE.
In phase "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution?
Thanks in advance
synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="IboSap-PC\nspadm" does not exist.
Failed action: with parameters
Error number 207 error type SPECIFIC_CODEIt is not easy, really , it has taken many hours and at the End I got the problems,.
so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
without any problem. In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
anyway. thank you for all.
Best Regards.
Maybe you are looking for
-
How to use iMessage on two devices
How can I use iMessage on both my iPhone and iPad. iPad tells me "email already in use?
-
Currently we're experiencing an error on our BW reports link wherein our BW reports thru Internet Explorer can not be displayed. By clicking one of the reports the page can't be displayed. Currently what we are doing just to resolve the problem is to
-
Dears, Please note that we are grouping our invoices in batch number and this batch number is costumized and when we run concurrent request this number batch will be generated automatically in DFF so we are trying to pay these invoices under the batc
-
How to determine the Support Team from the Reported by?
Hello Everyone, I am working with Solution Manager 4.0 and I want to use Automatic Partner Determination in Service Desk. My employer wants the Support Team (SLFN0003) to be determined by the Reported by (SLFN0002). There are already parts of the Aut
-
[solved]RAID1 array is showing only one disk
Hi, I configured RAID1 on my Arch Linux system. Sometime during the past few days (I don't know when) I think SATA cable of one of the disks (sda) went loose. I got a hint by some error messages in dmesg output. I realized this only today. To minimiz