LiveCache Installation (Database creation) problems
We are trying to install liveCache 7.6.29 (SCM 5.0 SR2), during the database creation phase we are encountering the below error;
Execute Command : /sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,
Start subprocess as user with uid: root
> Subprocess stops at 20070522205211
ERR
-24875,ERR_NEEDADMI: The operating system user is not a member of the database administrators group
-24994,ERR_RTE: Runtime environment error
20145,UNIX password ********
Please let me know if any of you have faced this issue and resolved the same.
Eagerly waiting for your reply, as this is a high priority for me.
Regards,
Thilaka
Hi Thilaka,
hm, why are you now askig the forum when you've direct email contact with me?
Anyway, this really should be handled over OSS...
Just fyi:
It seems that SAPINST is trying to issue the following command:
/sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,
Can you try and see if you can issue it from the commandline on your machine (with the same user, i.e. probably root)? Please do not forget to add the password of the ql1adm, which is either not visible in the above command or forgotten (by SAPINST):
/sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,<b><password></b>
After issueing this, please try to continue using SAPINST (and please update the OSS message accordingly).
Regards,
Roland
Similar Messages
-
Database creation problem on Windows XP
Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM -
Database creation problems and parition consolidation
This is my first time on here so please look past my green-ness. =)
I Installed Oracle 8.1.7 successfully and opted to setup the database creation later so I could put the database on another partition. Well, I tried once to create the database on the partition I installed oracle onto (/oracle) but I had insufficient space, It said I needed 1.3 gigs. My "/database" partition is only a 1 gig parition (and /oracle is 2 gigs). My plan was of course, to seperate them.
Ok, I didn't see an option to create the db on another partition so I resigned to using /oracle. My question now is, is the 960 megs on /oracle enough to create the database? I used the custom setup so I could see how everything was broken down and I noticed that my rollback segment is 500 megs. Is this necessary? Can I get by with 100 megs and be fine? Also, if I did do this, I'd have approximately 100 megs free for data, this is enough I hope??
Lastly, I need to combine the partitions somehow without effecting /. The hard drive is broken down into:
gigs
5.5 /
2.0 /oracle
1.0 /database
Does anyone have any ideas? In windows, I used partiton magic but I don't know if there is a linux version.
One more thought (last one for real =), it had 50 megs allocated for it's shared memory pool. I'm assuming this will take away from the 128megs I have thus effectively making only 78 available to X, will this cause any noticeable problems other than a bit of slowdown? I have most if not all of my virtual memory free at all times. I know I should get more ram, but you know how the budget thing goes...
Any help would be greatly appreciated,
RobTry running the catalog and catproc sql scripts.
$ cd $ORACLE_HOME/rdbms/lib
$ svrmgrl
connect internal
@catalog
@catproc
That will set up all of the internal views and packages that
oracle needs to do DDL.
Scott
Don DeLuca (guest) wrote:
: I'm gotten through the install and created the database. The
: database comes up, I can do some simple stuff like create a new
: user, create a simple table but when I try to run SQL DDL
: statements I get errors saying: "recursive SQL error". I
: looked at the sql.log file after the install. It doesn't look
: like all the packages were created successfully. Have others
had
: similiar problems with the system table/package creation? To
me
: it looks like a DDL that was needed was not called during the
: install and later caused problems during package creation.
: This is my fourth time installing and I have the same problem
: each time. I also tried to run the plsql.sql file to recreate
: some of the packages but this did not work either.
: I've just about given up and I'm starting to realize why its
: free.
null -
Help!! I have installed 8i on RH Linux 6.1 and followed the "Friendly" guide steps, it worked perfectly. However when I try to create a database using the Database assistant, I get an error "Oracle Not Logged on" I've reinstalled twice and still have the same problems - can anyone help?
Thanks for any suggestions/help!
nullThis problem doesn't just occur on Linux. I have encountered the same on both Digital Unix and HP/UX. I finally gave up and told it to just create the scripts. Looking at the scripts, there are a number of different problems depending on the items that you choose to install and/or customizations to db setup, such as size and placing of files.
To find them, I generated the scripts and then looked at the contents and used svrmgrl to individually run commands so that I could see the "real" error message.
It's been awhile but I think the not logged on was a failure in the initial create database command... Or maybe it was the MAX_ENABLED_ROLES being too small in the default init file to support some of the products... Or the rollback segments being created as private and not being automatically added to the init before the assistant does a shutdown and restart... Or it creating the rollback segment tablespace not the size and parameters that I requested...
You may guess by now I wasn't too impressed by the dbassist program. All I can say is doesn't anyone believe in testing anymore? I have a hard time believing that anyone at Oracle actually tested running this product and actually using any of it's features.
This really pissed me off because when I first saw the pretty GUI and nice interface I thought WOW, this is great, finally something to make database creation simpler than running all those commands and scripts. -
BAM database creation problem in Enterprise Server
Hi,
We are trying to create a new database and config BAM inside the Enterprise Server. We have already created the engine db and the directory service db but we did not start the BAM or create any db or configure anything for BAM inside the Enterprise Server.
Now when we create a new external resource to create a new db for BAM and then goto Process Monitoring ---> Manage Database
and then create a new database and a new data structure and enter the Database Administrator User and the Database Administrator Password, it gives us an error:-
Username and password already exists and it could not be created..
We have tried all usernames and passwords but could not create the BAM..
We also used the system user and the password..
What could be the possible problem? Do we have to create the BAM db while configuring the engine db and directory service db or can we start and configure BAM later?
How do we resolve this problem?
The documents do not specify what is the
Database Administrator Password
and
Database Administrator User is?
What are these?
Anybody knows?Hi,
Lilach's tip should get you going.
Suspect you won't need it, but here's a link to a BAM installation document I wrote that might also help you with your Oracle BPM 10g installation - http://www.4shared.com/file/136283546/ca086174/ALBPM_60_-Configuringthe_BAM_Updater.html. It's an update of the excellent ALBPM 5.7 BAM installation document that Gustavo in Customer Support wrote a few years ago. Although it was written for ALBPM 6.0, the steps will work with Oracle BPM 10g.
Here's another thread on this forum regarding BAM installation - Re: Problems with the albpmwarehouse service
Hope this helps,
Dan -
I followed the oracle press dba 8 book 2.
I create the password file with password a.
I also create the database with instance u16.
When i start with my database using svrmgrl
the said password does not work.
what may be the possible reason.
nullyes u are right, i check my initu16.ora
and it is shared, i will change it
then i will be able to send the right
reply.
but very very thnaks for so quick reply.
if u don't mind if u will tell me in which
category i will place my dba problems questions because the list is so completed that
oracle 8i value is not available
null -
While we are trying to create new database in test server it getting below error.
Error:Hello,
There may be session accessing the model database, and that prevents the creation of the new database. This is by design; an exclusive lock is required on model database by SQL Server, since it needs to create the new database from a copy of the model database.
Run the sp_who2 to know which session has opening the model database.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Standby Database Creation problem
Hi,
I have setup Standby Database for our Primary DAtabae,
I am facing probel while applying redo logs, if somebody nows the solution, Please help me.
SQL> startup nomount PFILE='E:\oracle\admin\fno\pfile\init.ora';
ORACLE instance started.
Total System Global Area 730931140 bytes
Fixed Size 454596 bytes
Variable Size 285212672 bytes
Database Buffers 444596224 bytes
Redo Buffers 667648 bytes
SQL> ALTER DATABASE MOUNT STANDBY DATABASE;
Database altered.
SQL> RECOVER STANDBY DATABASE;
ORA-00279: change 7990686470 generated at 04/01/2006 15:53:57 needed
for threa
1
ORA-00289: suggestion : F:\ORACLE\ORADATA\FNO\ARCH\LOG_17032.ARC
ORA-00280: change 7990686470 for thread 1 is in sequence #7032
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
AUTO
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [3020], [8388681], [1],
[7032],
[137367], [16], [], []
ORA-10567: Redo is inconsistent with data block (file# 2, block# 73)
ORA-10564: tablespace UNDOTBS1
ORA-01110: data file 2: 'G:\ORACLE\ORADATA\FNO\UNDOTBS01.DBF'
ORA-10560: block type 'KTU SMU HEADER BLOCK'
ORA-01112: media recovery not started
Ramesh
pls mail me : [email protected]
+91 080 9341018616Hi,
I have setup Standby Database for our Primary DAtabae,
I am facing probel while applying redo logs, if somebody nows the solution, Please help me.
SQL> startup nomount PFILE='E:\oracle\admin\fno\pfile\init.ora';
ORACLE instance started.
Total System Global Area 730931140 bytes
Fixed Size 454596 bytes
Variable Size 285212672 bytes
Database Buffers 444596224 bytes
Redo Buffers 667648 bytes
SQL> ALTER DATABASE MOUNT STANDBY DATABASE;
Database altered.
SQL> RECOVER STANDBY DATABASE;
ORA-00279: change 7990686470 generated at 04/01/2006 15:53:57 needed
for threa
1
ORA-00289: suggestion : F:\ORACLE\ORADATA\FNO\ARCH\LOG_17032.ARC
ORA-00280: change 7990686470 for thread 1 is in sequence #7032
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
AUTO
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [3020], [8388681], [1],
[7032],
[137367], [16], [], []
ORA-10567: Redo is inconsistent with data block (file# 2, block# 73)
ORA-10564: tablespace UNDOTBS1
ORA-01110: data file 2: 'G:\ORACLE\ORADATA\FNO\UNDOTBS01.DBF'
ORA-10560: block type 'KTU SMU HEADER BLOCK'
ORA-01112: media recovery not started
Ramesh
pls mail me : [email protected]
+91 080 9341018616 -
Hi Friends,
OS = Windows XP 3
Database = Oracle 11g R2 32 bit
Processor= intel p4 2.86 Ghz
Ram = 2 gb
Virtual memory = 4gb
I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it.....
ORA-28056: Writing audit records to Windows Event Log failed Error and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
Please some one help me out, as i need to install on the same machine .....
Thanks and RegardsAAP wrote:
Thanks Now I am able to Create a database , but with one error,
When I created a database using DBCA, at the last stage I got this error,
Database Configuration Assistant : Warning
Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it. Start the listener & Registered database service & run EM Configuration Assistant again....
But when I checked the listener was up.....
Now what was the problem, I am able to connect and work through sqlplus,
But I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
Thanks & Regards
Creation of the dbcontrol requires a connection via the listener. When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete. Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)? That needs to be the first order of business. -
Problem during Database Creation of 8.1.7 in Linux7.2
hello folks,
i am having a problem in creating database of 8.1.7 in Linux7.2 RedHat.
after successful installation,,and after even successfull listener configuration,,
when database creation assistant is creating database; On 82%
At "Initializing database"
it comes::
ORA-03114: not connected to ORACLE
and if we keep on ignoring it ,then it comes:
end of file communication channel.
plz help me what i would do,,
regards.Hi,
seems that your oracle database went down. just check if oracle is running or not by using ps command.
if its not running go to $ prompt and start the database either using sys or internal user i.e
$svrmgrl
connect internal
$startup or startup force
let me know the result.
Yogi
[email protected] -
Oracle 9i installation hanging in "Clone Database Creation in Process"
Hi all,
I have been struggling in installing the 9i in my laptop.
Here is my setup,
OS: Windows Server 2003 Enterprise Edition SP2 in VMWare
Database: Oracle 9i 9.2.0.1.0
When it automatically comes to "Database Configuration Assistant", there are 4 steps.
Copying Database files
Initializing Database
Creating and starting Oracle Instance
Completing database creation
The 1st 3 steps has been completed and the installation just hangs at the last step when the completion rate is 88%.
Anyone got problem like this ?
Here are the details I have so far for the DBCA during installation process,
Listener Control complete.
Listener start failed. Listener may already be running.
Listener configuration complete.
Default local naming configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Since I am completely new to installing DB, please help me to get rid of this frustration.
Thanks !
Regards,
ChrisCapacity Planner 9.2.0.1.0
Enterprise Manager Events 9.2.0.1.0
Enterprise Manager Base Classes 9.2.0.1.0
Required Support Files 9.2.0.1.0
Enterprise Manager Installation Prerequisite Checks 9.2.0.1.0
Utilities Common Files 9.2.0.1.0
Enterprise Manager Quick Tours 9.2.0.1.0
Oracle Display Fonts 9.0.2.0.0
regexp 2.0.20.0.0
Oracle OLAP Worksheet 9.2.0.1.0
Oracle OLAP API 9.2.0.1.0
Oracle Developer Server Forms Manager 9.2.0.1.0
Oracle Intelligent Agent Base Component Files 9.2.0.1.0
Oracle Internet Directory Client Common Files 9.2.0.1.0
Sun JDK 1.3.1.0.1a
Oracle Directory Manager 9.2.0.1.0
Visigenics ORB 3.4.0.0.0
Assistant Common Files 9.2.0.1.0
Enterprise Manager Paging and OMS Common Files 9.2.0.1.0
XML Parser for C 9.2.0.1.0
Oracle Net Configuration Assistant 9.2.0.1.0
Character Set Migration Utility 9.2.0.1.0
Enterprise Manage Website Translated Files 9.2.0.1.0
Oracle Net Manager 9.2.0.1.0
Oracle Net 9.2.0.1.0
Oracle Perl Interpreter 5.00503.0.0.0c
Apache Web Server files 1.3.22.0.0a
Oracle JDBC/OCI Driver for JDK 1.4 9.2.0.1.0
Database Configuration Assistant 9.2.0.1.0
Oracle JDBC/OCI Driver for JDK 1.2 9.2.0.1.0
Oracle INTYPE File Assistant 9.2.0.1.0
SQLJ Runtime 9.2.0.1.0
Oracle JDBC/OCI Interfaces 9.2.0.1.0
Advanced Queueing (AQ) API 9.2.0.1.0
Oracle Caching Service for Java 2.1.0.0.0a
Recovery Manager 9.2.0.1.0
JSDK 2.0.0.0.0d
Apache JServ 1.1.0.0.0g
Oracle interMedia Java Client 9.2.0.1.0
Oracle Java Layout Engine 2.0.1.0.0
Oracle Administration Assistant for Windows NT 9.2.0.1.0
Oracle XML SQL Utility 9.2.0.1.0
SQLJ Translator 9.2.0.1.0
Enterprise Login Assistant 9.2.0.1.0
Oracle Services For Microsoft Transaction Server 9.2.0.1.0
Enterprise Manager Paging Server 9.2.0.1.0
Oracle Java Tools 9.2.0.1.0
Oracle ODBC Driver 9.2.0.1.0
Authentication and Encryption 9.2.0.1.0
Oracle Wallet Manager 9.2.0.1.0
Oracle Database User Interface 2.2.11.0.0
Oracle SNMP Agent 9.2.0.1.0
Oracle Provider for OLE DB 9.2.0.1.0
Oracle Objects for OLE 9.2.0.4.4
Oracle C++ Call Interface 9.2.0.1.0
Oracle OLAP Cube Viewer 9.2.0.1.0
Oracle OLAP CWM Lite 9.2.0.1.0
Object Type Translator 9.2.0.1.0
SQL*Plus 9.2.0.1.0
Oracle Call Interface (OCI) 9.2.0.1.0
SQL*Loader 9.2.0.1.0
Secure Socket Layer 9.2.0.1.0
Oracle Internet Directory Client 9.2.0.1.0
Oracle Net Listener 9.2.0.1.0
Advanced Replication 9.2.0.1.0
Oracle Complete DSS Starter Database 9.2.0.1.0
Oracle Complete OLTP Starter Database 9.2.0.1.0
Oracle Starter Database 9.2.0.1.0
Oracle Message Gateway Common Files 9.2.0.1.0
Oracle Common Schema Demos 9.2.0.1.0
Change Management Common Files 9.2.0.1.0
Oracle UIX 2.0.20.0.0
Oracle Help for the Web 1.0.7.0.0
XML Class Generator for C++ 9.2.0.1.0
XML Parser for C++ 9.2.0.1.0
XML Parser for Oracle JVM 9.2.0.1.0
XML Transx 9.2.0.1.0
XML Transviewer Beans 9.2.0.1.0
XML Class Generator for Java 9.2.0.1.0
XSQL Servlet 9.2.0.1.0
XML Parser for PL/SQL 9.2.0.1.0
Oracle SQLJ 9.2.0.1.0
Enterprise Manager Common Files 9.2.0.1.0
Common Files For Generic Connectivity Using OLEDB 9.2.0.1.0
Oracle SOAP Client 2.0.0.0.0a
Oracle Workflow Manager 9.2.0.1.0
Oracle Net Integration 9.2.0.1.0
Oracle XML Runtime Components 9.2.0.1.0
Enterprise Manager Database Applications 9.2.0.1.0
Oracle SOAP Server 2.0.0.0.0a
Oracle Database Demos 9.2.0.1.0
Oracle Ultra Search Common Files 9.2.0.1.0
Enterprise Manager Console 9.2.0.1.0
Enterprise Manager Integrated Applications 9.2.0.1.0
Enterprise Manager Client 9.2.0.1.0
Database Workspace Manager 9.2.0.1.0
Oracle interMedia Java Advanced Imaging 9.2.0.1.0
Oracle interMedia Client Compatibility Files 9.2.0.1.0
Oracle interMedia Java Media Framework Client 9.2.0.1.0
Oracle interMedia Client Demos 9.2.0.1.0
Oracle interMedia Web Client 9.2.0.1.0
BC4J Runtime for Database 9.0.2.692.1
Oracle Change Management Pack 9.2.0.1.0
Oracle interMedia Annotator 9.2.0.1.0
Data Management Services Common Files 9.2.0.1.0
Oracle interMedia Common Files 9.2.0.1.0
Oracle interMedia Image 9.2.0.1.0
Oracle interMedia Audio 9.2.0.1.0
Oracle interMedia Video 9.2.0.1.0
Database Upgrade Assistant 9.2.0.1.0
Oracle Intelligent Agent Config Tool 9.2.0.1.0
Oracle Intelligent Agent 9.2.0.1.0
PL/SQL Embedded Gateway 9.2.0.1.0
Oracle HTTP Server Extensions 9.2.0.1.0
Oracle eBusiness Management Extensions 9.2.0.1.0
Oracle EMD Agent Extensions 9.2.0.1.0
Oracle interMedia Client Option 9.2.0.1.0
Oracle SOAP for JServ 2.0.0.0.0a
MIcrosoft SQLServer(TM) Extensions 9.2.0.1.0
Oracle Management Pack for Oracle Applications 9.2.0.1.0
Oracle Windows Interfaces 9.2.0.1.0
Export/Import 9.2.0.1.0
Apache Configuration for Oracle XML Developer's Kit 9.2.0.1.0
Oracle Tuning Pack 9.2.0.1.0
Oracle Forms Extensions 9.2.0.1.0
Oracle XML Developer's Kit 9.2.0.1.0
Oracle Java Server Pages 1.1.3.1.0
Oracle Diagnostics Pack 9.2.0.1.0
Oracle Ultra Search Middle-Tier 9.2.0.1.0
Oracle Dynamic Services Server 9.2.0.1.0
Oracle Mod PL/SQL Gateway 3.0.9.8.3b
Apache Configuration for Oracle Java Server Pages 1.1.2.3.0
Oracle Text 9.2.0.1.0
Generic Connectivity Common Files 9.2.0.1.0
New Database ID 9.2.0.1.0
Database SQL Scripts 9.2.0.1.0
Generic Connectivity Using OLEDB - SQL 9.2.0.1.0
Oracle HTTP Server 9.2.0.1.0
XML 9.2.0.1.0
Generic Connectivity Using OLEDB - FS 9.2.0.1.0
iSQL*Plus 9.2.0.1.0
Generic Connectivity Using ODBC 9.2.0.1.0
Enterprise Manager Webserver Integration 9.2.0.1.0
Reporting Framework 9.2.0.1.0
Oracle interMedia Locator 9.2.0.1.0
Oracle Management Server 9.2.0.1.0
Oracle Ultra Search Server 9.2.0.1.0
Oracle interMedia 9.2.0.1.0
Oracle Trace 9.2.0.1.0
Oracle9i Syndication Server 9.2.0.1.0
Enterprise Manager Web Site 9.2.0.1.0
Oracle Applications Extensions 9.2.0.1.0
Oracle Intelligent Agent Extensions 9.2.0.1.0
Oracle Programmer 9.2.0.1.0
Migration Utility 9.2.0.1.0
Oracle Enterprise Manager Products 9.2.0.1.0
Oracle9i Development Kit 9.2.0.1.0
Oracle Advanced Security 9.2.0.1.0
Oracle JVM 9.2.0.1.0
Database Verify Utility 9.2.0.1.0
PL/SQL 9.2.0.1.0
Oracle Database Utilities 9.2.0.1.0
Oracle9i 9.2.0.1.0
Oracle Net Services 9.2.0.1.0
Oracle COM Automation Feature 9.2.0.1.0
Oracle Data Mining 9.2.0.1.0
Oracle OLAP 9.2.0.1.0
Oracle Spatial 9.2.0.1.0
Oracle Partitioning 9.2.0.1.0
Enterprise Edition Options 9.2.0.1.0
Oracle9i Database 9.2.0.1.0
Starting to execute optional autolaunch configuration tools
Launched configuration tool Oracle Net Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.8\bin/jrew.exe -Duser.dir=C:\oracle\ora92\network\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\oracle\ora92\jlib\ewt3.jar;C:\oracle\ora92\jlib\ewtcompat-3_3_15.jar;C:\oracle\ora92\network\jlib\NetCA.jar;C:\oracle\ora92\network\jlib\netcam.jar;C:\oracle\ora92\jlib\netcfg.jar;C:\oracle\ora92\jlib\help3.jar;C:\oracle\ora92\jlib\oracle_ice5.jar;C:\oracle\ora92\jlib\share.jar;C:\oracle\ora92\jlib\swingall-1_1_1.jar;C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;C:\oracle\ora92\jlib\srvm.jar;C:\oracle\ora92\network\tools" oracle.net.ca.NetCA /orahome C:\oracle\ora92 /orahnam OraHome92 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp,tcps /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile C:\oracle\ora92\network\install\netca_typ.rsp
Configuration tool Oracle Net Configuration Assistant succeeded
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.8\bin/jrew.exe -DORACLE_HOME="C:\oracle\ora92" -DJDBC_PROTOCOL="thin" -classpath ";C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\oracle\ora92\jlib\ewt3.jar;C:\oracle\ora92\jlib\kodiak.jar;C:\oracle\ora92\jlib\ewtcompat-3_3_15.jar;C:\oracle\ora92\lib\xmlparserv2.jar;C:\oracle\ora92\jdbc\lib\classes111.zip;C:\oracle\ora92\classes;C:\oracle\ora92\jlib\gss-1-1.zip;C:\oracle\ora92\jlib\oembase-9_2_0.jar;C:\oracle\ora92\jlib\srvm.jar;C:\oracle\ora92\assistants\jlib\assistantsCommon.jar;C:\oracle\ora92\jlib\share.jar;C:\oracle\ora92\jlib\swingall-1_1_1.jar;C:\oracle\ora92\assistants\dbca\jlib\dbca.jar;C:\oracle\ora92\jlib\help3.jar;C:\oracle\ora92\jlib\oracle_ice5.jar;C:\oracle\ora92\jlib\netcfg.jar;C:\oracle\ora92\lib\vbjorb.jar;C:\oracle\ora92\lib\vbjtools.jar;C:\oracle\ora92\lib\vbjapp.jar;" oracle.sysman.assistants.dbca.Dbca -progress_only -createDatabase -templateName General_Purpose.dbc -gdbName orcl -sid orcl -datafileJarLocation C:\oracle\ora92\assistants\dbca\templates -datafileDestination C:\oracle\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -passwordDialog true Protected value, not to be logged -
Installation stops during Database Creation at 45%
Hi all,
I am trying to install Oracle 10g on Windows 2003 Server but whenever i installed it I faced this problem that after installation during configuration proccess when it creats database it stucks on 45% showing status clone databse creation in progress... i have checked log files and i see this
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 289406976 bytes
Fixed Size 1248576 bytes
Variable Size 92275392 bytes
Database Buffers 188743680 bytes
Redo Buffers 7139328 bytes
USERS
specify password for SYS as parameter 1:
specify password for HR as parameter 2:
specify password for OE as parameter 3:
specify password for PM as parameter 4:
specify password for IX as parameter 5:
specify password for SH as parameter 6:
specify password for BI as parameter 7:
specify INPUT metadata import file as parameter 8:
specify INPUT database backup file for tablespace EXAMPLE as parameter 9:
specify OUTPUT database file for tablespace EXAMPLE as parameter 10:
specify OUTPUT log directory as parameter 11:Sample Schemas are being plugged in ...
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
20070625 04:41:09
1 row selected.
old 1: CREATE USER hr IDENTIFIED BY &&password_hr
new 1: CREATE USER hr IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER oe IDENTIFIED BY &&password_oe
new 1: CREATE USER oe IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER ix IDENTIFIED BY &&password_ix
new 1: CREATE USER ix IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER sh IDENTIFIED BY &&password_sh
new 1: CREATE USER sh IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER pm IDENTIFIED BY &&password_pm
new 1: CREATE USER pm IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER bi IDENTIFIED BY &&password_bi
new 1: CREATE USER bi IDENTIFIED BY change_on_install
User created.
Directory created.
Directory created.
Directory created.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
PL/SQL procedure successfully completed.
Grant succeeded.
Could anyone please let me know how can i fix this issue...The key of the problem may be found here:
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
Which means the dbca is not recognizing some parameter. Initial database creation assumes you are able to connect as sysda without a password, Which means you should be able to connect as a valid user with ORA_DBA and connect as batch privileges. If you are installing with domain related authentication issues, then it could be the most likely reason dbca is not able to go ahead with installation.
1. Determine if you are connected with the ORA_DBA group privilege. It should be so if you are locally connected (not with a domain account)
2. Verfiy if you are able to connect as sysdba, open a sql prompt this way:
sqlplus / as sysdba
3. If you are able to connect, it means your authentication mechanism is properly working.
4. Verify the contents of the alert.log associated with the instance, some error message there will bring light on this issue.
Please feedback on the results of this initial troubleshooting procedure.
~ Madrid. -
Well trying to install CS three I get a message the installer database is corrupted please contact Adobe service if this problem continues
CS3 forever if the installer database is corrupted then you will first want to install with a fresh copy of the installation files. You can download a fresh copy of the CS3 installation files at Download CS3 products.
-
Problems from oracle designer to database creation
i am getting the following problem when creating a database using oracle designer:
"has no role cannot regenerate"
this is specific to the primary keys of each table
has anyone come across this before? any ideas guys?
AndyI think this belongs in another forum, but could you answer this question: Are you trying to generate database creation scripts by select Create Oracle Database in the DB Admin tab of the Design Editor?
Kind regards,
Russ Cannon -
My session in xmanager will die after 80% of database creation completes
Hi,
I am instaling oracle 10g on solaris through xmanager(X terminal), first i installed oracle 10g software only and i invoked dbca through xmanager after 80% of database creation completes my session will die i tried 4 times same problem, any body have faced the same problem, advice greately appreciated.
Thanks
PrakashDid you check installation logs ?
oraInventory/logs/installActions<timestamp>.log
<ORACLE_HOME>/cfgtoollogs/oui/installActions<timestamp>.log
Maybe you are looking for
-
Hello Experts, I have few questions arising from reports RHINTE00 and others I want to know if we are implementing only PA then do we have to maintain a table where we define org unit, positions etc? Now suppose we install OM as well, then when we ru
-
After effect, removing a back ground noise of the audio
Hi, I am trying to edit the audio of a video. The video is a simple speech. There is a back ground noise(door shot) which I need to remove it. I have been trying many different ways, but they have effect on the original speech. Is there anyway that I
-
FPS not matching orginal F4V from Captivate
I have a number of videos that I have exported from Captivate projects and the FPS is different on each one, when I use Adobe Media Encoder to re-encode these videos the FPS does not match the original. I have set the FPS to match the original, but t
-
Create Workspace without demo-application and tables
Is it possible to crate a new workspace on a existing schema without creating new tables and demo-applications? Thanks Mario
-
I have iTunes working in Windows. I have Windows Media Player automatically adding (unprotected) iTunes tracks. I have Windows Media Player reading tags in AAC tracks (from iTunes). I have Windows Media Player able to play AAC tracks (from iTunes). I