LiveCache lock server is not installed

Hi All,
Job /SAPAPO/OM_DELETE_OLD_SIMSESS has been failed:
Job log says:
Job started
Step 001 started (program /SAPAPO/OM_DELETE_OLD_SIMSESS, variant , user ID BATCHSCHE)
evaluate oms_versions
evaluate simsession delta
obsolete transactional simulations
<b>liveCache lock server is not installed</b>
Job cancelled after system exception ERROR_MESSAGE
Same was finished successfully and its job log says:
Job started
Step 001 started (program /SAPAPO/OM_DELETE_OLD_SIMSESS, variant , user ID BATCHSCHE)
evaluate oms_versions
evaluate simsession delta
obsolete transactional simulations
Job finished
liveCache lock server is not installed seems to be extra.Any hint?
Thanks in advance.
Regards,
Tushar

Hello,
Just forgot to give server details:
KERNEL 7.6.01 BUILD 009-123-141-487
DBMServer 7.6.01 Build 009-123-141-487
SCM basis 700 sp 11
Regards,
Tushar

Similar Messages

Livecache lock server not accessible after system refresh

Hello,
I have performed a refresh of SCM + livecache from production to QA when starting the livacache from LC10 i get a message Livecache lock server not accessible. The livecache is started but when i look at the status there is a warning SQL access not possible.
I did an export of the config table and reimport and the server named are correctly defined for:
LCA
LDA
LEA
From the administration report of LCA
Initialize livecache
Follow-up Processing: /SAPAPO/DELETE_LC_ANCHORS
Start Livecache
Follow-up Processing: SLCA_LCK_SYNCHOWNERS
By running those program in se38
SLCA_LCK_SYNCHOWNERS (Livecache lock server not accessible)
SLCA_NON_LC_RELEVANT_CLIENT (Could not create a connection to livecache)
I checked and the relevant client is selected.
When i check the alert monitor from livecache - lca - connectivity - dbmrfc and native sql is in red with the following message:
SQL Statement Execution Instance Online, but no SQL access possible.
Also from SM21 i have errors saying Database error -4025 at CON
Let me know if you already encountered this issue and how it was resolved.
Thank you,
Martin Mayer
Edited by: Martin Mayer on Jan 4, 2012 4:02 PM
Edited by: Martin Mayer on Jan 4, 2012 4:07 PM

I have checked that tread already the thing is when performing the check In db59, I´ve the LCA,LDA,LEA it fails.
1. Connect. test with "dbmcli db_state"                         Successful
2. Connect. test with command mode "dbmrfc db_state"            Successful
3. Connect. test with session mode "dbmrfc db_state"            Successful
4. Connect. test with "native SQL" ( LCA )                     No connection
   SQL Code: 4025
Edited by: Martin Mayer on Jan 4, 2012 5:26 PM

How to use wlappc on a build machine where weblogic server is not installed

All,
We have a build environment where Weblogic server is not installed. We are currently moving from WL8 to WL10 but because of the relative paths in the weblogic.jar for version 10 I cannot figure out what jars I need in order to use the compile utilities without actually having to have the entire WL10 Application server installed on my build machine.
In WL8 we just needed the Weblogic.jar, webservices.jar, and wlManagement.jar.
Now it seems we need wlfullclient.jar webservices.jar and the weblogic.jar and all the jars in the relative classpath for the weblogic.jar, which is a very long list.
Is this really so? Seems shortsighted on Bea's/Oracle's part if we now need to have a full installation of the application server just to use the compile utilities on our build machine.
Any help on what jars to include so as to use wlappc or wlcompile on a build machine where weblogic 10 server is not installed would be appreciated.
Todd Flora

I no longer need help with this, as I have determined to load weblogic on our build machine.

Polestar server is not installed

Hello, I'm trying to install the Polestar application but the server is not installed. I can see the folder C:\Program Files\Business Objects\Polestar12.0" but I don't have the Polestar folder under "C:\Program Files\Business Objects\Tomcat55\webapps"
When I run the installation it asks for the CMS name and the port and finishes successfully but when I try to open the polestar at hhtp://nancy/6405/polestar nothing happens and the screen say "404 Missing Page". I look for the Polestar server in the CMC and nothing related with Polestar is installed.
Can somebody help me?,
Regards,
Nancy

Hello Anton:
You are correct. OID was not bundled with the first release of 9iAS. OID will be bundled with the next release of 9iAS.
However, if you ordered the EE version of 9iAS you should have received an 8.1.7 EE version of Oracle's Database. OID is bundled on the 8.1.7 CD.
A typical installtion of 9iAS would require you to install the 8.1.7 database before installing 9iAS. You can install OID durring your database installation or after.
CAUTION:
The database where OID is to be installed must have been created using the UTF8 character set. Set your NLS_LANG environment variable to AMERICAN_AMERICA.UTF8 prior to database isntallation or OID will never work.
OID can be installed in the same database as 9iAS or in a seperate instance.
If you are still unable to locate OID on your 8.1.7 CD let me know and Ill help you locate it.
Thanks,
Jay
null

Plex Media or Server will not install on MacBook Air OS X 10.8.5 Mountain Lion

I am trying to install Plex Media Plex Server on the latest Mac OS X 10.8.5 - it will not install? Keep getting error. Have to manually open up server from downloads folder - rather than it automatically be on top menu bar like it is suppose to be? I get message that the program is not supported or a recognized Mac software. But I know several have used this media server with the Apple platform and their smart tvs with success - however, on older operating systems.

Since April 22, 2013 Netflix won't stream on my MacBook Pro 17" 2009 ver. Called Netflix support and was given the heave ho. Netflix asked if I used any other device. I told them I use an iPad with a Netflix app and they responded; "If you can successfully stream on one device its not our problem!" And that is Netflix Support response in a nutshell. Apparently, Netflix is trying to disable any device that they feel is simultaneously streaming from a single account. This is a pretty dastardly approach to enforce that policy which Netflix doesn't want new members aware of. I personally feel this is a misquided business approach devoid of any ethics or fair play whatsoever. But what else is new. Time to CANCEL YOUR NETFLIX NOW.

LSH error on installation server: Could not install DS as a service

Hi
we set up an installation server some time ago. In the past all users had administrative privileges therefore no LSH was necessary. Currently we are upgrading from Windows XP to Windows 7 and the users won't be admins anymore. That's why LSH is necessary now.
I tried to set the LSH up, but when I confirmed the DS und IS data in the LSH configuration, the following error appeared:
Could not install DS as a service
The server provides SAP GUI 7.20 PL 8
The installer version is 8.6.1.72 (latest!?) and reffering to note 1587566 didn't result in any solution. A similar problem is mentioned in thread LSH on installation-server fails with "Could not start DS as a service" but it doesn't help me either.
Did anyone figure out similar problems with LSH or knows a workaround/fix?
Kind regards
Jann

I looked into the logs and found the following:
14:00:38 NwSapsAtlC 1   Admin's choice: 'Configure DS'
14:00:38 NwSapSetUI 1
14:00:38 NwSapSetUI 1   UI: Show welcome page
14:00:40 NwSapSetUI 1
14:00:40 NwSapSetUI 1   UI: Show user credentials page
14:00:40 NwSapSetUI 1
14:00:40 NwSapSetUI 1   UI: Show user credentials page
14:00:41 NwSapFeiUt 1E Security: failed to allow to replace process-level token
14:00:41 NwSapFeiUt 1   SERVICE Dep: RPCSS
14:00:41 NwSapFeiUt 1E Failed in call to CreateService in Create Error message: Der Kontoname ist unzulässig oder nicht vorhanden, oder das Kennwort ist für den angegebenen Kontennamen ungültig. Error code 0x00000421 (1057).
14:00:41 NwSapFeiUt 1E Failed in service creation
14:00:41 NwSapAdmin 1E ERROR: Could not install DS as a service.
14:00:41 NwSapSetUI 1
14:00:41 NwSapSetUI 1   UI: Will show finish page now...
14:08:16 NwSapsAtlC 1   Opening XML document 'C:InstServerSetup..SetupServerRecord.xml' (MS XML 3.0 SAX)
14:08:17 NwSapAdmin 1   Engine holds 3 registered event handlers
The password and user is definitly correct!

ORACLE VM Server can not install guest

I have installed ORACLE VM server, it sucks can not use local CD-ROM to install guest, have to mount a remote iso file, but when I use install location nfs:xxx:/path/
got error msg: RPC: not registered.

nfs:xxx:/path/ got error msg: RPC: not registered.this problem is a NFS problem. please verify if NFS server is started successfully or not.
(1)issue "rpcinfo -p" on server to check if portmapper service is ready for NFS.
(2)please make sure you may mount it from command line before hand.
#mount xxx:/path/ /mnt
null

How to Download updates's to server but not install

Got a question from my guys last night. On our Servers, my guys have a small window to download and install updates on our Servers. Between logging onto servers and then Downloading and installing updates from software center
that can take some time.
Is there a way in sccm 2012r2 to have the update download and wait for the user to install it. Most of our client Servers are 2012r2 and some 2008r2 thrown in .

Not directly no.
You can however set the deployment deadline time to sometime way in the future though. This will cause the system to download applicable updates but of course won't automatically install them (until the deadline which is way in the future). The updates will
still be available in the Software Center for installation though.
Jason | http://blog.configmgrftw.com | @jasonsandys

Player (Robotic server) does not install from AUR

The player robotic server available on AUR fails installation with:
builds/player/src/player-3.0.2/server/drivers/shell/readlog.cc:668:43: error: cannot convert ‘FILE* {aka _IO_FILE*}’ to ‘gzFile’ for argument ‘1’ to ‘off_t gzseek(gzFile, off_t, int)’
builds/player/src/player-3.0.2/server/drivers/shell/readlog.cc:714:62: error: cannot convert ‘FILE* {aka _IO_FILE*}’ to ‘gzFile’ for argument ‘1’ to ‘char* gzgets(gzFile, char*, int)’
From this thread about the failed installation of a different package (Pixie) it looks like it is an error related to the zlib version: https://bbs.archlinux.org/viewtopic.php?id=136269
The thread mentions how to fix the issue for Pixie, but I don't know how to replicate the solution for player. The offending lines are:
668 ret = gzseek(this->file,0,SEEK_SET);
and
714 ret = (gzgets(this->file, this->line, this->line_size) == NULL);
can anyone help?
Cheers,
Stefano
UPDATE: after visiting the zlib webpage I tried a different tack: downgrading zlib from 1.2.6 to 1.2.5. PLayer now compiles, but it fails at the linking stage with:
/usr/lib/libxine.so.2: undefined reference to `gzgetc_@ZLIB_1.2.5.2'
Last edited by stefano (2012-03-13 21:39:32)

ALMOST SOLVED:
the file player/src/player-3.0.2/server/drivers/shell/readlog.cc must be changed as follows:
line 668
- ret = gzseek(this->file,0,SEEK_SET);
+ ret = gzseek((gzFile)this->file,0,SEEK_SET);
line 714
- ret = (gzgets(this->file, this->line, this->line_size) == NULL);
+ ret = (gzgets((gzFile)this->file, this->line, this->line_size) == NULL);
Now, can anyone tell me how to convince makepkg to use the fixed file instead of the original one?

DSEE6.3 install. fails when try dsadm create 32bit version not installed

Hellos.
I am a newbie to DS 6.x
I downloaded the SPARC9 .tar.gz and ran the command
./dsee_deploy install -i /data/DSEE63
successfully. I see this on my console...
skipping licence and unzipping output
Do you accept the license terms ? <yes/no> : yes
Check availability of port 11162
Checking running Directory Server instances
Checking running Directory Proxy Server instances
Unzipping sun-ldap-base.zip ...
Unzipping sun-ldap-dsrk6.zip ...
Unzipping sun-ldap-dsrk-man.zip ...
Unzipping sun-ldapcsdk-tools.zip ...
Unzipping sun-ldapcsdk-dev.zip ...
Unzipping sun-ldap-ljdk.zip ...
Unzipping sun-ldap-jre.zip ...
Unzipping sun-ldap-shared.zip ...
Unzipping sun-ldap-shared-l10n.zip ...
Unzipping sun-ldap-directory.zip ...
Unzipping sun-ldap-directory-l10n.zip ...
Unzipping sun-ldap-directory-config.zip ...
Unzipping sun-ldap-directory-man.zip ...
Unzipping sun-ldap-directory-dev.zip ...
Unzipping sun-ldap-mfwk.zip ...
Unzipping sun-ldap-cacao.zip ...
Unzipping sun-ldap-console-agent.zip ...
Unzipping sun-ldap-console-cli.zip ...
Unzipping sun-ldap-console-common.zip ...
Unzipping sun-ldap-console-var.zip ...
Unzipping sun-ldap-jdmk.zip ...
Unzipping sun-ldap-directory-client.zip ...
Unzipping sun-ldap-directory-client-l10n.zip ...
Unzipping sun-ldap-proxy.zip ...
Unzipping sun-ldap-proxy-l10n.zip ...
Unzipping sun-ldap-proxy-man.zip ...
Unzipping sun-ldap-proxy-client.zip ...
Unzipping sun-ldap-proxy-client-l10n.zip ...
Unzipping sun-ldap-console-gui.zip ...
Unzipping sun-ldap-console-gui-help.zip ...
Unzipping sun-ldap-console-gui-l10n.zip ...
Unzipping sun-ldap-console-gui-help-l10n.zip ...
Creating WAR file for Console
Configuring Cacao at /data/DSEE63/dsee6/cacao_2
Setting Cacao parameter jdmk-home with default value [data/DSEE63/dsee6/private]
Setting Cacao parameter java-home with default value [data/DSEE63/jre]
Setting Cacao parameter nss-lib-home with default value [data/DSEE63/dsee6/private/lib]
Setting Cacao parameter nss-tools-home with default value [data/DSEE63/dsee6/bin]
Registering DSCC agent into cacao
Starting Cacao if necessary
Registering JESMF agent into Cacao
Making a copy of dsee_deploy
Making a copy of listrunnings
You can now start your Directory Server Instances
You can now start your Directory Proxy Server Instances
minni#> /data/DSEE63/ds6/bin/dsadm create -p 3890 -P 6360 /data/DSEE63/ds-edu-sk
32-bit version of Directory Server is not installed. dsadm cannot create a 32-bit instance.
What is the problem?
Why is 32bit version of DS not Installed?
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi.
It seems that you are be on a 32-bit SPARC platform (type 'isainfo -b' to check). DSEE6.3 is only supported on 64-bit SPARC platform.
Regards.
Carole.

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

Cannot perform a clean install of CF 10 - ODBC Agent and ODBC Server are not in Services - Win2k8 R2

I've tried to perform a clean install on a Win2k8 R2 x64 server several times and I can't seem to get it to install.
I was upgrading from CF 9, which took several attempts. I eventually got CF 10 working and running with the latest updates. But the server would only run for about 15 minutes and everything would come to a screaching hault. ColdFusion pages would fail to load with no error. The pages would hang and wait for the server to respond, which it never did. Restarting IIS would fix the problem.
I have about 20 CF sites on the machine. I came accross an article that talked about pool sizes, etc. I ended up trying a few things with the Web Server Configuration Tool, and as I was adding/deleting servers, I got an error that some application unexpectedly quit, but it wasn't the wsconfig tool. This happened about 3 times as I was deleting servers that I had previously added. Then I tried loading the CF Admin and I got a 500.0 internal server error.
So I bit the bullet and figured I would start all over again. I uninstalled CF 10... now there's nothing on the machine. Re-installed CF 10, and I get the same 500.0 Internal Server Error. I uninstalled, restarted, installed... same thing. Then I found an error in the event viewer that reads:
The description for Event ID 0 from source ColdFusion 10 ODBC Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 10 ODBC Server error: 0
StartServiceCtrlDispatcher Error!
Then I found out that neither the ColdFusion 10 ODBC Agent or the ColdFusion 10 ODBC Server have been installed... at least they're not showing up in the list of services. msconfig also shows that they don't exist at all. I tried reinstalling several times and I can't get them to show up.
PS: It's 6:15 AM and I've been working on this since 10 PM last night. I NEED HELP! Thanks!

Hello,
Once you move your application from any prior version of ColdFusion to ColdFusion 10, you will have to tune your application, as the architecture changed from JRun to Tomcat.
You can refer to the article http://blogs.coldfusion.com/post.cfm/tuning-coldfusion-10-iis-connector-configuration for parameters, that needs to be tuned appropriately to make CF connector works flawlessly.
Hope this helps
Regards,
Anit Kumar

How do i download the new software onto my computer so then i can install the new itunes? i dont have the mac app thing either and it wont let me do it from the itunes because my server is not working. how do i fix it?

Hey so i have a version of a mac i think it is kinda old, it is the all white one i got it like 4 years ago maybe. I got a new ipod recently and i cannot downloade any music onto it. this is because i tried to download the new itunes which it said i needed and now when i try to install it. It says i need a new software so i try to download that and is says i need the mac app or something. but it says i need the new software to get that. so i went onto itunes and clicked the apple and pressed new software and it goes onto this little thing that says my internet is alright but my server has not been connecting. My computer is connected to my school and they updated the server thing and now it wont connect, so i can't win. how do i fix this and download everything i neew?

First things first: Pull down the Apple Menu and select "about this Mac" and tell us what version of OS X is currently on your computer.

DSC, SQL Server 2012 Enterprise sp2 x64, SQL Server Failover Cluster Install not succeeding

Summary: DSC fails to fully install the SQL Server 2012 Failover Cluster, but the identical code snippet below run in powershell ise with administrator credentials works perfectly as does running the SQL server install interface.
In order to develop DSC configurations, I have set up a Windows Server 2012 R2 failover cluster in VMware Workstation v10 consisting of 3 nodes. All have the same Windows Server 2012 version and have been fully patched via Microsoft Updates.
The cluster properly fails over on command and the cluster validates. Powershell 4.0 is being used as installed in windows.
PDC
Node1
Node2
The DSC script builds up the parameters to setup.exe for SQL Server. Here is the cmd that gets built...
$cmd2 = "C:\SOFTWARE\SQL\Setup.exe /Q /ACTION=InstallFailoverCluster /INSTANCENAME=MSSQLSERVER /INSTANCEID=MSSQLSERVER /IACCEPTSQLSERVERLICENSETERMS /UpdateEnabled=false /IndicateProgress=false /FEATURES=SQLEngine,FullText,SSMS,ADV_SSMS,BIDS,IS,BC,CONN,BOL /SECURITYMODE=SQL /SAPWD=password#1 /SQLSVCACCOUNT=SAASLAB1\sql_services /SQLSVCPASSWORD=password#1 /SQLSYSADMINACCOUNTS=`"SAASLAB1\sql_admin`" `"SAASLAB1\sql_services`" `"SAASLAB1\cubara01`" /AGTSVCACCOUNT=SAASLAB1\sql_services /AGTSVCPASSWORD=password#1 /ISSVCACCOUNT=SAASLAB1\sql_services /ISSVCPASSWORD=password#1 /ISSVCSTARTUPTYPE=Automatic /FAILOVERCLUSTERDISKS=MountRoot /FAILOVERCLUSTERGROUP='SQL Server (MSSQLSERVER)' /FAILOVERCLUSTERNETWORKNAME=SQLClusterLab1 /FAILOVERCLUSTERIPADDRESSES=`"IPv4;192.168.100.15;LAN;255.255.255.0`" /INSTALLSQLDATADIR=M:\SAN\SQLData\MSSQLSERVER /SQLUSERDBDIR=M:\SAN\SQLData\MSSQLSERVER /SQLUSERDBLOGDIR=M:\SAN\SQLLogs\MSSQLSERVER /SQLTEMPDBDIR=M:\SAN\SQLTempDB\MSSQLSERVER /SQLTEMPDBLOGDIR=M:\SAN\SQLTempDB\MSSQLSERVER /SQLBACKUPDIR=M:\SAN\Backups\MSSQLSERVER > C:\Logs\sqlInstall-log.txt "
Invoke-Expression $cmd2
When I run this specific command in Powershell ISE running as administrator, logged in as domain account that is in the Node1's administrators group and has domain administrative authority, it works perfectly fine and sets up the initial node properly.
When I use the EXACT SAME code above pasted into my custom DSC resource, as a test with a known successful install, run with the same user as above, it does NOT completely install the cluster properly. It still installs 17 applications
related to SQL Server and seems to properly configure everything except the cluster. The Failover Cluster Manager shows that the SQL Server Role will not come on line and the SQL Server Agent Role is not created.
The code is run on Node1 so the setup folder is local to Node1.
The ConfigurationFile.ini files for the two types of installs are identical.
Summary.txt does have issues..
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred during the setup process of the feature.
Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name:                SQL Server Database Engine Services Instance Features
Component error code:          0x86D8003A
Error description:             The cluster resource 'SQL Server' could not be brought online. Error: There was a failure to call cluster code from a provider. Exception message: Generic
failure . Status code: 5023. Description: The group or resource is not in the correct state to perform the requested operation. .
It feels like this is a security issue with DSC or an issue with the setup in SQL Server, but please note I have granted administrators group and domain administrators authority. The nodes were built with the same login. Windows firewall
is completely disabled.
Please let me know if any more detail is required.

Hi Lydia,
Thanks for your interest and help.
I tried "Option 3 (recommended)" and that did not help.
The issue I encounter with the fail-over cluster only occurs when trying to install with DSC!
Using the SQL Server Install wizard, Command Prompt and even in Powershell by invoking the setup.exe all work perfectly.
So, to reiterate, this issue only occurs while running in the context of DSC.
I am using the same domain login with Domain Admin Security and locally the account has Administrators group credentials. The SQL Server Service account also has Administrators Group Credentials.

HP Office Jet Pro 8600 Plus 910 n printer driver does not install on a windows server 2008R2 OS

I recently had a new server installed, a Proliant with a Windows Server 2008R2 operating system. I now just discovered that my All in One Office Jet Pro 8600 Plus A 910 will not install on the Windows Server 2008 R2, ïncompatible operating system. Does anybody have a workaround or solution?

Hello dawnp,
Welcome to the HP Forums.
I see that you are having an issue with installing the printer on to your Windows 7 computer.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it failed as well as any error codes you may see.
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

LiveCache lock server is not installed

Similar Messages

Maybe you are looking for