Livecache lock server not accessible after system refresh
Hello,
I have performed a refresh of SCM + livecache from production to QA when starting the livacache from LC10 i get a message Livecache lock server not accessible. The livecache is started but when i look at the status there is a warning SQL access not possible.
I did an export of the config table and reimport and the server named are correctly defined for:
LCA
LDA
LEA
From the administration report of LCA
Initialize livecache
Follow-up Processing: /SAPAPO/DELETE_LC_ANCHORS
Start Livecache
Follow-up Processing: SLCA_LCK_SYNCHOWNERS
By running those program in se38
SLCA_LCK_SYNCHOWNERS (Livecache lock server not accessible)
SLCA_NON_LC_RELEVANT_CLIENT (Could not create a connection to livecache)
I checked and the relevant client is selected.
When i check the alert monitor from livecache - lca - connectivity - dbmrfc and native sql is in red with the following message:
SQL Statement Execution Instance Online, but no SQL access possible.
Also from SM21 i have errors saying Database error -4025 at CON
Let me know if you already encountered this issue and how it was resolved.
Thank you,
Martin Mayer
Edited by: Martin Mayer on Jan 4, 2012 4:02 PM
Edited by: Martin Mayer on Jan 4, 2012 4:07 PM
I have checked that tread already the thing is when performing the check In db59, I´ve the LCA,LDA,LEA it fails.
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
SQL Code: 4025
Edited by: Martin Mayer on Jan 4, 2012 5:26 PM
Similar Messages
-
LiveCache lock server is not installed
Hi All,
Job /SAPAPO/OM_DELETE_OLD_SIMSESS has been failed:
Job log says:
Job started
Step 001 started (program /SAPAPO/OM_DELETE_OLD_SIMSESS, variant , user ID BATCHSCHE)
evaluate oms_versions
evaluate simsession delta
obsolete transactional simulations
<b>liveCache lock server is not installed</b>
Job cancelled after system exception ERROR_MESSAGE
Same was finished successfully and its job log says:
Job started
Step 001 started (program /SAPAPO/OM_DELETE_OLD_SIMSESS, variant , user ID BATCHSCHE)
evaluate oms_versions
evaluate simsession delta
obsolete transactional simulations
Job finished
liveCache lock server is not installed seems to be extra.Any hint?
Thanks in advance.
Regards,
TusharHello,
Just forgot to give server details:
KERNEL 7.6.01 BUILD 009-123-141-487
DBMServer 7.6.01 Build 009-123-141-487
SCM basis 700 sp 11
Regards,
Tushar -
Logical System Conversion after system refresh failed
Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started 00 516 S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD) 00 550 S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system PO 349 I
02/18/2009 16:10:19 Job finished 00 517 S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
MaheshHi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks. -
Livecache lock handler not available in APO
Hello Experts,
We are getting the error "Livecache lock handler not available" error when we are running planning jobs in SAP APO.
We are using parallel processing profiles for DP background processing jobs (Macro calculations) and I am getting this error only when a job is run with PP profile.
Below are the parameters of the parallel processing profiles:
Application: DP background processing
No of parallel processes: 2
Block Size: 500
The error message is written in the spool generated for the background job and the job fails. Eventually the process chain fails in which the job is included.
Please provide some pointers if anyone has come across the same error.
Regards,
RaghuHi JB,
Thanks for the note, Basis check the solution in the note and system seems to have met the requirements.
But one thing is likely to increase the MaxSQLLocks in the system as the demand of the locks is more than the availability. So basis is looking at this dimension to increase the number of locks in the system.
Will update soon in case of any conclusion.
Regards,
Raghu -
Livecache lock handler not available
Hello Experts,
We are getting the error "Livecache lock handler not available" error when we are running planning jobs in SAP APO.
We are using parallel processing profiles for DP background processing jobs (Macro calculations) and I am getting this error only when a job is run with PP profile.
Below are the parameters of the parallel processing profiles:
Application: DP background processing
No of parallel processes: 2
Block Size: 500
The error message is written in the spool generated for the background job and the job fails. Eventually the process chain fails in which the job is included.
Please provide some pointers if anyone has come across the same error.
Regards,
RaghuHi JB,
Thanks for the note, Basis check the solution in the note and system seems to have met the requirements.
But one thing is likely to increase the MaxSQLLocks in the system as the demand of the locks is more than the availability. So basis is looking at this dimension to increase the number of locks in the system.
Will update soon in case of any conclusion.
Regards,
Raghu -
After System Refresh Variants missing
Hi,
We have used Export / Import method to build QAS system from production
ABAP export file.
After System refresh we got the same Production client with all
configurations, Variants, Object including data.. Which is Perfect.
But, as per our business we don't want to use the same production
client number in Quality System., so we done Cliet Copy to copy to
different client (ex: Client 200) using SAP_ALL profile.
Question: But after client copy we found that some Data, Objects,
Variants are missing in the new client (200).
Ex: In Client 100 (Copy of production client) table T009 is having 10
entries, but after client copy in client 200 the same table doesn't have any
entry in that including standard and Z.
Please help me on this, how do I get clone / copy of 100 client
(original client)
Thank You,
RameshHi Ramesh,
Looks like your client copy didn't bring all the data and Objects, Did you checked logs, Is there any error message ? The client copy completed with all the tables ?
You can try Remote client copy method .
You can manually export the variants from the source client to Target client and you need to export the Variants from the table VARID, VARI, VARIT and VARIS.
You can use the below forum procedure to export and import variants.
how to export RFC destination to file in order to import it in an other sys
Since, not only the variants you are missing data and Objects, I would suggest for re-copy the client.
Regards,
Arjun -
Error Code 150:30 Photoshop Will Not Open after System Software crash
Error Code 150:30 Photoshop Will Not Open after System Software crash
if mac os,Error "Licensing has stopped working" | Mac OS
-
SAP License issue after system refresh.
Hi,
After system refresh, refreshed system has License info of source system. When trying to apply license from unix, it gives below error, saying system number is incorrect to apply new license. Looks the system number of source system is causing issue. I checked, there is no data in MLICHECK table. I could see some info in "saplikey" table. System is 700 system.
sidadm> saplikey -install "/home/SID/sid_multiple.txt pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS01_sapsidci
This system's system number is "000000000710287641", but there is a license key
for system number "000000000711311441" in file "/home/SID/sid_multiple.txt".
sidadm>
Thanks.First check whether you have deleted all invalid licenses?
use below command to delete invalid licenses
sidadm>saplicense -delete
And apply new license based on new hardwarekey with below command
sidadm>saplicense -install
*I think there should be some invalid licenses lying in your system
Regards
Nick Loy -
TS2621 why my outgoing mail server not working after ios 6 upgraded
why my outgoing mail server not working after ios 6 upgraded
Ask your carrier to send you the settings over wifi and then install them that way.
I'm on giffgaff and I used the giffgaff app from the store to sort this out.
Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
Very Poor indeed and I held off using Apple products for years for this very reason!! -
HT4623 Iphone 4s auto lock is not working after updating ios6
my Iphone 4s auto lock is not working after updating ios6 i restore 3 times but still geting problem
Hello, Chirag25.
Thank you for visiting Apple Support Communities.
I understand that you are having an issue with the back camera. Here is a troubleshooting article that I would recommend going through. If none of the troubleshooting steps resolve the issue, see step 4.
Get help with the camera on your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT203040
Cheers,
Jason H. -
Windows 8.1 will not activate on HP19-2113w after system refresh.
Everything was working fine on my PC. Then the other day it crashed and said there was a disk error and that it had to scan the whole drive to find the error. It finished scanning, but windows 8.1 would not load sucessfully. Therefore I did a system refresh thru HP recovery. After doing that windows would start up normally, but I lost my activation. When I tried to activate the response was "Key doesn't work try again later" or something like that. Kept trying, no luck. I thought it may have been an error with the system refresh, so I did the total system reset (after saving personal data). Now I am having the same problem with activation, and If I try to navigate the normal way to the activation screen, the screen disapears. I can get to activation using command prompt. but key still does not work. The key I am using I retrived from my BIOS data. Also, I ran the refresh and reset from the origional hard drive partition. I hope someone has a solution to this. Thanks is advance Bill
Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer will not activate after performing a system refresh, and I would be happy to assist you in this matter! In order to correct this issue, I suggest following the steps in this resource on Windows 8 product activation, which should help to activate Windows 8.1 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards -
Sender File Comm Channel Fails after system refresh
Hi,
we did a system refresh of our PI system and since then the sender file communication channels donot work with the following exception:
Error: com.sap.aii.af.ra.ms.api.ConfigException: Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available.
I have seen many threads in this forum related to this issue but couldn't find a proper solution.
Any help is very much appreciated.
Thanks
MLSYou may do the following:
1. Perform SLDCHECK on XI.
2. Check if XIAFUSER is not locked or its password has been changed recently.
3. Goto SLD-> Business sytems-> Integration server, check Pipeline URL. It should be
http://hostname:8000/sap/xi/engine?type=entry
Regards,
Prateek -
Java Dispatcher Down but Server0 and SDM up after system refresh
Hello,
I have done system refresh from PRD to QAS of CRM system - dual stack.Once after the system refresh ABAP is up and running fine but Java is down (Only Dispatcher is down. Both SDM and Server0 are running fine).
I have followed Note 609603 - Problems with Multiple NICs and SAP J2EE Engine and have given the correct host name but the no luck..
std_dispatcher.out says the following error:
Cannot attach to the Message Server. Can't open port [3925] on host [<Source Host Name>/Source IP Address].
Could you please let me know if I need to do any changes in the Config tool?
Thanks,
SubbuHI,
IN DB restore the hostname of java system stored in profiles would be your PRD.
Go to Configtool in Edit mode -- cluster --> change the hostnames in Instance profile -- and under other files like bootstrap etc whereever you find PRD hostname.
And otherwise for JAVA system you should use export/import option.
Regards,
Tajinder -
TMS, profiles after System Refresh
Hi All,
I have done a system refresh from PD1(old prod) to PRD(new prod) on new server.
I faced following problem after the refresh.
1. The instance profile of PD1 had many parameter.., after copying that in PRD, sap wont start. So I have commented many of those parameter from the instance profile of PRD?
2. After the refresh, since PRD doesnt have the transport request of PD1, how do I put those request to PRD?
I have the backup of \trans folder of PD1.
Regards
PrashHi,
Rename the file from \trans\buffer\HD1 to PRD worked!!!
-> the only concern if transport buffer is clean up in between then some request was missing in import queue of PRD.
zcsa/installed_languages = DE
this should be ED
zcsa/system_language = E is OK.
install/codepage/appl_server = 1100 -> this is for codepage installed on your application server
I get message like PXA_NO_SHARED_MEMORY occured
and SYSTEM_NO_ROLL occured..
-> are you using 32 bit OS ?
check Note 103747 - Performance: Parameter recommendations as of Release 4.0
Note 88416 - Zero administration memory management as of 4.0A/ Windows
also consider Note 129813 - Windows: Problems due to address space fragmentation
regards,
kaushal -
Keyboard delete and caps lock keys not working after update
Shortly after a windows update two keys, delete and caps lock do not work. I have tried the following
1. system restore..it says it cannot restore as a file is missing. I have used this function before without any problem.
2. Update key board driver (standard PS/2)..it says latest version is installed.
3. Uninstall and reinstall.
4. Reset using the remove batteryt hold down power key option.
The caps lock and delete does not work in Notepad or MS Word.
It seems unlikely that the two keys themselves are damaged as it is unlikely that they would both fail at the same time and the problem after the windows undate is suspicious.
I am using Windows 7 Home premium on a 64 bit HP G62.
help appreciated as ever
thanks
matyiiimatyiii wrote:
Thanks I am beginning to suspect the same thing. I will try keyboard replacement as a last resort.....no fun to buy a new key board and have the problem persist...
regards
Matyiii
Here's another test...since your laptop has USB ports get or borrow a USB keyboard and try it and if all those keys work and test then the results would mean your laptop keyboard has stop functioning as least you narrow done the problem.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-
Maybe you are looking for
-
Installation of oracle9i2 on redhat advanced server
I installed linux advanced server3.When i try to install oracle9i2 when i am running the runinstaller i am getting these errors initialising java virtual machine from /tmp/orainstall /jre/bin/java please wait /jre/bin/.386/native_threads/java.. error
-
I am unable to transfer photos from my camera roll to a shared photo stream.
I have be able to get 297 pics over to a shared photo stream, but it is very temperamental. Ever since I started trying to transfer over photos, my iphone 5 has been ating up. Apps close on there own. I have reset and restarted my phone many many tim
-
How to display array values in jsp of screen flows
Hi, can u please help me . I am having one array variable i have stored all the values but i have to display that in JSP page .how to display Edited by: user12171025 on Nov 4, 2009 11:11 PM
-
Anyone else seeing a double arrow?
Hi all- Frequently when I am using LR4, from the intial to the latest patch, I have a very persistent double arrow. The double arrow is the one that points left and right, and is intended to occur when you are hovering over the side of a window pane
-
MyFaces 1.2.2 app fails with "Resources framework is not initialised"
I did google around for this, but I can't find a clear solution to this. I was previously playing with an app using MyFaces 1.1.5 and got to a certain level of success. I'm now trying to build an app for Tomcat 6, using MyFaces 1.2.2. I added all the